Top Cited Articles
(1199 articles with 14222 citations as of July 2024)

• Management of Water Resources in Iraq: Perspectives and Prognoses, Engineering, Vol.5 No.8, 2013
• Nadhir A. Al-Ansari
• Citations: 330 (Details)

• Reliability-Centered Maintenance Methodology and Application: A Case Study, Engineering, Vol.2 No.11, 2010
• Islam H. Afefy
• Citations: 212 (Details)

• Role of Plasma Surface Treatments on Wetting and Adhesion, Engineering, Vol.2 No.6, 2010
• Rory Wolf, Amelia Carolina Sparavigna
• Citations: 198 (Details)

• Effect of Welding on Microstructure and Mechanical Properties of an Industrial Low Carbon Steel, Engineering, Vol.2 No.7, 2010
• Zakaria Boumerzoug, Chemseddine Derfouf, Thierry Baudin
• Citations: 150 (Details)

• A Study on Mechanical Properties of PMMA/Hydroxyapatite Nanocomposite, Engineering, Vol.3 No.8, 2011
• S. M. Zebarjad, S. A Sajjadi, T. Ebrahimi Sdrabadi, S. A Sajjadi, A Yaghmaei, B Naderi
• Citations: 148 (Details)

• Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study, Engineering, Vol.3 No.2, 2011
• Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos
• Citations: 126 (Details)

• Contrast Limited Adaptive Histogram Equalization for Qualitative Enhancement of Myocardial Perfusion Images, Engineering, Vol.5 No.10B, 2013
• Neethu M. Sasi, V. K. Jayasree
• Citations: 102 (Details)

• Hydro-Politics of the Tigris and Euphrates Basins, Engineering, Vol.8 No.3, 2016
• Nadhir Al-Ansari
• Citations: 98 (Details)

• Optimization of Biodynamic Seated Human Models Using Genetic Algorithms, Engineering, Vol.2 No.9, 2010
• Wael Abbas, Ossama B. Abouelatta, Magdi El-Azab, Mamdouh Elsaidy, Adel A. Megahed
• Citations: 96 (Details)

• Skyhook Surface Sliding Mode Control on Semi-Active Vehicle Suspension System for Ride Comfort Enhancement, Engineering, Vol.1 No.1, 2009
• Yi Chen
• Citations: 95 (Details)

• Nanocellulose-Based Biosensors: Design, Preparation, and Activity of Peptide-Linked Cotton Cellulose Nanocrystals Having Fluorimetric and Colorimetric Elastase Detection Sensitivity, Engineering, Vol.5 No.9A, 2013
• J. Vincent Edwards, Nicolette Prevost, Alfred French, Monica Concha, Anthony DeLucca, Qinglin Wu
• Citations: 94 (Details)

• A GIS-Based Drastic Model for Assessing Aquifer Vulnerability in Amman-Zerqa Groundwater Basin, Jordan, Engineering, Vol.5 No.5, 2013
• Abdulla M. Al-Rawabdeh, Nadhir A. Al-Ansari, Ahmed A. Al-Taani, Sven Knutsson
• Citations: 90 (Details)

• Progress in Antimonide Based III-V Compound Semiconductors and Devices, Engineering, Vol.2 No.8, 2010
• Chao Liu, Yanbo Li, Yiping Zeng
• Citations: 81 (Details)

• Detailed Analysis of Micro-Grid Stability during Islanding Mode under Different Load Conditions, Engineering, Vol.3 No.5, 2011
• Rashad M. Kamel, A. Chaouachi, Ken Nagasaka
• Citations: 78 (Details)

• Dissimilar Welding of Superduplex Stainless Steel/HSLA Steel for Offshore Applications Joined by GTAW, Engineering, Vol.2 No.7, 2010
• Bravo Ivan Mendoza, Zepeda Cuauhtemoc Maldonado, Hernandez Apolinar Albiter, Piedras Eduardo Robles
• Citations: 76 (Details)

• Mathematical Theory and Methods of Mechanics of Quasicrystalline Materials, Engineering, Vol.5 No.4, 2013
• Tian You Fan
• Citations: 76 (Details)

• Engineering of Carbonate Apatite Bone Substitute Based on Composition-Transformation of Gypsum and Calcium Hydroxide, Engineering, Vol.2 No.5, 2010
• Ika D. Ana, Shigeki Matsuya, Kunio Ishikawa
• Citations: 74 (Details)

• Comparative Study of Various Preparation Methods of Colloidal Silica, Engineering, Vol.2 No.12, 2010
• Hyung Mi Lim, Jinho Lee, Jeong-Hwan Jeong, Seong-Geun Oh, Seung-Ho Lee
• Citations: 73 (Details)

• MHD Flow, and Heat Transfer with Effects of Buoyancy, Viscous and Joules Dissipation over a Nonlinear Vertical Stretching Porous Sheet with Partial Slip, Engineering, Vol.3 No.3, 2011
• M. Subhas Abel, Kulkarni Anant Kumar, R. Ravikumara
• Citations: 70 (Details)

• Design, Modeling and Analysis of Implementing a Multilayer Piezoelectric Vibration Energy Harvesting Mechanism in the Vehicle Suspension, Engineering, Vol.4 No.11, 2012
• Wiwiek Hendrowati, Harus Laksana Guntur, I. Nyoman Sutantra
• Citations: 70 (Details)

• The Stability of Cylindrical Shells Containing an FGM Layer Subjected to Axial Load on the Pasternak Foundation, Engineering, Vol.2 No.4, 2010
• Abdullah Heydaroglu Sofiyev, Mehmet Avcar
• Citations: 69 (Details)

• Expected Future Precipitation in Central Iraq Using LARS-WG Stochastic Weather Generator, Engineering, Vol.6 No.13, 2014
• Yassin Osman, Nadhir Al-Ansari, Mawada Abdellatif, Sadeq B. Aljawad, Sven Knutsson
• Citations: 69 (Details)

• Finite Element Analysis of Contact Pressures between Seat Cushion and Human Buttock-Thigh Tissue, Engineering, Vol.2 No.9, 2010
• Chak Yin Tang, Wai Chan, Chi Pong Tsui
• Citations: 64 (Details)

• Application of Least Square Support Vector Machine (LSSVM) for Determination of Evaporation Losses in Reservoirs, Engineering, Vol.3 No.4, 2011
• Pijush Samui
• Citations: 64 (Details)

• CFD Analysis of Single and Multiphase Flow Characteristics in Elbow, Engineering, Vol.4 No.4, 2012
• Quamrul H. Mazumder
• Citations: 63 (Details)

• Enhanced Mass Transfer in Microbubble Driven Airlift Bioreactor for Microalgal Culture, Engineering, Vol.5 No.9, 2013
• Kezhen Ying, Mahmood K. H. Al-Mashhadani, James O. Hanotu, Daniel J. Gilmour, William B. Zimmerman
• Citations: 61 (Details)

• Electronic Throttle Control System: Modeling, Identification and Model-Based Control Designs, Engineering, Vol.5 No.7, 2013
• Robert N. K. Loh, Witt Thanom, Jan S. Pyko, Anson Lee
• Citations: 58 (Details)

• Stress Analysis of Crane Hook and Validation by Photo-Elasticity, Engineering, Vol.3 No.9, 2011
• Rashmi Uddanwadiker
• Citations: 58 (Details)

• Developing Intensity-Duration-Frequency Curves in Scarce Data Region: An Approach using Regional Analysis and Satellite Data, Engineering, Vol.3 No.3, 2011
• Ayman G. Awadallah, Mohamed ElGamal, Ashraf ElMostafa, Hesham ElBadry
• Citations: 56 (Details)

• Decorating and Filling of Multi-Walled Carbon Nanotubes with TiO₂ Nanoparticles via Wet Chemical Method, Engineering, Vol.5 No.2, 2013
• Sedigheh Abbasi, Seyed Mojtaba Zebarjad, Seyed Hossein Noie Baghban
• Citations: 56 (Details)

• Developing Situations of Tea Plucking Machine, Engineering, Vol.6 No.6, 2014
• Yu Han, Hongru Xiao, Guangming Qin, Zhiyu Song, Wenqin Ding, Song Mei
• Citations: 56 (Details)

• Groundwater Vulnerability Mapping Using Lineament Density on Standard DRASTIC Model: Case Study in Halabja Saidsadiq Basin, Kurdistan Region, Iraq, Engineering, Vol.7 No.10, 2015
• Twana O. Abdullah, Salahalddin S. Ali, Nadhir A. Al-Ansari, Sven Knutsson
• Citations: 56 (Details)

• Influence of Groundwater Hypothetical Salts on Electrical Conductivity Total Dissolved Solids, Engineering, Vol.8 No.11, 2016
• S. A. M. Al Dahaan, Nadhir Al-Ansari, Sven Knutsson
• Citations: 55 (Details)

• Aging Effect on Characteristics of Oil Impregnated Insulation Paper for Power Transformers, Engineering, Vol.5 No.1, 2013
• Loai S. Nasrat, Nesrine Kassem, Nadia Shukry
• Citations: 54 (Details)

• Microwave-Assisted Synthesis of Silver Nanoparticles in Alkalic Carboxymethyl Chitosan Solution, Engineering, Vol.2 No.5, 2010
• Binghui Wang, Xupin Zhuang, Wenjian Deng, Bowen Cheng
• Citations: 54 (Details)

• Profile Modification for Increasing the Tooth Strength in Spur Gear Using CAD, Engineering, Vol.2 No.9, 2010
• Shanmugasundaram Sankar, Maasanamuthu Sundar Raj, Muthusamy Nataraj
• Citations: 53 (Details)

• The Development of Self-Balancing Controller for One-Wheeled Vehicles, Engineering, Vol.2 No.4, 2010
• Chung-Neng Huang
• Citations: 53 (Details)

• Texture ZnO Thin-Films and their Application as Front Electrode in Solar Cells, Engineering, Vol.2 No.12, 2010
• Yue-Hui Hu, Yi-Chuan Chen, Hai-Jun Xu, Hao Gao, Wei-Hui Jiang, Fei Hu, Yan-Xiang Wang
• Citations: 53 (Details)

• An Application Expert System for Evaluating Effective Factors on Trust in B2C WebsitesTrust, Security, ANFIS, Fuzzy Logic, Rule Based Systems, Electronic Commerce, Engineering, Vol.3 No.11, 2011
• Mehrbakhsh Nilashi, Karamollah Bagherifard, Othman Ibrahim, Nasim Janahmadi, Mousa Barisami
• Citations: 53 (Details)

• Effects of Gas Nitriding on the Mechanical and Corrosion Properties of SACM 645 Steel, Engineering, Vol.3 No.9, 2011
• Shu-Hung Yeh, Liu-Ho Chiu, Heng Chang
• Citations: 52 (Details)

• Highly Nonlinear Bending-Insensitive Birefringent Photonic Crystal Fibres, Engineering, Vol.2 No.8, 2010
• Huseyin Ademgil, Shyqyri Haxha, Fathi AbdelMalek
• Citations: 51 (Details)

• Study on the Layout of 15-Minute Community-Life Circle in Third-Tier Cities Based on POI: Baoding City of Hebei Province, Engineering, Vol.11 No.9, 2019
• Zeqin Li, Jie Zheng, Yukun Zhang
• Citations: 49 (Details)

• Rheological Properties of Cement-Based Grouts Determined by Different Techniques, Engineering, Vol.6 No.5, 2014
• Mohammed Hatem Mohammed, Roland Pusch, Sven Knutsson, Gunnar Hellström
• Citations: 48 (Details)

• Microstrip Antennas Loaded with Shorting Post, Engineering, Vol.1 No.1, 2009
• Pradeep Kumar, G. Singh
• Citations: 48 (Details)

• Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning, Engineering, Vol.2 No.6, 2010
• D. Philip Selvaraj, P. Chandramohan
• Citations: 47 (Details)

• Prediction of Natural Frequency of Laminated Composite Plates Using Artificial Neural Networks, Engineering, Vol.4 No.6, 2012
• Mutra Raja Sekhara Reddy, Bathini Sidda Reddy, Vanguru Nageswara Reddy, Surisetty Sreenivasulu
• Citations: 47 (Details)

• Effects Residence Time to Water Quality in Large Water Distribution Systems, Engineering, Vol.5 No.4, 2013
• Hossein Shamsaei, Othman Jaafar, Noor Ezlin Ahmad Basri
• Citations: 47 (Details)

• Selection of a Suitable Wavelet for Cognitive Memory Using Electroencephalograph Signal, Engineering, Vol.5 No.5B, 2013
• S. Z. Mohd Tumari, R. Sudirman, A. H. Ahmad
• Citations: 46 (Details)

• Enhancement in Elastic Modulus of GFRP Bars by Material Hybridization, Engineering, Vol.5 No.11, 2013
• Dong-Woo Seo, Ki-Tae Park, Young-Jun You, Hyeong-Yeol Kim
• Citations: 46 (Details)

• Automotive Ride Comfort Control Using MR Fluid Damper, Engineering, Vol.4 No.4, 2012
• Mahmoud El-Kafafy, Samir M. El-Demerdash, Al-Adl Mohamed Rabeih
• Citations: 45 (Details)

• Performance and Combustion Characteristics of SINGLE Cylinder Diesel Engine Running on Karanja Oil/Diesel Fuel Blends, Engineering, Vol.3 No.4, 2011
• Siddalingappa R. Hotti, Omprakash Hebbal
• Citations: 45 (Details)

• Structural Deformation Monitoring and Analysis of Highway Bridge Using Accurate Geodetic Techniques, Engineering, Vol.7 No.8, 2015
• Ashraf Abd El-Wanis Beshr
• Citations: 43 (Details)

• Monitoring and Evaluating the Sedimentation Process in Mosul Dam Reservoir Using Trap Efficiency Approaches, Engineering, Vol.7 No.4, 2015
• Issa E. Issa, Nadhir Al-Ansari, Sven Knutsson, Govand Sherwany
• Citations: 42 (Details)

• Studies on Chemical Resistance of PET-Mortar Composites: Microstructure and Phase Composition Changes, Engineering, Vol.5 No.4, 2013
• Ahmed Soufiane Benosman, Mohamed Mouli, Hamed Taibi, Mohamed Belbachir, Yassine Senhadji, Ilies Bahlouli, David Houivet
• Citations: 42 (Details)

• Effect of Local and Global Scour on Lateral Response of Single Piles in Different Soil Conditions, Engineering, Vol.4 No.6, 2012
• Yasser E. Mostafa
• Citations: 41 (Details)

• Assessing Sprinkler Irrigation Performance Using Field Evaluations at the Medjerda Lower Valley of Tunisia, Engineering, Vol.4 No.10, 2012
• Samir Yacoubi, Khemaies Zayani, Adel Slatni, Enrique Playán
• Citations: 41 (Details)

• Ultrasonic Technology for Enhanced Oil Recovery, Engineering, Vol.6 No.4, 2014
• Anna Abramova, Vladimir Abramov, Vadim Bayazitov, Artyom Gerasin, Dmitriy Pashin
• Citations: 41 (Details)

• Automatic Mexican Sign Language Recognition Using Normalized Moments and Artificial Neural Networks, Engineering, Vol.8 No.10, 2016
• Francisco Solís, David Martínez, Oscar Espinoza
• Citations: 41 (Details)

• Solar Thermal Systems Performances versus Flat Plate Solar Collectors Connected in Series, Engineering, Vol.4 No.12, 2012
• Khaled Zelzouli, Amenallah Guizani, Ramzi Sebai, Chakib Kerkeni
• Citations: 40 (Details)

• Development and Assessment of Thermoacoustic Generators Operating by Waste Heat from Cooking Stove, Engineering, Vol.4 No.12, 2012
• Baiman Chen, Abdalla A. Yousif, Paul H. Riley, David B. Hann
• Citations: 40 (Details)

• Comparison Studies on Dynamic Packaging Properties of Corrugated Paperboard Pads, Engineering, Vol.2 No.5, 2010
• Yanfeng Guo, Wencai Xu, Yungang Fu, Wei Zhang
• Citations: 40 (Details)

• A Framework for Intelligent Decision Support System for Traffic Congestion Management System, Engineering, Vol.2 No.4, 2010
• Mohamad K. Hasan
• Citations: 40 (Details)

• Electrochemical Generation of Zn-Chitosan Composite Coating on Mild Steel and its Corrosion Studies, Engineering, Vol.2 No.8, 2010
• Kanagalasara Vathsala, Thimmappa Venkatarangaiah Venkatesha, Beekanahalli Mokshanatha Praveen, Kudlur Onkarappa Nayana
• Citations: 39 (Details)

• Harmonic Measurement and Analysis during Electric Vehicle Charging, Engineering, Vol.5 No.1B, 2013
• MohdZamriChe Wanik, Mohd FadzilMohd Siam, Afida Ayob, Subi yanto, Azah Mohamed, Abu HanifahAzit, Saharuddin Sulaiman, Mohamed Azrin Mohamed Ali, Zahrul Faizi Hussein, Ahmad Kamil MatHussin
• Citations: 39 (Details)

• Arbuscular Mycorrhizal Technology in Reclamation and Revegetation of Coal Mine Spoils under Various Revegetation Models, Engineering, Vol.2 No.9, 2010
• Akhilesh Kumar, Richa Raghuwanshi, Ram Swaroop Upadhyay
• Citations: 38 (Details)

• Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant, Engineering, Vol.2 No.10, 2010
• Jeong-Du Kim, Keon-Beom Lee
• Citations: 38 (Details)

• Condition-Based Diagnostic Approach for Predicting the Maintenance Requirements of Machinery, Engineering, Vol.1 No.3, 2009
• C. I. UGECHI, E. A. OGBONNAYA, M. T. LILLY, S. O. T. OGAJI, S. D. PROBERT
• Citations: 38 (Details)

• Functional Copolymer/Organo-MMT Nanoarchitectures. VIII. Synthesis, Morphology and Thermal Behavior of Poly(maleic anhydride-alt-acrylamide)-Organo-MMT Clays Nanohybrids, Engineering, Vol.3 No.1, 2011
• Zakir M. O. Rzayev, Burcu Şenol, Ernur A. Soylemez
• Citations: 38 (Details)

• Improving Laser Beam Welding Efficiency, Engineering, Vol.6 No.9, 2014
• Mikhail Sokolov, Antti Salminen
• Citations: 38 (Details)

• Turbulent Modulation in Particulate Flow: A Review of Critical Variables, Engineering, Vol.7 No.10, 2015
• Ammar Saber, T. Staffan Lundström, J. Gunnar I. Hellström
• Citations: 38 (Details)

• Determination of the Law of Motion of the Yarn in the Spin Intensifier, Engineering, Vol.11 No.5, 2019
• Sherzod Ahmadjanovich Korabayev, Mardonov Botir Mardonovich, Matismailov Saypila Lolashbayevich, Melibоyev Umarjоn Xaydarоvich
• Citations: 37 (Details)

• Distributed Intelligent Microgrid Control Using Multi-Agent Systems, Engineering, Vol.5 No.1B, 2013
• Il-Yop Chung, Cheol-Hee Yoo, Sang-Jin Oh
• Citations: 37 (Details)

• Applying Geographic Information System (GIS) for Maintenance Strategy Selection, Engineering, Vol.4 No.1, 2012
• Asma Thamir Ibraheem, Dua’a Abd Al-Razzaq Falih
• Citations: 36 (Details)

• Research on Cost Overrun Risk of Construction Phase of Vietnam Highway International Contracting Project, Engineering, Vol.8 No.3, 2016
• Hong Anh Vu, Jianqiong Wang, Lianxing Min, Sy Hung Mai, Hong Phong Nguyen
• Citations: 36 (Details)

• Surface Modification on Ti-30Ta Alloy for Biomedical Application, Engineering, Vol.5 No.9, 2013
• Patricia Capellato, Nicholas A. Riedel, John D. Williams, Joao P. B. Machado, Ketul C. Popat, Ana P. R. Alves Claro
• Citations: 35 (Details)

• Sliding Mode Control, with Integrator, for a Class of Mimo Nonlinear Systems, Engineering, Vol.3 No.5, 2011
• Anouar Benamor, Larbi Chrifi-alaui, Hassani Messaoud, Mohamed Chaabane
• Citations: 35 (Details)

• Delamination in Fiber Reinforced Plastics: A Finite Element Approach, Engineering, Vol.3 No.5, 2011
• P. K. Rakesh, V. Sharma, I. Singh, D. Kumar
• Citations: 35 (Details)

• Radiation Effects on Free Convection Flow Neara Vertical Plate with Ramped Wall Temperature, Engineering, Vol.3 No.12, 2011
• Rudra Kanta Deka, Sankar Kumar Das
• Citations: 34 (Details)

• Optimization of Bead Geometry in CO₂ Laser Welding of Ti 6Al 4V Using Response Surface Methodology, Engineering, Vol.3 No.7, 2011
• Ali Khorram, Majid Ghoreishi, Mohammad Reza Soleymani Yazdi, Mahmood Moradi
• Citations: 34 (Details)

• Kinetics of Manganese Oxides Dissolution in Sulphuric Acid Solutions Containing Oxalic Acid, Engineering, Vol.5 No.9, 2013
• I. V. Artamonova, I. G. Gorichev, E. B. Godunov
• Citations: 34 (Details)

• Numerical Study of a Confined Axisymmetric Jet Impingement Heat Transfer with Nanofluids, Engineering, Vol.5 No.1B, 2013
• Jun-Bo Huang, Jiin-Yuh Jang
• Citations: 33 (Details)

• Electrochemical Deposition and Optimization of Thermoelectric Nanostructured Bismuth Telluride Thick Films, Engineering, Vol.3 No.6, 2011
• Hesham M. A. Soliman, Abdel-Hady B. Kashyout
• Citations: 33 (Details)

• An Adaptive Differential Evolution Algorithm to Solve Constrained Optimization Problems in Engineering Design, Engineering, Vol.2 No.1, 2010
• Y.Y. AO, H.Q. CHI
• Citations: 33 (Details)

• Modelling and Optimisation of a Spring-Supported Diaphragm Capacitive MEMS Microphone, Engineering, Vol.2 No.10, 2010
• Norizan Mohamad, Pio Iovenitti, Thurai Vinay
• Citations: 33 (Details)

• Present Status of Solid Waste Management at Babylon Governorate, Iraq, Engineering, Vol.7 No.7, 2015
• Ali Chabuk, Nadhir Al-Ansari, Hussain Musa Hussain, Sven Knutsson, Roland Pusch
• Citations: 33 (Details)

• The Evolution of Reliability and Efficiency of Aerospace Bearing Systems, Engineering, Vol.9 No.11, 2017
• Peter Gloeckner, Charles Rodway
• Citations: 32 (Details)

• Experimental Investigation and Development of Artificial Neural Network Model for the Properties of Locally Produced Light Weight Aggregate Concrete, Engineering, Vol.2 No.6, 2010
• Mostafa A. M. Abdeen, Hossam Hodhod
• Citations: 32 (Details)

• Energy Analysis of Pid Controlled Heat Pump Dryer, Engineering, Vol.1 No.3, 2009
• Ilhan CEYLAN
• Citations: 32 (Details)

• Gas Turbine Performance Optimization Using Compressor Online Water Washing Technique, Engineering, Vol.3 No.5, 2011
• Ezenwa A. Ogbonnaya
• Citations: 32 (Details)

• Stress Function of a Rotating Variable-Thickness Annular Disk Using Exact and Numerical Methods, Engineering, Vol.3 No.4, 2011
• Ashraf M. Zenkour, Daoud S. Mashat
• Citations: 32 (Details)

• Safety Management in a Manufacturing Company: Six Sigma Approach, Engineering, Vol.4 No.7, 2012
• Lateef Ur Rehman Ateekh-ur-Rehman
• Citations: 32 (Details)

• Measurements of the Electrical Incidence Angle Modifiers of an Asymmetrical Photovoltaic/Thermal Compound Parabolic Concentrating-Collector, Engineering, Vol.5 No.1B, 2013
• Bernardo Ricardo, Davidsson Henrik, Gentile Niko, Gomes João, Gruffman Christian, Chea Luis, Mumba Chabu, Karlsson Björn
• Citations: 32 (Details)

• Preparation of Water Soluble Yeast Glucan by Four Kinds of Solubilizing Processes, Engineering, Vol.4 No.10B, 2012
• Liping Du, Xuekuang Zhang, Chao Wang, Dongguang Xiao
• Citations: 31 (Details)

• Equilibrium Study for Reactive Extraction of Caproic Acid in Mibk and Xylene, Engineering, Vol.3 No.8, 2011
• Kailas L. Wasewar, Diwakar Z. Shende
• Citations: 31 (Details)

• A Finite Element Study of Elastic-Plastic Hemispherical Contact Behavior against a Rigid Flat under Varying Modulus of Elasticity and Sphere Radius, Engineering, Vol.2 No.4, 2010
• Prasanta Sahoo, Biplab Chatterjee
• Citations: 31 (Details)

• Applications of High-Efficiency Abrasive Process with CBN Grinding Wheel, Engineering, Vol.2 No.3, 2010
• Yali Hou, Changhe Li, Yan Zhou
• Citations: 31 (Details)

• Assessment of Climate Change Impacts on Water Resources of Al-Adhaim, Iraq Using SWAT Model, Engineering, Vol.8 No.10, 2016
• Nahlah Abbasa, Saleh A. Wasimia, Nadhir Al-Ansari
• Citations: 31 (Details)

• The Effects of Shade Tree Types on Light Variation and Robusta Coffee Production in Vietnam, Engineering, Vol.7 No.11, 2015
• Nguyen Van Long, Nguyen Quang Ngoc, Nguyen Ngoc Dung, Paul Kristiansen, Isa Yunusa, Chris Fyfe
• Citations: 31 (Details)

• Evaluation of the Shear Strength of Perfobond Rib Connectors in Ultra High Performance Concrete, Engineering, Vol.6 No.13, 2014
• Jae Yoon Kang, Jong Sup Park, Woo Tai Jung, Moon Seoung Keum
• Citations: 31 (Details)

• Finite Element Modelling of Steel Beams with Web Openings, Engineering, Vol.6 No.13, 2014
• Flavio Rodrigues, Pedro C. G. da S. Vellasco, Luciano R. O. de Lima, Sebastião A. L. de Andrade
• Citations: 30 (Details)

• Experimental Study on the Mechanical Properties of FRP Bars by Hybridizing with Steel Wires, Engineering, Vol.6 No.7, 2014
• Ji-Hyun Hwang, Dong-Woo Seo, Ki-Tae Park, Young-Jun You
• Citations: 30 (Details)

• Assessment of Climate Change Impact on Water Resources of Lesser Zab, Kurdistan, Iraq Using SWAT Model, Engineering, Vol.8 No.10, 2016
• Nahlah Abbasa, Saleh A. Wasimia, Nadhir Al-Ansari
• Citations: 30 (Details)

• Analysis of Health Workers’ Perceptions on Medical Waste Management in Tanzanian Hospitals, Engineering, Vol.8 No.7, 2016
• Ignasio S. Kagonji, Samwel V. Manyele
• Citations: 30 (Details)

• Using MATLAB to Design and Analyse Composite Lami-nates, Engineering, Vol.2 No.11, 2010
• A. Ramsaroop, K. Kanny
• Citations: 30 (Details)

• Time Dependent Pressure Gradient Effect on Unsteady MHD Couette Flow and Heat Transfer of a Casson Fluid, Engineering, Vol.3 No.1, 2011
• M. E. Sayed-Ahmed, Hazem A. Attia, Karem M. Ewis
• Citations: 30 (Details)

• A Talc-Based Cement-Poor Concrete for Sealing Boreholes in Rock, Engineering, Vol.5 No.3, 2013
• Roland Pusch, Laurence Warr, Georg Grathoff, Alireza Pourbakhtiar, Sven Knutsson, Mohammed Hatem Mohammed
• Citations: 30 (Details)

• Design and Kinematics Analysis of a Parallel Mechanism to be Utilized as a Luggage Door by an Analogy to a Four – Bar Mechanism, Engineering, Vol.3 No.4, 2011
• Burak Baykus, Elmas Anli, Ibrahim Ozkol
• Citations: 29 (Details)

• Boundary Layer Flow of an Unsteady Dusty Fluid and Heat Transfer Over a Stretching Sheet with Non-Uniform Heat Source/Sink, Engineering, Vol.3 No.7, 2011
• Bijjanal J. Gireesha, Govinakovi S. Roopa, Channabasappa S. Bagewadi
• Citations: 29 (Details)

• Study on Performance and Emission Characteristics of a Compression Ignition Engine Fueled with Diesel-2 Ethoxy Ethyl Acetate Blends, Engineering, Vol.3 No.11, 2011
• B. Deepanraj, P. Lawrence, M. Kannan, V. Nadanakumar, S. Santhanakrishnan, R. Senthil
• Citations: 29 (Details)

• A Review on Stabilization of Expansive Soil Using Industrial Solid Wastes, Engineering, Vol.9 No.12, 2017
• R. Thirumalai, S. Suresh Babu, V. Naveennayak, R. Nirmal, G. Lokesh
• Citations: 29 (Details)

• Investigation of the Properties of Fibrous Cotton Seeds, for Sorting on a Mesh Surface, Engineering, Vol.10 No.9, 2018
• Avazbek Obidov, Khamid Akhmedhodjaev, Olimjon Sarimsakov, Qurbonali Holikov
• Citations: 29 (Details)

• An Experimental Study on the Behavior of Shear Keys According to the Curing Time of UHPC, Engineering, Vol.7 No.4, 2015
• Hee Seok Kim, Won Jong Chin, Jeong Rae Cho, Young Jin Kim, Hyejin Yoon
• Citations: 29 (Details)

• Remote Laser Welding with High Power Fiber Lasers, Engineering, Vol.5 No.9, 2013
• Paul Kah, Jinhong Lu, Jukka Martikainen, Raimo Suoranta
• Citations: 29 (Details)

• An Experimental Study on the Effect of Foundation Depth, Size and Shape on Subgrade Reaction of Cohessionless Soil, Engineering, Vol.5 No.10, 2013
• Wael N. Abd Elsamee
• Citations: 29 (Details)

• The Implementation of Waste Sawdust in Concrete, Engineering, Vol.5 No.12, 2013
• Yong Cheng, Wen You, Chaoyong Zhang, Huanhuan Li, Jian Hu
• Citations: 29 (Details)

• Numeric Solution of the Fokker-Planck-Kolmogorov Equation, Engineering, Vol.5 No.12, 2013
• Claudio Floris
• Citations: 29 (Details)

• Water Demand Management in Jordan, Engineering, Vol.6 No.1, 2014
• Nadhir Al-Ansari, N. Alibrahiem, M. Alsaman, Sven Knutsson
• Citations: 29 (Details)

• Application of Finite Elements Method for Structural Analysis in a Coffee Harvester, Engineering, Vol.6 No.3, 2014
• Evandro Pereira da Silva, Fábio Moreira da Silva, Ricardo Rodrigues Magalhães
• Citations: 29 (Details)

• The Experiment and Simulation of Solid Desiccant Dehumidification for Air-Conditioning System in a Tropical Humid Climate, Engineering, Vol.5 No.1A, 2013
• Juntakan Taweekun, Visit Akvanich
• Citations: 28 (Details)

• Human Brain Microwave Imaging Signal Processing: Frequency Domain (S-parameters) to Time Domain Conversion, Engineering, Vol.5 No.5B, 2013
• Kim Mey Chew, Rubita Sudirman, Nasrul Humaimi Mahmood, Norhudah Seman, Ching Yee Yong
• Citations: 28 (Details)

• Multi-Objective Optimization Using Genetic Algorithms of Multi-Pass Turning Process, Engineering, Vol.5 No.7, 2013
• Abdelouahhab Jabri, Abdellah El Barkany, Ahmed El Khalfi
• Citations: 28 (Details)

• Coordinated Voltage Control in Distribution Network with Renewable Energy based Distributed Generation, Engineering, Vol.5 No.1B, 2013
• Mohd Khairun Nizam Mohd Sarmin, Worawat Nakawiro, MohdZamriChe Wanik, Mohd FadzilMohd Siam, ZahrulFaizi Hussien, Ahmad Asrul Ibrahim, Ahmad Kamil Mat Hussin
• Citations: 28 (Details)

• Figure of Merit Analysis of a Hybrid Solar-geothermal Power Plant, Engineering, Vol.5 No.1B, 2013
• Cheng Zhou, Elham Doroodchi, Behdad Moghtaderi
• Citations: 28 (Details)

• Copper Release Kinetics and Ageing of Insulation Paper in Oil-Immersed Transformers, Engineering, Vol.7 No.8, 2015
• Olena Sevastyanova, Bogdan Pasalskiy, Boris Zhmud
• Citations: 27 (Details)

• Peridynamic Solutions for Timoshenko Beams, Engineering, Vol.6 No.6, 2014
• E. Thomas Moyer, Michael J. Miraglia
• Citations: 27 (Details)

• Al-Mseiab Qadaa Landfill Site Selection Using GIS and Multicriteria Decision Analysis, Engineering, Vol.6 No.9, 2014
• Mohammad Ali Alanbari, Nadhir Al-Ansari, Hadeel Kareem Jasim, Sven Knutsson
• Citations: 26 (Details)

• Al-Batin Alluvial Fan, Southern Iraq, Engineering, Vol.6 No.11, 2014
• Varoujan K. Sissakian, Ahmad T. Shihab, Nadhir Al-Ansari, Sven Knutsson
• Citations: 26 (Details)

• Torsional Behavior Design of UHPC Box Beams Based on Thin-Walled Tube Theory, Engineering, Vol.7 No.3, 2015
• Imjong Kwahk, Changbin Joh, Jung Woo Lee
• Citations: 26 (Details)

• Strip Thickness Control of Cold Rolling Mill with Roll Eccentricity Compensation by Using Fuzzy Neural Network, Engineering, Vol.6 No.1, 2014
• Waleed I. Hameed, Khearia A. Mohamad
• Citations: 26 (Details)

• Noninvasive Blood Glucose Monitoring System Based on Distributed Multi-Sensors Information Fusion of Multi-Wavelength NIR, Engineering, Vol.5 No.10B, 2013
• Bo Zeng, Wei Wang, Na Wang, Funing Li, Fulong Zhai, Lintao Hu
• Citations: 26 (Details)

• A Novel Hybrid Approach to Estimate Customer Interruption Costs for Industry Sectors, Engineering, Vol.5 No.10A, 2013
• Sinan Kufeoglu, Matti Lehtonen
• Citations: 26 (Details)

• A New Model for the Etching Characteristics of Corners Formed by Si_{111} Planes on Si_{110} Wafer Surface, Engineering, Vol.5 No.11A, 2013
• Prem Pal, Sajal Sagar Singh
• Citations: 26 (Details)

• Estimation of Domestic Solid Waste Amount and Its Required Landfill Volume in Najaf Governorate, Iraq for the Period 2015-2035, Engineering, Vol.8 No.6, 2016
• Mohammad A. Al-Anbari, Mohanad Y. Thameer, Nadhir Al-Ansari, Sven Knutsson
• Citations: 26 (Details)

• Energy Saving Potential Due to Refurbishment of Federal Public Housing in the UAE, Engineering, Vol.5 No.1B, 2013
• Wafa AlAwadhi, Athari AlNaqbi, Abeer Manneh, Ayoub Kazim, Bassam Abu-Hijleh
• Citations: 26 (Details)

• Handwriting Classification Based on Support Vector Machine with Cross Validation, Engineering, Vol.5 No.5B, 2013
• Anith Adibah Hasseim, Rubita Sudirman, Puspa Inayat Khalid
• Citations: 26 (Details)

• Pitfalls and Remedies in DEA Applications: How to Handle an Occurrence of Zero in Multipliers by Strong Complementary Slackness Conditions, Engineering, Vol.5 No.5A, 2013
• Toshiyuki Sueyoshi, Mika Goto
• Citations: 26 (Details)

• Building Failure Causes in Nigeria and Mitigating Roles by Engineering Regulation and Monitoring, Engineering, Vol.5 No.2, 2013
• Joseph Apagu Tanko, Felix Aromo Ilesanmi, Sunday Kilkabu Balla
• Citations: 25 (Details)

• Effect of the Weaving Density of Aramid Fabrics on Their Resistance to Ballistic Impacts, Engineering, Vol.4 No.12A, 2012
• Jung Seop Lim, Bum Hoon Lee, Chang Bae Lee, In-Sik Han
• Citations: 25 (Details)

• Field of Stresses in an Isotropic Plane with Circular Inclusion under Tensile Stress, Engineering, Vol.4 No.9, 2012
• Deryugin Ye Yevgeny, G. V. Lasko
• Citations: 25 (Details)

• Rock Breakage Using Expansive Cement, Engineering, Vol.3 No.2, 2011
• Amr El Dessouki, Hani Mitri
• Citations: 25 (Details)

• Luminescent Properties of Europium Complexes with Different Long Chains in Langmuir-Blodgett (LB) Films, Engineering, Vol.3 No.4, 2011
• Tiesheng Li, Wei Shang, Fuli Zhang, Luyuan Mao, Caiqin Tang, Maoping Song, Chenxia Du, Yangjie Wu
• Citations: 25 (Details)

• Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid, Engineering, Vol.2 No.10, 2010
• K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy
• Citations: 25 (Details)

• Determination of the Response Amplitude Operator(s) of an FPSO, Engineering, Vol.11 No.9, 2019
• Imabibo Ibinabo, Daniel T. Tamunodukobipi
• Citations: 25 (Details)

• Review of Climate Change Impacts on Human Environment: Past, Present and Future Projections, Engineering, Vol.13 No.11, 2021
• Nasrat Adamo, Nadhir Al-Ansari, Varoujan Sissakian
• Citations: 24 (Details)

• Effect of Preheating Temperature on the Mechanical and Fracture Properties of Welded Pearlitic Rail Steels, Engineering, Vol.5 No.11, 2013
• Heshmat A. Aglan, Sudan Ahmed, Kaushal R. Prayakarao, Mahmood Fateh
• Citations: 24 (Details)

• Design of a Noninvasive Bladder Urinary Volume Monitoring System Based on Bio-Impedance, Engineering, Vol.5 No.10B, 2013
• Rihui Li, Jinwu Gao, Hongbin Wang, Qing Jiang
• Citations: 24 (Details)

• Karstification Effect on the Stability of Mosul Dam and Its Assessment, North Iraq, Engineering, Vol.6 No.2, 2014
• Varoujan K. Sissakian, Nadhir Al-Ansari, Sven Knutsson
• Citations: 24 (Details)

• Mathematical Model for the Injector of a Common Rail Fuel-Injection System, Engineering, Vol.7 No.6, 2015
• Simon Marčič, Milan Marčič, Zdravko Praunseis
• Citations: 24 (Details)

• The Efficiency Analysis of the Exhaust Air Heat Pump System, Engineering, Vol.6 No.13, 2014
• Alo Mikola, Teet-Andrus Kõiv
• Citations: 24 (Details)

• Evaluation of Fatigue Life of Semiconductor Power Device by Power Cycle Test and Thermal Cycle Test Using Finite Element Analysis, Engineering, Vol.2 No.12, 2010
• Kazunori Shinohara, Qiang Yu
• Citations: 24 (Details)

• Utilization of Local Available Materials to Stabilize Native Soil (Earth Roads) in Tanzania—Case Study Ngara, Engineering, Vol.2 No.7, 2010
• Fikiri Fredrick Magafu, Wu Li
• Citations: 24 (Details)

• Performance Assessment of Installed Solar PV System: A Case Study of Oke-Agunla in Nigeria, Engineering, Vol.4 No.8, 2012
• Olawale Saheed Ismail, Olusegun Olufemi Ajide, Fredrick Akingbesote
• Citations: 24 (Details)

• Predicting Soil Corrosivity along a Pipeline Route in the Niger Delta Basin Using Geoelectrical Method: Implications for Corrosion Control, Engineering, Vol.5 No.3, 2013
• Kenneth S. Okiongbo, Godwin Ogobiri
• Citations: 24 (Details)

• Red Blood Cell Mechanical Stability, Engineering, Vol.4 No.10B, 2012
• Oguz K. Baskurt
• Citations: 24 (Details)

• Assessment of the Energy Impact of Using Building Integrated Photovoltaic and Electrochromic Glazing in Office Building in UAE, Engineering, Vol.5 No.1B, 2013
• Mohammad Katanbafnasab, Bassam Abu-Hijleh
• Citations: 24 (Details)

• O-Alkylation of Chitosan for Gene Delivery by Using Ionic Liquid in an in- situ Reactor, Engineering, Vol.4 No.10B, 2012
• Huiying Chen, Shaohui Cui, Yinan Zhao, Bing Wang, Shubiao Zhang, Huiying Chen, Xiaojun Peng
• Citations: 23 (Details)

• I-Pre-Cauchy Double Sequences and Orlicz Functions, Engineering, Vol.5 No.5A, 2013
• Vakeel A. Khan, Nazneen Khan, Ayhan Esi, Sabiha Tabassum
• Citations: 23 (Details)

• Dynamic Characteristics Evaluation of Innovative UHPC Pedestrian Cable Stayed Bridge, Engineering, Vol.4 No.12, 2012
• Won Jong Chin, Young Jin Kim, Jeong-Rae Cho, Jong Sup Park
• Citations: 23 (Details)

• Analysis of Medical Waste Incinerator Performance Based on Fuel Consumption and Cycle Times, Engineering, Vol.4 No.10, 2012
• Samwel Victor Manyele, Ignatio Simon Kagonji
• Citations: 23 (Details)

• Probabilistic Simulation Approach to Evaluate the Tooth-Root Strength of Spur Gears with FEM-Based Verification, Engineering, Vol.3 No.12, 2011
• EL-Sayed S. Aziz, Constantin Chassapis
• Citations: 23 (Details)

• Design and Development of a House-Mobile Security System, Engineering, Vol.3 No.12, 2011
• Ashraf Elfasakhany, Jorge Hernández, Juan Carlos García, Mario Reyes, Francisco Martell
• Citations: 23 (Details)

• Design of Fuzzy PD-Controlled Overhead Crane System with Anti-Swing Compensation, Engineering, Vol.3 No.7, 2011
• Shebel Asad, Maazouz Salahat, Mohammed Abu Zalata, Mohammad Alia, Ayman Al Rawashdeh
• Citations: 23 (Details)

• Semantic Similarity over Gene Ontology for Multi-Label Protein Subcellular Localization, Engineering, Vol.5 No.10B, 2013
• Shibiao Wan, Man-Wai Mak, Sun-Yuan Kung
• Citations: 23 (Details)

• In-Plane Elastic Stability of Arches under a Radial Concentrated Load, Engineering, Vol.6 No.9, 2014
• Yongjun Xu, Xiaoming Gui, Bin Zhao, Ruiqi Zhou
• Citations: 22 (Details)

• Enzyme Biosensor for Detection of Organophosphate Pesticide Residues Base on Screen Printed Carbon Electrode (SPCE)-Bovine Serum Albumin (BSA), Engineering, Vol.6 No.5, 2014
• Ani Mulyasuryani, Mochammad Dofir
• Citations: 22 (Details)

• Study of the Effect of Changes on the Technological and Physical-Mechanical Properties of Knitting in a New Structure, Engineering, Vol.13 No.6, 2021
• Shahboz Shokirjonugli Shogofurov, Iroda Ibrohimovna Kamalova, Kurbonali Madaminovich Xolikov
• Citations: 22 (Details)

• Landfill Site Selection Using GIS and Multi-Criteria Decision-Making AHP and SAW Methods: A Case Study in Sulaimaniyah Governorate, Iraq, Engineering, Vol.12 No.4, 2020
• Karwan Alkaradaghi, Salahalddin S. Ali, Nadhir Al-Ansari, Jan Laue
• Citations: 22 (Details)

• Dynamics of Interaction of a Single Fiber with a Headset of a Sampling Drum, Engineering, Vol.12 No.6, 2020
• Yuldashev Jamshid, Umarov Akbarjon, Sarimsakov Olimjon
• Citations: 22 (Details)

• Process Capability Analysis of a Centre Lathe Turning Process, Engineering, Vol.8 No.3, 2016
• Andrew A. Erameh, Nurudeen A. Raji, Rasheed O. Durojaye, Abiodun A. Yussouff
• Citations: 22 (Details)

• Groundwater Vulnerability Using DRASTIC and COP Models: Case Study of Halabja Saidsadiq Basin, Iraq, Engineering, Vol.8 No.11, 2016
• Twana O. Abdullah, Salahalddin S. Ali, Nadhir A. Al-Ansari, Sven Knutsson
• Citations: 22 (Details)

• Dukan Dam Reservoir Bed Sediment, Kurdistan Region, Iraq, Engineering, Vol.8 No.9, 2016
• Rebwar Hassan, Nadhir Al-Ansari, Salahalddin S. Ali, Ammar A. Ali, Twana Abdullah, Sven Knutsson
• Citations: 22 (Details)

• The Theoretical Studies of the Cultivation of Three Cotton Seeds along the Plain, Engineering, Vol.10 No.8, 2018
• Obidov Avazbek, Sultonov Mirzaolim, Muhksinov Ibrohim, Abdullaev Shokir
• Citations: 22 (Details)

• Bearing Capacity Map for An-Najaf and Kufa Cities Using GIS, Engineering, Vol.10 No.5, 2018
• Laheab A. Jasem Al-Maliki, Sohaib Kareem Al-Mamoori, Khaled El-Tawel, Hussain M. Hussain, Nadhir Al-Ansari, Mohammed Jawad Al Ali
• Citations: 22 (Details)

• A Prediction Method for In-Plane Permeability and Manufacturing Applications in the VARTM Process, Engineering, Vol.3 No.7, 2011
• Ya-Jung Lee, Yu-Ti Jhan, Cheng-Hsien Chung, Yao Hsu
• Citations: 22 (Details)

• Classical and Fractional-Order Analysis of the Free and Forced Double Pendulum, Engineering, Vol.2 No.12, 2010
• Elmas Anli, Ibrahim Ozkol
• Citations: 22 (Details)

• Parameter Estimation of Single Phase Core Type Transformer Using Bacterial Foraging Algorithm, Engineering, Vol.2 No.11, 2010
• Seeni Padma, Srikrishna Subramanian
• Citations: 22 (Details)

• Evaluation of the Ultimate Capacity of Friction Piles, Engineering, Vol.4 No.11, 2012
• Wael N. Abd Elsamee
• Citations: 22 (Details)

• Isolation and Identification of Ammonia Nitrogen Degradation Strains from Industrial Wastewater, Engineering, Vol.4 No.11, 2012
• Cai-Hong Yu, Ya Wang, Tao Guo, Wan-Xin Shen, Ming-Xin Gu
• Citations: 22 (Details)

• Design of Equal Precision Frequency Meter Based on FPGA, Engineering, Vol.4 No.10, 2012
• Yi-yuan Fang, Xue-jun Chen
• Citations: 22 (Details)

• On Some I-Convergent Double Sequence Spaces Defined by a Modulus Function, Engineering, Vol.5 No.5A, 2013
• Vakeel. A. Khan, Nazneen Khan
• Citations: 22 (Details)

• Effect of Surface Texturing on Lubricating Condition under Point Contact Using Numerical Analysis, Engineering, Vol.5 No.4, 2013
• Yuji Ohue, Hideki Tanaka
• Citations: 21 (Details)

• The Mechanism of Lipofectamine 2000 Mediated Transmembrane Gene Delivery, Engineering, Vol.4 No.10B, 2012
• Shaohui Cui, Shubiao Zhang, Huiying Chen, Bing Wang, Yinan Zhao, Defu Zhi
• Citations: 21 (Details)

• Dual Solution of MHD Stagnation-Point Flow towards a Stretching Surface, Engineering, Vol.2 No.4, 2010
• Tapas R. Mahapatra, Samir K. Nandy, Anadi S. Gupta
• Citations: 21 (Details)

• Enhancement of Available Transfer Capability with Facts Device in the Competitive Power Market, Engineering, Vol.2 No.5, 2010
• Bairavan V. Manikandan, Sathiasamuel C. Raja, Paramasivam Venkatesh
• Citations: 21 (Details)

• Optimum Load Shedding in Power System Strategies with Voltage Stability Indicators, Engineering, Vol.2 No.1, 2010
• P.V. RAJ, M. SUDHAKARAN
• Citations: 21 (Details)

• Improvement of Used Transformer Oils with Activated Bentonite, Engineering, Vol.3 No.6, 2011
• Loai Nasrat, Mohamed Abdelwahab, Gamal Ismail
• Citations: 21 (Details)

• Influence of Structural Aspects on the Generation Process in Planetary Gear Trains, Engineering, Vol.3 No.10, 2011
• I. Rajasri, AVSSKS Gupta, YVD Rao
• Citations: 21 (Details)

• Formation of X-120 M Line Pipe through J-C-O-E Technique, Engineering, Vol.3 No.4, 2011
• Jai Dev Chandel, Nand Lal Singh
• Citations: 21 (Details)

• Transient Stability Analysis of Power System by Coordinated PSS-AVR Design Based on PSO Technique, Engineering, Vol.3 No.5, 2011
• A. D. Falehi, M. Rostami, Hassan Mehrjadi
• Citations: 21 (Details)

• Reactivity of Fine Quartz in Presence of Silica Fume and Slag, Engineering, Vol.3 No.6, 2011
• Karima Arroudj, Abdelfetah Zenati, Mohamed Nadjib Oudjit, Abderrahim Bali, Arezki Tagnit-Hamou
• Citations: 21 (Details)

• Production and Characterization of Zr Based Bulk Metallic Glass Matrix Composites (BMGMC) in the Form of Wedge Shape Ingots, Engineering, Vol.10 No.4, 2018
• Muhammad Musaddique Ali Rafique
• Citations: 21 (Details)

• Is Mosul Dam the Most Dangerous Dam in the World? Review of Previous Work and Possible Solutions, Engineering, Vol.9 No.10, 2017
• Nadhir Al-Ansari, Nasrat Adamo, Varoujan Sissakian, Sven Knutsson, Jan Laue
• Citations: 21 (Details)

• Improving the Reliability of a Domestic Refrigerator Compressor Subjected to Repetitive Loading, Engineering, Vol.8 No.3, 2016
• Seong-Woo Woo, Dennis L. O’Neal
• Citations: 21 (Details)

• Load Flow Analysis Framework for Active Distribution Networks Based on Smart Meter Reading System, Engineering, Vol.5 No.10A, 2013
• Merkebu Zenebe Degefa, Robert John Millar, Matti Koivisto, Muhammad Humayun, Matti Lehtonen
• Citations: 21 (Details)

• Inquiry of Water-Soluble Polysaccharide Extraction Conditions from Grapefruit Skin, Engineering, Vol.3 No.11, 2011
• Ziping Luo, Zilin Liu, Shiyu Tan, Qiliang Xu, Haiyan Yang, Lingli Yang
• Citations: 20 (Details)

• Application of Geostatistical Models for Estimating Spatial Variability of Rock Depth, Engineering, Vol.3 No.9, 2011
• Pijush Samui, Thallak G. Sitharam
• Citations: 20 (Details)

• Using Microgripper in Development of Automatic Adhesive Glue Transferring and Binding Microassembly System, Engineering, Vol.2 No.1, 2010
• R. J. CHANG, C. C. CHEN
• Citations: 20 (Details)

• Structure and Properties of Sn-9Zn Lead-Free Solder Alloy with Heat Treatment, Engineering, Vol.2 No.3, 2010
• Mahmoud Hammam, Fardos Saad Allah, El Said Gouda, Yaser El Gendy, Heba Abdel Aziz
• Citations: 20 (Details)

• The Effects of an Applied Voltage on the Corrosion Characteristics of Dense MgO, Engineering, Vol.2 No.7, 2010
• Brian Joseph Monaghan, Sharon April Nightingale, Qiang Dong, Michael Funcik
• Citations: 20 (Details)

• Influence of Swimming Pool Design on Hydraulic Behavior: A Numerical and Experimental Study, Engineering, Vol.5 No.5, 2013
• Anaëlle Cloteaux, Fabien Gérardin, Noël Midoux
• Citations: 20 (Details)

• Photocatalytic Degradation of 2,6-Dichlorophenol in Aqueous Phase Using Titania as a Photocatalyst, Engineering, Vol.4 No.8, 2012
• Sushil Kumar Kansal, Mani Chopra
• Citations: 20 (Details)

• Modelling and Parameters Identification of Through-Hole Type Wind Turbine Contactless Sliprings, Engineering, Vol.4 No.5, 2012
• Ali Abdolkhani, Aiguo Patrick Hu, Nirmal C.-K. Nair
• Citations: 20 (Details)

• Three-Level Control of a Distillation Column, Engineering, Vol.4 No.10, 2012
• László Szabó, Sándor Németh, Ferenc Szeifert
• Citations: 19 (Details)

• Application of Heterogenous Catalysis with TiO2 Photo Irradiated by Sunlight and Latter Activated Sludge System for the Reduction of Vinasse Organic Load, Engineering, Vol.4 No.11, 2012
• Juliana Sanches Carrocci, Rodrigo Yuji Mori, Oswaldo Luiz Cobra Guimarães, Rodrigo Fernando dos Santos Salazar, Marcos Fernandes de Oliveira, André Luís de Castro Peixoto, Helcio José Izário Filho
• Citations: 19 (Details)

• The Analysis of the Influence and Inspiration of the Bauhaus on Contemporary Design and Education, Engineering, Vol.5 No.4, 2013
• Wenwen Chen, Zhuozuo He
• Citations: 19 (Details)

• Effect of Zinc Galvanization on the Microstructure and Fracture Behavior of Low and Medium Carbon Structural Steels, Engineering, Vol.5 No.8, 2013
• Ignatius C. Okafor, Ronald J. O’Malley, Kaushal R. Prayakarao, Heshmat A. Aglan
• Citations: 19 (Details)

• Electronic Detection of Escherichia coli O157︰H7 Using Single-Walled Carbon Nanotubes Field-Effect Transistor Biosensor, Engineering, Vol.4 No.10B, 2012
• Xiaoxian Zhang, Dongwei Wang, Danna Yang, Sai Li, Zhiqiang Shen
• Citations: 19 (Details)

• Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling, Engineering, Vol.2 No.10, 2010
• Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra
• Citations: 19 (Details)

• Some Aspects of Non-Orthogonal Stagnation-Point Flow towards a Stretching Surface, Engineering, Vol.2 No.9, 2010
• Motahar Reza, Anadi Sankar Gupta
• Citations: 19 (Details)

• Applications of Data Mining Theory in Electrical Engineering, Engineering, Vol.1 No.3, 2009
• Yagang ZHANG, Jing MA, Jinfang ZHANG, Zengping WANG
• Citations: 19 (Details)

• Detection and Quantification of Structural Damage of a Beam-Like Structure Using Natural Frequencies, Engineering, Vol.1 No.3, 2009
• Saptarshi SASMAL, K. RAMANJANEYULU
• Citations: 19 (Details)

• Evaluation of the Performance of Infrared Thermography for On-Line Condition Monitoring of Rotating Machines, Engineering, Vol.3 No.10, 2011
• Vincent Leemans, Marie-France Destain, Bovic Kilundu, Pierre Dehombreux
• Citations: 19 (Details)

• Stability Enhancement in HVDC System with STATCOM, Engineering, Vol.3 No.11, 2011
• Sung-Doo Lee, Chan-Ki Kim, Jin-Young Kim, Eung-Bo Sim
• Citations: 19 (Details)

• Sedimentation Processes and Useful Life of Mosul Dam Reservoir, Iraq, Engineering, Vol.5 No.10, 2013
• Issa E. Issa, Nadhir Al-Ansari, Govand Sherwany, Sven Knutsson
• Citations: 19 (Details)

• Characterization of Pathologic Cries of Newborns Based on Fundamental Frequency Estimation, Engineering, Vol.5 No.10B, 2013
• Yasmina Kheddache, Chakib Tadj
• Citations: 19 (Details)

• Determination of Eight Sudan Dyes in Chili Powder by UPLC-MS/MS, Engineering, Vol.5 No.10B, 2013
• Lin Wang, Jie Zheng, Zhe Zhang, Tiesong Wang, Baoquan Che
• Citations: 19 (Details)

• The Calculation of the Effective Tensor Coefficient of the Medium for the Objects with Microinclusions, Engineering, Vol.6 No.3, 2014
• Ella P. Shurina, Mikhail I. Epov, Nadejda V. Shtabel, Ekaterina I. Mikhaylova
• Citations: 19 (Details)

• The Effect of the Industrial Activities on Air Pollution at Baiji and Its Surrounding Areas, Iraq, Engineering, Vol.8 No.1, 2016
• Salwan S. Al-Hasnawi, Hussain M. Hussain, Nadhir Al-Ansari, Sven K nutsson
• Citations: 19 (Details)

• Thermal Behavior of Externally Driven Spindle: Experimental Study and Modelling, Engineering, Vol.7 No.2, 2015
• Christian Brecher, Yair Shneor, Stephan Neus, Kolja Bakarinow, Marcel Fey
• Citations: 19 (Details)

• Experimental Study and Thermodynamic Analysis of High Temperature Interactions between Boron Carbide and Liquid Metals, Engineering, Vol.6 No.13, 2014
• Michael Aizenshtein, Natalya Froumin, Nachum Frage
• Citations: 19 (Details)

• Investigation of Excavator Performance Factors in an Open-Pit Mine Using Loading Cycle Time, Engineering, Vol.9 No.7, 2017
• Samwel Victor Manyele
• Citations: 19 (Details)

• Fault Prediction of Elevator Door System Based on PSO-BP Neural Network, Engineering, Vol.8 No.11, 2016
• Penggao Wen, Meng Zhi, Guangyao Zhang, Shengmao Li
• Citations: 19 (Details)

• Landfill Sites Selection Using Analytical Hierarchy Process and Ratio Scale Weighting: Case Study of Al-Mahawil, Babylon, Iraq, Engineering, Vol.9 No.2, 2017
• Ali Jalil Chabuk, Nadhir Al-Ansari, Hussain Musa Hussain, Sven Knutsson, Roland Pusch
• Citations: 18 (Details)

• Mathematical Modeling of Heat Flux Distribution in Raw Cotton Stored in Bunt, Engineering, Vol.12 No.8, 2020
• Karimov Abdusamat Ismonovich, Ismanov Muhammadziyo
• Citations: 18 (Details)

• AC Impedance Spectroscopy of a-nc-Si:H Thin Films, Engineering, Vol.6 No.8, 2014
• Vladimir Tudić
• Citations: 18 (Details)

• Modelling Dam Break Evolution over a Wet Bed with Smoothed Particle Hydrodynamics: A Parameter Study, Engineering, Vol.7 No.5, 2015
• Patrick Jonsson, Pär Jonsén, Patrik Andreasson, T. Staffan Lundström, J. Gunnar I. Hellström
• Citations: 18 (Details)

• Experimental Study of Stacked Rectangular Microstrip Antenna for Dual-Band, Engineering, Vol.2 No.2, 2010
• R.K. Vishwakarma, S. Tiwari
• Citations: 18 (Details)

• Backlash Error Measurement and Compensation on the Vertical Machining Center, Engineering, Vol.2 No.6, 2010
• Huanlao Liu, Xiaoning Xue, Guangyu Tan
• Citations: 18 (Details)

• Development of Wearable Semi-invasive Blood Sampling Devices for Continuous Glucose Monitoring: A Survey, Engineering, Vol.5 No.5B, 2013
• Gang Wang, Martin P. Mintchev
• Citations: 18 (Details)

• Metasample-Based Robust Sparse Representation for Tumor Classification, Engineering, Vol.5 No.5B, 2013
• Bin Gan, Chun-Hou Zheng, Jin-Xing Liu
• Citations: 17 (Details)

• CFD Simulation of Scale Influence on the Hydrodynamics of an Internal Loop Airlift Reactor, Engineering, Vol.4 No.10, 2012
• Reza Davarnejad, Ehsan Bagheripoor, Abolfazl Sahraei
• Citations: 17 (Details)

• Mitigation of Human Exposure to Electromagnetic Fields Using Carbon Foam and Carbon Nanotubes, Engineering, Vol.4 No.12A, 2012
• Davide Micheli, Mario Marchetti
• Citations: 17 (Details)

• Disadvantage Pressure Changes on the Decline of Water Quality in Water Distribution Systems, Engineering, Vol.5 No.1, 2013
• Hossein Shamsaei, Othman Jaafar, Noor Ezlin Ahmad Basri
• Citations: 17 (Details)

• Entropy-Based Set Pair Analysis Model on Geological Disaster Risk for Military Engineering, Engineering, Vol.4 No.2, 2012
• Quanbing Rong, Hongjun Zhang, Fengshan Wang
• Citations: 17 (Details)

• Experimental Comparative and Numerical Predictive Stu-dies on Strength Evaluation of Cement Types: Effect of Specimen Shape and Type of Sand, Engineering, Vol.2 No.8, 2010
• Hossam Hodhod, Mostafa A. M. Abdeen
• Citations: 17 (Details)

• Development of Multi-Channel Data Logger for Indoor Environment, Engineering, Vol.2 No.9, 2010
• Anuj Kumar, Indu Prakash Singh, Suresh Kumar Sud
• Citations: 17 (Details)

• Numerical Analysis on Static Mechanical Properties of the Periodic Multilayer Lattice Material, Engineering, Vol.3 No.12, 2011
• Rui Guo, Rong-zhong Liu, Wei Jiang, Kai Chen, Jun Zhang, Feng-hua Huang, Xue-wu Sun
• Citations: 17 (Details)

• Experimental Study on Indoor Thermal Stratification in Large Space by under Floor Air Distribution System (UFAD) in Summer, Engineering, Vol.3 No.4, 2011
• Xin Wang, Chen Huang, Weiwu Cao, Xuelei Gao, Wen Liu
• Citations: 17 (Details)

• Electrowinning of Copper Using Rotating Cylinder Electrode Utilizing Lead Anode, Engineering, Vol.3 No.4, 2011
• Hesham Soliman, Ahmed Abd El-Moneim
• Citations: 17 (Details)

• Wavelet-Based Nonstationary Wind Speed Model in Dongting Lake Cable-Stayed Bridge, Engineering, Vol.2 No.11, 2010
• Xuhui He, Jun Fang, Andrew Scanlon, Zhengqing Chen
• Citations: 17 (Details)

• Fractional Order Generalized Thermoelastic Infinite Medium with Cylindrical Cavity Subjected to Harmonically Varying Heat, Engineering, Vol.3 No.1, 2011
• Hamdy M. Youssef, Eman A. Al-Lehaibi
• Citations: 17 (Details)

• A Robust Extended Kalman Filter for Speed-Sensorless Control of a Linearized and Decoupled PMSM Drive, Engineering, Vol.7 No.10, 2015
• P. Tety, A. Konate, Olivier Asseu, E. Soro, P. Yoboue, A. R. Kouadjo
• Citations: 17 (Details)

• Analysis of Biomechanical Behaviour of Anterior Teeth Using Two Different Methods: Finite Element Method and Experimental Tests, Engineering, Vol.6 No.3, 2014
• Laura M. Bessone, Enrique Fernández Bodereau, Gabriela Cabanillas, Alejandro Dominguez
• Citations: 17 (Details)

• Evaluating Pressure Ulcer Development in Wheelchair-Bound Population Using Sitting Posture Identification, Engineering, Vol.5 No.10B, 2013
• Farve Daneshvar Fard, Sahar Moghimi, Reza Lotfi
• Citations: 17 (Details)

• Combination of the Kinect with Virtual Reality in Balance Training for the Elderly, Engineering, Vol.5 No.10B, 2013
• Wei-Min Hsieh, Chih-Chen Chen, Shih-Chuan Wang, Yu-Luen Chen, Yuh-Shyan Hwang, Jin-Shin Lai
• Citations: 17 (Details)

• Tourism Traffic Demand Prediction Using Google Trends Based on EEMD-DBN, Engineering, Vol.12 No.3, 2020
• Yi Xiao, Xueting Tian, Ming Xiao
• Citations: 17 (Details)

• Health Monitoring Based on Dynamic Flexibility Matrix: Theoretical Models versus In-Situ Tests, Engineering, Vol.9 No.2, 2017
• Sebastian Schommer, Jean Mahowald, Viet Ha Nguyen, Danièle Waldmann, Stefan Maas, Arno Zürbes, Guido De Roeck
• Citations: 17 (Details)

• Assessing the Impacts of Land Use and Land Cover Changes on Hydrology of the Mbarali River Sub-Catchment. The Case of Upper Great Ruaha Sub-Basin, Tanzania, Engineering, Vol.10 No.9, 2018
• Edmund Mutayoba, Japhet J. Kashaigili, Frederick C. Kahimba, Winfred Mbungu, Nyemo A. Chilagane
• Citations: 16 (Details)

• Pb-Ca-Sn-Ba Grid Alloys for Valve-Regulated Lead Acid Batteries, Engineering, Vol.5 No.10A, 2013
• Marina M. Burashnikova, Irina V. Zotova, Ivan A. Kazarinov
• Citations: 16 (Details)

• Enabling Long-Term Operation of GaAs-Based Sensors, Engineering, Vol.5 No.9A, 2013
• Maria Tkachev, Tatikonda Anand-Kumar, Arkady Bitler, Rahamim Guliamov, Ron Naaman
• Citations: 16 (Details)

• The Implementation of the Surface Charging Effects in Three-Dimensional Simulations of SiO₂ Etching Profile Evolution, Engineering, Vol.6 No.1, 2014
• Branislav Radjenović, Marija Radmilović-Radjenović
• Citations: 16 (Details)

• Modeling of Wind Erosion of the Aitik Tailings Dam Using SWEEP Model, Engineering, Vol.6 No.7, 2014
• Qi Jia, Nadhir Al-Ansari, Sven Knutsson
• Citations: 16 (Details)

• Investigation of the Flow Pattern inside a Diesel Engine Injection Nozzle to Determine the Relationship between Various Flow Parameters and the Occurrence of Cavitation, Engineering, Vol.6 No.13, 2014
• Hagar Alm-Eldin Bastawissi, Medhat Elkelawy
• Citations: 16 (Details)

• Micro Arc Oxidation of Wire Arc Sprayed Al-Mg6, Al-Si12, Al Coatings on Low Alloyed Steel, Engineering, Vol.3 No.7, 2011
• Levent Cenk Kumruoglu, Fatih Ustel, Ahmet Ozel, Abdullah Mimaroglu
• Citations: 16 (Details)

• Generation and Propagation of Tsunami by a Moving Realistic Curvilinear Slide Shape with Variable Velocities in Linearized Shallow-Water Wave Theory, Engineering, Vol.2 No.7, 2010
• Hossam Shawky Hassan, Khaled Tawfik Ramadan, Sarwat Nageeb Hanna
• Citations: 16 (Details)

• An Improved Parameters Extraction Method for Dumbbell-Shaped Defected Ground Structure, Engineering, Vol.2 No.3, 2010
• Yuchun Guo, Qing Wang
• Citations: 16 (Details)

• The Fatigue Fracture Criterion Based on the Latent Energy Approach, Engineering, Vol.2 No.5, 2010
• Alexander R. Arutyunyan, Robert A. Arutyunyan
• Citations: 16 (Details)

• The Vibration of Partially Filled Cylindrical Tank Subjected to Variable Acceleration, Engineering, Vol.4 No.9, 2012
• Omar Badran, Mohamed S. Gaith, Ali Al-Solihat
• Citations: 16 (Details)

• An Improved Kernel K-Mean Cluster Method and Its Application in Fault Diagnosis of Roller Bearing, Engineering, Vol.5 No.1, 2013
• Ling-Li Jiang, Yu-Xiang Cao, Hua-Kui Yin, Kong-Shu Deng
• Citations: 16 (Details)

• Degradation Behaviors of Thai Bombyx mori Silk Fibroins Exposure to Protease Enzymes, Engineering, Vol.5 No.1, 2013
• Chuleerat Wongnarat, Prasong Srihanam
• Citations: 16 (Details)

• Numerical Study on an Applicable Underground Mining Method for Soft Extra-Thick Coal Seams in Thailand, Engineering, Vol.4 No.11, 2012
• Nay Zarlin, Takashi Sasaoka, Hideki Shimada, Kikuo Matsui
• Citations: 16 (Details)

• Improvement of Liver Segmentation by Combining High Order Statistical Texture Features with Anatomical Structural Features, Engineering, Vol.5 No.5B, 2013
• Suhuai Luo, Xuechen Li, Jiaming Li
• Citations: 16 (Details)

• New Method for Prediction Pile Capacity Executed by Continuous Flight Auger (CFA), Engineering, Vol.5 No.4, 2013
• Wael N. Abd Elsamee
• Citations: 16 (Details)

• "Integrated Design Process" a Concept for Green Energy Engineering, Engineering, Vol.5 No.3, 2013
• Christian Koch, Henrik Buhl
• Citations: 15 (Details)

• Electroencephalography Analysis Using Neural Network and Support Vector Machine during Sleep, Engineering, Vol.5 No.5B, 2013
• JeeEun Lee, Sun K. Yoo
• Citations: 15 (Details)

• Performance Analysis of PV Energy System in Western Region of Saudi Arabia, Engineering, Vol.5 No.1B, 2013
• Makbul Anwari, Ayong Hiendro
• Citations: 15 (Details)

• Efficacy and Safety of Nasal Administration of “Na-no-L-DOPA” Based on PLGA Nanoparticles, Engineering, Vol.4 No.10B, 2012
• I.G. Kondrasheva, T.A. Antipova, G.G. Barsegyan, P.Ye. Gambaryan, A.A. Guseva, A.A. Kamensky
• Citations: 15 (Details)

• Testing Bifacial PV Cells in Symmetric and Asymmetric Concentrating CPC Collectors, Engineering, Vol.5 No.1B, 2013
• Gomes João, Henrik Davidsson, Gruffman Christian, Maston Stefan, Karlsson Björn
• Citations: 15 (Details)

• Comparative Study between D2EHPA and Cyanex 272 as Extractants of Mn(II) from a Leached Liquor Produced by Reductive Leaching of a Pyrolusite Ore with SO₂, Engineering, Vol.4 No.9, 2012
• R. Pérez-Garibay, J. Martínez-Jiménez, A. Uribe-Salas, A. Martínez-Luévanos
• Citations: 15 (Details)

• Effect of Low Velocity Impact Damage on Buckling Properties, Engineering, Vol.1 No.3, 2009
• Ahmet YAPICI, Mehmet METIN
• Citations: 15 (Details)

• Suiting Dynamic Models of Fixed-Bed Catalytic Reactors for Computer-Based Applications, Engineering, Vol.3 No.7, 2011
• Eduardo Coselli Vasco de Toledo, Edvaldo Rodrigo Morais, Delba Nisi Cosme Melo, Adriano Pinto Mariano, João F. C. A. Meyer, Rubens Maciel Filho
• Citations: 15 (Details)

• Extended Finite Element Modeling: Basic Review and Programming, Engineering, Vol.3 No.7, 2011
• Yazid Abdelaziz, K. Bendahane, A. Baraka
• Citations: 15 (Details)

• Dynamic Stability Analysis of Periodically Time-Varying Rotor System with a Transverse Crack, Engineering, Vol.3 No.7, 2011
• Costin D. Untaroiu, Alexandrina Untaroiu, Mihail Boiangiu
• Citations: 15 (Details)

• Effect of Increasing Speed on Stress of Biaxial Bogie Frames, Engineering, Vol.3 No.3, 2011
• Mohammad Zehsaz, Farid Vakili Tahami, Ali Ziaei Asl, Fatemeh Ahmadian
• Citations: 15 (Details)

• Evaluation of Energy Consumption for Heating of Industrial Building in-Situ, Engineering, Vol.3 No.5, 2011
• Dušan Katunský, Azra Korjenic, Jana Katunská, Martin Lopušniak
• Citations: 15 (Details)

• A Maintenance Optimzation Policy for an Electric Power Distribution System: Case of the HV/MV Substations, Engineering, Vol.6 No.5, 2014
• Morad Mahmoudi, Abdellah El Barkany, Ahmed El Khalfi
• Citations: 15 (Details)

• Properties Evaluation of Concrete using Local Used Bricks as Coarse Aggregate, Engineering, Vol.6 No.5, 2014
• Riaz Bhanbhro, Irfanullah Memon, Aziz Ansari, Ahsan Shah, Bashir Ahmed Memon
• Citations: 15 (Details)

• Study on Thixotropic Properties of Waxy Crude Oil Based on Hysteresis Loop Area, Engineering, Vol.7 No.7, 2015
• Liping Guo, Yu Wang, Shuang Shi, Xiaoyang Yu, Xu Chen
• Citations: 15 (Details)

• The Comparison between Random Forest and Support Vector Machine Algorithm for Predicting β-Hairpin Motifs in Proteins, Engineering, Vol.5 No.10B, 2013
• Shaochun Jia, Xiuzhen Hu, Lixia Sun
• Citations: 15 (Details)

• Mechanism of Cuff-Less Blood Pressure Measurement Using MMSB, Engineering, Vol.5 No.10B, 2013
• Yibin Li, Yangyu Gao, Ning Deng
• Citations: 15 (Details)

• The Development of a New Type Rooftop Ventilator Turbine, Engineering, Vol.5 No.10A, 2013
• Ming Chun Hsieh, David King Jair, Huann Ming Chou
• Citations: 15 (Details)

• Performance Improvement with Combining Multiple Approaches to Diagnosis of Thyroid Cancer, Engineering, Vol.5 No.10B, 2013
• Ahmet Akbaş, Uğur Turhal, Sebahattin Babur, Cafer Avci
• Citations: 15 (Details)

• Application of GIS for Mapping Rainwater-Harvesting Potential: Case Study Wollert, Victoria, Engineering, Vol.11 No.1, 2019
• Sultana Nasrin Baby, Colin Arrowsmith, Nadhir Al-Ansari
• Citations: 15 (Details)

• Defects in Foundation Design Due to Miss-Interpretation of the Geological Data: A Case Study of Mosul Dam, Engineering, Vol.9 No.7, 2017
• Varoujan K. Sissakian, Nasrat Adamo, Nadhir Al-Ansari, Sven Knutsson, Jan Laue
• Citations: 15 (Details)

• Present Water Crises in Iraq and Its Human and Environmental Implications, Engineering, Vol.10 No.6, 2018
• Nadhir Al-Ansari, Nasrat Adamo
• Citations: 15 (Details)

• Aircraft Clean Air Requirements Using Bleed Air Systems, Engineering, Vol.10 No.4, 2018
• Susan Michaelis
• Citations: 15 (Details)

• The Study of Condensation Processes in the Low-Temperature Short Heat Pipes with a Nozzle-Shaped Vapour Channel, Engineering, Vol.9 No.2, 2017
• Arkady V. Seryakov
• Citations: 14 (Details)

• Impact of Climate Change on Water Resources of Dokan Dam Watershed, Engineering, Vol.11 No.8, 2019
• Ali Nasser Hilo, Fouad Hussein Saeed, Nadhir Al-Ansari
• Citations: 14 (Details)

• Analysis of the Relationship between the Number of Traffic Accidents and the Traffic Flow & Section Location in Extra Long Tunnel, Engineering, Vol.12 No.2, 2020
• Zhaoyou Ma, Shouen Fang, Shuo Liu, Bowen Cai
• Citations: 14 (Details)

• Real-Time Monitoring of Climactic and Geotechnical Variables during Landslides on the Slopes of Serra do Mar and Serra da Mantiqueira (São Paulo State, Brazil), Engineering, Vol.7 No.3, 2015
• Rodolfo Moreda Mendes, Mário Valério Filho
• Citations: 14 (Details)

• Cavitation Detection in Variable Speed Pump by Analyzing the Acoustic and Vibration Spectrums, Engineering, Vol.7 No.10, 2015
• Ashraf Kotb, Abdulaziz Morgan Abdulaziz
• Citations: 14 (Details)

• Field Weakening Control of a Separately Excited DC Motor Using Neural Network Optemized by Social Spider Algorithm, Engineering, Vol.8 No.1, 2016
• Waleed I. Hameed, Ahmed S. Kadhim, Ali Abdullah K. Al-Thuwaynee
• Citations: 14 (Details)

• Mechanistic Model versus Artificial Neural Network Model of a Single-Cell PEMFC, Engineering, Vol.6 No.8, 2014
• Brigitte Grondin-Perez, Sébastien Roche, Carole Lebreton, Michel Benne, Cédric Damour, Jean-Jacques Amangoua Kadjo
• Citations: 14 (Details)

• Meandering of Tributaries of the Tigris River Due to Mass Movements within Iraq, Engineering, Vol.6 No.11, 2014
• Varoujan K. Sissakian, Mawahib F. Abdul Jab’bar, Nadhir Al-Ansari, Sven Knutsson
• Citations: 14 (Details)

• The Need to Develop a Building Code for Iraq, Engineering, Vol.6 No.10, 2014
• Entidhar Al-Taie, Nadhir Al-Ansari, Sven Knutsson
• Citations: 14 (Details)

• Modular Approach for Investigation of the Dynamic Behavior of Three-Phase Induction Machine at Load Variation, Engineering, Vol.3 No.5, 2011
• Mazouz Salahat, Omar Barbarawe, Mohammad Abu Zalata, Shebel Asad
• Citations: 14 (Details)

• Fabrication and Characterization of Pulp/Chitosan Composite Membranes Crosslinked with 3-Methylglutaric Anhydride for Pervaporation of Ethanol/Water Mixture, Engineering, Vol.3 No.2, 2011
• Truong Thi Cam Trang, Nguyen Thi Nhung, Takaomi Kobayashi
• Citations: 14 (Details)

• Assessment of Medical Waste Incinerator Performance Based on Physical Characteristics of Ashes, Engineering, Vol.3 No.10, 2011
• S.V. Manyele, I.S. Kagonji, J. Mrisho
• Citations: 14 (Details)

• A Methodology for Filtering and Inversion of Gravity Data: An Example of Application to the Determination of the Moho Undulation in Morocco, Engineering, Vol.2 No.3, 2010
• Victor Corchete, Mimoun Chourak, Driss Khattach
• Citations: 14 (Details)

• A Device that can Produce Net Impulse Using Rotating Masses, Engineering, Vol.2 No.8, 2010
• Christopher G. Provatidis
• Citations: 14 (Details)

• Influence of Clad Metal Chemistry on Stress Corrosion Cracking Behaviour of Stainless Steels Claddings in Chloride Solution, Engineering, Vol.2 No.5, 2010
• Edmilson O. Correa, Reginaldo P. Barbosa, Augusto J. A. Buschinelli, Eduardo M. Silva
• Citations: 14 (Details)

• A Three-Axis Robot Using a Remote Network Control System, Engineering, Vol.2 No.11, 2010
• Min-Chie Chiu, Tian-Syung Lan, Ho-Chih Cheng
• Citations: 14 (Details)

• An Explicit Surface-Potential Based Biaxial Strained-Si n-MOSFET Model for Circuit Simulation, Engineering, Vol.2 No.11, 2010
• Tapas K. Maiti, Animesh Banerjee, Chinmay K. Maiti
• Citations: 14 (Details)

• Temperature Effects on the Electrical Performance of Large Area Multicrystalline Silicon Solar Cells Using the Current Shunt Measuring Technique, Engineering, Vol.2 No.11, 2010
• Hala Mohamed Abdel Mageed, Ahmed Faheem Zobaa, Mohamed Helmy Abdel Raouf, Abla Hosni Abd El-Rahman, Mohamed Mamdouh Abdel Aziz
• Citations: 14 (Details)

• Tool Wear Optimization for General CNC Turning Using Fuzzy Deduction, Engineering, Vol.2 No.12, 2010
• Tian-Syung Lan
• Citations: 14 (Details)

• Simulation Aspects of a Full-Car ATV Model Semi-Active Suspension, Engineering, Vol.4 No.7, 2012
• Kasi Kamalakkannan, A. Elayaperumal, Sathyaprasad Managlaramam
• Citations: 14 (Details)

• Reflection of Plane Waves from Free Surface of an Initially Stressed Rotating Orthotropic Dissipative Solid Half-Space, Engineering, Vol.4 No.3, 2012
• Baljeet Singh, Jyoti Arora
• Citations: 14 (Details)

• Concept Selection for Hydrocarbon Field Development Planning, Engineering, Vol.4 No.11, 2012
• J. Efrain Rodriguez-Sanchez, J. Martin Godoy-Alcantar, Israel Ramirez-Antonio
• Citations: 14 (Details)

• An Integrated Control Strategy Adopting Droop Control with Virtual Inductance in Microgrid, Engineering, Vol.5 No.1B, 2013
• Jianjun Su, Jieyun Zheng, Demin Cui, Xiaobo Li, Zhijian Hu, Chengxue Zhang
• Citations: 14 (Details)

• In vitro Rooting of Podophyllum Hexandrum and Transplanting Technique, Engineering, Vol.4 No.10B, 2012
• Qi Guo, Jianping Zhou, Zhiye Wang, Hui Yang
• Citations: 14 (Details)

• Thermal Comfort Zone for Thai People, Engineering, Vol.5 No.5, 2013
• Juntakan Taweekun, Ar-U-Wat Tantiwichien
• Citations: 14 (Details)

• Climate Change: Droughts and Increasing Desertification in the Middle East, with Special Reference to Iraq, Engineering, Vol.14 No.7, 2022
• Nasrat Adamo, Nadhir Al-Ansari, Varoujan Sissakian, Khalid Jehad Fahmi, Salwan Ali Abed
• Citations: 14 (Details)

• The Optimal Inventory Policy of Production Management, Engineering, Vol.5 No.5A, 2013
• Shou-Mei Su, Shy-Der Lin
• Citations: 13 (Details)

• An Amperometric Sensor for Sunset Yellow FCF Detection Based on Molecularly Imprinted Polypyrrole, Engineering, Vol.4 No.10B, 2012
• Jinfeng Xu, Yi Zhang, Hao Zhou, Mingwei Wang, Peidong Xu, Juankun Zhang
• Citations: 13 (Details)

• Verification of Chiller Performance Promotion and Energy Saving, Engineering, Vol.5 No.1A, 2013
• Yung-Chung Chang, Chao-Yuan Chen, Jyun-Ting Lu, Jin-Kwei Lee, Tian-Shuen Jan, Ching-Liang Chen
• Citations: 13 (Details)

• Mechanical Validation of Perfect Tibia 3D Model Using Computed Tomography Scan, Engineering, Vol.4 No.12, 2012
• Ehsan Taheri, Behrooz Sepehri, Reza Ganji
• Citations: 13 (Details)

• Seasonal Regression Models for Electricity Consumption Characteristics Analysis, Engineering, Vol.5 No.1B, 2013
• Yusri Syam Akil, Hajime Miyauchi
• Citations: 13 (Details)

• Ecological Problems Related to Mining-Metallurgical Industries and Innovatory, Energy-Efficient Ways of Solving Them, Engineering, Vol.4 No.2, 2012
• Guranda Jishkariani, Gigo Jandieri, David Sakhvadze, Giorgi Tavadze, Garegin Zakharov Giorgi Oniashvili, Zurab Aslamazishvili
• Citations: 13 (Details)

• A New Model for Transmission Network Expansion and Reactive Power Planning in a Deregulated Environment, Engineering, Vol.4 No.2, 2012
• Amin Mahmoudabadi, Masoud Rashidinejad, Majid Zeinaddini-Maymand
• Citations: 13 (Details)

• Using Image Analysis for Structural and Mechanical Cha-racterization of Nanoclay Reinforced Polypropylene Com-posites, Engineering, Vol.2 No.10, 2010
• Turup Pandurangan Mohan, Krishnan Kanny
• Citations: 13 (Details)

• Model of Rotation Accuracy of High-Speed Spindles on Ball Bearings, Engineering, Vol.2 No.7, 2010
• Jeong-Du Kim, Igor Zverv, Keon-Beom Lee
• Citations: 13 (Details)

• Numerical Calculation of Dynamic Response for Multi-Span Non-Uniform Beam Subjected to Moving Mass with Friction, Engineering, Vol.2 No.5, 2010
• Junping Pu, Peng Liu
• Citations: 13 (Details)

• The Stretch, Limit and Path Forward for Particle Reinforced Metal Matrix Composites of 7075 Al-Alloys, Engineering, Vol.2 No.4, 2010
• Rupa Dasgupta
• Citations: 13 (Details)

• Finite Element Analysis of Von-Mises Stress Distribution in a Spherical Shell of Liquified Natural Gas (Lng) Pressure Vessels, Engineering, Vol.3 No.10, 2011
• O. A. Adeyefa, O. O. Oluwole
• Citations: 13 (Details)

• The Design of Heat Exchangers, Engineering, Vol.3 No.9, 2011
• Arturo Reyes-León, Miguel Toledo Velázquez, Pedro Quinto-Diez, Florencio Sánchez-Silva, Juan Abugaber-Francis, Celerino Reséndiz-Rosas
• Citations: 13 (Details)

• Modulation Index Effect on the 5-Level SHE-PWM Voltage Source Inverter, Engineering, Vol.3 No.2, 2011
• Hassan Feshki Farahani, H. Sarabadani
• Citations: 13 (Details)

• Investigations on Non-Condensation Gas of a Heat Pipe, Engineering, Vol.3 No.4, 2011
• Jung-Chang Wang
• Citations: 13 (Details)

• A Multiobjective Optimization Method for Designing M-Channel NPR Cosine Modulated Filter Bank for Image Compression, Engineering, Vol.7 No.2, 2015
• Anamika Jain, Aditya Goel
• Citations: 13 (Details)

• Visual Composition of Complex Queries on an Integrative Genomic and Proteomic Data Warehouse, Engineering, Vol.5 No.10B, 2013
• Francesco Pessina, Marco Masseroli, Arif Canakoglu
• Citations: 13 (Details)

• Power Law Exponents for Vertical Velocity Distributions in Natural Rivers, Engineering, Vol.5 No.12, 2013
• Hae-Eun Lee, Chanjoo Lee, Youg-Jeon Kim, Ji-Sung Kim, Won Kim
• Citations: 13 (Details)

• Creating a Dataset to Boost Civil Engineering Deep Learning Research and Application, Engineering, Vol.12 No.3, 2020
• Murad Al Qurishee, Weidong Wu, Babatunde Atolagbe, Joseph Owino, Ignatius Fomunung, Mbakisya Onyango
• Citations: 13 (Details)

• Study of the Influence of Silkworm Feeding Conditions on the Quality of Cocoons and Properties of the Cocoon Shell, Engineering, Vol.11 No.11, 2019
• Rakhimov Alisher, Sulaymonov Sharifjon, Rakhimov Akmal
• Citations: 13 (Details)

• Long Term Application of a Vehicle-Based Health Monitoring System to Short and Medium Span Bridges and Damage Detection Sensitivity, Engineering, Vol.9 No.2, 2017
• Ayaho Miyamoto, Jari Puttonen, Akito Yabe
• Citations: 13 (Details)

• Structural Properties of Baked Clay Bricks Fired with Alternate Fuels, Engineering, Vol.8 No.10, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 13 (Details)

• An Approach to Fault Diagnosis of Rotating Machinery Using the Second-Order Statistical Features of Thermal Images and Simplified Fuzzy ARTMAP, Engineering, Vol.9 No.6, 2017
• Faisal Al Thobiani, Van Tung Tran, Tiedo Tinga
• Citations: 13 (Details)

• Research on Corrosion Protection of Buried Steel Pipeline, Engineering, Vol.9 No.5, 2017
• Xiaoxu Chen, Yang Zhao
• Citations: 13 (Details)

• The Saw Gin Stand with Adjustable Movement of the Roll Box, Engineering, Vol.10 No.8, 2018
• Umarov Akmal, Akhmedkhodzhaev Khamit, Sarimsakov Akramjon, Kenjaeva Muazzam
• Citations: 12 (Details)

• Near-Infrared Spectroscopy Combined with Partial Least Squares Discriminant Analysis Applied to Identification of Liquor Brands, Engineering, Vol.9 No.2, 2017
• Bin Yang, Lijun Yao, Tao Pan
• Citations: 12 (Details)

• Gas Production from Offshore Methane Hydrate Layer and Seabed Subsidence by Depressurization Method, Engineering, Vol.8 No.6, 2016
• Hiroki Matsuda, Takafumi Yamakawa, Yuichi Sugai, Kyuro Sasaki
• Citations: 12 (Details)

• Investigation of the Ginning Process on ДП Series Saw Gin Stands, Engineering, Vol.11 No.8, 2019
• Khamit Axmedxodjayev, Akmal Umarov, Kamola Ortiqova
• Citations: 12 (Details)

• Two-Capacitor Electrostatic Microgenerators, Engineering, Vol.5 No.11A, 2013
• Igor L. Baginsky, Edward G. Kostsov, Victor F. Kamishlov
• Citations: 12 (Details)

• Behavior Characteristics of Bonded Type Anchorage for CFRP Tendon, Engineering, Vol.5 No.11, 2013
• Jong Sup Park, Woo Tai Jung, Jae Yoon Kang, Moon Seoung Kum
• Citations: 12 (Details)

• Load Transfer Test of Post-Tensioned Anchorage Zone in Ultra High Performance Concrete, Engineering, Vol.7 No.3, 2015
• Jee-Sang Kim, Changbin Joh, Yoon-Seok Choi
• Citations: 12 (Details)

• Connection between Concrete Layers with Different Strengths, Engineering, Vol.7 No.7, 2015
• Jae Yoon Kang, Jong Sup Park, Woo Tai Jung, Moon Seoung Keum
• Citations: 12 (Details)

• Mexican Sign Language Recognition Using Jacobi-Fourier Moments, Engineering, Vol.7 No.10, 2015
• Francisco Solís, Carina Toxqui, David Martínez
• Citations: 12 (Details)

• A Smoothing Neural Network Algorithm for Absolute Value Equations, Engineering, Vol.7 No.9, 2015
• Feiran Wang, Zhensheng Yu, Chang Gao
• Citations: 12 (Details)

• Comparison between the Isotope Tracking Method and Resistivity Tomography of Earth Rock-Fill Dam Seepage Detection, Engineering, Vol.3 No.4, 2011
• Mingjie Zhao, Hui Wang, Xiao Sun, Yao Zhang
• Citations: 12 (Details)

• Machinability Study of Titanium (Grade-5) Alloy Using Design of Experiment Technique, Engineering, Vol.3 No.6, 2011
• Kali Dass, S. R Chauhan
• Citations: 12 (Details)

• A QoE Assessment System in Distance Education, Engineering, Vol.3 No.1, 2011
• Dengyin Zhang, Yangyang Xu, Chunling Cheng
• Citations: 12 (Details)

• Effect of Oscillating Jet Velocity on the Jet Impingement Cooling of an Isothermal Surface, Engineering, Vol.1 No.3, 2009
• Nawaf H. SAEID
• Citations: 12 (Details)

• Turbulent Flow Simulations through Tarbela Dam, Engineering, Vol.2 No.7, 2010
• Muhammad Abid, Adnan Aslam Noon
• Citations: 12 (Details)

• Wind Turbine Tower Optimization under Various Requirements by Using Genetic Algorithm, Engineering, Vol.2 No.8, 2010
• Serdar Yıldırım, İbrahim Özkol
• Citations: 12 (Details)

• Effect of Acidic Catalyst on Properties of Novel Conductive Copolymer Films Made of Pyrrole and Formyl Pyrrole, Engineering, Vol.4 No.3, 2012
• Yusuke Hoshina, Takaomi Kobayashi
• Citations: 12 (Details)

• Effect of Copper Content on Compressive Strength and Microstructure of Dental Amalgams, Engineering, Vol.4 No.3, 2012
• Akram Hasheminezhad, Seyed Mojtaba Zebarjad, Seyed Abdolkarim Sajjadi, Laleh Rahanjam
• Citations: 12 (Details)

• Numerical Study of Natural Convection in a Two-Dimensional Enclosure with a Sinusoidal Boundary Thermal Condition Utilizing Nanofluid, Engineering, Vol.4 No.8, 2012
• Ibtissam El Bouihi, Rachid Sehaqui
• Citations: 12 (Details)

• Design Of MV/LV Substation Transformer, Engineering, Vol.5 No.1B, 2013
• Sabir MESSALTI, Fares Zitouni, Issam Griche
• Citations: 12 (Details)

• Effect of Clay Fines on the Behavior of Self-Compacting Concrete, Engineering, Vol.5 No.2, 2013
• Zine Eddine Abib, Haifa Gaher-Abib, Fattoum Kharchi
• Citations: 12 (Details)

• The Poly(vinyl alcohol)-Immobilized Photobacteria for Toxicology Monitoring, Engineering, Vol.4 No.10B, 2012
• Kristina A. Alenina, Leyla E. Aleskerova, Polina B. Kascheyeva, Anvar D. Ismailov
• Citations: 12 (Details)

• New Application, Development and Aerospace Prospect of fNIR, Engineering, Vol.5 No.5B, 2013
• Jinjin Pan, Xuejun Jiao
• Citations: 12 (Details)

• Fuzzy Set Based Models and Methods of Decision Making and Power Engineering Problems, Engineering, Vol.5 No.5A, 2013
• Petr Ya. Ekel, Illya V. Kokshenev, Roberta O. Parreiras, Gladstone B. Alves, Paulo M. N. Souza
• Citations: 11 (Details)

• Influence Factor Analysis on Strength of Lime-Fly Ash Loess, Engineering, Vol.5 No.6, 2013
• Yufen Zhang, Zhiquan Zhang
• Citations: 11 (Details)

• Evaluating Reference Crop Evapotranspiration (ETo) in the Centre of Guanzhong Basin—Case of Xingping & Wugong, Shaanxi, China, Engineering, Vol.5 No.5, 2013
• Hussein I. Ahmed, Junmin Liu
• Citations: 11 (Details)

• Optimal Design of Photovoltaic–Battery Systems Using Interval Type-2 Fuzzy Adaptive Genetic Algorithm, Engineering, Vol.5 No.1B, 2013
• Penangsang Ontoseno, Muhammad Abdillah, Rony Seto Wibowo, Adi Soeprijanto
• Citations: 11 (Details)

• Infra-red Thermal Imaging of the Inner Canthus: Correlates with the Temperature of the Injured Human Brain, Engineering, Vol.4 No.10B, 2012
• Charmaine Childs, Mya Myint Zu, Aung Phyo Wai, Yeo Tseng Tsai, Shiqian Wu, Wang Li
• Citations: 11 (Details)

• Quantifying the Carbon Footprint of Lean Waste, Engineering, Vol.5 No.1, 2013
• Kristen D. Balinski, Katie Grantham
• Citations: 11 (Details)

• MHD Stagnation Point Flow and Heat Transfer over a Permeable Surface, Engineering, Vol.5 No.1, 2013
• Santosh Chaudhary, Pradeep Kumar
• Citations: 11 (Details)

• Customized Foot Orthosis Development by 3D Reconstruction of the CT Images, Engineering, Vol.4 No.10, 2012
• Sathish Kumar Paul, Sudesh Sivarasu, Lazar Mathew
• Citations: 11 (Details)

• An Experimental Study on a Characteristics of Flow around Groyne Area by Install Conditions, Engineering, Vol.4 No.10, 2012
• Joongu Kang, Hongkoo Yeo, Changsung Kim
• Citations: 11 (Details)

• Maintenance Capacity Planning: Determination of Maintenance Workforce, Engineering, Vol.4 No.1, 2012
• Adel M. Al-Shayea
• Citations: 11 (Details)

• Effect of K1, K2 Anti-Bacterial Agents on Tobacco Ralstonia Solanacearum, Engineering, Vol.2 No.11, 2010
• Anan Wang, Zhifeng Zhao, Zhenzhen Liu, Yixin Liu
• Citations: 11 (Details)

• A More Precise Computation of Along Wind Dynamic Response Analysis for Tall Buildings Built in Urban Areas, Engineering, Vol.2 No.4, 2010
• Shu-Xun Chen
• Citations: 11 (Details)

• Modeling and Investigation of the Wall Thickness Changes and Process Time in Thermo-Mechanical Tube Spinning Process Using Design of Experiments, Engineering, Vol.2 No.3, 2010
• Ahmad reza Fazeli Nahrekhalaji, Majid Ghoreishi, Ebrahim Sharifi Tashnizi
• Citations: 11 (Details)

• Fibre-Reinforced Generalized Thermoelastic Medium under Hydrostatic Initial Stress, Engineering, Vol.3 No.6, 2011
• Praveen Ailawalia, Shilpy Budhiraja
• Citations: 11 (Details)

• Design of Overall Slope Angle and Analysis of Rock Slope Stability of Chadormalu Mine Using Empirical and Numerical Methods, Engineering, Vol.3 No.9, 2011
• Mahdi Rasouli Maleki, Mohammad Mahyar, Kambiz Meshkabadi
• Citations: 11 (Details)

• Flexural Bond Behavior of Rebar in Ultra-High Performance Concrete Beams Considering Lap-Splice Length and Cover Depth, Engineering, Vol.8 No.3, 2016
• Seongjun Kim, Jungwoo Lee, Changbin Joh, Imjong Kwahk
• Citations: 11 (Details)

• A Study on the Bond Strength between High Performance Concrete and Reinforcing Bar, Engineering, Vol.7 No.7, 2015
• Eun Suk Choi, Jung Woo Lee, Seong Jun Kim, Jong Won Kwark
• Citations: 11 (Details)

• Using Fuzzy Theory in %GR&R and NDC of Measurement System Analysis, Engineering, Vol.7 No.4, 2015
• Tsu-Ming Yeh, Fan-Yun Pai, Chi-Wen Huang
• Citations: 11 (Details)

• An ICME Approach for Optimizing Thin-Welded Structure Design, Engineering, Vol.6 No.13, 2014
• Guoqing Gou, Yuping Yang, Hui Chen
• Citations: 11 (Details)

• Comparative Electrochemical Noise Study of the Corrosion of Different Alloys Exposed to Chloride Media, Engineering, Vol.6 No.13, 2014
• Adham M. Nagiub
• Citations: 11 (Details)

• Comparative Examinations of Single Bored Piles Using International Codes, Engineering, Vol.5 No.10, 2013
• Mohamed Mosad El-Gendy, Ibrahim A. El Araby, Mohamed A. Kamal
• Citations: 11 (Details)

• Sleep Apnea Detection Using Adaptive Neuro Fuzzy Inference System, Engineering, Vol.5 No.10B, 2013
• Cafer Avci, Gökhan Bilgin
• Citations: 11 (Details)

• Skin Cancer Detection Using Temperature Variation Analysis, Engineering, Vol.5 No.10B, 2013
• Ahmed M. Nasr Moustafa, Hamed Hamid Muhammed, Moustapha Hassan
• Citations: 11 (Details)

• Macro Rain Water Harvesting Network to Estimate Annual Runoff at Koysinjaq (Koya) District, Kurdistan Region of Iraq, Engineering, Vol.5 No.12, 2013
• Saleh Zakaria, Nadhir Al-Ansari, Yaseen T. Mustafa, M. D. J. Alshibli, Sven Knutsson
• Citations: 11 (Details)

• Finite Element Method Applied to the Eigenvalue Analysis of Flexible Rotors Supported by Journal Bearings, Engineering, Vol.6 No.3, 2014
• Wéderley M. Miranda, Marco Tulio C. Faria
• Citations: 11 (Details)

• On Clustering Algorithms for Biological Data, Engineering, Vol.5 No.10B, 2013
• Xiaowan Li, Fei Zhu
• Citations: 11 (Details)

• Analysis of Pull-Out Behaviour of Straight and Hooked End Steel Fibres, Engineering, Vol.11 No.6, 2019
• Sadoon Abdallah, David W. A. Rees
• Citations: 11 (Details)

• Smoothed Particle Hydrodynamic Modelling of Hydraulic Jumps: Bulk Parameters and Free Surface Fluctuations, Engineering, Vol.8 No.6, 2016
• Patrick Jonsson, Pär Jonsén, Patrik Andreasson, T. Staffan Lundström, J. Gunnar I. Hellström
• Citations: 11 (Details)

• Bond Durability of Carbon-Microfiber-Reinforced Alkali-Activated High-Temperature Cement Adhering to Carbon Steel, Engineering, Vol.9 No.2, 2017
• Toshifumi Sugama, Tatiana Pyatina
• Citations: 11 (Details)

• Probabilistic Modelling of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites during Solidification in Additive Manufacturing, Engineering, Vol.10 No.4, 2018
• Muhammad Musaddique Ali Rafique
• Citations: 11 (Details)

• Stabilization of Clayey Silt Soil Using Small Amounts of Petrit T, Engineering, Vol.9 No.6, 2017
• Wathiq Al-Jabban, Sven Knutsson, Jan Laue, Nadhir Al-Ansari
• Citations: 11 (Details)

• Recent Development and Application of Geothermal Heat Pump Systems in Cold-Climate Regions of the US: A Further Investigation, Engineering, Vol.9 No.7, 2017
• Yao Yu, Rui Miao, Louis Miller, Huojun Yang, Gaylord Olson
• Citations: 11 (Details)

• Analysis of Waste-Rock Transportation Process Performance in an Open-Pit Mine Based on Statistical Analysis of Cycle Times Data, Engineering, Vol.9 No.7, 2017
• Samwel Victor Manyele
• Citations: 11 (Details)

• Calculation Energy of Efficiency New Ginning Machine, Engineering, Vol.14 No.4, 2022
• Shuhrat Mamatovich Azizov
• Citations: 11 (Details)

• Geophysical Modeling with Satellite Gravity Data: Eigen-6C4 vs. GGM Plus, Engineering, Vol.13 No.12, 2021
• Miguel Camacho, Román Alvarez
• Citations: 11 (Details)

• Designing a New Design of a Loading Cylinder for Pneumomechanical Spinning Machines, Engineering, Vol.10 No.6, 2018
• Mirzaev Otabek Abdukarimovich, Akhmedov Kamol Ibragimovich, Sarimsakov Olimjon Sharipjanovich
• Citations: 10 (Details)

• Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine, Engineering, Vol.10 No.8, 2018
• Sarimsakov Akramjon, Muradov Rustam, Umarov Akmal, Kurbanov Dilmurat
• Citations: 10 (Details)

• Movement of the Trash Inside of Fiber Material When Available Elastic Force of Clutch, Engineering, Vol.10 No.9, 2018
• Ilkhom Madumarov, Botirjon Mardonov, Rakhmatjon Ruzmetov, Temur Tuychiev
• Citations: 10 (Details)

• Assessment of Groundwater Vulnerability in Northern Babylon Governorate, Iraq, Engineering, Vol.8 No.12, 2016
• Qais Al-Madhlom, Nadhir Al-Ansari, Hussain M. Hussain
• Citations: 10 (Details)

• Modification of Caster Oil and Study Its Efficiency as Corrosion Inhibitors in Formation Water Media, Engineering, Vol.9 No.3, 2017
• Hikmat AbduLRahem Ali
• Citations: 10 (Details)

• Design and Optimization of Steel Car Body Structures via Local Laser-Strengthening, Engineering, Vol.8 No.5, 2016
• Markus Wagner, Axel Jahn, Eckhard Beyer, Daniel Balzani
• Citations: 10 (Details)

• Design and Fabrication of a High Voltage Lightning Impulse Generator, Engineering, Vol.8 No.3, 2016
• Attiq Ur-Rehman, Nasrullah Khan
• Citations: 10 (Details)

• Analysis and Interpretation of Steering Geometry of Automobile Using Artificial Neural Network Simulation, Engineering, Vol.11 No.4, 2019
• Pramod N. Belkhode
• Citations: 10 (Details)

• Review of Anomaly Detection Systems in Industrial Control Systems Using Deep Feature Learning Approach, Engineering, Vol.13 No.1, 2021
• Raogo Kabore, Adlès Kouassi, Rodrigue N’goran, Olivier Asseu, Yvon Kermarrec, Philippe Lenca
• Citations: 10 (Details)

• Geometric Correction Analysis of Highly Distortion of Near Equatorial Satellite Images Using Remote Sensing and Digital Image Processing Techniques, Engineering, Vol.14 No.1, 2022
• Hayder Dibs, Shattri Mansor, Noordin Ahmad, Nadhir Al-Ansari
• Citations: 10 (Details)

• Vibration Signals and Condition Monitoring for Wind Turbines, Engineering, Vol.5 No.12, 2013
• Dimitrios Koulocheris, Georgios Gyparakis, Andonios Stathis, Theodore Costopoulos
• Citations: 10 (Details)

• The Study on Community Health Education of Empty Nest Elderly, Engineering, Vol.5 No.10B, 2013
• Ling Gao, Xue Cao, Min Zhang
• Citations: 10 (Details)

• Friction Material Temperature Distribution and Thermal and Mechanical Contact Stress Analysis, Engineering, Vol.6 No.13, 2014
• Carlos Abilio Passos Travaglia, Luiz Carlos Rolim Lopes
• Citations: 10 (Details)

• Development of Gulley Ali Beg Gorge in Rawandooz Area, Northern Iraq, Engineering, Vol.7 No.1, 2015
• Varoujan K. Sissakian, Mawaheb F. Abdul Jab'bar, Nadhir Al-Ansari, Sven Knutsson
• Citations: 10 (Details)

• Influence of Control Modes of Grid-Connected Solar Photovoltaic Generation on Grid Power Flow, Engineering, Vol.6 No.13, 2014
• Zakaria Al-Omari
• Citations: 10 (Details)

• A Study on the Performance of Absorbing Boundaries Using Dashpot, Engineering, Vol.6 No.10, 2014
• Hee Seok Kim
• Citations: 10 (Details)

• Ventilation Solutions in Renovated Apartment Buildings in Cold Climate Conditions, Engineering, Vol.7 No.3, 2015
• Teet-Andrus Koiv, Alo Mikola, Raimo Simson
• Citations: 10 (Details)

• Microwave Heating of Liquid Foods, Engineering, Vol.7 No.6, 2015
• Vittorio Romano, Rino Apicella
• Citations: 10 (Details)

• Performance of a Large-Scale Medical Waste Incinerator in a Referral Hospital, Engineering, Vol.7 No.10, 2015
• Veilla E. Matee, Samwel V. Manyele
• Citations: 10 (Details)

• Development and Application of Real-time Bridge Scour Monitoring System, Engineering, Vol.3 No.10, 2011
• Joongu Kang
• Citations: 10 (Details)

• Analysis of the Effects of Valve Propagated Pressure Surge on Pipe Flow, Engineering, Vol.3 No.11, 2011
• Barinaadaa Thaddeus Lebele-Alawa, Felix Ezekiel Oparadike
• Citations: 10 (Details)

• Application of Tikhonov Regularization Technique to the Kinetic Data of an Autocatalytic Reaction: Pyrolysis of N-Eicosane, Engineering, Vol.3 No.12, 2011
• Sunday C. Omowunmi, Alfred A. Susu
• Citations: 10 (Details)

• Channel Response Prediction for Abandoned Channel Restoration and Applicability Analysis, Engineering, Vol.3 No.5, 2011
• Il Hong, Joongu Kang, Hongkoo Yeo, Yonguk Ryu
• Citations: 10 (Details)

• Modeling of Slab Induction Heating in Hot Rolling by FEM, Engineering, Vol.3 No.4, 2011
• Ruibin Mei, Changsheng Li, Xianghua Liu, Bao Li, Bin Han
• Citations: 10 (Details)

• Proposing a New Model of Hangers in Pedestrian Suspension Bridges to Solve Hangers Slackness Problem, Engineering, Vol.3 No.4, 2011
• Majid Barghian, Hadi Moghadasi Faridani
• Citations: 10 (Details)

• Prediction of Shear Wave Velocity in Underground Layers Using SASW and Artificial Neural Networks, Engineering, Vol.3 No.3, 2011
• Andisheh Alimoradi, Hashem Shahsavani, Abolghasem Kamkar Rouhani
• Citations: 10 (Details)

• Optimum Shape of High Speed Impactor for Concrete Targets Using PSOA Heuristic, Engineering, Vol.2 No.4, 2010
• Francesco Ragnedda, Mauro Serra
• Citations: 10 (Details)

• Nonlinear Control of an Induction Motor Using a Reduced-Order Extended Sliding Mode Observer for Rotor Flux and Speed Sensorless Estimation, Engineering, Vol.2 No.10, 2010
• Olivier Asseu, Michel Abaka Kouacou, Theophile Roch Ori, Zié Yéo, Malandon Koffi, Xuefang Lin-Shi
• Citations: 10 (Details)

• The Effect of Initial Oxidation on Long-Term Oxidation of NiCoCrAlY Alloy, Engineering, Vol.2 No.8, 2010
• Chao Zhu, Xiaoyu Wu, Yuan Wu, Gongying Liang
• Citations: 10 (Details)

• An Inverse Analysis of the Erichsen Test Applied for the Automatic Identification of Sheet Materials Behavior, Engineering, Vol.2 No.7, 2010
• Adinel Gavrus, Mihaela Banu, Eric Ragneau, Catalina Maier
• Citations: 10 (Details)

• Challenges in Qualitative Accelerated Testing of WSN Hardware, Engineering, Vol.3 No.12, 2011
• Johanna Virkki, Liquan Chen, Yao Zhu, Yuewei Meng
• Citations: 10 (Details)

• Investigation of Viscosity's Effects on Continuous Casting of Steel Mold Powders Containing B₂O₃, Li₂O, TiO₂, Fe₂O₃, ZnO and Na₂O, Engineering, Vol.4 No.8, 2012
• Ahmadreza Arefpour, Ahmad Monshi, Taghi Khayamian, Ali Saidi
• Citations: 10 (Details)

• Experimental Strain Investigation of Bolt Torque Effect in Mechanically Fastened Joints, Engineering, Vol.4 No.7, 2012
• Nashwan Younis
• Citations: 10 (Details)

• Multi-objective Optimization of Multi-Agent Elevator Group Control System Based on Real-time Particle Swarm Optimization Algorithm, Engineering, Vol.4 No.7, 2012
• Yanwu Gu
• Citations: 10 (Details)

• Optimality Conditions and Algorithms for Direct Optimizing the Partial Differential Equations, Engineering, Vol.4 No.7, 2012
• Victor K. Tolstykh
• Citations: 10 (Details)

• Design Considerations for Pile Groups Supporting Marine Structures with Respect to Scour, Engineering, Vol.4 No.12, 2012
• Yasser E. Mostafa
• Citations: 10 (Details)

• Finite Element Analysis with Paraxial & Viscous Boundary Conditions for Elastic Wave Propagation, Engineering, Vol.4 No.12, 2012
• Hee Seok Kim
• Citations: 10 (Details)

• Numerical Study of Flow and Thermal Field on a Parallel Flow Vortex Tube, Engineering, Vol.4 No.11, 2012
• Dedy Zulhidayat Noor, Heru Mirmanto, Joko Sarsetiyanto, Denny M. E. Soedjono, Sri Bangun Setyawati
• Citations: 10 (Details)

• Mutations in Caprine DGAT1 and STAT5A Genes were Associated with Milk Production Traits, Engineering, Vol.4 No.10B, 2012
• Xiaopeng An, Jinxing Hou, Haibo Zhao, Chunmei Zhu, Quanmei Yan, Yuxuan Song, Jiangang Wang, Binyun Cao
• Citations: 10 (Details)

• Synergistic Effect of Allium cepa-Zn²⁺ System on the Corrosion of Carbon Steel in Ground Water, Engineering, Vol.5 No.2, 2013
• A. John Amalraj, J. Wilson Sahayaraj, A. Peter Pascal Regis, Arockia Sahayaraj, P. Pandian, P. Johnraj, A. Kasthuri, C. Kumar
• Citations: 10 (Details)

• Simulation and Analysis of PMSG-based Wind Energy Conversion System using Different Coverter Models, Engineering, Vol.5 No.1B, 2013
• Hua Ye, Juan Su, Songhuai Du
• Citations: 10 (Details)

• Formaldehyde Biosensor with Formaldehyde Dehydrogenase Adsorped on Carbon Electrode Modified with Polypyrrole and Carbon Nanotube, Engineering, Vol.4 No.10B, 2012
• Mingwei Wang, Shuhai Jiang, Yi Chen, Xiang Chen, Li Zhao, Juankun Zhang, Jinfeng Xu
• Citations: 10 (Details)

• Testing of the Ultra-Micro Gas Turbine Devices (1 - 10 kW) for Portable Power Generation at University of Roma 1: First Tests Results, Engineering, Vol.5 No.5, 2013
• Alfonso Calabria, Roberto Capata, Mario Di Veroli, Gianluca Pepe
• Citations: 10 (Details)

• Development of 16-channels Compact EEG System Using Real-time High-speed Wireless Transmission, Engineering, Vol.5 No.5B, 2013
• B. R. Myung, S. K. Yoo
• Citations: 9 (Details)

• Modelling Propagation of Stress Waves through Soil Medium for Ground Response Analysis, Engineering, Vol.5 No.7, 2013
• Palaniyandi Kamatchi, Gunturi Venkata Ramana, Ashok Kumar Nagpal, Nagesh R. Iyer
• Citations: 9 (Details)

• A Study on the Quality Control of Concrete during the Slip Form Erection of Pylon, Engineering, Vol.5 No.8, 2013
• Hyejin Yoon, Won Jong Chin, Hee Seok Kim, Young Jin Kim
• Citations: 9 (Details)

• Fast Determination of Vitamin B₂ Based on Molecularly Imprinted Electrochemical Sensor, Engineering, Vol.4 No.10B, 2012
• Peidong Xu, Changsheng Qiao, Shufeng Yang, Lijuan Liu, Mingwei Wang, Juankun Zhang
• Citations: 9 (Details)

• Incineration of Municipal Sewage Sludge in a Fluidized Bed Reactor, Engineering, Vol.5 No.1A, 2013
• Beata Kowarska, Jerzy Baron, Stanisław Kandefer, Witold Zukowski
• Citations: 9 (Details)

• TRIZ: The Enlightenment of the Training Mode of Excellent Chinese Engineers, Engineering, Vol.4 No.12, 2012
• Yiyang Fan, Yuting Qiu, Xing Zhang
• Citations: 9 (Details)

• Hybrid Method for the Formation of Biocomposites on the Surface of Stainless Steel Implants, Engineering, Vol.4 No.10, 2012
• Sergei I. Tverdokhlebov, Viktor P. Ignatov, Igor B. Stepanov, Denis O. Sivin, Danila G. Petlin
• Citations: 9 (Details)

• Method for Segmenting Tomato Plants in Uncontrolled Environments, Engineering, Vol.4 No.10, 2012
• Deny Lizbeth Hernández-Rabadán, Julian Guerrero, Fernando Ramos-Quintana
• Citations: 9 (Details)

• Construction of a Small Scale Laboratory for Solar Collectors and Solar Cells in a Developing Country, Engineering, Vol.5 No.1B, 2013
• Gentile Niko, Davidsson Henrik, Bernardo Ricardo, Gomes Joao, Gruffman Christian, Chea Luis, Mumba Chabu, Karlsson Björn
• Citations: 9 (Details)

• Mixing and Segregation Characteristics of Binary Granular Material in Tapered Fluidized Bed: A CFD Study, Engineering, Vol.4 No.4, 2012
• Harekrushna Sutar, Chandan Kumar Das
• Citations: 9 (Details)

• Lie Group Analysis for the Effects of Variable Fluid Viscosity and Thermal Radiation on Free Convective Heat and Mass Transfer with Variable Stream Condition, Engineering, Vol.2 No.8, 2010
• P. Loganathan, P. Puvi Arasu
• Citations: 9 (Details)

• Computer-Aided Solution to the Vibrational Effect of Instabilities in Gas Turbine Compressors, Engineering, Vol.2 No.8, 2010
• Ezenwa Alfred Ogbonnaya, Hyginus Ubabuike Ugwu, Charles Agbeju Nimibofa Johnson
• Citations: 9 (Details)

• Experimental Study of the Effects of Submerged Dikes on the Energy and Momentum Coefficients in Compound Channel, Engineering, Vol.2 No.11, 2010
• Alireza Keshavarzi, Mehdi Valizadeh, James Ball
• Citations: 9 (Details)

• Heat Distribution in Rectangular Fins Using Efficient Finite Element and Differential Quadrature Methods, Engineering, Vol.1 No.3, 2009
• ShahNor BASRI, M. M. FAKIR, F. MUSTAPHA, D. L. A. MAJID, A. A. JAAFAR
• Citations: 9 (Details)

• The Effect of Price Discount on Time-Cost Trade-off Problem Using Genetic Algorithm, Engineering, Vol.1 No.1, 2009
• Hadi Mokhtari, Abdollah Aghaie
• Citations: 9 (Details)

• Optimization of Permanent Magnet Skew in Permanent Magnet Linear Synchronous Motors Using Finite Element and Statistical Method, Engineering, Vol.3 No.6, 2011
• Gabriel González-Palomino, Javier Rivas-Conde, Edwin Laniado
• Citations: 9 (Details)

• A Comparative Study on Several Anti-Corrosion Materials for Power FGD System, Engineering, Vol.3 No.6, 2011
• Zhenyu Wang, Dongsheng Mei, Weitao Zhang, Enhou Han, Yushan Wang
• Citations: 9 (Details)

• Experimental Study on the Flow Characteristics of ￢-Type Groyne, Engineering, Vol.3 No.10, 2011
• Joongu Kang, Hongkoo Yeo
• Citations: 9 (Details)

• Exergy Analysis of Single Array Wind Farm Using Wake Effects, Engineering, Vol.3 No.9, 2011
• A. Jeya Saravanan, C. P. Karthikeyan, Anand A. Samuel
• Citations: 9 (Details)

• Performance of Green Aggregate Produced by Recycling Demolition Construction Wastes (Case Study of Tanta City), Engineering, Vol.8 No.2, 2016
• Alaa El-Din M. Sharkawi, Slah El-Din M. Almofty, Eng. Shady M. Abbass
• Citations: 9 (Details)

• Performance Optimization of Dual Pressure Heat Recovery Steam Generator (HRSG) in the Tropical Rainforest, Engineering, Vol.7 No.6, 2015
• Sidum Adumene, Barinaadaa Thaddeus Lebele-Alawa
• Citations: 9 (Details)

• The Flight of Albatross—How to Transform It into Aerodynamic Engineering?, Engineering, Vol.6 No.8, 2014
• Günther Pfeifhofer, Helmut Tributsch
• Citations: 9 (Details)

• Spatio-Temporal Kinematic Decomposition of Movements, Engineering, Vol.6 No.8, 2014
• Dimitri Volchenkov, Bettina E. Bläsing, Thomas Schack
• Citations: 9 (Details)

• A New Characterization Approach of Weld Nugget Growth by Real-Time Input Electrical Impedance, Engineering, Vol.6 No.9, 2014
• Yoke-Rung Wong, Xin Pang
• Citations: 9 (Details)

• Empirical Model to Calculate the Thermodynamic Wet-Bulb Temperature of Moist Air, Engineering, Vol.6 No.9, 2014
• Melitón Estrada-Jaramillo, Iván Vera-Romero, José Martínez-Reyes, Agustina Ortíz-Soriano, Edgar Barajas-Ledesma
• Citations: 9 (Details)

• Delaware Method Improvement for the Shell and Tubes Heat Exchanger Design, Engineering, Vol.6 No.4, 2014
• Miguel Toledo-Velázquez, Pedro Quinto-Diez, Juan C. Alzelmetti-Zaragoza, Sergio R. Galvan, Juan Abugaber-Francis, Arturo Reyes-León
• Citations: 9 (Details)

• Effect of Bearing Capacity on Designing Foundations in Iraq Using STAAD Pro-v8i, Engineering, Vol.6 No.6, 2014
• Entidhar Al-Taie, Nadhir Al-Ansari, Sven Knutsson
• Citations: 9 (Details)

• A Restricted, Adaptive Threshold Segmentation Approach for Processing High-Speed Image Sequences of the Glottis, Engineering, Vol.5 No.10B, 2013
• Mathew Blanco, Xin Chen, Yuling Yan
• Citations: 9 (Details)

• Sonothromblysis in Combination with Thrombolytic Drugs in a Rabbit Model Using MRI-Guidance, Engineering, Vol.5 No.10B, 2013
• Christakis Damianou, Nicos Mylonas, Kleanthis Ioannides
• Citations: 9 (Details)

• Wind Power Uncertainty and Power System Performance, Engineering, Vol.5 No.10A, 2013
• C. Lindsay Anderson, Judith B. Cardell
• Citations: 9 (Details)

• Computation of the Strand Resistance Using the Core Wire Strain Measurement, Engineering, Vol.5 No.11, 2013
• Keunhee Cho, Sung Tae Kim, Sung Yong Park, Young-Hwan Park
• Citations: 9 (Details)

• In Silico Molecular Interaction Studies of Suberoylanilide Hydroxamic Acid and Its Modified Compounds with Histones Deacetylase Class II Homo sapiens as Curative Measure towards Cervical Cancer, Engineering, Vol.5 No.10B, 2013
• Usman Sumo Friend Tambunan, Arli Aditya Parikesit, Tirtana Prasetia, Djati Kerami
• Citations: 9 (Details)

• Mosul Dam Problem and Stability, Engineering, Vol.13 No.3, 2021
• Nadhir Al-Ansari, Nasrat Adamo, Mahdi Rasheed Al-Hamdani, Kadhim Sahar, Riyadh E. A. Al-Naemi
• Citations: 9 (Details)

• Studying the Law of the Movement of Cotton Particle on a Saw Cylinder and the Interaction with Saw Teeth, Engineering, Vol.11 No.10, 2019
• Jamoliddin Ergashev, Khamid Akhmedhodjaev, Abdusamat Karimov, Juramirza Kayumov, Rashida Ergasheva, Shohruxmirzo Mahsudov
• Citations: 9 (Details)

• Water-Borne Wood Preservation and End-of-Life Removal History and Projection, Engineering, Vol.12 No.2, 2020
• Stephen T. Smith
• Citations: 9 (Details)

• Review on the Anchoring Mechanism and Application Research of Compression-Type Anchor, Engineering, Vol.8 No.11, 2016
• Jiansheng Tian, Li Hu
• Citations: 9 (Details)

• Double-Ring Infiltrometer for In-Situ Permeability Determination of Dam Material, Engineering, Vol.10 No.6, 2018
• Hans Rönnqvist
• Citations: 8 (Details)

• A Study of Temperature and Aging Effects on Eigenfrequencies of Concrete Bridges for Health Monitoring, Engineering, Vol.9 No.5, 2017
• Viet Ha Nguyen, Jean Mahowald, Sebastian Schommer, Stefan Maas, Arno Zuerbes
• Citations: 8 (Details)

• Flow Variation of the Major Tributaries of Tigris River Due to Climate Change, Engineering, Vol.11 No.8, 2019
• Nahlah Abbas, Nadhir Al-Ansari, Saleh Wasimi, Abdulla M. Al-Rawabdeh
• Citations: 8 (Details)

• Efficiency of Moroccan Seaports: Application of DEA Using Window Analysis, Engineering, Vol.11 No.2, 2019
• Mahdi Birafane, Moad El Abdi
• Citations: 8 (Details)

• Research of the Issue of Lightening the Construction of the Gin Saw Cylinder, Engineering, Vol.13 No.4, 2021
• Juraeva Gulkhayo Ravshanbekovna, Muradov Rustam Muradovich, Abduvakhidov Mutakhkhirkhon Mubashirovich
• Citations: 8 (Details)

• Optimizing Reverse Osmosis Membrane Parameters through the Use of the Solution-Diffusion Model: A Review, Engineering, Vol.14 No.1, 2022
• Farah Z. Najdawi, Kaleb T. Neptune
• Citations: 8 (Details)

• Mathematical Modeling of the Bulk Density Property of Knitted Fabrics, Engineering, Vol.14 No.1, 2022
• Iroda Ibrohimovna Kamalova, Baxtiyor Farruxovich Mirusmanov, Juramirza Abdiramatovich Kayumov, Axtam Akramovich Qosimov, Muborak Nosir Qizi Yusupova
• Citations: 8 (Details)

• An Optimized Damage Identification Method of Beam Using Wavelet and Neural Network, Engineering, Vol.12 No.10, 2020
• Bingrong Miao, Mingyue Wang, Shuwang Yang, Yaoxiang Luo, Caijin Yang
• Citations: 8 (Details)

• The Mathematical Model of Seed Movement on a Concave Profile Rib, Engineering, Vol.12 No.3, 2020
• Khayrullo Sharipov, Khamit Akhmedxodjayev, Mukhammadjon Tojiboyev, Olimjon Sarimsakov
• Citations: 8 (Details)

• Algorithms for Chromosome Classification, Engineering, Vol.5 No.10B, 2013
• Wenzhong Yan, Lei Bai
• Citations: 8 (Details)

• Comparative Finite Element Analysis of Jaipur Foot and Polyurethane Foot, Engineering, Vol.5 No.10B, 2013
• Priya Sharma, Shubhda Sharma, S. Vidhya, M. K. Mathur
• Citations: 8 (Details)

• PI-MPC Frequency Control of Power System in the Presence of DFIG Wind Turbines, Engineering, Vol.5 No.9B, 2013
• Michael Z. Bernard, T. H. Mohamed, Raheel Ali, Yasunori Mitani, Yaser Soliman Qudaih
• Citations: 8 (Details)

• Feature Extraction by Multi-Scale Principal Component Analysis and Classification in Spectral Domain, Engineering, Vol.5 No.10B, 2013
• Shengkun Xie, Anna T. Lawnizak, Pietro Lio, Sridhar Krishnan
• Citations: 8 (Details)

• Camber Angle Control Method Corresponding to the Electric Vehicle Age, Engineering, Vol.6 No.8, 2014
• Takahiko Yoshino, Hiromichi Nozaki
• Citations: 8 (Details)

• Earth Resources Exploitation and Sustainable Development: Geological and Engineering Perspectives, Engineering, Vol.8 No.1, 2016
• C. C. Iwuji, O. C. Okeke, B. C. Ezenwoke, C. C. Amadi, H. Nwachukwu
• Citations: 8 (Details)

• Optimization of the Implementation Process and Physical Properties of Cotton ( Gossipium hirsutum ) and Kenaf ( Hibiscus cannabinus L.) Wooden Chipboard, Engineering, Vol.7 No.12, 2015
• Sagnaba Soulama, Kokou Esso Atcholi, Bétaboalé Naon, Komi Kadja, Komla Sanda
• Citations: 8 (Details)

• Slope Stability Analysis of Itakpe Iron Ore Mine, Itakpe, Nigeria, Engineering, Vol.3 No.6, 2011
• Rasheed A. Adebimpe, Jide Muili Akande, Chinwuba Arum
• Citations: 8 (Details)

• Comparison of Wind-Induced Displacement Characteristics of Buildings with Different Lateral Load Resisting Systems, Engineering, Vol.3 No.3, 2011
• Chinwuba Arum, Akinloye Akinkunmi
• Citations: 8 (Details)

• Probability Analysis for the Damage of Gravity Dam, Engineering, Vol.3 No.4, 2011
• Qiang Xu, Jing Li, Jianyun Chen
• Citations: 8 (Details)

• Modeling and Adaptive Self-Tuning MVC Control of PAM Manipulator Using Online Observer Optimized with Modified Genetic Algorithm, Engineering, Vol.3 No.2, 2011
• Ho Pham Huy Anh, Nguyen Thanh Nam
• Citations: 8 (Details)

• Orthogonal-Least-Squares Forward Selection for Parsimonious Modelling from Data, Engineering, Vol.1 No.2, 2009
• Sheng CHEN
• Citations: 8 (Details)

• Electrical Performance Study of a Large Area Multicrystalline Silicon Solar Cell Using a Current Shunt and a Micropotentiometer, Engineering, Vol.2 No.4, 2010
• Hala Mohamed Abdel Mageed, Ahmed Faheem Zobaa, Ahmed Ghitas, Mohamed Helmy Abdel Raouf, Mohamed Sabry, Abla Hosni Abd El-Rahman, Mohamed Mamdouh Abdel Aziz
• Citations: 8 (Details)

• Tunable Bandwidth Third Order Switched-Capacitor with Multiple Feedbacks Filter for Different Center Frequencies, Engineering, Vol.2 No.3, 2010
• Ganeshchandra N. Shinde, Sanjay R. Bhagat
• Citations: 8 (Details)

• Vibration Monitoring of Rotating Systems, Engineering, Vol.2 No.1, 2010
• K. N. EDE, E. A. OGBONNAYA, M. T. LILLY, S. O. T. OGAJI, S. D. PROBERT
• Citations: 8 (Details)

• The Effect of Near-Wall Vortices on Wall Shear Stress in Turbulent Boundary Layers, Engineering, Vol.2 No.3, 2010
• Shuangxi Guo, Wanping Li
• Citations: 8 (Details)

• Tunable Erbium-Doped Fiber Lasers Using Various Inline Fiber Filters, Engineering, Vol.2 No.8, 2010
• Shien-Kuei Liaw, Kuei-Chu Hsu, Nan-Kuang Chen
• Citations: 8 (Details)

• Dynamic Stress Intensity Factors for Three Parallel Cracks in an Infinite Plate Subject to Harmonic Stress Waves, Engineering, Vol.2 No.7, 2010
• Shouetsu Itou
• Citations: 8 (Details)

• Integrated Optimization of Mechanisms with Genetic Algorithms, Engineering, Vol.2 No.6, 2010
• Jean-Luc Marcelin
• Citations: 8 (Details)

• Carbonic Gas Randomness Effect on Reinforced Concrete Carbonation, Engineering, Vol.4 No.1, 2012
• Azhar Badaoui, M’hammed Badaoui, Fattoum Kharchi
• Citations: 8 (Details)

• Model-Based Split-Range Algorithm for the Temperature Control of a Batch Reactor, Engineering, Vol.4 No.9, 2012
• Miklós Gábor Balaton, Lajos Nagy, Ferenc Szeifert
• Citations: 8 (Details)

• Differential Evolution Immunized Ant Colony Optimization Technique in Solving Economic Load Dispatch Problem, Engineering, Vol.5 No.1B, 2013
• N. A. Rahmat, I. Musirin
• Citations: 8 (Details)

• Temperature Effect on Elasticity of Swollen Composite Formed from Polyacrylamide(PAAm) -Multiwall Carbon Nanotubes(MWNTs), Engineering, Vol.4 No.10, 2012
• Gülşen Akın Evingür, Önder Pekcan
• Citations: 8 (Details)

• Flow Characteristic Variations on Groyne Types for Aquatic Habitats, Engineering, Vol.4 No.11, 2012
• Joongu Kang, Hongkoo Yeo, Sanghwa Jung
• Citations: 8 (Details)

• Kinematical Analysis and Simulation of High-Speed Plate Carrying Manipulator Based on Matlab, Engineering, Vol.4 No.12, 2012
• Ke Wang, Jiping Zhou
• Citations: 8 (Details)

• Dynamic Performance of Fuel Cell Power Module for Mobility Applications, Engineering, Vol.5 No.2, 2013
• Bouziane Mahmah, Ghania Morsli, Mounia Belacel, Hocine Benmoussa, Soulef Achachera, Amina Benhamou, Maїouf Belhamel
• Citations: 8 (Details)

• Acoustic and Intraluminal Ultrasonic Technologies in the Diagnosis of Diseases in Gastrointestinal Tract: A Review, Engineering, Vol.5 No.5B, 2013
• Qian Lu, Orly Yadid-Pecht, Dan Sadowski, Martin P. Mintchev
• Citations: 8 (Details)

• Proportioning of Cement-Based Grout for Sealing Fractured Rock-Use of Packing Models, Engineering, Vol.5 No.10, 2013
• Mohammed Hatem Mohammed, Roland Pusch, Nadhir Al-Ansari, Sven Knutsson, Jan-Erik Jonasson, Mats Emborg, Alireza Pourbakhtiar
• Citations: 8 (Details)

• Jogging and Walking Analysis Using Wearable Sensors, Engineering, Vol.5 No.5B, 2013
• Ching Yee Yong, Rubita Sudirman, Ahmad Hazwan Ab Rahim, Nasrul Humaimi Mahmood, Kim Mey Chew
• Citations: 8 (Details)

• A New Algorithm for Computing the Determinant and the Inverse of a Pentadiagonal Toeplitz Matrix, Engineering, Vol.5 No.5A, 2013
• Yuehui Chen
• Citations: 8 (Details)

• Oil Transmission Pipelines Condition Monitoring Using Wavelet Analysis and Ultrasonic Techniques, Engineering, Vol.5 No.6, 2013
• Waheed Sami Abushanab
• Citations: 8 (Details)

• A Kinetic Study of Anaerobic Biodegradation of Food and Fruit Residues during Biogas Generation Using Initial Rate Method, Engineering, Vol.5 No.7, 2013
• William Wanasolo, Samwel Victor Manyele, John Makunza
• Citations: 7 (Details)

• Finite Element Modeling of Shop Built Spherical Pressure Vessels, Engineering, Vol.5 No.6, 2013
• Oludele Adeyefa, Oluleke Oluwole
• Citations: 7 (Details)

• Experimental Research on Spontaneous Combustion Tendency of High Volatile Blended Coals, Engineering, Vol.5 No.3, 2013
• Jinfeng Ma, Fei Shao, Junrui Shi, Zhijia Xue, Shuqun Wang, Hongtao Li, Huangxin Zhang
• Citations: 7 (Details)

• Measurement of the Lubricant Properties Using Hall Effect Sensor: A Study on Contamination and Viscosity, Engineering, Vol.5 No.4, 2013
• Witsarut Sriratana, Riichi Murayama
• Citations: 7 (Details)

• Monitoring Mental Fatigue in Analog Space Environment Using Optical Brain Imaging, Engineering, Vol.5 No.5B, 2013
• Xuejun Jiao, Jing Bai, Shanguang Chen, Qijie Li
• Citations: 7 (Details)

• Study on Technical Measures of Romashkino Oil Field after Entering Ultra-High Water Cut Stage, Engineering, Vol.5 No.7, 2013
• Liuli Lu, Zhibin Liu, Haohan Liu, Yongqin Yan
• Citations: 7 (Details)

• Computation of Impact Factor of High-Speed Railway Bridge by KTX Train Riding Test, Engineering, Vol.5 No.9, 2013
• Hyejin Yoon, Won Jong Chin, Jae Yoon Kang, Jongwon Kwark, Eui-Seung Hwang
• Citations: 7 (Details)

• Turbulence Modeling Applied to Flow over a Hydraulic Ball Check Valve, Engineering, Vol.5 No.8, 2013
• Leonid Grinis, Vitaly Haslavsky
• Citations: 7 (Details)

• A Thermochemical Process Using Expanding Plasma for Nitriding Thin Molybdenum Films at Low Temperature, Engineering, Vol.4 No.12, 2012
• Isabelle Jauberteau, Jean Louis Jauberteau, Said Touimi, Thérèse Merle-Méjean, Sylvain Weber, Annie Bessaudou
• Citations: 7 (Details)

• Investigation of Soil Aggressiveness towards Underground Fuel Storage Tanks and Water Pipelines in Parts of Bayelsa State, Southern Nigeria, Engineering, Vol.4 No.11, 2012
• Kenneth S. Okiongbo, Edirin Akpofure
• Citations: 7 (Details)

• Applying Photogrammetric Techniques to Determine Facade Decays: The Case Study of Zisa Palace, Italy, Engineering, Vol.4 No.11, 2012
• Emanuele Calabrò
• Citations: 7 (Details)

• Single Wire Electrical System, Engineering, Vol.4 No.11, 2012
• Michael Bank
• Citations: 7 (Details)

• Viscoelastic Effects on Unsteady Two-Dimensional and Mass Transfer of a Viscoelastic Fluid in a Porous Channel with Radiative Heat Transfer, Engineering, Vol.5 No.1, 2013
• Utpal Jyoti Das
• Citations: 7 (Details)

• Research on Coal Seam Floor Water Inrush Monitoring Based on Perception of IoT Coupled with GIS, Engineering, Vol.4 No.8, 2012
• Xiangrui Meng, Junhao Wang, Zhaoning Gao
• Citations: 7 (Details)

• A Study on Anchoring Ability of Three-Leg Micro Intestinal Robot, Engineering, Vol.4 No.8, 2012
• Wei Lin, Guozheng Yan
• Citations: 7 (Details)

• Mathematical Model to Locate Interference of Blast Waves from Multi-Hole Blasting Rounds, Engineering, Vol.4 No.3, 2012
• Sujit Kumar Mandal
• Citations: 7 (Details)

• Case Study: Hydraulic Model Experiment to Analyze the Hydraulic Features for Installing Floating Islands, Engineering, Vol.4 No.2, 2012
• Sanghwa Jung, Joongu Kang, Il Hong, Hongkoo Yeo
• Citations: 7 (Details)

• Effect of Lauroyl Glutamine on Biodegradation of Lubricating Oil and Simulation of Biodegradation Kinetics, Engineering, Vol.2 No.11, 2010
• Boshui Chen, Jiang Wu, Jianhua Fang, Weijiu Huang, Jiu Wang
• Citations: 7 (Details)

• A New Method for Finding the Thevenin and Norton Equivalent Circuits, Engineering, Vol.2 No.5, 2010
• George E. Chatzarakis
• Citations: 7 (Details)

• Consolidation Solutions of a Saturated Porothermoelastic Hollow Cylinder with Infinite Length, Engineering, Vol.2 No.1, 2010
• B. BAI
• Citations: 7 (Details)

• The Effects of Dimension Ratio and Horizon Length in the Micropolar Peridynamic Model, Engineering, Vol.3 No.6, 2011
• Y. Ferhat, I. Ozkol
• Citations: 7 (Details)

• A Simplified Procedure for Prediction of Ultimate Strength of Beam-Column Channel Sections, Engineering, Vol.3 No.10, 2011
• Osama Bedair
• Citations: 7 (Details)

• Industrial X-Ray Image Enhancement Algorithm based on AH and MSR, Engineering, Vol.3 No.10, 2011
• Wei Jie, Wang Dada, Yanwei Wang, Jin Li, Wang Lei, Hong Liang
• Citations: 7 (Details)

• Genetic Algorithm Based Performance Analysis of Self Excited Induction Generator, Engineering, Vol.3 No.8, 2011
• Hassan Ibrahim, Mostafa Metwaly
• Citations: 7 (Details)

• Power Quality Improvement of Large Power System Using a Conventional Method, Engineering, Vol.3 No.8, 2011
• Nazmus Sahadat, Shakhawat Hossain, Arifur Rahman, Sharif Taufique Atique
• Citations: 7 (Details)

• Experimental Study on the Flow Characteristics around the Refraction Groyne, Engineering, Vol.3 No.8, 2011
• Joongu Kang, Hongkoo Yeo, Sungjung Kim
• Citations: 7 (Details)

• Equivalence Theory Applied to Anisotropic Thin Plates, Engineering, Vol.3 No.7, 2011
• Madjid Haddad, Yves Gourinat, Miguel Charlotte
• Citations: 7 (Details)

• Experimental Data for Study on the Shielding Effect of Electromagnetic Wave, Engineering, Vol.3 No.7, 2011
• Chen-Ching Ting, Chien-Chih Chen
• Citations: 7 (Details)

• The Thermodynamic Model on Paraffin Wax Deposition Prediction, Engineering, Vol.7 No.12, 2015
• Baojun Liu, Wanting Sun, Chengting Liu, Liping Guo
• Citations: 7 (Details)

• Analytical Research on Deformation Monitoring of Large Span Continuous Rigid Frame Bridge during Operation, Engineering, Vol.7 No.8, 2015
• Aicheng Shan
• Citations: 7 (Details)

• Dynamic Performance Analysis of Gas-Liquid United Hydraulic Hammer, Engineering, Vol.7 No.8, 2015
• Zishan Xu, Guoping Yang, Hanghang Wei, Shutao Ni
• Citations: 7 (Details)

• High Effective FE Simulation Methods for Deformation and Residual Stress by Butt Welding of Thin Steel Plates, Engineering, Vol.6 No.9, 2014
• Mikihito Hirohata, Yoshito Itoh
• Citations: 7 (Details)

• A Branch-and-Bound Based Heuristic Algorithm for Minimizing Makespan in Machining-Assembly Flowshop Scheduling, Engineering, Vol.6 No.13, 2014
• Kazuko Morizawa
• Citations: 7 (Details)

• Mathematical Models to Simultaneously Determine Overtime Requirements and Schedule Cells, Engineering, Vol.7 No.2, 2015
• Gürsel A. Süer, Kush Mathur
• Citations: 7 (Details)

• Bentonite Adsorption & Coagulation Treatment of Recycled Fiber Pulping Wastewater, Engineering, Vol.5 No.10B, 2013
• Tingzhi Liu, Kaiyang Zheng, Defa Wang, Shuai Li, Haoyu Wang
• Citations: 7 (Details)

• Oxidization Resistance in Vivo for Raspberry Flavone, Engineering, Vol.5 No.10B, 2013
• Jinxu Sun, Huixia Zhu, Guangxiao Dong
• Citations: 7 (Details)

• Study of Multimedia Technology in Posture Training for the Elderly, Engineering, Vol.5 No.10B, 2013
• Chih-Chen Chen, De-Jou Hong, Shih-Ching Chen, Ying-Ying Shih, Yu-Luen Chen
• Citations: 7 (Details)

• Relationships between a Thiol-Disulfide System and Liposoluble Antioxidants with Cytogenetic Indices in Humans Exposed to Low Doses Radiation, Engineering, Vol.5 No.10B, 2013
• G. F. Ivanenko, E. B. Burlakova
• Citations: 7 (Details)

• Emotional Speech Synthesis Based on Prosodic Feature Modification, Engineering, Vol.5 No.10B, 2013
• Ling He, Hua Huang, Margaret Lech
• Citations: 7 (Details)

• Can We Restore the Marches in Iraq (Garden of Eden)?, Engineering, Vol.12 No.7, 2020
• Nadhir Al-Ansari
• Citations: 7 (Details)

• Impact of Vertically-Suspended Environmental Enrichment and Two Densities of Fish on Circular Tank Velocity Profiles, Engineering, Vol.12 No.10, 2020
• Joshua M. A. Caasi, Joseph M. Barnes, Michael E. Barnes
• Citations: 7 (Details)

• Fractional Rider Deep Long Short Term Memory Network for Workload Prediction-Based Distributed Resource Allocation Using Spark in Cloud Gaming, Engineering, Vol.13 No.3, 2021
• Koné Kigninman Désiré, Kouassi Adlès Francis, Konan Hyacinthe Kouassi, Eya Dhib, Nabil Tabbane, Olivier Asseu
• Citations: 7 (Details)

• Development of a Series Hybrid Electric Aircraft Pushback Vehicle: A Case Study, Engineering, Vol.11 No.1, 2019
• Scott Cash, Quan Zhou, Oluremi Olatunbosun, Hongming Xu, Sean Davis, Robin Shaw
• Citations: 7 (Details)

• Optimization of the Deposition Rate of Tungsten Inert Gas Mild Steel Using Response Surface Methodology, Engineering, Vol.10 No.11, 2018
• Nicholas Afemhonkike Imhansoloeva, Joseph Ifeanyi Achebo, Kessington Obahiagbon, John Osadolor Osarenmwinda, Collins Eruogun Etin-Osa
• Citations: 7 (Details)

• The Movement of a Mixture of Cotton with an Air Stream during Pneumatic Transport by Pipeline of Variable Cross Section, Engineering, Vol.11 No.8, 2019
• Ibrohimjon Tursunov, Nodira Rajapova, Olimjon Sarimsakov, Botirjon Mardonov
• Citations: 7 (Details)

• Numerical Investigation of Turbulent Flow through Rectangular and Biconvex Shaped Trash Racks, Engineering, Vol.9 No.5, 2017
• Hans O. Åkerstedt, Sebastian Eller, T. Staffan Lundström
• Citations: 7 (Details)

• A Comparative Study of Majority/Minority Logic Circuit Synthesis Methods for Post-CMOS Nanotechnologies, Engineering, Vol.9 No.10, 2017
• Amjad Almatrood, Harpreet Singh
• Citations: 7 (Details)

• A Hand Prosthesis with an Under-Actuated and Self-Adaptive Finger Mechanism, Engineering, Vol.10 No.7, 2018
• R. A. R. C. Gopura, D. S. V. Bandara
• Citations: 7 (Details)

• Experimental Tests on a Pre-Heated Combustion Chamber for Ultra Micro Gas Turbine Device: Air/Fuel Ratio Evaluation, Engineering, Vol.8 No.11, 2016
• Roberto Capata, Kliton Kylykbashi, Alfonso Calabria, Mario Di Veroli
• Citations: 7 (Details)

• Channel Slope Effect on Energy Dissipation of Flow over Broad Crested Weirs, Engineering, Vol.8 No.12, 2016
• Shaymaa A. M. Al-Hashimi, Huda M. Madhloom, Thameen N. Nahi, Nadhir Al-Ansari
• Citations: 7 (Details)

• Evaluation of Foundation Settlement under Various Added Loads in Different Locations of Iraq Using Finite Element, Engineering, Vol.8 No.5, 2016
• Entidhar Al-Taie, Nadhir Al-Ansari, Sven Knutsson
• Citations: 7 (Details)

• Analysis on Technological Innovation of Civil Engineering Construction, Engineering, Vol.8 No.5, 2016
• Lili Hu
• Citations: 7 (Details)

• Annual Runoff and Sediment in Duhok Reservoir Watershed Using SWAT and WEPP Models, Engineering, Vol.8 No.7, 2016
• Mohammad E. Mohammad, Nadhir Al-Ansari, Sven Knutsson
• Citations: 7 (Details)

• Mechanism of Haibat Sultan Mountain Land-slide in Koya, North Iraq, Engineering, Vol.8 No.8, 2016
• Sakar A. Sadiq, Arezh S. Muhmed, Hozan Govar K. Haris, Dastan M. Hamma, Mohanad M. Abdwllah, Hozan H. Bibani, Hamza K. Muhealddin, Hawkar A. Mustafa, Varoujan Sissakian, Nadhir Al-Ansari
• Citations: 7 (Details)

• Flood Hazards in Erbil City Kurdistan Region Iraq, 2021: A Case Study, Engineering, Vol.14 No.12, 2022
• Varoujan K. Sissakian, Nadhir Al-Ansari, Nasrat Adamo, Iyda D. Abdul Ahad, Salwan A. Abed
• Citations: 7 (Details)

• Trust Assessment Model Based on a Zero Trust Strategy in a Community Cloud Environment, Engineering, Vol.14 No.11, 2022
• Rodrigue N’goran, Jean-Louis Tetchueng, Ghislain Pandry, Yvon Kermarrec, Olivier Asseu
• Citations: 6 (Details)

• Flexural Behaviour of Reinforced Baked Clay Beams, Engineering, Vol.8 No.7, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 6 (Details)

• Characterization of Flow Structures Induced by Highly Rough Surface Using Particle Image Velocimetry, Proper Orthogonal Decomposition and Velocity Correlations, Engineering, Vol.10 No.7, 2018
• L. R. Andersson, I. A. S. Larsson, J. G. I. Hellström, P. Andreasson, A. G. Andersson, T. S. Lundström
• Citations: 6 (Details)

• Applying Prim’s Algorithm to Identify Isolated Areas for Natural Disaster Prevention and Protection, Engineering, Vol.10 No.7, 2018
• Wen-Ching Wang, Ming-Che Hsieh, Chun-Hsiang Huang
• Citations: 6 (Details)

• Elicitation of Association Rules from Information on Customs Offences on the Basis of Frequent Motives, Engineering, Vol.10 No.9, 2018
• Bi Bolou Zehero, Etienne Soro, Yake Gondo, Pacôme Brou, Olivier Asseu, Daniel Bourget
• Citations: 6 (Details)

• Effects of Inter-Particle Frictional Coefficients on Evolution of Contact Networks in Landslide Process, Engineering, Vol.9 No.11, 2017
• Lian Jiang, Enlong Liu, Jianqiu Tian, Xiaoqiong Jiang
• Citations: 6 (Details)

• Analysis of Stress Backlogs during Case-File Processing in Forensic Science Laboratory, Engineering, Vol.9 No.12, 2017
• Gloria Cuthbert Omari, Samwel Victor Manyele, George Mwaluko
• Citations: 6 (Details)

• Kicks Controlling Techniques Efficiency in Term of Time, Engineering, Vol.9 No.5, 2017
• Ali K. Darwesh, Thorkild Maack Rasmussen, Nadhir Al-Ansari
• Citations: 6 (Details)

• Study on the Dynamic Characteristics of Light Steel Residential Structural System, Engineering, Vol.9 No.6, 2017
• Wenwei Yang, Qili Yang
• Citations: 6 (Details)

• The Influences of the Nozzle Throat Length and the Orifice Grooving Degree on Internal Flow Field for a Multi-Entry Fan Nozzle Based on FLUENT, Engineering, Vol.11 No.11, 2019
• Wei Deng, Ruirui Zhang, Gang Xu, Longlong Li, Qin Tang, Min Xu
• Citations: 6 (Details)

• Practical Study for the Effect of Speed, Direction of Acceleration and Type of Machine on Vibrations Transferred to the Steering Wheel Horticulture Tractor Type (Goldoni), Engineering, Vol.11 No.1, 2019
• Ghazwan Ahmed Dahham, Saad Tawfik Muhamed, Shamel Mohammed Saleh
• Citations: 6 (Details)

• Roadside Vertical Axis Wind Turbine (VAWT): An Effective Evolutionary Design for Australian Highway Commuters with Minimum Dynamic Stall, Engineering, Vol.12 No.9, 2020
• Assies Ahmad, Adil Loya, Muhammad Ali, Ammar Iqbal, Faiq Masood Baig, Abdul Manan Afzal
• Citations: 6 (Details)

• Water Runoff Estimation Using Geographical Information System (GIS) for Alrakhmah Basin Valley Northeast of Iraq, Engineering, Vol.12 No.6, 2020
• Abdulrazaq K. Abdulwahd, Mohammed Ch. Liejy, Mohanad A. Sulaiman, Nadhir Al-Ansari
• Citations: 6 (Details)

• DNA Circuit System and Charge Transfer Mechanism, Engineering, Vol.5 No.10B, 2013
• Kunming Xu
• Citations: 6 (Details)

• Analysis of the Cause for the Collapse of a Temporary Bridge Using Numerical Simulation, Engineering, Vol.5 No.12, 2013
• Changsung Kim, Jongtae Kim, Joongu Kang
• Citations: 6 (Details)

• Molecular Characterization, 3D Modeling of Grass Carp Interleukin-10 Receptor 1 (IL10R1), Engineering, Vol.5 No.10B, 2013
• He Wei, Shangnian Wang, Lei Qin, Xinyan Wang, Hong Zhou
• Citations: 6 (Details)

• Multi-Layer Microbubbles by Microfluidics, Engineering, Vol.5 No.10B, 2013
• Hongbo Zhang, Haosu Meng, Qian Sun, Jianpu Liu, W. J. Zhang
• Citations: 6 (Details)

• Cardiovascular Diseases Detecting via Pulse Analysis, Engineering, Vol.5 No.10B, 2013
• Jingjing Xia, Simon Liao
• Citations: 6 (Details)

• Functional Acrylic Polymer as Corrosion Inhibitor of Carbon Steel in Autoclaved Air-Foamed Sodium Silicate-Activated Calcium Aluminate/Class F Fly Ash Cement, Engineering, Vol.5 No.11, 2013
• Toshifumi Sugama, Tatiana Pyatina
• Citations: 6 (Details)

• Treatment Principles of Obesity with Chinese Herbal Medicine: Literature Analysis by Text Mining, Engineering, Vol.5 No.10B, 2013
• Yunyu Huang, Lianjie Wang, Shidong Wang, Feng Cai, Guang Zheng, Aiping Lu, Xiuchen Yu, Miao Jiang
• Citations: 6 (Details)

• Monitoring of Lactic Fermentation with a Coupling Electronic Nose and Gas Chromatography, Engineering, Vol.5 No.9A, 2013
• Montserrat Calderon-Santoyo, Pedro Ulises Bautista-Rosales, Guadalupe Luna-Solano, Charles Ghommidh, Juan Arturo Ragazzo-Sanchez
• Citations: 6 (Details)

• Maintenance Scheduling of Distribution System with Optimal Economy and Reliability, Engineering, Vol.5 No.9B, 2013
• Siyuan Hong, Haifeng Li, Fengjiao Wang
• Citations: 6 (Details)

• Optimal Aggregate Production Plans via a Constrained LQG Model, Engineering, Vol.6 No.12, 2014
• Oscar S. Silva Filho
• Citations: 6 (Details)

• Correction of the Production Master Plan According to Preventive Maintenance Constraints and Equipments Degradation State, Engineering, Vol.6 No.6, 2014
• Mostapha El Jai, Iatimad Akhrif, Brahim Herrou, Hussain Benazza
• Citations: 6 (Details)

• The Myth of the High-Efficiency External-Combustion Stirling Engine, Engineering, Vol.7 No.12, 2015
• Paul H. Riley
• Citations: 6 (Details)

• Analysis of Temperature Profiles and Cycle Time in a Large-Scale Medical Waste Incinerator, Engineering, Vol.7 No.10, 2015
• Veilla E. Matee, Samwel V. Manyele
• Citations: 6 (Details)

• Research on Single-Side Long Edge of Hot Rolled Strip Caused by Asymmetrical Stiffness of Mill Stand, Engineering, Vol.3 No.9, 2011
• Dian-Yao Gong, Jian-Zhong Xu, Dian-Hua Zhang, Zhong-Feng Guo, Cui-Ying Yang
• Citations: 6 (Details)

• Productivity Improvement Model without Increasing Operation’s Risk and Fatigue, Engineering, Vol.3 No.11, 2011
• Adel Al-Shayea, Khalid Al-Saleh, Khalid Al-Yami, Abdulaziz El-Tamimi
• Citations: 6 (Details)

• Gold Recovery from Gold Bearing Materials Using Bio-Diesel, Vegetable Oils and Coal, Engineering, Vol.3 No.5, 2011
• Anderson Mlaki, Jamidu Katima, Henry Kimweri
• Citations: 6 (Details)

• Time-Frequency Entropy Analysis of Arc Signal in Non-Stationary Submerged Arc Welding, Engineering, Vol.3 No.2, 2011
• Kuanfang He, Siwen Xiao, Jigang Wu, Guanbin Wang
• Citations: 6 (Details)

• Heat Source Analysis of Hard Disk Drives with Different Wall Conditions using Infrared System, Engineering, Vol.3 No.1, 2011
• Eddie Yin-Kwee Ng, Wan Kee Ng, Shaoyong Liu
• Citations: 6 (Details)

• Preparation of Mono-Dispersed Carbon Nanotubes (CNTs) with Dodecyl Itaconate and Its Utilization in Paper-Making, Engineering, Vol.3 No.1, 2011
• Xiao-Shui Wang
• Citations: 6 (Details)

• Regression Models of the Impact of Rockmass and Blast Design Variations on the Effectiveness of Iron Ore Surface Blasting, Engineering, Vol.3 No.1, 2011
• Antipas Thadei Safari Massawe, Karim Rajabu Baruti
• Citations: 6 (Details)

• Performance Analysis of Automated Control System for Condenser Water Treatment Unit, Engineering, Vol.4 No.1, 2012
• Abdulmajeed Saeed Al-Ghamdi
• Citations: 6 (Details)

• Stress Concentrations for Slotted Plates in Bi-Axial Stress, Engineering, Vol.4 No.2, 2012
• D. W. A. Rees, Bahai, S. Taylor
• Citations: 6 (Details)

• Development of Large-Scale Land Information System (LIS) by Using Geographic Information System (GIS) and Field Surveying, Engineering, Vol.4 No.2, 2012
• Asma Th. Ibraheem
• Citations: 6 (Details)

• On the Wear Behavior of Cyanoacrylate in Presence of Nano-Sized SiO₂, Engineering, Vol.4 No.5, 2012
• Amir Yaghmaei, Seyed Mojtaba Zebarjad, Mehrdad Kashefi
• Citations: 6 (Details)

• Direct Calculation of Unsteady-State Weymouth Equations for Gas Volumetric Flow Rate with Different Friction Factors in Horizontal and Inclined Pipes, Engineering, Vol.4 No.4, 2012
• Abayomi O. Olatunde, Tunde A. Adeosun, Mohammed A. Usman, Olabisi M. Odunlami, Moses A. Olowofoyeku, Testy E. Ekakitie, Atanda M. Mohammed
• Citations: 6 (Details)

• Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel, Engineering, Vol.4 No.9, 2012
• Petra Kersting, Dirk Biermann, Eugen Krebs
• Citations: 6 (Details)

• An Ancient Rangefinder for Teaching Surveying Methods, Engineering, Vol.4 No.9, 2012
• Amelia Carolina Sparavigna
• Citations: 6 (Details)

• Hydrodynamics of the Pilot Scale Wet Scrubber with Restricted Outlet Absorbent Flow Rate, Engineering, Vol.4 No.7, 2012
• Samwel Victor Manyele
• Citations: 6 (Details)

• Study of the Process of Extraction and Refining of Pequi (Caryocar brasiliense Camb.) Oil, Engineering, Vol.5 No.1, 2013
• Pierre C. Martins, Leisyanne O. Ferreira, Thamires S. Peixoto
• Citations: 6 (Details)

• Shear Stress Variation at Scour Hole of Circular Pier, Engineering, Vol.4 No.11, 2012
• Joongu Kang, Hongkoo Yeo
• Citations: 6 (Details)

• Development of an Efficient Tapered Slip-Form System Applying BIM Technology, Engineering, Vol.5 No.9, 2013
• Hyejin Yoon, Won Jong Chin, Hee Seok Kim, Young Jin Kim
• Citations: 6 (Details)

• Development of Highly Efficient Construction Technologies for Super Long Span Bridge, Engineering, Vol.5 No.8, 2013
• Hee Seok Kim, Young Jin Kim, Won Jong Chin, Hyejin Yoon
• Citations: 6 (Details)

• Comparison of Measured and Dynamic Analysis Vertical Accelerations of High-Speed Railway Bridges Crossed by KTX Train, Engineering, Vol.5 No.9, 2013
• Hyejin Yoon, Won Jong Chin, Jeong-Rae Cho, Jae Yoon Kang, Jongwon Kwark
• Citations: 6 (Details)

• Comparison of ANN and SVM to Identify Children Handwriting Difficulties, Engineering, Vol.5 No.5B, 2013
• Anith Adibah Hasseim, Rubita Sudirman, Puspa Inayat Khalid, Narges Tabatabaey-Mashadi
• Citations: 6 (Details)

• Gear Drive Mechanism for Continuous Variable Valve Timing of IC Engines, Engineering, Vol.5 No.3, 2013
• Osama H. M. Ghazal, Mohamad S. H. Dado
• Citations: 6 (Details)

• Finite Element Analysis of In-Plane Displacements and Von-Mises Stresses in Ellipsoidal and Circular Cylinderical Petroleum Tankers, Engineering, Vol.5 No.2, 2013
• Oluleke Oluwole, Eyere Emagbetere
• Citations: 6 (Details)

• Increase Ultrasonics Cleaning Efficiency of Electronics Modules, Engineering, Vol.5 No.2, 2013
• Vladimir L. Lanin, Vladimir S. Tomal
• Citations: 6 (Details)

• A Comparison of Pinch Force between Finger and Palm Grasp techniques in Laparoscopic Grasping, Engineering, Vol.4 No.10B, 2012
• Susmitha Wils K, George Mathew, M. Manivannan, Suresh R Devasahayam
• Citations: 6 (Details)

• A mathematical Model to Predict Transition-to-Fatigue During Isometric Exercise on Muscles of the Lower Extremities, Engineering, Vol.4 No.10B, 2012
• Jorge Garza-Ulloa, Huiying Yu, T. Sarkodie- Gyan, Pablo Rangel, Olatunde Adeoye, Noe Vargas Hernandez
• Citations: 6 (Details)

• Rapid Determination of Sexually Transmitted Infections by Real-time Polymerase Chain Reaction Using Microchip Analyzer, Engineering, Vol.4 No.10B, 2012
• O. Suvorova, A. Perchik, M. Slyadnev, O. Suvorova, A. Perchik, M. Slyadnev, D. Navolotskii, N. Mushnikov
• Citations: 5 (Details)

• The Modification of Poly amidoamine (PAMAM-G0.5) by Cytosine, Engineering, Vol.4 No.10B, 2012
• Omid Louie, Abdolhossien Massoudi, Hooshang Vahedi, Hajar Asadi, Sami Sajjadifar
• Citations: 5 (Details)

• Design of Heat Storage for a Solar Concentrator Driving an Absorption Chiller, Engineering, Vol.5 No.1A, 2013
• M. A. Serag-Eldin
• Citations: 5 (Details)

• Conjugation of the Recombinant Third Domain of Human Alpha-fetoprotein with Doxorubicin Using Poly(amidoamine) Dendrimers and Study of Its Cytotoxic Activity, Engineering, Vol.4 No.10B, 2012
• S. I. Kisil, V. A. Chernikov, M. I. Danilevskiy, L. V. Savvateeva, N. V. Gorokhovets
• Citations: 5 (Details)

• Noise Source Identification Applied in Electric Power Industry Using Microphone Arrays, Engineering, Vol.5 No.1B, 2013
• Pengxiao Teng, Rilin Chen, Yichun Yang
• Citations: 5 (Details)

• Motion Classification Using Proposed Principle Component Analysis Hybrid K-Means Clustering, Engineering, Vol.5 No.5B, 2013
• Ching Yee Yong, Rubita Sudirman, Nasrul Humaimi Mahmood, Kim Mey Chew
• Citations: 5 (Details)

• A Boundary Integral Formulation of the Plane Problem of Magneto-Elasticity for an Infinite Cylinder in a Transverse Magnetic Field, Engineering, Vol.5 No.4, 2013
• Moustafa Saber Abou-Dina, Ahmed Fouad Ghaleb
• Citations: 5 (Details)

• Inexpensive Pipelines Health Evaluation Techniques Based on Resonance Determination, Numerical Simulation and Experimental Testing, Engineering, Vol.5 No.4, 2013
• Waheed Sami Abushanab
• Citations: 5 (Details)

• Optimal Inventory Policy of Production Management: A Present Value Framework, Engineering, Vol.5 No.6, 2013
• Li-Fen Chang, Shou-Mei Su, Shy-Der Lin
• Citations: 5 (Details)

• Assessment of Habitats according to Groyne Types (Using Pale Chub), Engineering, Vol.5 No.1, 2013
• Joongu Kang, Hongkoo Yeo, Changsung Kim
• Citations: 5 (Details)

• Randomized Integral Gain of Pi Current Controller for A Single Pv Inverter System, Engineering, Vol.5 No.1B, 2013
• Suriana Salimin, Matthew Armstrong, Bashar Zahawi
• Citations: 5 (Details)

• Measuring the Thermal Diffusivity in a Student Laboratory, Engineering, Vol.4 No.5, 2012
• Amelia Carolina Sparavigna
• Citations: 5 (Details)

• Investigation of Self Excited Torsional Vibrations of Different Configurations of Automatic Transmission Systems during Engagement, Engineering, Vol.3 No.12, 2011
• Eid O. A. Abd Elmaksoud, E M. Rabeih, N A Abdel-halim, S M. El Demerdash
• Citations: 5 (Details)

• The Effect of the Pressure for the Formation of YBa2Cu3O7–d Bulk Ceramics with Domestic Microwave Oven, Engineering, Vol.3 No.11, 2011
• Masato Ohmukai
• Citations: 5 (Details)

• Fuzzy Approach to the Selection of Material Data in Concurrent Engineering Environment, Engineering, Vol.3 No.9, 2011
• Adavi Balakrishna, G. Ravi Chandra, Balakrishna Gogulamudi, Chinta Someswararao
• Citations: 5 (Details)

• Comparative Study on Application of Bimetallic Pt-Based Alloy Electrocatalysts in Advanced Chlor-Alkali Electrolysis, Engineering, Vol.3 No.8, 2011
• F Farzami, E Joudaki, S. J Hashemi
• Citations: 5 (Details)

• Microscopic Observation of Nuclear Track Pores in Polymeric Membranes, Engineering, Vol.3 No.6, 2011
• Naveen K. Acharya
• Citations: 5 (Details)

• Utilization of Egyptian Ilmenite Ore for Steel Surface Preparation in Petroleum Field, Engineering, Vol.3 No.8, 2011
• Mahmoud Ibrahim Abdou, Mohamed Abd EL-Fattah Moustafa, Hany El- Sayed Ahmed, Hamada Abd El-Wahab
• Citations: 5 (Details)

• Finite Deformation and Viscoelasticity Modeling and Test, Engineering, Vol.3 No.8, 2011
• Tibi Beda, Yvon Chevalier, Kokou-Esso Atcholi, Essole Padayodi, Jean-Claude Sagot
• Citations: 5 (Details)

• Fractional Sampling Improves Performance of UMTS Code Acquisition, Engineering, Vol.1 No.1, 2009
• Francesco Benedetto, Gaetano Giunta
• Citations: 5 (Details)

• Corrosion Behavior of Laser Remelted CoNiCrAlY Based Composite Coatings, Engineering, Vol.2 No.5, 2010
• Dragos Utu, Gabriela Marginean, Viorel-Aurel Serban, Cosmin Codrean
• Citations: 5 (Details)

• Hydraulic Domestic Heating by Throttling, Engineering, Vol.2 No.6, 2010
• Mohammad A. K. Alia, Tariq Younes, Hussein Sarhan
• Citations: 5 (Details)

• Hydrogen Pick up in Zircaloy-4: Effects in the Dimensional Stability of Structural Components under Nuclear Reactor Operating Conditions, Engineering, Vol.2 No.8, 2010
• Pablo Vizcaíno, Cintia Paola Fagundez, Abraham David Banchik
• Citations: 5 (Details)

• Effect of Environmental Conditions on Tin (Sn) Whisker Growth, Engineering, Vol.7 No.12, 2015
• Heshmat A. Aglan, Kaushal R. Prayakarao, Md. Karim Rahman, David V. Burdick
• Citations: 5 (Details)

• Non-Invasive Second Harmonic Generation (SHG) in Macroscopy (MacroSHG) as Bio-Diagnosis to Image Collagen Network Organization in Extracellular Matrix, Engineering, Vol.6 No.8, 2014
• Dominique Dumas, Elisabeth Werkmeister, Sebastien Hupont, Céline Huselstein, Natalia De Isla, Marthe Rousseau, Patrick Menu, Didier Mainard
• Citations: 5 (Details)

• A New Approach with Three Dimension Figure and ANSI/IEEE C57.104 Standard Rule Diagnoses Transformer’s Insulating Oil, Engineering, Vol.6 No.12, 2014
• Ming-Jong Lin
• Citations: 5 (Details)

• Design, Implementation and Simulation of Non-Intrusive Sensor for On-Line Condition Monitoring of MV Electrical Components, Engineering, Vol.6 No.11, 2014
• Muhammad Shafiq, Matti Lehtonen, Lauri Kutt, Muzamir Isa
• Citations: 5 (Details)

• Similarity and Comparison of the Electrodynamics Characteristics of Switched Reluctance Motors SRM with Those of Series DC Motors, Engineering, Vol.7 No.1, 2015
• Abdelmajid Berdai, Abdelaziz Belfqih, Jamal Boukherouaa, Faissal El Mariami, Abdelhamid Hmidat, Vladimir Vlasenko, Valery Titjuk
• Citations: 5 (Details)

• Quantifying Rooftop Rainwater Harvest Potential: Case of Mbeya University of Science and Technology in Mbeya Tanzania, Engineering, Vol.5 No.10, 2013
• Zacharia Katambara
• Citations: 5 (Details)

• Analytical Study of the Cable-Truss Systems on the Glass Certain Walls with Vertical Uses, Engineering, Vol.5 No.10, 2013
• Yasemin Mesda
• Citations: 5 (Details)

• The Reliability Evaluation Method Study of Power System Communication Networks in Case of Ice Storm, Engineering, Vol.5 No.9B, 2013
• Jianghua Yang, Huan Teng, Chonggu Yao, Nian Liu, Bin Sun, Hanyun Yuan, Ming Liu, Jialin Bai
• Citations: 5 (Details)

• Mean Threshold and ARNN Algorithms for Identification of Eye Commands in an EEG-Controlled Wheelchair, Engineering, Vol.5 No.10B, 2013
• Nguyen Thanh Hai, Nguyen Van Trung, Vo Van Toi
• Citations: 5 (Details)

• Fatigue Life Analysis of Fixed Structure of Posterior Thoracolumbar Pedicle Screw, Engineering, Vol.5 No.10B, 2013
• Tong Yang, Kai Chen, Yonggui Lv
• Citations: 5 (Details)

• Production of Hydrogen from Aqueous Phase Reforming of Glycerol: Economic Evaluation, Engineering, Vol.6 No.1, 2014
• Rodolfo Salazar Pérez, Mariana M. V. M. Souza, Neyda C. Om Tapanes, Gisel Chenard Diaz, Donato A. G. Aranda
• Citations: 5 (Details)

• Gynecological Surgery and the Robot, Engineering, Vol.6 No.2, 2014
• O. E. O’Sullivan, B. A. O’Reilly
• Citations: 5 (Details)

• A Study on the Characteristics and the Effective Reduction Methods for the Ground Vibration Due to the Travelling Tilting Train, Engineering, Vol.6 No.4, 2014
• Hee Seok Kim
• Citations: 5 (Details)

• Construction of a Shuttle Vector for Heterologous Gene Expression in Escherichia coli and Microalgae Anabaena, Engineering, Vol.5 No.10B, 2013
• Donghui Song, Jing Li, Xiaoxu Hu, Bo Xi
• Citations: 5 (Details)

• Automatic Assessment of Expanded Disability Status Scale (EDSS) in Multiple Sclerosis Using a Decision Tree, Engineering, Vol.5 No.10B, 2013
• Hua Cao, Olivier Agnani, Laurent Peyrodie, Cécile Donzé
• Citations: 5 (Details)

• Study on Paths of Affect Factors on Adaption to University Life of Chinese International Students in Korea —Choosing Korean Training Chinese Students as Main Investigation Objects, Engineering, Vol.5 No.10B, 2013
• Qinlan Lin, Ling Gao
• Citations: 5 (Details)

• Calculation of Surrounding Rock Pressure of Undercut Subway Station Based on Multi-Factor Affecting Pressure Arch Theory, Engineering, Vol.12 No.2, 2020
• Bin Shang, Xiaoguang Jin, Guiyong Ao, Qiao Chen, Qiong Qiu
• Citations: 5 (Details)

• Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them, Engineering, Vol.12 No.10, 2020
• Akmal Umarov, Kamola Ortikova, Akramjon Sarimsakov
• Citations: 5 (Details)

• From Usability to Pleasure: A Case Study of Difference in Users’ Preference, Engineering, Vol.13 No.8, 2021
• Wei Bi, Yanru Lyu, Jing Cao, Rungtai Lin
• Citations: 5 (Details)

• Analytical Load Balancing Model in Distributed Open Flow Controller System, Engineering, Vol.10 No.12, 2018
• Traoré Issa, Zamblé Raoul, Adama Konaté, Joël Christian Adepo, Bernard Cousin, Asseu Olivier
• Citations: 5 (Details)

• Behavior of Repairing Composite I-Section Beams with Opening under Ultimate Torque, Engineering, Vol.10 No.4, 2018
• Ali Sabah Ahmed Al Amli, Nadhir Al-Ansari, Yaarub G. Abtan
• Citations: 5 (Details)

• Finite Element Modelling of Car Seat with Hyperelastic and Viscoelastic Foam Material Properties to Assess Vertical Vibration in Terms of Acceleration, Engineering, Vol.12 No.3, 2020
• Purnendu Mondal, Subramaniam Arunachalam
• Citations: 5 (Details)

• Thermal Manikin of Infant, Engineering, Vol.11 No.11, 2019
• Yoshihito Kurazumi, Tomonori Sakoi, Ken Yamashita, Kenta Fukagawa, Emi Kondo, Tadahiro Tsuchikawa
• Citations: 5 (Details)

• Landfill Sitting by Two Methods in Al-Qasim, Babylon, Iraq and Comparing Them Using Change Detection Method, Engineering, Vol.9 No.8, 2017
• Ali Chabuk, Nadhir Al-Ansari, Hussain Musa Hussain, Sven Knutsson, Roland Pusch, Jan Laue
• Citations: 5 (Details)

• New Use of Mn-Zn Ferrite Material in Power Electronics Integrated LC Filters, Engineering, Vol.9 No.12, 2017
• Somo Coulibaly, David Malec, Vincent Bley, Dominique Mary, Benoît Schlegel
• Citations: 5 (Details)

• Turbulence Modelling of a Single-Phase Flow Cyclone Gasifier, Engineering, Vol.9 No.9, 2017
• Pantea Hadi Jafari, J. Gunnar I. Hellström, B. Rikard Gebart
• Citations: 5 (Details)

• Thermal Decomposition of Printed Circuit Board in the Presence of Zinc Oxide under Inert and Oxidative Atmosphere: Emission Behavior of Inorganic Brominated Compounds, Engineering, Vol.10 No.9, 2018
• Osamu Terakado, Shunsuke Kuzuhara, Hironori Takagi, Masahiro Hirasawa
• Citations: 5 (Details)

• Effect of Inoculation on Phase Formation and Indentation Hardness Behaviour of Zr_47.5Cu_45.5Al₅Co₂ and Zr₆₅Cu₁₅Al₁₀Ni₁₀ Bulk Metallic Glass Matrix Composites, Engineering, Vol.10 No.8, 2018
• Muhammad Musaddique Ali Rafique
• Citations: 5 (Details)

• Analysis of Small Oscillations in Complex Electric Power Systems, Engineering, Vol.10 No.5, 2018
• Allaev Kaxramon Raximovich, Makhmudov Tokhir Farkhadovich
• Citations: 5 (Details)

• Model-Based Assessment of Climate Change Impact on Isaac River Catchment, Queensland, Engineering, Vol.8 No.7, 2016
• Nahlah Abbas, Saleh A. Wasimi, Nadhir Al-Ansari
• Citations: 5 (Details)

• The Summary of the Research on the Compound Braking Strategy of Four Wheel Hub Motor Drive Electric Vehicle, Engineering, Vol.8 No.7, 2016
• Peiteng Zhao, Huanhuan Zhang, Bo Peng
• Citations: 5 (Details)

• Application of 3D Electrical Resistivity Tomography for Diagnosing Leakage in Earth Rock-Fill Dam, Engineering, Vol.8 No.5, 2016
• Xin Zhang, Mingjie Zhao, Kui Wang, Pan Liu, Huan Liu
• Citations: 5 (Details)

• Simple Adaptive Delta Operator Aircraft Flight Control for Accommodation of Loss of Control Effectiveness, Engineering, Vol.8 No.4, 2016
• Alfredo Cano, Kenneth Sobel
• Citations: 5 (Details)

• Research on the Stability Control Strategy of Four-Wheel Independent Driving Electric Vehicle, Engineering, Vol.9 No.3, 2017
• Bo Peng, Huanhuan Zhang, Peiteng Zhao
• Citations: 5 (Details)

• Modeling and Simulation of Hydraulic Hammer for Sleeve Valve, Engineering, Vol.8 No.9, 2016
• Zishan Xu, Guoping Yang
• Citations: 5 (Details)

• Reliability Design of Ice-Maker System Subjected to Repetitive Loading, Engineering, Vol.8 No.9, 2016
• Seong-Woo Woo
• Citations: 5 (Details)

• A New Hybrid Order Approach to Morphological Color Image Processing Based on Reduced Order with Adaptive Absolute Reference, Engineering, Vol.8 No.9, 2016
• S. Ouattara, A. Kouassi, J. C. Okaingni, A. Koffi, G. Loum, A. Clement
• Citations: 5 (Details)

• Determination of the Friction Coefficient in the Flat Strip Drawing Test, Engineering, Vol.13 No.11, 2021
• Anvar Makhkamov
• Citations: 5 (Details)

• Methods for Reducing Seed Damage in the Technological Process of Cotton Processing, Engineering, Vol.14 No.3, 2022
• Muradov Rustam, Isakhanov Khamidullo, Khosimov Khusanboy
• Citations: 5 (Details)

• Influence of the Mode of Discrete Drum Speed and the Number of Inputs on the Technological Parameters of the Yarn Produced, Engineering, Vol.14 No.12, 2022
• Yuldashev Jamshid
• Citations: 4 (Details)

• The Severe Consequences of Climate Change in Iraq: A Case Study, Engineering, Vol.15 No.4, 2023
• Varoujan K. Sissakian, Nasrat Adamo, Nadhir Al-Ansari
• Citations: 4 (Details)

• Perception-Based Assessment of the Factors Causing Delays in Construction Projects, Engineering, Vol.15 No.7, 2023
• Om Prakash Giri
• Citations: 4 (Details)

• Mosul Dam: A Catastrophe Yet to Unfold, Engineering, Vol.9 No.3, 2017
• Nasrat Adamo, Nadhir Al-Ansari, Sven Knutsson, Jan Laue, Varoujan Sissakian
• Citations: 4 (Details)

• Seepage Velocity of Dibdibba Formation in Karbala, Iraq, Engineering, Vol.9 No.3, 2017
• Qais Al-Madhlom, Nadhir Al-Ansari, Hussain M. Hussain, Jenny Lindblom, Twana Abdullah, Bashar Abid Hamza, Sven Knutsson
• Citations: 4 (Details)

• Impact of Reservoir Properties on the Production of the Mannville Coal Measures, South Central Alberta from a Numerical Modelling Parametric Analysis, Engineering, Vol.9 No.3, 2017
• Amanda M. M. Bustin, Robert Marc Bustin
• Citations: 4 (Details)

• Comparison of Compressive and Tensile Strength of Baked Clay with Those of Normal Concrete, Engineering, Vol.8 No.6, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 4 (Details)

• The Analysis and Comparison of All Kinds of Buried Pipeline Model Based on Seismic Effect, Engineering, Vol.8 No.6, 2016
• Xiaoli Li, Jing Sun, Tinghui Li
• Citations: 4 (Details)

• Relation between Compressive Strength of Baked Clay Cubes and Cylinders, Engineering, Vol.8 No.8, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 4 (Details)

• On the Bump Tests of Cracked Shafts Using Acoustic Emission Techniques, Engineering, Vol.8 No.9, 2016
• Gilberto Luiz S. Pimentel-Junior, Frederico B. Oliveira, Marco Tulio C. Faria
• Citations: 4 (Details)

• Enhancing the Creep Resistance of Sn-9.0Zn-0.5Al Lead-Free Solder Alloy by Small Additions of Sb Element, Engineering, Vol.10 No.1, 2018
• E. A. Eid, Manal A. Ramadan, A. B. El Basaty
• Citations: 4 (Details)

• Prediction and Diversion Mechanisms for Crowd Management Based on Risk Rating, Engineering, Vol.9 No.5, 2017
• Meihua Zhang, Yuan Yao, Kefan Xie
• Citations: 4 (Details)

• An Experimental Study on the Dissipation Effect of a Baffle Downstream of a Weir, Engineering, Vol.9 No.11, 2017
• Joon-Gu Kang
• Citations: 4 (Details)

• Effects of Outdoor Thermal Environment upon the Human Responses, Engineering, Vol.11 No.8, 2019
• Yoshihito Kurazumi, Emi Kondo, Kenta Fukagawa, Yoshiaki Yamato, Kunihito Tobita, Tadahiro Tsuchikawa
• Citations: 4 (Details)

• Electricity Is Not What You Think, Engineering, Vol.11 No.12, 2019
• Michael Bank
• Citations: 4 (Details)

• Design of Experiment (DoE): Implementation in Determining Optimum Design Parameters of Portable Workstation, Engineering, Vol.12 No.1, 2020
• Nafisa Ali Anika, Nadia Tanzeem, Himadri Sen Gupta
• Citations: 4 (Details)

• Factors Influencing Technology Transfer for Sustainable Construction Management in Nigeria, Engineering, Vol.10 No.11, 2018
• Iroegbu Udochukwu Frank, Rong Du
• Citations: 4 (Details)

• The Implementation and Lateral Control Optimization of a UAV Based on Phase Lead Compensator and Signal Constraint Controller, Engineering, Vol.10 No.10, 2018
• Adil Loya, Muhammad Duraid, Kamran Maqsood, Rehan Rasheed Khan
• Citations: 4 (Details)

• Assessment of Growth and Productivity on Four Black Pepper Varieties (Piper nigrum L.) in Three Target Provinces of Vietnam, Engineering, Vol.13 No.12, 2021
• Duong Thi Oanh, Nguyen Van Long, Nguyen Quang Ngoc, Tran Thi Dieu Hien, Pham Thi Hoai, Nguyen Ba Huy
• Citations: 4 (Details)

• Deficient Developmental Planning Leading to Water Conflicts across Political Borders: The Way Forward, Engineering, Vol.13 No.3, 2021
• Elias Salameh, Nadhir Al-Ansari
• Citations: 4 (Details)

• Determining Optimum Design Parameters of Foldable Product Using Response Surface Methodology and Genetic Algorithm, Engineering, Vol.12 No.11, 2020
• Shahriar Tanvir Alam, Mohd Albab Amin
• Citations: 4 (Details)

• One Wire Is always Better, Engineering, Vol.13 No.6, 2021
• Michael Bank, Vladimir Tsingauz
• Citations: 4 (Details)

• Clothing Thermal Insulation for Typical Seasonal Clothing of Infant with Infant Thermal Manikin, Engineering, Vol.13 No.7, 2021
• Yoshihito Kurazumi, Kenta Fukagawa, Tomonori Sakoi, Akie Naito, Motoe Imai, Reiko Hashimoto, Emi Kondo, Tadahiro Tsuchikawa
• Citations: 4 (Details)

• Magnitude and Direction of Groundwater Seepage Velocity in Different Soil and Rock Materials, Engineering, Vol.12 No.4, 2020
• Twana O. Abdullah, Salahalddin S. Ali, Nadhir A. Al-Ansari, Sven Knutsson, Jan Laue
• Citations: 4 (Details)

• An Adaptive Pulse Compression Filter for Ultrasound Contrast Harmonic Imaging, Engineering, Vol.5 No.10B, 2013
• Jenho Tsao, Ming-Huang Chen
• Citations: 4 (Details)

• Design and Implementation of Clinic Appointment Registration System, Engineering, Vol.5 No.10B, 2013
• Xiuju Zhan, Xiufeng Liu
• Citations: 4 (Details)

• Contour Extraction of Skin Tumors Using Visual Attention and GVF-Snake Model, Engineering, Vol.5 No.10B, 2013
• Li Ma, Tianzhen Su
• Citations: 4 (Details)

• Neural Model-Based Self-Tuning PID Strategy Applied to PEMFC, Engineering, Vol.6 No.4, 2014
• Cédric Damour, Michel Benne, Brigitte Grondin-Perez, Jean-Pierre Chabriat
• Citations: 4 (Details)

• Turn Control of a Three-Dimensional Quasi-Passive Walking Robot by Utilizing a Mechanical Oscillator, Engineering, Vol.6 No.2, 2014
• Ying Cao, Soichiro Suzuki, Yohei Hoshino
• Citations: 4 (Details)

• Distributed Generation Effects on Large-Scale Distribution Networks, Engineering, Vol.6 No.1, 2014
• Anastasia S. Safigianni, George N. Koutroumpezis, Anastasios I. Spyridopoulos
• Citations: 4 (Details)

• Relationship Research between the Chinese Medicine Constitution and Sub-Health, Engineering, Vol.5 No.10B, 2013
• Xiufeng Liu, Bo Xu, Zhenhu Chen
• Citations: 4 (Details)

• Splitting of Gaussian Models via Adapted BML Method Pertaining to Cry-Based Diagnostic System, Engineering, Vol.5 No.10B, 2013
• Hesam Farsaie Alaie, Chakib Tadj
• Citations: 4 (Details)

• Positive-Negative Emotional Categorization of Clothing Color Based on Brightness, Engineering, Vol.5 No.10B, 2013
• Xiao-Feng Jiang, Xiao-Pei Bian
• Citations: 4 (Details)

• High-Impedance Bus Differential Protection Modeling in ATP/MODELS, Engineering, Vol.5 No.9B, 2013
• Mardênnia T. S. Alvarenga, Priscila L. Vianna, Kleber M. Silva
• Citations: 4 (Details)

• Construction and Application of the Multidimensional Table for Knowledge Discovery in Ancient Chinese Books on Materia Medica, Engineering, Vol.5 No.10B, 2013
• Rui Jin, Qian Lin, Jun Zhou, Boyu Sun, Bing Zhang
• Citations: 4 (Details)

• Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel, Engineering, Vol.5 No.11, 2013
• Nurudeen A. Raji, Oluleke O. Oluwole
• Citations: 4 (Details)

• Freeze-Thaw Effect on Coarse Sand Coated Interface between FRP and Concrete, Engineering, Vol.5 No.10, 2013
• Keunhee Cho, Sung Yong Park, Sung Tae Kim, Jeong-Rae Cho, Byung-Suk Kim
• Citations: 4 (Details)

• A Study on the Flexural Performance of UHPC Precast Deck-Joint Interface by the Exposure of Steel Fiber, Engineering, Vol.6 No.13, 2014
• Kilje Jung, Sung Yong Park, Sung Tae Kim, Byung-Suk Kim, Keunhee Cho
• Citations: 4 (Details)

• Comparative Study of Conventional, Fuzzy Logic and Neural PID Speed Controllers with Torque Ripple Minimization for an Axial Magnetic Flux Switched Reluctance Motor, Engineering, Vol.6 No.11, 2014
• Eric S. Sanches, José A. Santisteban
• Citations: 4 (Details)

• Intelligent Agent-Based Architecture for Demand Side Management Considering Space Heating and Electric Vehicle Load, Engineering, Vol.6 No.11, 2014
• Farhan H. Malik, Mubbashir Ali, Matti Lehtonen
• Citations: 4 (Details)

• Possibilities of Reducing Energy Consumption by Optimization of Ground Source Heat Pump Systems in Babylon, Iraq, Engineering, Vol.8 No.3, 2016
• Jenny Lindblom, Nadhir Al-Ansari, Qais Al-Madhlom
• Citations: 4 (Details)

• Survey and Field Measurement on Residential Lifestyle and Energy Use in Rural China, Engineering, Vol.7 No.10, 2015
• Didit Novianto, Akihiro Kano, Liyang Fan, Jing Wang, Meiyan Wang, Zhu Wang, Jian Ge, Yong He, Weijun Gao
• Citations: 4 (Details)

• Spread of Phytophthora capsici in Black Pepper (Piper nigrum) in Vietnam, Engineering, Vol.7 No.8, 2015
• Van Long Nguyen
• Citations: 4 (Details)

• The Detection Evaluation and Reinforcement Research of Kankan River Bridge, Engineering, Vol.7 No.7, 2015
• Juxian Liu
• Citations: 4 (Details)

• Relationship between Selected Hydrochemical Parameters in Springs of Najaf Province, Iraq, Engineering, Vol.7 No.6, 2015
• Saadi A. M. Al-Dahaan, Abdelkadhum J. Alabidi, Nadhir Al-Ansari, Sven Knutsson
• Citations: 4 (Details)

• Estimation of Settlement under Shallow Foundation for Different Regions in Iraq Using SAFE Software, Engineering, Vol.7 No.7, 2015
• Entidhar Al-Taie, Nadhir Al-Ansari, Sven Knutsson
• Citations: 4 (Details)

• Theoretical Research on R245fa Condensation Heat Transfer inside a Horizontal Tube, Engineering, Vol.7 No.5, 2015
• Shengchun Liu, Yan Huo, Zhaowei Liu, Lan Li, Jinghong Ning
• Citations: 4 (Details)

• Isotropic Elastoplasticity Fully Coupled with Non-Local Damage, Engineering, Vol.2 No.6, 2010
• M. Almansba, K. Saanouni, N. E. Hannachi
• Citations: 4 (Details)

• Determination of Strains near the Welded Seams, Engineering, Vol.2 No.12, 2010
• Boris S. Semukhin
• Citations: 4 (Details)

• Design and Modeling of Femto Air Bearing Slider, Engineering, Vol.2 No.11, 2010
• Ching F. Yong, Eddie Y. K. Ng, Wei D. Zhou, Wan K. Ng
• Citations: 4 (Details)

• Rolling Deformations and Residual Stresses of Large Circular Saw Body, Engineering, Vol.2 No.9, 2010
• Bolesław Porankiewicz, Jari Parantainen, Karolina Ostrowska
• Citations: 4 (Details)

• Time Dependent Surface Heat Transfer in Light Weight Aggregate Cement Based Materials, Engineering, Vol.2 No.5, 2010
• Hung T. Nguyen, Frank Melandso, Stefan Jacobsen
• Citations: 4 (Details)

• Study on the Law of the Movement and Damage to Slope with the Combination of Underground Mining and Open-Pit Mining, Engineering, Vol.2 No.3, 2010
• Gaofeng Ren, Xingkui Fang
• Citations: 4 (Details)

• Sliding Mode Control with Auto-Tuning Law for Maglev System, Engineering, Vol.2 No.2, 2010
• L.L. Zhang, Z.Z. Zhang, Z.Q. Long, A.M. Hao
• Citations: 4 (Details)

• A Set of Globally Stable N-PID Regulators for Robotic Manipulators, Engineering, Vol.2 No.2, 2010
• B.S. Liu, F.C Lin, B.L. Tian
• Citations: 4 (Details)

• Embedded Control of LCL Resonant Converter Analysis, Design, Simulation and Experimental Results, Engineering, Vol.1 No.1, 2009
• S. Selvaperumal, C. Christober Asir Rajan
• Citations: 4 (Details)

• Application of PPC Model Based on RAGA in Real Estate Investment Decision-Making, Engineering, Vol.1 No.2, 2009
• Shujing ZHOU, Fei WANG, Yancang LI
• Citations: 4 (Details)

• ‘Fading is Our Friend!’: A Performance Comparison of WiMAX-MIMO/MISO/SISO Communication Systems, Engineering, Vol.2 No.1, 2010
• A. ROHAN, N. DAILLY, P. KUSUMWAL
• Citations: 4 (Details)

• Solar Thermal Aquaculture System Controller Based on Artificial Neural Network, Engineering, Vol.3 No.8, 2011
• Doaa M Atia, Faten H Fahmy, Ninet M Ahmed, Hassen T Dorrah
• Citations: 4 (Details)

• Influence of the Addition of Sand and Compaction on the Mechanical and Thermal Performances of Plaster, Engineering, Vol.3 No.9, 2011
• Saida Dorbani, Fattoum Kharchi, Fatiha Salem, Karima Arroudj, Nadia Chioukh
• Citations: 4 (Details)

• Slip Line Field Solution for Second Pass in Lubricated 4-High Reversing Cold Rolling Sheet Mill, Engineering, Vol.3 No.12, 2011
• Oluleke O. Oluwole, Olayinka Olaogun
• Citations: 4 (Details)

• Two Multi-Objective Genetic Algorithms for Finding Optimum Design of an I-beam, Engineering, Vol.3 No.10, 2011
• Ali Khazaee, Hossein Miar Naimi
• Citations: 4 (Details)

• Shallow Axi-symmetric Bimetallic Shell as a Switching Element in a Non-Homogenous Temperature Field, Engineering, Vol.3 No.2, 2011
• Marko Jakomin
• Citations: 4 (Details)

• Study of Ni/Al Interface Diffusion by Molecular Dynamics Simulation, Engineering, Vol.3 No.3, 2011
• Chunguang Zhang, Hao Wang, Yishen Qiu
• Citations: 4 (Details)

• Statistical Control and Investigation of Capability of Process and Machine in Wire Cut Edm Process of Gas Turbine Blade Airfoil Tip, Engineering, Vol.3 No.3, 2011
• Ahmad Reza Fazeli, Ebrahim Sharifi
• Citations: 4 (Details)

• Generation and Analyzes of Guided WAVES in Planar Structures, Engineering, Vol.3 No.5, 2011
• E. Sotja, P. Malkaj, Dh. Sotja
• Citations: 4 (Details)

• Updating Geologic Models using Ensemble Kalman Filter for Water Coning Control, Engineering, Vol.3 No.5, 2011
• Cesar A. Mantilla, Sanjay Srinivasan, Quoc P. Nguyen
• Citations: 4 (Details)

• Computation of Error in Estimation of Nonlinearity in ADC Using Histogram Technique, Engineering, Vol.3 No.6, 2011
• Radhe Shyam Gamad, Deepak Kumar Mishra
• Citations: 4 (Details)

• Thin-Walled Tube Extension by Rigid Curved Punch, Engineering, Vol.3 No.5, 2011
• R. I. Nepershin
• Citations: 4 (Details)

• Analysis, Modeling and Simulation of a Poly-Bag Manufacturing System, Engineering, Vol.4 No.5, 2012
• R. A. R. C. Gopura, T. S. S. Jayawardane
• Citations: 4 (Details)

• DNAPL Infiltration in a Two-Dimensional Porous Medium—Influence of the Shape of the Solid Particles, Engineering, Vol.3 No.12, 2011
• Mustapha Hellou, Trong Dong Nguyen, Pascal Dupont
• Citations: 4 (Details)

• The Empirical Prediction of Gas Dispersion Parameters on Mechanical Flotation Cells, Engineering, Vol.4 No.1, 2012
• Behzad Shahbazi, Bahram Rezai, Seyed Mohammad Javad Koleini, Mohammad Noaparast
• Citations: 4 (Details)

• Qualitative and Quantitative Analysis of the Inorganic Materials Changes with Time in the Stages of the Wastewater Treatment Plant, Engineering, Vol.4 No.8, 2012
• Falah Bani Hani, Mohammad Abdallah Qasaimeh, Ahmad Qasaimeh
• Citations: 4 (Details)

• Power Generation with Vegetable Oils in the Italian Scenario: A 20 MW Case Study. Technical Feasibility Analysis and Economical Aspects, Engineering, Vol.4 No.9, 2012
• Alfonso Calabria, Roberto Capata
• Citations: 4 (Details)

• A Study Regarding Solution of a Knowledge Model Based on the Containing-Type Error Matrix Equation, Engineering, Vol.4 No.8, 2012
• Xilin Min, Kaizhong Guo, Jize Huang
• Citations: 4 (Details)

• Live Line Measuring the Parameters of 220 kV Transmission Lines with Mutual Inductance in Hainan Power Grid, Engineering, Vol.5 No.1B, 2013
• Zhongzhu Xu, Zhijian Hu, Chuanqi Li
• Citations: 4 (Details)

• Advanced Burst Mode Control to Reduce the Standby Power of Flyback Converter, Engineering, Vol.5 No.1B, 2013
• Min-Sung Kim, Hyoung-Woo Kim, Ji-Hye Jang, Ki-Hyun Kim
• Citations: 4 (Details)

• A Wind-Solar-Energy Storage System Leading to High Renewable Penetration in the Island System of Kinmen, Engineering, Vol.5 No.1B, 2013
• Yuan-Kang Wu, Ching-Yin Lee, Bo-Shiung Jan, Yong-Qing Huang
• Citations: 4 (Details)

• NDI of Rail Squats and Estimating Defect Size and Location Using Lock-In Thermography, Engineering, Vol.5 No.1, 2013
• Daren Peng, Rhys Jones
• Citations: 4 (Details)

• Experimental Design in Solvent Extraction: A Study for Divalent Metals Separation in D2EHPA/Isoparaffin System, Engineering, Vol.4 No.11, 2012
• Clenilson Da Silva Sousa Junior, Marisa Nascimento, Lídia Yokoyama, Osvaldo Galvão Caldas Da Cunha
• Citations: 4 (Details)

• Migrated Exploding Reflectors in Evaluation of Finite Difference Solution for Inhomogeneous Seismic Models, Engineering, Vol.4 No.12A, 2012
• Maryam Nejati, Hosein Hashemi
• Citations: 4 (Details)

• Finite Element Modeling of Seismic Response of Field Fabricated Liquefied Natural Gas (LNG) Spherical Storage Vessels, Engineering, Vol.5 No.6, 2013
• Oludele Adeyefa, Oluleke Oluwole
• Citations: 4 (Details)

• Estimation of Extreme Flows in Nkana River to Verify the Adequacy of Naming’ongo Bridge Waterway, Engineering, Vol.5 No.3, 2013
• Zacharia Katambara, Joseph J. Msambichaka, Joseph Mkisi
• Citations: 4 (Details)

• Modeling Natural Gas Productivity Recovery from a Hydrate Reservoir Well, Engineering, Vol.5 No.4, 2013
• Bin Dou, Hui Gao, Binbin Fan, Lei Ren
• Citations: 4 (Details)

• Validation of an In Vitro Model to Study Human Cartilage Responses to Compression, Engineering, Vol.4 No.10B, 2012
• Natalia de Isla, Céline Huselstein, Didier Mainard, Jean-François Stoltz
• Citations: 4 (Details)

• A Novel Application in Green Chemical Processing Using Reject Brines and Carbon Dioxide as Raw Materials, Engineering, Vol.5 No.1A, 2013
• Hussein Abdel-Aal, K. M. Zohdy, Maha Abdelkreem, S. M.-S. Abdel-Hamid, M. Bassyouni
• Citations: 4 (Details)

• Partial Reflection of Hyaluronan Molecules Inside the Taylor-cone During Electrospray, Engineering, Vol.4 No.10B, 2012
• Zhikai Tan
• Citations: 4 (Details)

• Cloning, Expression, and Immunogenicity Analysis of the CpsE Protein from Group B Streptococcus Isolated from Tilapia (Oreochromis Niloticus), Engineering, Vol.4 No.10B, 2012
• Xi Fu, Kaiyu Wang, Jinlu Huang, Jun Wang, Hai Lian, Yang He, Lanmin Li, Kaiyu Wang
• Citations: 4 (Details)

• Mechanical Stress Analysis of a 600MW Supercritical Boiler Superheater Outlet Header, Engineering, Vol.5 No.1B, 2013
• Dongyi Li, Zhongguang Fu, Qiang Zhang, Ting He
• Citations: 4 (Details)

• Agrobacterium Tumefaciens Based Transformation of Pelargonium x Hortrum cv. ‘Samba’ with Anti-1-aminocyclopropane-1-carboxylate Synthase cDNA to Regulate Ethylene Biosynthesis, Engineering, Vol.4 No.10B, 2012
• Rajinder S. Ranu, Jianguo Fan, Sarada Krishnan, Pradeep Agarwal., Amitva Mitra
• Citations: 3 (Details)

• Towards a Methodology for the Differential Analysis in Human Locomotion: A Pilot Study on the Participation of Individuals with Multiple Sclerosis, Engineering, Vol.4 No.10B, 2012
• Huiying Yu, Thompson Sarkodie-Gyan
• Citations: 3 (Details)

• Case Study on Assessment of Mild Traumatic Brain Injury Using Granular Computing, Engineering, Vol.4 No.10B, 2012
• Melaku A. Bogale, Huiying Yu, Thompson Sarkodie-Gyan, Murad Alaqtash, James Moody, Richard Brower
• Citations: 3 (Details)

• Does Making Method of Alginate Hydrogel Influence the Chondrogenic Differentiation of Human Mesenchymal Stem Cells?, Engineering, Vol.4 No.10B, 2012
• Jessica Schiavi, Naceur Charif, Natalia de Isla, Danièle Bensoussan, Jean-François Stoltz, Nadia Benkirane-Jessel, Céline Huselstein
• Citations: 3 (Details)

• Leptin Receptor in Ram Epididymal Spermatozoa, Engineering, Vol.4 No.10B, 2012
• Mohammad Roostaei-Ali Mehr, Reza Rajabi-Toustani, Rasool Motamedi-Mojdehi
• Citations: 3 (Details)

• Improvement of Durum Wheat (Triticum durum) Surface Irrigation in Swelling Soils, Engineering, Vol.5 No.2, 2013
• Adel Slatni, Khemaies Zayani, Ali Chebil, Abdelaziz Zairi, Samir Yacoubi, Enrique Playan
• Citations: 3 (Details)

• Evaluation of Hepatic Cystic Echinococcosis’ CT image in Xinjiang Uygur Autonomous Region based on Kolmogorov Complexity Model, Engineering, Vol.4 No.10B, 2012
• Jingjing Zhou, Murat Hamit, Abdugheni Kutluk, Chuanbo Yan, Li Li, Jianjun Chen, Yanting Hu, Dewei Kong, Weikang Yuan
• Citations: 3 (Details)

• Finite Element Modeling of Variable Membrane Thickness for Field Fabricated Spherical (LNG) Pressure Vessels, Engineering, Vol.5 No.5, 2013
• Oludele Adeyefa, Oluleke Oluwole
• Citations: 3 (Details)

• A Study on the Control Technique of Construction Project Process, Engineering, Vol.5 No.3, 2013
• Changming Hu, Shaoping Zhang, Xueyan Wang
• Citations: 3 (Details)

• On Point-Based Haptic Rendering, Engineering, Vol.5 No.5A, 2013
• Shi Wen, Shahram Payandeh
• Citations: 3 (Details)

• Runge-Kutta Schemes Coefficients Simulation for Comparison and Visual Effects, Engineering, Vol.5 No.5, 2013
• Tajudeen Abiola Ogunniyi Salau, Olusegun Olufemi Ajide
• Citations: 3 (Details)

• Wireless Bioradar Sensor Networks for Speech Detection and Communication, Engineering, Vol.5 No.5B, 2013
• Ying Tian, Sheng Li, Jianqi Wang
• Citations: 3 (Details)

• Towards a Mathematical Model for Elastic Wave Propagation in Granular Materials, Engineering, Vol.4 No.12A, 2012
• Leonardo Trujillo, Vanessa Torres, Franklin Peniche, Leonardo Di G. Sigalotti
• Citations: 3 (Details)

• Operation Indices for Smart Power Dispatch Center Design, Engineering, Vol.5 No.1B, 2013
• Jianing Liu, Puming Li, Jin Zhong, Liang Liang
• Citations: 3 (Details)

• Application of STATCOM for Damping Subsynchronous Resonance in a Multi-machine System, Engineering, Vol.5 No.1B, 2013
• Yanlong Sun, Liangeng Ban, Daye Yang, Yizhen Wang
• Citations: 3 (Details)

• Approach of Training Working Staff of Power System Operation Mode Based on State Evaluation, Engineering, Vol.5 No.1B, 2013
• Feng Qian, Youping Fan, Chen Liu, Yunfei Ai
• Citations: 3 (Details)

• Habitat Evaluation on Scour Hole Downflow Low Drop Structure Types Using Large-Scale Experiment, Engineering, Vol.4 No.9, 2012
• Joongu Kang, Changsung Kim, Sanghwa Jung, Hongkoo Yeo
• Citations: 3 (Details)

• Correlation between Hardness, Structure and Electrochemical Performance of an AlZnMnMg Alloy, Engineering, Vol.4 No.9, 2012
• S. Valdez, B. Campillo, J. J. Islas
• Citations: 3 (Details)

• Assessment of Incineration Process Performance in a District Hospital Using Statistical Analysis, Engineering, Vol.4 No.8, 2012
• Samwel Victor Manyele, Ignatio Simon Kagonji
• Citations: 3 (Details)

• 3D Display System Based On Digital Holography Application In Making Cartoon Holography, Engineering, Vol.4 No.7, 2012
• Niveen Farid, Mohamed El Bahrawi
• Citations: 3 (Details)

• Reverse Engineering of Turbocharger Compressor Designs Based on Non-Parametric CAD Data, Engineering, Vol.4 No.7, 2012
• Oliver Velde, Gero Kreuzfeld, Ingolf Lehmann
• Citations: 3 (Details)

• Global Warming Control to Mitigate Climate Change, Engineering, Vol.4 No.5, 2012
• Antipas T. S. Massawe
• Citations: 3 (Details)

• Effect of Spacecraft Aerodynamics and Heat Shield Characteristics on Optimal Aeroassisted Transfer, Engineering, Vol.4 No.6, 2012
• Antonio Mazzaracchio, Mario Marchetti
• Citations: 3 (Details)

• Achieving Sustainable Development in Small Communities via Combined Heat and Power Systems, Engineering, Vol.4 No.3, 2012
• Olaosebikan A. Olafadehan, Lukumon Salami, Babatunde K. Adeoye, Toluwalase O. Ajayi
• Citations: 3 (Details)

• Design of Software for Maintenance Workforce Scheduling (A Case Study of Afam Power Station, Nigeria), Engineering, Vol.4 No.5, 2012
• Ikuobase Emovon, Macaulay Thomas Lilly, Stephen Ogajiye Tamuno-Ojuemi Ogaji
• Citations: 3 (Details)

• Transient Waves Due to Thermal Sources in a Generalized Piezothermoelastic Half-Space, Engineering, Vol.3 No.3, 2011
• Jagan Nath Sharma, Anita Devi Thakur, Yogeshwar Dutt Sharma
• Citations: 3 (Details)

• The Implementation of a High Efficiency Full-Bridge Converter, Engineering, Vol.3 No.4, 2011
• Joy Iong-Zong Chen
• Citations: 3 (Details)

• Reverse Engineering Closely-Spaced Free-Form Shapes for a Fabric-Over-Body Model, Engineering, Vol.3 No.10, 2011
• Daniel Chen, Anish Ravindran, Pradeep Vishwabrahmanasaraf
• Citations: 3 (Details)

• Structural Reanalysis of Dynamic Systems Using Model Updating Method, Engineering, Vol.3 No.10, 2011
• Kyoung-Bong Han
• Citations: 3 (Details)

• Experimental Study for the Determination of the Material Diameter of the Riprap Bed Protection, Engineering, Vol.3 No.10, 2011
• Joongu Kang, Sanghwa Jung, DOongsub Rhee, Hongkoo Yeo
• Citations: 3 (Details)

• Generalized Porothermoelasticity of Asphaltic Material, Engineering, Vol.3 No.11, 2011
• Mohammad H. Alawi
• Citations: 3 (Details)

• Fatigue Performance of Precast FRP-Concrete Composite Deck with Long Span, Engineering, Vol.3 No.11, 2011
• Keunhee Cho, Jeong-Rae Cho, Sung Tae Kim, Byung-Suk Kim, Sung Yong Park
• Citations: 3 (Details)

• Study of Tsunamis by Dimensional Analysis, Engineering, Vol.3 No.9, 2011
• S. Ghasemi
• Citations: 3 (Details)

• A Kind of Potential Practical Sensors of Metamaterial in Electromagnetic Flaw Nondestructive Testing, Engineering, Vol.3 No.7, 2011
• Zhanxian Xu
• Citations: 3 (Details)

• Influence of Inter-Particle Distance, Entrapped Water Volume and Salinity of Water on the Escape Velocity of Particles on a Riverbank, Engineering, Vol.3 No.7, 2011
• Sanchayan Mukherjee, Asis MazumdarP
• Citations: 3 (Details)

• Investigation and Optimization of Sn/Gr Lubricants Effects on Cold Extrudability of Fe-TiC Nanocomposite Using Taguchi Robust Design Method, Engineering, Vol.3 No.7, 2011
• Seyed Abdolkarim Sajjadi, Seyed Mojtaba Zebarjad, Nasrin Sasani, Heydar Khadivi, Behrooz Naderi
• Citations: 3 (Details)

• Analysis of Rectangular Notch Antenna for Dual-Band Operation, Engineering, Vol.2 No.2, 2010
• R.K. Vishwakarma, S. Tiwari
• Citations: 3 (Details)

• Analysis for Transverse Sensitivity of the Microaccelerometer, Engineering, Vol.1 No.3, 2009
• Yu LIU, Guochao WANG, Changwen GUO
• Citations: 3 (Details)

• On an MC-CDMA System Operating with Distinctive Scenarios of Antenna, Engineering, Vol.1 No.2, 2009
• Joy Iong-Zong CHEN, Hau-Wei HUANG, Kai Zhi ZHUANG
• Citations: 3 (Details)

• Multi-Area Unit Commitment Using Hybrid Particle Swarm Optimization Technique with Import and Export Constraints, Engineering, Vol.1 No.3, 2009
• S. R. P. CHITRA SELVI, R. P. KUMUDINI DEVI, C. CHRISTOBER ASIR RAJAN
• Citations: 3 (Details)

• A Novel Solution Based on Differential Evolution for Short-Term Combined Economic Emission Hydrothermal Scheduling, Engineering, Vol.1 No.1, 2009
• Chengfu Sun, Songfeng Lu
• Citations: 3 (Details)

• Analysis for Pull-In Voltage of a Multilayered Micro-Bridge Driven by Electrostatic Force, Engineering, Vol.2 No.1, 2010
• Y. LIU, G.C. WANG, H.Y. YANG
• Citations: 3 (Details)

• Parameters Optimization of Multi-Branch Horizontal Well Basing on Streamline Simulation, Engineering, Vol.2 No.12, 2010
• Hong-Jun Yin, Xiao-Qi Chen, Ming Cai, Jun-Ting Zhang
• Citations: 3 (Details)

• Study of Complex Formation Constants for Some Cations With O-Phenylenediamine in Binary Systems Using Square Wave Polarography Technique, Engineering, Vol.2 No.12, 2010
• Azizollah Nezhadali, Hanieh Sharifi
• Citations: 3 (Details)

• A Note on the Effect of Negative Poisson’s Ratio on the Deformation of a Poroelastic Half-Space by Surface Loads, Engineering, Vol.2 No.6, 2010
• Sunita Rani, Raman Kumar, Sarva Jit Singh
• Citations: 3 (Details)

• Application of SimaPro7 on Al-Hilla City Sewerage Network, Iraq, Engineering, Vol.7 No.5, 2015
• Mohammad Ali Alanbari, Hind Qasim Alazzawi, Nadhir Al-Ansari, Sven Knutsson
• Citations: 3 (Details)

• Computational Study on Effect of Variation of Pitch-Chord on Secondary Losses in Rectilinear Turbine Cascade, Engineering, Vol.7 No.11, 2015
• Pulijala Shravya
• Citations: 3 (Details)

• Trilinear Hexahedra with Integral-Averaged Volumes for Nearly Incompressible Nonlinear Deformation, Engineering, Vol.7 No.11, 2015
• Craig D. Foster, Talisa Mohammad Nejad
• Citations: 3 (Details)

• Constant-Stress Accelerated Degradation Life Test of an Organic Light-Emitting Diode Display under Violet Light, Engineering, Vol.8 No.2, 2016
• François-Xavier Fortier, Sylvain G. Cloutier
• Citations: 3 (Details)

• Static Digits Recognition Using Rotational Signatures and Hu Moments with a Multilayer Perceptron, Engineering, Vol.6 No.11, 2014
• Francisco Solís, Margarita Hernández, Amelia Pérez, Carina Toxqui
• Citations: 3 (Details)

• Experimental Study on Innovative Slip Form Method for the Construction of Tapered Concrete Pylon of Long-Span Cable Bridge, Engineering, Vol.6 No.10, 2014
• Hee Seok Kim, Young Jin Kim, Won Jong Chin, Hyejin Yoon
• Citations: 3 (Details)

• Effect Modeling of Count Data Using Logistic Regression with Qualitative Predictors, Engineering, Vol.6 No.12, 2014
• Haeil Ahn
• Citations: 3 (Details)

• Experimental Study on Flow Characteristic in Sloping Weir, Engineering, Vol.6 No.7, 2014
• Joongu Joongu Kang, Sungjoong Kim, Hongkoo Yeo, Namjoo Lee
• Citations: 3 (Details)

• Physical Characterization and Elaboration Discussion of a Clay-PEG 6000 Composite with Natural Clay Matrix, Engineering, Vol.6 No.7, 2014
• Iatimad Akhrif, Mostapha El Jai, Laila Mesrar, Ahmed Elkhalfi, Abdelhamid Touache, Raouf Jabrane
• Citations: 3 (Details)

• Determine the Stress Calculating Mode of Sliding Failure of Soil Mass under the Push-Extend Multi-under-Reamed Pile, Engineering, Vol.6 No.5, 2014
• Yongmei Qian, Xuezhe Chen, Xuewen Xie
• Citations: 3 (Details)

• A Method for Assessing Customer Harmonic Emission Level Based on the Iterative Algorithm for Least Square Estimation, Engineering, Vol.5 No.9B, 2013
• Runrong Fan, Tianyuan Tan, Hui Chang, Xiaoning Tong, Yunpeng Gao
• Citations: 3 (Details)

• Load-Measuring Pot Bearing with Built-In Load Cell —Part I: Design and Performance, Engineering, Vol.5 No.11, 2013
• Jeong-Rae Cho, Young Jin Kim, Jong-Won Kwark, Sung Yong Park, Won Jong Chin, Byung-Suk Kim
• Citations: 3 (Details)

• On Thermodynamic Analysis of Substances with Negative Coefficient of Thermal Expansion, Engineering, Vol.5 No.11, 2013
• Kal Renganathan Sharma
• Citations: 3 (Details)

• Using Chou’s Pseudo Amino Acid Composition for Protein Remote Homology Detection, Engineering, Vol.5 No.10B, 2013
• Bin Liu, Xiaolong Wang
• Citations: 3 (Details)

• New Approach for Limited-Angle Problems in Electron Microscope Based on Compressed Sensing, Engineering, Vol.5 No.10B, 2013
• Marc Vila Oliva, Hamed Hamid Muhammed
• Citations: 3 (Details)

• Using the Support Vector Machine Algorithm to Predict β-Turn Types in Proteins, Engineering, Vol.5 No.10B, 2013
• Xiaobo Shi, Xiuzhen Hu
• Citations: 3 (Details)

• The Wall Shear Stress of a Pulsatile Blood Flow in a Patient Specific Stenotic Right Coronary Artery, Engineering, Vol.5 No.10B, 2013
• Biyue Liu
• Citations: 3 (Details)

• Improving the Use of Robotic Welding of Aluminum Boats through Modularization, Engineering, Vol.6 No.1, 2014
• Paul Kah, Esa Hiltunen, Jukka Martikainen
• Citations: 3 (Details)

• Automatic Detection of the Electrical Elicited Stapedius Reflex by Evaluation of Its Electromyographic Signals, Engineering, Vol.6 No.4, 2014
• Ralf Warmuth, Martin Behrens, Martin Behrens, Rüdiger Dahl, Karsten Ehrt, Hans Wilhelm Pau, Ralf Salomon
• Citations: 3 (Details)

• Computational Simulations of Bone Remodeling under Natural Mechanical Loading or Muscle Malfunction Using Evolutionary Structural Optimization Method, Engineering, Vol.6 No.3, 2014
• Hadi Latifi, Yi Min Xie, Xiaodong Huang, Mehmet Bilgen
• Citations: 3 (Details)

• Information Transfer Index-A Promising Measure of the Corticomusclar Interaction, Engineering, Vol.5 No.10B, 2013
• Ping Xie, Peipei Ma, Xiaoling Chen, Xiaoli Li, Yuping Su
• Citations: 3 (Details)

• Using Variations of Somatosensory Evoked Potentials to Quantify Spinal Cord Injury Level, Engineering, Vol.5 No.10B, 2013
• Hasan Mir, Hasan Al-Nashash, Douglas Kerr, Angelo All, Nitish Thakor
• Citations: 3 (Details)

• Modeling and Simulation of Heat Transfer Phenomenon Related to Mold Heating during Investment Casting, Engineering, Vol.12 No.5, 2020
• Muhammad Musaddique Ali Rafique, Umair Shah
• Citations: 3 (Details)

• Dynamic Failure Model of Thin Coal and Rock Mass under Uniform Impact Load, Engineering, Vol.12 No.10, 2020
• Feng Li, Fangfei Sha, Minbo Zhang, Zijian He, Xinhui Dong, Baorui Ren
• Citations: 3 (Details)

• Boundary Exponential Stabilization of a One-Dimensional Anti-Stable Wave Equation with Control Matched Disturbance, Engineering, Vol.12 No.9, 2020
• Ruicheng Li
• Citations: 3 (Details)

• Application of FPGA in Process Tomography Systems, Engineering, Vol.12 No.10, 2020
• Ling En Hong, Yusri Bin Md. Yunos
• Citations: 3 (Details)

• Non-Cooperative Spectrum Sensing Based on Cyclostationary Model of Digital Signals in the Context of Cognitive Radio, Engineering, Vol.13 No.1, 2021
• Jean-Marie Kadjo, Raoule Agoua, Aliou Bamba, Adama Konaté, Olivier Asseu
• Citations: 3 (Details)

• Preparation of Activated Carbon from Holdfasts of Kelp, Large Brown Seaweed, Saccharina japonica, Engineering, Vol.13 No.2, 2021
• Osamu Terakado, Futoshi Tanaka, Yuki Tsunamori
• Citations: 3 (Details)

• Multiplicity Results for Second Order Impulsive Differential Equations via Variational Methods, Engineering, Vol.13 No.2, 2021
• Huanhuan Wang, Dan Lu, Huiqin Lu
• Citations: 3 (Details)

• Investigation of Working Bodies of the Device for Separation of Fibers Suitable for Spinning from Cotton Waste, Engineering, Vol.12 No.12, 2020
• Avazbek Obidov, Mirzaolim Sultonov
• Citations: 3 (Details)

• Emission of Air Pollution in the Transport Sector: Case Study of the City of Campos dos Goytacazes, Brazil, Engineering, Vol.12 No.12, 2020
• Marcenilda A. Lima, Marcelo S. Sthel
• Citations: 3 (Details)

• Technical and Economic Feasibility of Solar Pump Irrigation in the North-Niayes Region in Senegal, Engineering, Vol.13 No.7, 2021
• Aminata Sarr, Lamine Diop, Ibrahima Diatta, Yaye Deffa Wane, Ansouma Bodian, Sidy Mouhamed Seck, Nicola Lamaddalena, Luciano Mateos
• Citations: 3 (Details)

• Analysis of the Composition and Physical and Mechanical Properties of Raw Materials for Thermal Insulation Fabrics, Engineering, Vol.13 No.6, 2021
• Juramirza Abdiramatovich Kayumov, Matluba Nazarova, Bohodir Vohobjon Ogli Obilov, Farhodjon Mahmudjonovich Dadaboyev, Zuhra Yigitaliyevna Mamadaliyeva
• Citations: 3 (Details)

• Sulfide Stress Cracking Assessment of Carbon Steel Welding with High Content of H₂S and CO₂ at High Temperature: A Case Study, Engineering, Vol.12 No.12, 2020
• Apolinar Albiter
• Citations: 3 (Details)

• Development of a Virtual Environment for Simulation of a 3D Road Profile Using OpenCRG and MATLAB GUI, Engineering, Vol.13 No.12, 2021
• Théophile Roch Ori, N’Golo Mamadou Kone, Sibiri Traore
• Citations: 3 (Details)

• Hermite Finite Element Method for a Class of Viscoelastic Beam Vibration Problem, Engineering, Vol.13 No.8, 2021
• Ying Tang, Zhe Yin
• Citations: 3 (Details)

• Modeling of Different Irrigation Methods for Maize Using AquaCrop Model: Case Study, Engineering, Vol.13 No.8, 2021
• Thamer Thamer, Nadine Nassif, Ayad Almaeini, Nadhir Al-Ansari, Diaa Hassan
• Citations: 3 (Details)

• Theoretical Study of the Movement of Cotton Seed Flow along the Contour of the Rib, Engineering, Vol.13 No.10, 2021
• Botir Mardonov, Farkhod Ibrokhimov, Khamit Akhmetxodjayev, Khayrullo Sharipov, Mukhammad Tojiboyev
• Citations: 3 (Details)

• Determination of Correction Values of Operating Reliability of Assembly Components of the Assembly—Front Spinner Spinning Box (R1 Rieter) on the Basis of Operating Data, Engineering, Vol.13 No.11, 2021
• Slobodan Stefanović, Korabayev Sherzod Ahmadjonovich, Shoxobiddinova Dilafruz Erkinzonqizi
• Citations: 3 (Details)

• Comparison between Lambert and Maxwell Approaches in the Modelling of Microwave Heating of Liquid Foods, Engineering, Vol.11 No.1, 2019
• Rino Apicella, Vittorio Romano
• Citations: 3 (Details)

• Analysis of Measured Employees’ Absenteeism in the Forensic Science Laboratory, Engineering, Vol.11 No.3, 2019
• Gloria Cuthbert Omari, Samwel Victor Manyele, George Mwaluko
• Citations: 3 (Details)

• Increasing the Safety of People Activity in Aggressive Potential Locations, Analyzed through the Probability Theory, Modeling/Simulation and Application in Underground Coal Mining, Engineering, Vol.11 No.2, 2019
• Emil Pop, Gabriel-Ioan Ilcea, Ionut-Alin Popa, Lorand Bogdanffy
• Citations: 3 (Details)

• Enhanced Removal of Phosphates by the Adsorbent Consisting of Iron Oxide Loaded on Porous Chitosan/Cellulose Acetate Particle, Engineering, Vol.11 No.7, 2019
• Nancy M. Waweru, Jingjing Yang, Herbert C. Bolokonya
• Citations: 3 (Details)

• Numerical Assessment on Fin Design Parameters Employed for Augmentation of Natural Convection and Fluid Flow in a Horizontal Latent Heat Thermal Energy Storage Unit, Engineering, Vol.11 No.7, 2019
• Mohammad Khan, Nan Zhao, Tianhao Xu
• Citations: 3 (Details)

• Radiological Effects of Soil and Rock Samples of Different Libyan Regions, Engineering, Vol.11 No.5, 2019
• Abdu Assalam A. Algattawi, Mohammed Fayez-Hassan, Emad Ibrahim Khalil, Hilmy Abo Elez
• Citations: 3 (Details)

• The Effectiveness of the Squared Error and Higgins-Tsokos Loss Functions on the Bayesian Reliability Analysis of Software Failure Times under the Power Law Process, Engineering, Vol.11 No.5, 2019
• Freeh N. Alenezi, Christ P. Tsokos
• Citations: 3 (Details)

• Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics, Engineering, Vol.12 No.2, 2020
• Donglian Tan
• Citations: 3 (Details)

• The Use of Esterificate for Fattening of Leather for Shoe Uppers, Engineering, Vol.11 No.6, 2019
• Makhbuba Shamsieva, Tulkin Kodirov, Khilola Makhammadieva
• Citations: 3 (Details)

• Analysis of Fatigue Strain, Fatigue Modulus and Fatigue Damage for the Model Formulation of Concrete Based on Strain Life Approach, Engineering, Vol.11 No.9, 2019
• Indra Narayan Yadav, Kamal Bahadur Thapa
• Citations: 3 (Details)

• Environmental Assessment and Dielectric Performances of the Secondary Electrical Insulation in Low Voltage Motors Impregnated by Different Techniques, Engineering, Vol.9 No.10, 2017
• Manh Quan Nguyen, Simon Dario, David Malec, Dominique Mary, Jean-Pascal Cambronne, Damien Prunel, Julie Orgelet
• Citations: 3 (Details)

• On the Relation of Grain Orientation and Opening Crack of an Al-Cu-Mg Sheet, Engineering, Vol.9 No.5, 2017
• Cai Hu
• Citations: 3 (Details)

• Analysis of the Effect of Subgroup Size on the X-Bar Control Chart Using Forensic Science Laboratory Sample Influx Data, Engineering, Vol.9 No.5, 2017
• Samwel Victor Manyele
• Citations: 3 (Details)

• Simulation of Solidification Parameters during Zr Based Bulk Metallic Glass Matrix Composite’s (BMGMCs) Additive Manufacturing, Engineering, Vol.10 No.3, 2018
• Muhammad Musaddique Ali Rafique
• Citations: 3 (Details)

• The New Transmission for a Hybrid Car, Engineering, Vol.10 No.4, 2018
• R. G. Khadeev
• Citations: 3 (Details)

• Proposals to Promote the Development of Virtual Reality in China—Based on Patent Econometric Analysis, Engineering, Vol.10 No.5, 2018
• Zhengang Zhang, Minglun Xu, Jieming Huang
• Citations: 3 (Details)

• Construction of Comprehensive Development Index and Analysis on the Development Trend of Solar Energy Industry, Engineering, Vol.10 No.8, 2018
• Linlin Jia, Xuehua Zhang, Yahui Wu
• Citations: 3 (Details)

• Shear Failure Criterion and Constant Volume Ring Shear Testing Method for Clayey Soil, Engineering, Vol.8 No.8, 2016
• Rafig Azzam
• Citations: 3 (Details)

• Failure Analysis of Ceramic Substrates Used in High Power IGBT Modules, Engineering, Vol.8 No.9, 2016
• Zenjebil Jouini, Zarel Valdez-Nava, David Malec
• Citations: 3 (Details)

• Numerical Simulation Study on the Detection of Weak Structural Plane of Rock Slope by Using 3D Electrical Resistivity Tomography, Engineering, Vol.8 No.7, 2016
• Xin Zhang
• Citations: 3 (Details)

• Monitoring Saccharification Process in Brewery Industry Using Quality Control Charts, Engineering, Vol.8 No.7, 2016
• Samwel Manyele, Nyakorema Rioba
• Citations: 3 (Details)

• Analysis of Stress Strain State of X-60 Pipe Weld Joints Employing Magnetic-Anisotropy Indicator of Mechanical Stress, Engineering, Vol.8 No.7, 2016
• Hamid Suliman Hamid Elhag, Nikulin Vasili, Isaac Einav, Yagoub Kamal Eldin
• Citations: 3 (Details)

• Experimental Study of Flexural Behaviour of Reinforced Baked Clay Beams under Impact Loading, Engineering, Vol.8 No.6, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 3 (Details)

• Damage Characterization of Composite Structures Using Difference Peak Signal-to-Noise Ratio as a Function of Variable Wavelets (ΔPSNR-ΔW), Engineering, Vol.8 No.4, 2016
• Mahmoud Zaki Iskandarani
• Citations: 3 (Details)

• Air Tightness Control of Passenger Car Wheels, Engineering, Vol.9 No.2, 2017
• Vatroslav Grubisic
• Citations: 3 (Details)

• Suitability of Large Sized Compacted Baked Clay Blocks as a Walling Material, Engineering, Vol.8 No.10, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 3 (Details)

• Effect of Reinforcement on Deflection and Cracks in Baked Clay Beams, Engineering, Vol.8 No.10, 2016
• Nawab Ali Lakho, Muhammad Auchar Zardari
• Citations: 3 (Details)

• XPS Depth Profile Study of Sprayed Ga₂O₃ Thin Films, Engineering, Vol.15 No.8, 2023
• Towhid Adnan Chowdhury
• Citations: 3 (Details)

• Dam Safety in Jordan: Factors Affecting Dam Safety, Responsibilities and Required Actions, Engineering, Vol.15 No.9, 2023
• Elias Salamah, Tayel El-Hasan, Maher Abu-Jamah
• Citations: 3 (Details)

• Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws, Engineering, Vol.14 No.8, 2022
• Azizov Shuhrat Mamatovich, Uzoqov Farxodjon, Shermuhammad Alijonov, Hasanov Ahmadjon, Mirzakarimov Mirsharofiddin
• Citations: 3 (Details)

• Renewable Methanol Production Using Captured Carbon Dioxide and Hydrogen Generated through Water-Splitting, Engineering, Vol.14 No.8, 2022
• Dima Al Hashar
• Citations: 3 (Details)

• Theoretical Optimization of the Production of Heating Layers Using Local Wool Fibers, Engineering, Vol.14 No.12, 2022
• Matluba Abdurashid Kizi Nazarova, Juramirza Abdiramatovich Kayumov, Axtam Akramovich Qosimov, Abdulrasul Abdumajitovich Mahmudov
• Citations: 3 (Details)

• CRP Binding Kinetics Enhancement Using Local Narrowing into a Bent Channel: Finite Element Analysis, Engineering, Vol.14 No.1, 2022
• Mohamed Bahri, Imen Dermoul, Marshet Getaye, Mohamed Amin Elaguech, Khouloud Djebbi, Mounir Ben Ali, Chaker Tlili, Deqiang Wang
• Citations: 3 (Details)

• Application of Machine Learning Methods on Climate Data and Commercial Microwave Link Attenuations for Estimating Meteorological Visibility in Dusty Condition, Engineering, Vol.14 No.2, 2022
• Wend Yam Serge Boris Ouedraogo, Sibiri Tiemounou, Moumouni Djibo, Ali Doumounia, Serge Roland Sanou, Moumouni Sawadogo, Idrissa Guira, François Zougmore
• Citations: 3 (Details)

• Effect of Adsorbent/Adsorbate Couple on the Performance of Adsorption Solar Refrigerator, Engineering, Vol.14 No.3, 2022
• Guy Christian Tubreoumya, Eloi Salmwendé Tiendrebeogo, Oumar Bailou, Téré Dabilgou, Belkacem Zeghmati, Alfa Oumar Dissa, Jean Koulidiati, Antoine Bere
• Citations: 2 (Details)

• The Solving of the Inverse Thermal Conductivity Problem for Study the Short Linear Heat Pipes, Engineering, Vol.14 No.6, 2022
• Arkady Vladimirovich Seryakov
• Citations: 2 (Details)

• Influence of the Ginning Process on the Quality of Raw Cotton, Engineering, Vol.13 No.12, 2021
• Mamadaliev Nodirbek, Komilov Shukhratjon, Akhmedxodjaev Khamit
• Citations: 2 (Details)

• Robust Radiometric Normalization of the Near Equatorial Satellite Images Using Feature Extraction and Remote Sensing Analysis, Engineering, Vol.15 No.2, 2023
• Hayder Dibs, Shattri Mansor, Noordin Ahmad, Nadhir Al-Ansari
• Citations: 2 (Details)

• Raw Gangue Filling Mining under Construction
  —A Case Study in China, Engineering, Vol.15 No.3, 2023
• Daqing Li, Changxiang Wang, Jinjie Xiao, Wei Lu, Baoliang Zhang, Zongkai Li, Xiaozhang Tong
• Citations: 2 (Details)

• Determining the Optimal Parameters of an Advanced Linter Machine, Engineering, Vol.15 No.12, 2023
• Obidov Avazbek Azamatovich, A.J.B. O’g’li, Qosimov Axtam Akramovich
• Citations: 2 (Details)

• Virtual Water Trade and Food Security for Iraq, Engineering, Vol.15 No.7, 2023
• Nasrat Adamo, Nadhir Al-Ansari, Varoujan Sissakian, Jan Laue, Salwan Ali Abed Al Khanfar
• Citations: 2 (Details)

• Application of Fractal Theory in Brick-Concrete Structural Health Monitoring, Engineering, Vol.8 No.9, 2016
• Changmin Yang, Xia Zhao, Yanfang Yao, Zhongqiang Zhang
• Citations: 2 (Details)

• Comparison of Potential Environmental Impacts on the Production of Gasoline and Kerosene, Al-Daura Refinery, Baghdad, Iraq, Engineering, Vol.8 No.11, 2016
• Mohammad A. Alanbari, Israa Rahman, Nadhir Al-Ansari, Sven Knutsson
• Citations: 2 (Details)

• Absolute Internal Energy of the Real Gas, Engineering, Vol.9 No.4, 2017
• Albrecht Elsner
• Citations: 2 (Details)

• Designing a Carbon Nanotube Field-Effect Transistor with High Transition Frequency for Ultra-Wideband Application, Engineering, Vol.9 No.1, 2017
• Ramin Nouri-Bayat, Ali Reza Kashani-Nia
• Citations: 2 (Details)

• Topography Measurement for Monitoring Manufacturing Processes in Harsh Conditions, Engineering, Vol.8 No.5, 2016
• Thomas Mueller, Andreas Poesch, Eduard Reithmeier
• Citations: 2 (Details)

• Bromination of Pd Compounds during Thermal Decomposition of Tetrabromobisphenol A, Engineering, Vol.10 No.4, 2018
• Shunsuke Kuzuhara, Ayaka Sano
• Citations: 2 (Details)

• Numerical Feasibility Study of a Wax Cold Flow Approach for Subsea Tie-In Flowlines Using a 1D Mechanistic Multiphase Flow Simulator, Engineering, Vol.10 No.3, 2018
• Diana González, Milan Stanko, Michael Golan
• Citations: 2 (Details)

• Evaluation of Impairment Caused by MPEG Video Frame Loss, Engineering, Vol.9 No.5, 2017
• Carlos Alexandre Gouvea da Silva, Guilherme Fernandes de Souza Miguel, João Guilherme Sauer, Carlos Marcelo Pedroso
• Citations: 2 (Details)

• Karstification and Tectonic Effects on the Drainage Trend in the Southwestern Part of Iraq, Engineering, Vol.9 No.8, 2017
• Varoujan K. Sissakian, Nadhir Al-Ansari
• Citations: 2 (Details)

• Analysis of Employees’ Professional Development in a Forensic Science Laboratory as a Route towards Organizational Competitiveness, Engineering, Vol.9 No.12, 2017
• Samwel Victor Manyele, Nancy Osmund Nombo, Gloria Cuthbert Omari, George Mwaluko
• Citations: 2 (Details)

• Energy-Exergy Analysis and Carbon (IV) Oxide Emission of an Aluminium Extrusion Plant in Nigeria, Engineering, Vol.9 No.12, 2017
• Mufutau Adekojo Waheed, Peter Olaitan Aiyedun, Wasiu Oyediran Adedeji, Adekunle Adedapo Obisanya, Semiu Taiwo Amosun, Adeniyi Oluwole Adesina
• Citations: 2 (Details)

• Effect of Parallel Computing Environment on the Solution Consistency of CFD Simulations—Focused on IC Engines, Engineering, Vol.9 No.10, 2017
• Seunghwan Keum, Ronald O. Grover Jr., Jian Gao, Xiaofeng Yang, Tang-Wei Kuo
• Citations: 2 (Details)

• Application of Three-Dimensional Visualization Technology in Project Management of Offshore Platform Engineering Construction, Engineering, Vol.11 No.11, 2019
• Jianyuan Yang, Songlin Xia, Jie Shang, Shaofang Li, Zhongde Zhang
• Citations: 2 (Details)

• The Effect of Evotherm on Hot Mix Asphalt, Engineering, Vol.11 No.9, 2019
• Andrew Abah Onoja, Hashim Mohammed Alhassan
• Citations: 2 (Details)

• The Influence of Ceramic Coating on Fatigue Crack Growth Behaviour of X17CrNi15-2 Stainless Steel, Engineering, Vol.12 No.2, 2020
• Ran Li, Wenshu Wei, Shoubin Li, Rui Zhao, Hao Liu, Jiankai Zhang, Jian Ye, Huigang Wu, Yao Xu, Fei Xiao, Mengyu Wu, Dalong Wang, Jingbin Chen, Wei Wang, Na Gao, Rongming Chen
• Citations: 2 (Details)

• Validity of Existing Rain Water Harvesting Dams within Part of Western Desert, Iraq, Engineering, Vol.11 No.12, 2019
• Khaldoon Khaled Alwan, Manal Shakir Ali Al-Kubaisi, Nadhir Al-Ansari
• Citations: 2 (Details)

• Wavelet Transform in Vibroacoustic Diagnostics of Combustion Engines, Engineering, Vol.11 No.7, 2019
• Radoslaw Wrobel, Andrzej Kazmierczak
• Citations: 2 (Details)

• Analysis of Employee’s Longevity and Academic Development in Forensic Science Laboratory, Engineering, Vol.11 No.4, 2019
• Gloria Cuthbert Omari, Samwel Victor Manyele, George Mwaluko
• Citations: 2 (Details)

• Taking into Account of Functional Constraints in Optimization of Modes of Power Systems by Genetic Algorithms, Engineering, Vol.11 No.4, 2019
• Gayibov Tulkin Shernazarovich, Latipov Sherkhon Shuxratovich
• Citations: 2 (Details)

• Safety Control Technology of Deepwater Perforated Gas Well Testing, Engineering, Vol.11 No.3, 2019
• Hao Liang, Muwang Wu
• Citations: 2 (Details)

• Experimental and Quantum Chemical Studies of the Inhibition of Copper with Sodium Dodecyl Sulphate (SDS) in Acidic Medium, Engineering, Vol.10 No.12, 2018
• Mojisola O. Nkiko, Abayomi Oluwabi, Sikiru A. Ahmed, Janet T. Bamgbose
• Citations: 2 (Details)

• Numerical Simulation of the Blood Flow through a Brain Vascular Aneurysm with an Artificial Stent Using the SPH Method, Engineering, Vol.10 No.12, 2018
• Leonardo Di G. Sigalotti, Jaime Klapp, Karla Pedroza, Edgar Nathal, Carlos E. Alvarado-Rodríguez
• Citations: 2 (Details)

• Effects of the Form Factor and the Force of the Gravity on the Thermal Exchanges by Natural Convection in a Rectangular Cavity Filled with Nanofluid, Engineering, Vol.11 No.1, 2019
• L. Eljamali, A. Wakif, Z. Boulahia, M. Zaydan, R. Sehaqui
• Citations: 2 (Details)

• Assessment of Beef Transportation Infrastructure from Slaughtering Facilities in Tanzanian Cities, Engineering, Vol.10 No.11, 2018
• Joseph Tenson Mwashiuya, Samwel Victor Manyele, George Mwaluko
• Citations: 2 (Details)

• Effect of Irrigation System, Tillage System, and Seeding Rates on Wheat (Triticum aestivum L.) Growth, Grain Yield and Its Water Consumption and Efficiency, Engineering, Vol.13 No.11, 2021
• Alaa M. Akol, Nadine Nassif, Khudhair Abbas Jaddoa, Haider M. Zwain, Kareem Radhi, Nadhir Al-Ansari
• Citations: 2 (Details)

• Comparative Semantics of Fuzzy Argumentation under the Łukasiewicz t-Norm, Engineering, Vol.14 No.1, 2022
• Shuangyan Zhao
• Citations: 2 (Details)

• Methods for Increasing the Efficiency of Cleaning the Transfer Device, Engineering, Vol.14 No.1, 2022
• Salokhiddinova Makhliyo, Muradov Rustam
• Citations: 2 (Details)

• Study of the Motion of a Weighted Cotton Ball in an Air Stream with a Known Impact Trajectory, Engineering, Vol.12 No.12, 2020
• Mamatqulov Orifjon Tursunovich, Juraeva Gulkhayo Ravshanbekovna, Kambarov Elmurod Akhmadali Ugli
• Citations: 2 (Details)

• Development of a Predictive Model to Improve the Hardness of Mild Steel Welded Joint, Engineering, Vol.13 No.4, 2021
• O. O. Ogbeide, L. M. Ebhota
• Citations: 2 (Details)

• A Nondestructive Instrumented Wheelset System for Contact Forces Measurements, Engineering, Vol.13 No.7, 2021
• Jianbin Wang, Dadi Li, Sheng Qu, Dafu Zhang
• Citations: 2 (Details)

• Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit, Engineering, Vol.13 No.6, 2021
• Yair Shneor, Vladimir Chapsky
• Citations: 2 (Details)

• Design Optimization Analysis of Venturi Tube for Medium Conveying in Strengthen Grinding Process, Engineering, Vol.13 No.8, 2021
• Jinrui Xiao, Zhongwei Liang, Xiaochu Liu, Zhuan Zhao, Xincheng Xie
• Citations: 2 (Details)

• An Evaluation of Routing Algorithms in Traffic Engineering and Quality of Service Provision of Network on Chips, Engineering, Vol.13 No.1, 2021
• Efthymios N. Lallas
• Citations: 2 (Details)

• Exploring the Efficiency of Experimental Construction of Sorting Ginned Cotton Seed Machine, Engineering, Vol.13 No.1, 2021
• Avazbek Оbidov, Muhiddin Vokhidov, Jahongir Abdurahmonov
• Citations: 2 (Details)

• Power Line Communications Networking Method Based on Hybrid Ant Colony and Genetic Algorithm, Engineering, Vol.12 No.8, 2020
• Qianghui Xiao, Huan Jin, Xueyi Zhang
• Citations: 2 (Details)

• A Qualitative Assessment of a Modified Multilevel Converter Topology M2LeC for Lightweight Low-Cost Electric Propulsion, Engineering, Vol.12 No.7, 2020
• Paul H. Riley, Obrad Dordevic, Keith Pullen, Liliana DeLilo, Massimo De Giorgio
• Citations: 2 (Details)

• Using Coarse Grain Geological Study to Predict the Origin of Sediments SW-Iraq, Engineering, Vol.12 No.4, 2020
• Abdulkadhim J. Alabidi, Tahsean F. Alkanaby, Nadhir Al-Ansari
• Citations: 2 (Details)

• Simulate New Near Equatorial Satellite System by a Novel Multi-Fields and Purposes Remote Sensing Goniometer, Engineering, Vol.12 No.6, 2020
• Hayder Dibs, Shattri Mansor, Noordin Ahmadb, Nadhir Al-Ansari
• Citations: 2 (Details)

• Fuzzy Cluster Analysis of Alzheimer’s Disease-Related Gene Sequences, Engineering, Vol.5 No.10B, 2013
• Jing Yang, Jiarui Si, Xiaoxuan Gu, Ouyan Shi
• Citations: 2 (Details)

• The 3D Computer Image of the Anterior Corneal Surface, Engineering, Vol.5 No.10B, 2013
• Bo Wang, Xueping Huang, Jinglu Ying, Mingguang Shi
• Citations: 2 (Details)

• Two Modifications of Weight Calculation of the Non-Local Means Denoising Method, Engineering, Vol.5 No.10B, 2013
• Musab Elkheir Salih, Xuming Zhang, Mingyue Ding
• Citations: 2 (Details)

• Prediction of Peptides Binding to Major Histocompatibility Class II Molecules Using Machine Learning Methods, Engineering, Vol.5 No.10B, 2013
• Fateme Kazemi Faramarzi, Majid Mohammad Beigi, Yasamin Botorabi, Najme Mousavi
• Citations: 2 (Details)

• Research of Segmentation Algorithms for Overlapping Chromosomes, Engineering, Vol.5 No.10B, 2013
• Wenzhong Yan, Lei Bai
• Citations: 2 (Details)

• Prediction Method of Protein Disulfide Bond Based on Pattern Selection, Engineering, Vol.5 No.10B, 2013
• Pengfei Sun, Yuanquan Cui, Tiankai Chen, Ying Zhao
• Citations: 2 (Details)

• Monitoring the Radiation Injury of Red Blood Cells to Micowave Radiation with Different Power Density, Engineering, Vol.5 No.10B, 2013
• Junguang Yong, Ping Ruan, Hongtao Shen
• Citations: 2 (Details)

• Experimental and Numerical Evaluation and Optimization of a Non Standard Pitot/Sampling Probe, Engineering, Vol.5 No.12, 2013
• Andrea Shmueli, Tor Erling Unander, Ole Jørgen Nydal
• Citations: 2 (Details)

• Design and Development of a Two Channel Telemedicine System for Rural Healthcare, Engineering, Vol.5 No.10B, 2013
• Mitrra Potheri Ramesh, Shruthi Balasubramanian, Varsha Vijayan, Geethanjali Balasubramanian, Mahesh Veezhinathan
• Citations: 2 (Details)

• Effects of Tube Voltage on Phase-Contrast Imaging for Different Microfocus X-Ray Tubes, Engineering, Vol.5 No.10B, 2013
• Jianbao Gui, Zhanli Hu, Peter Z. Wu, Hairong Zheng
• Citations: 2 (Details)

• Study on Multi-Exponential Inversion Method for NMR Relaxation Signals with Tikhonov Segularization, Engineering, Vol.5 No.10B, 2013
• Shanshan Chen, Hongzhi Wang, Xuelong Zhang
• Citations: 2 (Details)

• An Integrated Analysis Method for miRNA, lncRNA and mRNA Profiles Based on Their Functional and Positional Relationships, Engineering, Vol.5 No.10B, 2013
• Li Guo, Sheng Yang, Yang Zhao, Hui Zhang, Qian Wu, Feng Chen
• Citations: 2 (Details)

• Application of Criterion-Meeting Assessment Method in Fundamentals of Nursing, Engineering, Vol.5 No.10B, 2013
• Xueyan Chen, Jihong Wang, Wenjuan Li
• Citations: 2 (Details)

• Matching DSIFT Descriptors Extracted from CSLM Images, Engineering, Vol.5 No.10B, 2013
• Stefan G. Stanciu, Dinu Coltuc, Denis E. Tranca, George A. Stanciu
• Citations: 2 (Details)

• Data Fusion with Optimized Block Kernels in LS-SVM for Protein Classification, Engineering, Vol.5 No.10B, 2013
• Li Liao
• Citations: 2 (Details)

• Analysis of Switching Overvoltage in Regional Grid with Small Hydropower Plants, Engineering, Vol.5 No.9B, 2013
• Juan Chen, Haifeng Li
• Citations: 2 (Details)

• Load Cluster Characteristic Analysis and Modeling of Electric Vehicles, Engineering, Vol.5 No.9B, 2013
• Dan Zeng, Ke Wang, Yaping Li, Xiaorui Guo, Xiao Jiang
• Citations: 2 (Details)

• Capacity Worth of Energy Storage System in Renewable Power Generation Plant, Engineering, Vol.5 No.9B, 2013
• Jinbin Li, Yao Yao
• Citations: 2 (Details)

• An Enhanced Remote User Authentication Scheme, Engineering, Vol.6 No.6, 2014
• Xiaohui Yang, Xinchun Cui, Zhenliang Cao, Ziqiang Hu
• Citations: 2 (Details)

• A Cooperation-Aware Scheme for Overcoming the Traffic Congestion in the Deployment of WSNs, Engineering, Vol.6 No.4, 2014
• Yu-Hsing Chien, Joy Iong-Zong Chen, Bo-Hui Lee, Wen Bin Wu, Chieh Wen Liou
• Citations: 2 (Details)

• Identification of Bridge Movement Mechanisms, Engineering, Vol.6 No.9, 2014
• Matthew T. Yarnold
• Citations: 2 (Details)

• Active Control Method for Critical Cornering Range, Engineering, Vol.6 No.8, 2014
• Takahiko Yoshino, Hiromichi Nozaki
• Citations: 2 (Details)

• Variable Gear Ratio Control Using Vehicle Body Slip Angle, Engineering, Vol.6 No.8, 2014
• Takahiko Yoshino, Hiromichi Nozaki
• Citations: 2 (Details)

• Thermodynamic Fit Functions of the Two-Phase Fluid and Critical Exponents, Engineering, Vol.6 No.12, 2014
• Albrecht Elsner
• Citations: 2 (Details)

• Analytic Solution of MHD Stagnation Point Flow over a Stretching Permeable Surface with Effects of Viscous Dissipation and Joule Heating, Engineering, Vol.6 No.12, 2014
• Satyaban Panigrahi, Motahar Reza
• Citations: 2 (Details)

• Deformation Characteristics of Mono Strand Anchor Head, Engineering, Vol.6 No.12, 2014
• Sung Tae Kim, Jeong-Rae Cho, Keunhee Cho, Sung Yong Park, Young-Hwan Park
• Citations: 2 (Details)

• Finite Element Analysis for Groove Wander Prediction of Passenger Car Tires with the Longitudinal Tread Grooves, Engineering, Vol.8 No.1, 2016
• Kyoung Moon Jeong, Sung Ju Kang, Hyoung Seok Kim, Kee Woon Kim
• Citations: 2 (Details)

• Performance Improvement for Sisal Waste Anaerobic Biodegradation by Digester Redesign and Feed Size Reduction, Engineering, Vol.7 No.9, 2015
• Yusufu Risasi Rajabu, Samwel Victor Manyele
• Citations: 2 (Details)

• Influences of Interfacial Shear in Turbulent Film Boiling on a Horizontal Tube with External Flowing Liquid, Engineering, Vol.7 No.11, 2015
• Hai-Ping Hu
• Citations: 2 (Details)

• Thermodynamic Equilibrium of the Saturated Fluid with a Free Surface Area and the Internal Energy as a Function of the Phase-Specific Volumes and Vapor Pressure, Engineering, Vol.7 No.9, 2015
• Albrecht Elsner
• Citations: 2 (Details)

• The Suitability of Typhoon Disaster Reconstruction Work Planning—A Case of Meizuolyu Stream in Taitung County, Engineering, Vol.7 No.5, 2015
• Shu-Tzu Chen, Hung-Ming Shu, Shin-Yi Dai, Jie-Ming Huang, Chung-Li Hsu
• Citations: 2 (Details)

• Pressure Surge Dependence on Valve Operations in a Pipeline Loading System, Engineering, Vol.7 No.6, 2015
• Barinaadaa Thaddeus Lebele-Alawa, Felix Ezekiel Oparadike
• Citations: 2 (Details)

• A Hybrid Diagnosis Approach on Transformer’s Insulating Oil, Engineering, Vol.7 No.4, 2015
• Ming-Jong Lin
• Citations: 2 (Details)

• Petroleum Patent Used Such Monitoring Technological Like Innovation Process of Drilling Fluids with Xanthan Gum —World Panorama, Engineering, Vol.7 No.7, 2015
• Marco Antonio Martins de Oliveira, Cheila Gonçalves Mothé, Leandra Guimarães de Oliveira
• Citations: 2 (Details)

• A New Method for the Dynamic Reserves of Gas Condensate Reservoir Using Cyclic Gas Injection Based on the Effects of Reinjection Ratio and Water Influx, Engineering, Vol.7 No.7, 2015
• Yu Xiong, Ling Wang, Zhongqian Zhu, Wei Xie
• Citations: 2 (Details)

• Effect of Velocity of Impact on Mechanical Properties and Microstructure of Medium Carbon Steel during Quenching Operations, Engineering, Vol.7 No.7, 2015
• Joseph Babalola Agboola, Oladiran Abubakre Kamardeen, Edeki Mudiare, Michael Bolaji Adeyemi
• Citations: 2 (Details)

• Reference Coordinate System of Nonlinear Beam Element Based on the Geometrically Exact Formulation under Large Spatial Rotations and Deformations, Engineering, Vol.3 No.1, 2011
• Kyoung-Chan Lee, Sung-Pil Chang, Jung-Il Park, Sung-Bo Kim
• Citations: 2 (Details)

• Research on Irradiation Electric Field for Charged Particles Beam with High Energy, Engineering, Vol.3 No.1, 2011
• Jianping Shi, Yijia Tang, Lingli Zhan, Hongjian Liu, Xunan Chen
• Citations: 2 (Details)

• Causes of Cracks on Structures in Ngara-Tanzania, Engineering, Vol.2 No.12, 2010
• Fikiri Fredrick Magafu, Wu Li
• Citations: 2 (Details)

• A Non-Dimensional Consideration in Combustor Axial Stress Computations, Engineering, Vol.2 No.9, 2010
• Ebene Ufot, Barinaadaa Thaddeus Lebele-Alawa, Ibiba Emmanuel Douglas, Kelvin D. H. Bob-Manuel
• Citations: 2 (Details)

• A General Calculating Method of Rotor’s Torsional Stiffness Based on Stiffness Influence Coefficient, Engineering, Vol.2 No.9, 2010
• Danmei Xie, Wangfan Li, Ling Yang, Yong Qian, Xianbo Zhao, Zhigang Gao
• Citations: 2 (Details)

• Effect of Periodic Variation of Sol-air Temperature on the Performance of Integrated Solar Collector Storage System, Engineering, Vol.2 No.10, 2010
• Nawaf H. Saeid, Tan Jun Wong
• Citations: 2 (Details)

• The Research on Adaptive Control Modeling of a Liquid Fertilizer Spreader, Engineering, Vol.2 No.2, 2010
• Z.D. Yang
• Citations: 2 (Details)

• Microstructures and Properties of Recycled Composites – Particle Reinforced Iron Matrix Functionally Graded Materials Fabricated by Centrifugal Casting, Engineering, Vol.2 No.5, 2010
• Yanpei Song, Shuangxu Bi, Xiuqing Li
• Citations: 2 (Details)

• A Non-Linear 3D FEM to Simulate Un-Bonded Steel Reinforcement Bars under Axial and Bending Loads, Engineering, Vol.1 No.2, 2009
• Rami HAWILEH, Adeeb RAHMAN, Habib TABATABAI
• Citations: 2 (Details)

• Hierarchical Coordinated Control for Power System Voltage Using Linear Temporal Logic, Engineering, Vol.1 No.2, 2009
• Hongshan ZHAO, Hongliang GAO, Yang XIA
• Citations: 2 (Details)

• Computer Aided Modeling and Deign of a New Magnetic Sealing Mechanism in Engineering Applications, Engineering, Vol.2 No.1, 2010
• Z. LI
• Citations: 2 (Details)

• Experimental Analysis of Heat Transfer Behavior inside Heat Pipe Integrated with Cooling Plates, Engineering, Vol.3 No.9, 2011
• Chen-Ching Ting, Chien-Chih Chen
• Citations: 2 (Details)

• The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5, Engineering, Vol.3 No.9, 2011
• Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad
• Citations: 2 (Details)

• The Simple Model for Bolted Connections in Fire, Engineering, Vol.3 No.9, 2011
• Mahmoud Yahyai, Mohsen Behzadpoori, Amir Saedi Daryan, Ahmad Baleh Moghadas
• Citations: 2 (Details)

• Analysis of the Spectral Resolution of a TeO2 based Noncollinear Acousto-Optic Tunable Filter, Engineering, Vol.3 No.3, 2011
• Chunguang Zhang, Hao Wang, Yishen Qiu
• Citations: 2 (Details)

• Unsupervised Segmentation Method of Multicomponent Images based on Fuzzy Connectivity Analysis in the Multidimensional Histograms, Engineering, Vol.3 No.3, 2011
• Sié Ouattara, Georges Laussane Loum, Alain Clément
• Citations: 2 (Details)

• Theoretical Basis in Regression Model Based Selection of the Most Cost Effective Parameters of Hard Rock Surface Mining, Engineering, Vol.3 No.2, 2011
• Antipas T. S. Massawe, Karim R. Baruti, Paul S. M. Gongo
• Citations: 2 (Details)

• Characteristic Analysis and Comprehensive Control for the Horizontal Stripes of High-Grade Automotive Panels in Continuous Annealing, Engineering, Vol.3 No.2, 2011
• Zhenhua Bai, Xiaodong Shi, Yanzhi Shen, Hongxin Si, Li Zhou, Shunbing Yu
• Citations: 2 (Details)

• The Influence of Microscopic Fungi on Chromated Galvanized Zinc Coatings, Engineering, Vol.2 No.12, 2010
• Albinas Lugauskas, Igoris Prosyčevas, Aušra Selskienė, Irina Demčenko, Algirdas Narkevičius, Dalia Bučinskienė, Elena Binkauskienė
• Citations: 2 (Details)

• A Combined Probabilistic and Optimization Approach for Improved Chemical Mixing Systems Design, Engineering, Vol.3 No.6, 2011
• Matthew J. Opgenorth, William E. McDermott, Peter Laz, Corinne S. Lengsfeld
• Citations: 2 (Details)

• Analytical Solution for Bending Stress Intensity Factor from Reissner’S Plate Theory, Engineering, Vol.3 No.5, 2011
• Lalitha Chattopadhyay
• Citations: 2 (Details)

• Computational Analysis of Flow Field on the Propulsion Nozzle of a Micro-Turbojet Engine, Engineering, Vol.4 No.1, 2012
• Jorge Luis Garrido-Téllez, Miguel Toledo-Velázquez, Samuel Alcántara-Montes, José Ángel L. Ortega-Herrera, Arturo Reyes-León
• Citations: 2 (Details)

• Environments Aware for Prolonging the Lifetime of Sensor Nodes Deployed in WSNs, Engineering, Vol.4 No.2, 2012
• Joy Iong-Zong Chen, Lu-Tsou Yeh
• Citations: 2 (Details)

• Enhancement of Ride Quality of Quarter Vehicle Model by Using Mixed H2/H with Pole-Placement, Engineering, Vol.4 No.2, 2012
• A. S. Emam, A. M. Abdel Ghany
• Citations: 2 (Details)

• Unsteady Spillway Flows by Singular Integral Operators Method, Engineering, Vol.4 No.3, 2012
• Evangelos G. Ladopoulos
• Citations: 2 (Details)

• An Experimental Study for Construction of Emergency Spillway in Daechung Dam, Engineering, Vol.4 No.9, 2012
• Hongkoo Yeo, Joongu Kang, Sanghwa Jung
• Citations: 2 (Details)

• Design and Multicriteria Optimization of a Two-Stage Reactive Extrusion Process for the Synthesis of Thermoplastic Polyurethanes, Engineering, Vol.4 No.9, 2012
• Sandrine Hoppe, Dimitrios Meimaroglou, Mauricio Camargo, Christian Fonteix, Fernand Pla
• Citations: 2 (Details)

• Design of DC-DC Converter for Flash Memory IPs, Engineering, Vol.5 No.1B, 2013
• Li-yan Jin, Woo-Young Jung, Ji-Hye Jang, Min-Sung Kim, Myeong-Seok Kim, Heon Park, Pan-Bong Ha, Young-Hee Kim
• Citations: 2 (Details)

• Liquid Phase Catalytic Oxidation of Aqueous Solutions That Contain Organic Matter in a Trickle-Bed Reactor, Engineering, Vol.5 No.1, 2013
• Canan Uraz, Suheyda Atalay
• Citations: 2 (Details)

• Study on Thin Layer Drying of Rosa laevigata Michx, Engineering, Vol.5 No.1, 2013
• Bing Lin, Ying Wang, Ying Zhou, Zhi Zhao
• Citations: 2 (Details)

• PC-Based Automated Control System for Jordan Northern Grain Silo, Engineering, Vol.4 No.12, 2012
• Salem Y. Al-Agtash
• Citations: 2 (Details)

• A Simple Detection System for Two Classical Sagnac Interferometer Configurations, Engineering, Vol.4 No.12, 2012
• Gabriel Eduardo Sandoval-Romero, Enrique Francisco Pinzón-Escobar
• Citations: 2 (Details)

• Rolling Fatigue Test of Large-Sized UHPC Member for Cable Stayed Bridge, Engineering, Vol.4 No.10, 2012
• Jeong-Rae Cho, Young Jin Kim, Jong Sup Park, Eun Suk Choi, Won Jong Chin
• Citations: 2 (Details)

• Using Stochastic Colored Petri nets for Designing Multi-Purpose Plants, Engineering, Vol.4 No.10, 2012
• Hasan Hosseini-Nasab, Ali Sadri
• Citations: 2 (Details)

• Continuously Monitoring Foetal ECG using Mobile Telemedicine Sensor Network, Engineering, Vol.5 No.5B, 2013
• Mahmoud Ahmed Suliman Ali
• Citations: 2 (Details)

• Application of LED Type Lamps in Domestic and Public Utilities and Gain Capability to Run New Small Investments in Rwanda, Engineering, Vol.5 No.10, 2013
• Mukundufite Fabien
• Citations: 2 (Details)

• Development of Optimal Structural System for Hybrid Cable-Stayed Bridges Using Ultra High Performance Concrete, Engineering, Vol.5 No.9, 2013
• Hee Seok Kim, Young Jin Kim, Won Jong Chin, Hyejin Yoon
• Citations: 2 (Details)

• Comparisons of Oil Production Predicting Models, Engineering, Vol.5 No.8, 2013
• Yishen Chen, Xianfeng Ding, Haohan Liu, Yongqin Yan
• Citations: 2 (Details)

• Approximate Analytical Solution to Temperature Profile in a Solid Composite Heated by a Pulsed Laser, Engineering, Vol.5 No.5, 2013
• Sani Jibrin, Mohd Maarof Moksin, Mohd Shahril Husin, Mohammed Yusuf Waziri, Azmi Bin Zakaria, Zainal Abidin Bin Talib
• Citations: 2 (Details)

• Higher-Order WHEP Solutions of Quadratic Nonlinear Stochastic Oscillatory Equation, Engineering, Vol.5 No.5A, 2013
• Mohamed A. El-Beltagy, Amnah S. Al-Johani
• Citations: 2 (Details)

• Anticancer Gene-engineered MSC-mediated Cancer Cell Death: An Imaging Demonstration, Engineering, Vol.4 No.10B, 2012
• Xu-Yong Sun, Zhuang Chen, Mani R. Moniri, Hong Lu, Long-Jun Dai, Garth L. Warnock
• Citations: 2 (Details)

• A Novel Apparatus for Surveillance of Green Energy System Based on WSSs, Engineering, Vol.5 No.1A, 2013
• Joy I. -Z. Chen, Yue Hsin Gien, Wen Bin Wu, Chieh Wen Liou
• Citations: 2 (Details)

• Macroscopic Structural Analysis on a 10 kW Class Lab-Scale Process Heat Exchanger Prototype under a High-Temperature Gas Loop Condition, Engineering, Vol.5 No.1A, 2013
• Kee-Nam Song, Sung-Deok Hong, Hong-Yoon Park
• Citations: 2 (Details)

• The Dynamic-to-Static Conversion of Dynamic Fault Trees Using Stochastic Dependency Graphs and Stochastic Activity Networks, Engineering, Vol.5 No.2, 2013
• Gabriele Manno, Ferdinando Chiacchio, Francesco Pappalardo
• Citations: 2 (Details)

• Correction of Disorders in Tissue Perfusion, Blood Coagulation and Fibrinolysis with Orbita Apparatus on Terahertz Waves of Cell Metabolites, Engineering, Vol.5 No.2, 2013
• Vaycheslav Kirichuk, Alexander Tsymbal, Alexey Ivanov, Evgeniy Andronov, Tatyana Kiriyazi, Svetlana Parshina, Natalia Babichenko, Liliana Tokaeva
• Citations: 2 (Details)

• Evaluation on Ecological Environment of City Based on Entropy and Dissipative Structure Theory—In Case of Dangyang in Hubei Province, Engineering, Vol.5 No.2, 2013
• Ximing Sun, Xia Liu
• Citations: 2 (Details)

• Microchip Electrode Development for Traveling wave Dielectrophoresis of Non-Spherical Cell Suspensions, Engineering, Vol.4 No.10B, 2012
• Sakshin Bunthawin, Jatuporn Kongklaew, Adisorn Tuantranont, Kata Jaruwongrangsri, Thitima Maturos
• Citations: 2 (Details)

• MS-HRM to Detect Serum DNA Methylation of Intrauterine Growth Retardation Children, Engineering, Vol.4 No.10B, 2012
• Yan Du, Youxia Zhou, Qian Wu
• Citations: 2 (Details)

• Motor Imagery did not Improve Strength of Biceps Brachii, Engineering, Vol.4 No.10B, 2012
• Lanxiang He, Zhijun Tian
• Citations: 1 (Details)

• Engineering Antibody Fragment with the Quantum Dot in Cancer Cell Imaging and Diagnosis, Engineering, Vol.4 No.10B, 2012
• Lizhi Liu, Weiming Xu
• Citations: 1 (Details)

• Functional analysis of OAT gene in Aspergillus Niger, Engineering, Vol.4 No.10B, 2012
• Chuang Zhou, Xihong He, Hao Liu
• Citations: 1 (Details)

• The omp2 Gene of HPS-type Bacteria Cloning and Sequence Analysis Isolates from Sichuan Province, Engineering, Vol.4 No.10B, 2012
• Lirui Li, Zexiao Yang, Yin Wang, Qiu Jin, Xulong Wu, Rongchang Zhang
• Citations: 1 (Details)

• Mathematical Modeling of Hemoglobin Release under Hypotonic Conditions, Engineering, Vol.4 No.10B, 2012
• Ivana Pajic-Lijakovic, Branko Bugarski, Milenko Plavsic
• Citations: 1 (Details)

• The COP9 Signalosome Controls Adipocyte Differentiation by Regulating CHOP Protein Stability, Engineering, Vol.4 No.10B, 2012
• Xiaohua Huang, Wolfgang Dubiel
• Citations: 1 (Details)

• Annual Maximum Loads Estimation Modeling for Kingdom of Bahrain, Engineering, Vol.5 No.1B, 2013
• Isa S. Qamber
• Citations: 1 (Details)

• Two Temperature Heat Flux of Semi Infinite Piezoelectric Ceramic Rod, Engineering, Vol.5 No.3, 2013
• Essam Bassiouny, Refaat Sabry, Hamdy Youssef
• Citations: 1 (Details)

• Method of Power Generation after Hydrogen is Produced with Piggery Wastewater, Engineering, Vol.4 No.10B, 2012
• Matsunori Nara, Xiaoyi Zhao
• Citations: 1 (Details)

• Simulation of Ultra-slow Oscillations Using the Integrate and Fire Neuron Model, Engineering, Vol.4 No.10B, 2012
• Danny Ng, MokSiew -Ying, Chan Siow -Cheng, Goh Sing -Yau
• Citations: 1 (Details)

• Ultrasound Mediated Delivery of Liposomal Doxorubicin in Mice with Glioma, Engineering, Vol.4 No.10B, 2012
• Feng-Yi Yang, Shih-Cheng Horng
• Citations: 1 (Details)

• Application of Mammary Gland Endoprosthesis without a Shell in Modern Oncomammological Practice, Engineering, Vol.4 No.10B, 2012
• S. D. Myasoyedov, D. V. Myasoyedov, P. S. Moiseyev
• Citations: 1 (Details)

• Adaptive Filter for High Dimensional Inverse Engineering Problems: From Theory to Practical Implementation, Engineering, Vol.5 No.5A, 2013
• Hong Son Hoang, Rémy Barailles
• Citations: 1 (Details)

• Finite Element Modeling of Stability of Beam-Column Supports for Field Fabricated Spherical Storage Pressure Vessels, Engineering, Vol.5 No.5, 2013
• Oludele Adeyefa, Oluleke Oluwole
• Citations: 1 (Details)

• Conceptual Design of Hybrid Cable-Stayed Bridge with Central Span of 1000 m Using UHPC, Engineering, Vol.5 No.9, 2013
• Hyejin Yoon, Won Jong Chin, Hee Seok Kim, Moon Seoung Keum, Young Jin Kim
• Citations: 1 (Details)

• Effect of Temperature and the Organic Phase Content on the Stripping of Mn(II) from a D2EPHA-KEROSENE Pseudo-Emulsion Using a Sulfuric Acid Aqueous Solution, Engineering, Vol.4 No.11, 2012
• Jaime Cristobal Rojas-Montes, Roberto Pérez-Garibay, Alejandro Uribe-Salas, Fabiola Nava-Alonso
• Citations: 1 (Details)

• Burst Error Correction Method Based on Arithmetic Weighted Checksums, Engineering, Vol.4 No.11, 2012
• Saleh Al-Omar, Atef Obeidat
• Citations: 1 (Details)

• Analyzing Some Behavior of a Beam with Different Crack Positions Transversely inside It, Engineering, Vol.5 No.1, 2013
• Behrooz Yazdizadeh
• Citations: 1 (Details)

• Experimental Study on the Ultimate Shear Performance of Elastomeric Bearings of Doublefold Elastomeric Layer, Engineering, Vol.5 No.1, 2013
• Hyejin Yoon, Im Jong Kwahk, Young Jin Kim
• Citations: 1 (Details)

• Development of Fault Management Dispatcher Training Simulator for TDAS in Korea, Engineering, Vol.5 No.1B, 2013
• In-Yong Seo, Sang-Ok Kim, Bok-Nam Ha
• Citations: 1 (Details)

• A Parallel Processing Uninterruptible Power Supply for Sudden Voltage Fluctuation for Power Management, Engineering, Vol.5 No.1B, 2013
• Sung-Hun Ko, Seong-Ryong Lee
• Citations: 1 (Details)

• Overall Framework and Module of Distribution Network Coordinated Planning Considering Distributed Generation, Engineering, Vol.5 No.1B, 2013
• Qianjin LIU, Huanghuang LIU
• Citations: 1 (Details)

• A Gain Scheduled Method for Speed Control of Wind Driven Doubly Fed Induction Generator, Engineering, Vol.5 No.1B, 2013
• Wei Wang, Kang-Zhi Liu, Tadanao Zanma
• Citations: 1 (Details)

• The Research about the Trans-provincial Centralized Bidding Trading Market of East China Power Grid --I：Empirical Analysis, Engineering, Vol.5 No.1B, 2013
• Bin Zou, Xiao-Jun Wang, Xiao-Gang Li, Li-Bing Yang
• Citations: 1 (Details)

• The Discussion of 500kv Centralized Monitoring System For Large Operation and Large Maintenance Mode, Engineering, Vol.5 No.1B, 2013
• lingling Shuai, Xiaojiang Liu, Jun Li
• Citations: 1 (Details)

• Fast CR-SRAM Using New Charge-Recycling Scheme, Engineering, Vol.4 No.8, 2012
• Leilei Li, Xin Chen, Xu Wang
• Citations: 1 (Details)

• A New Closure to Slice Model for Slope Stability Analysis, Engineering, Vol.4 No.7, 2012
• Tianyun Liu, Yunling Duan, Chongbin Zhao
• Citations: 1 (Details)

• Experimental Study on Local Scour in the Downstream Area of Low Drop Structure Types, Engineering, Vol.4 No.8, 2012
• Changsung Kim, Joongu Kang, Hongkoo Yeo
• Citations: 1 (Details)

• On the Dynamic Behavior of Town Gas Pipelines, Engineering, Vol.4 No.1, 2012
• Aly El-Kafrawy
• Citations: 1 (Details)

• Modification and Development of a Blow Molding Machine, Engineering, Vol.4 No.4, 2012
• Bassam A. Al-Helou
• Citations: 1 (Details)

• Finite Element Modelling of Insulation Thicknesses for Cryogenic Products in Spherical Storage Pressure Vessels, Engineering, Vol.4 No.6, 2012
• Oludele Adeyefa, Oluleke Oluwole
• Citations: 1 (Details)

• Experimental and Numerical Study of the Effect of Surround Protection Technique on the Strain Measurement for Offshore Jacket Platform, Engineering, Vol.3 No.5, 2011
• Yongjun Xu
• Citations: 1 (Details)

• Cambering of Four High Cold Mill with the View of Reducing Roller Ends Contact and Preventing Complex Waves, Engineering, Vol.3 No.4, 2011
• Zhenhua Bai, Hongxin Si, Xiaodong Shi, Qingtian Zhou
• Citations: 1 (Details)

• Power as Resource-Power as Discourse: An Overview Evaluation of the Key-Factors of “Wind Farms” and “Riparian Rights” as Sources of Power, Engineering, Vol.3 No.1, 2011
• Grigorios L. Kyriakopoulos
• Citations: 1 (Details)

• The Research of the Flow of Bodies with Use of the Vector Form of the Newton’s Law for the Viscous Liquid, Engineering, Vol.3 No.2, 2011
• Andrey N. Volobuev, Eugene S. Petrov
• Citations: 1 (Details)

• Mathematical Modelling in Placing of Fresh Concrete, Engineering, Vol.3 No.3, 2011
• Ahmet Bilgil
• Citations: 1 (Details)

• Modeling the Impact of Mine and Country Variations on the Cost and Country-Benefit of Gold Mining, Engineering, Vol.3 No.2, 2011
• Karim Baruti, Antipas T. S. Massawe, Beatus Alois Kundi
• Citations: 1 (Details)

• Rehabilitation of an Existing Office Block, Engineering, Vol.3 No.9, 2011
• Tomasz Blaszczynski, Jacek Wdowicki
• Citations: 1 (Details)

• Diagnosis on Surface Failure in Gear Equipment Using Time - Frequency Domain Analysis, Engineering, Vol.3 No.8, 2011
• Yuji Ohue, Toshiya Kounou, Katsuhiko Yazama
• Citations: 1 (Details)

• Development of Roller Ends Forced-Contact Model and Cambering Technology for UCM Temper Mill (II)——Development of cambering technology for UCM temper mill, Engineering, Vol.3 No.7, 2011
• Zhenhua Bai, Xiaodong Shi, Hongxin Si, Linfang Han, Ruibing Long, Shoumin Wu, Xiujun Li, Dongdong Zhang
• Citations: 1 (Details)

• The Bending of Rectangular Deep Beams with Fixed at Both Ends under Uniform Load, Engineering, Vol.3 No.12, 2011
• Ying-jie Chen, Bao-lian Fu, Gang Li, Jie Wu, Ming Bai, Xia Chen
• Citations: 1 (Details)

• Decay of Vortices in an Electrically Conducting Fluid in the Presence of a Magnetic Field, Engineering, Vol.3 No.12, 2011
• Motahar Reza, Satyaban Panigrahi, Anadi Sankar Gupta
• Citations: 1 (Details)

• Maneuvering Multi-target Tracking Algorithm Based on Modified Generalized Probabilistic Data Association, Engineering, Vol.3 No.12, 2011
• Zhentao Hu, Chunling Fu, Xianxing Liu
• Citations: 1 (Details)

• The Quantized Characterization of Cooked Rice Hardness and Research on the Automatic Measurement Technology, Engineering, Vol.2 No.2, 2010
• N. Jiang, Y. Gao, J.P. Zhou, L.Q. Gao, J.H. Zhou, Q.G. Dai
• Citations: 1 (Details)

• Analytic Computation Method of the Equivalent Thickness of Superposition Multi-Throttle-Slices of Twin-Tubes Shock Absorber, Engineering, Vol.2 No.2, 2010
• C.C. Zhou, Y.Z. Xu
• Citations: 1 (Details)

• Quasi-Square Wave Mode Phase-Shifted PWM LCC Resonant Converter for Regulated Power Supply, Engineering, Vol.1 No.3, 2009
• S. PADMANABHAN, Y. SUKHI, Y. JEYASHREE
• Citations: 1 (Details)

• Electronic Ratchet Nanodiodes, Engineering, Vol.1 No.2, 2009
• Kunyuan XU, Gang WANG
• Citations: 1 (Details)

• Fabrication of Si-PDMS Low Voltage Capillary Electrophoresis Chip, Engineering, Vol.1 No.2, 2009
• Wenwen GU, Zhiyu WEN, Zhongquan WEN, Yi XU, Fengfei LIANG, Xiaoguo HU
• Citations: 1 (Details)

• Optimal Power Allocation Strategy for TBLAST Based 4G Systems, Engineering, Vol.1 No.2, 2009
• Wu YIN, Pei XIAO
• Citations: 1 (Details)

• Structural Analysis and Optimal Design for Water Tube Panel in an Alkali Recovery Boiler, Engineering, Vol.2 No.5, 2010
• Zaili Zhao, Jinsheng Xiao, Ying Wu, Xiaojun Zhang, Zhiming Wang
• Citations: 1 (Details)

• Research on Early Fault Self-Recovery Monitoring of Aero-Engine Rotor System, Engineering, Vol.2 No.1, 2010
• Z.S. WANG, S.W. MA
• Citations: 1 (Details)

• Algorithms for Masking Pixel Defects at Low Exposure Conditions for CMOS Image Sensors, Engineering, Vol.2 No.4, 2010
• Vinesh Sukumar, Jason Tanner, Atif Sarwari, Herbert L Hess
• Citations: 1 (Details)

• Geometric Inversion of Two-Dimensional Stokes Flows – Application to the Flow between Parallel Planes, Engineering, Vol.2 No.10, 2010
• Mustapha Hellou
• Citations: 1 (Details)

• A Novel Method of Fruit Raw Material Reprocessing, Engineering, Vol.2 No.12, 2010
• Alexander A. Emelyanov, Konstantin A. Emelyanov
• Citations: 1 (Details)

• A Novel Part-Winding Starting Method for 4-Pole Squirrel Cage Induction Motor, Engineering, Vol.2 No.6, 2010
• Vadugapalayam Ponnuvel Sakthivel, Ramachandran Bhuvaneswari, Srikrishna Subramanian
• Citations: 1 (Details)

• Behaviour of a Composite Concrete-Trapezoidal Steel Plate Slab in Fire, Engineering, Vol.2 No.8, 2010
• Tomaž Hozjan, Miran Saje, Igor Planinc, Stanislav Srpčič, Sebastjan Bratina
• Citations: 1 (Details)

• Investigation of Stator Wake Variability in Single Stage Axial-Compressor, Engineering, Vol.2 No.7, 2010
• Xiaorong Xiang, Bo Liu, Liqing Qiao, Qingwei Wang
• Citations: 1 (Details)

• Flipped Voltage Follower Ddesign Technique for Maximised Linear Operation, Engineering, Vol.2 No.8, 2010
• Ching-Mei Chen, Khaled Hayatleh, Bryan Hart, John Lidgey
• Citations: 1 (Details)

• A New Motor of Stick Type with Coupled Mechanical Vibration of Bimorph Beam and Frictional Force, Engineering, Vol.7 No.7, 2015
• Hiroyuki Yaguchi
• Citations: 1 (Details)

• Ground Subsidence Following Groundwater Drawdown by Excavating of 500 m Deep Investigation Shafts in Granite Body in Mizunami, Central Japan in 2004-2012, Engineering, Vol.7 No.7, 2015
• Fumiaki Kimata, Yasuhiro Asai, Ryo Honda, Toshiyuki Tanaka, Hiroshi Ishii, Rikio Miyajima
• Citations: 1 (Details)

• Application Study on Rigidity Correlation Method for Density Inversion of Rockfill, Engineering, Vol.7 No.6, 2015
• Pan Liu, Mingjie Zhao, Bowen Jiang, Kui Wang, Peng Jin
• Citations: 1 (Details)

• Experimental Study on Ice Slurry Refrigeration System with Pre-Cooling Heat Exchanger, Engineering, Vol.7 No.5, 2015
• Xukai Yang, Shengchun Liu
• Citations: 1 (Details)

• Results and Prospects of Experimental Validation of the Use of Electromagnetic Waves at Terahertz Frequencies of Cellular Metabolites in Clinical Practice, Engineering, Vol.7 No.5, 2015
• V. F. Kirichuk
• Citations: 1 (Details)

• Equivalent Rigidity at the Minor Axis of Concrete Hollow Slab Based on Continuity Analysis, Engineering, Vol.7 No.9, 2015
• Ronglan Zhang
• Citations: 1 (Details)

• A Study on Configuration and Integration of Sub-Systems to System-of-Systems with Rule Verification, Engineering, Vol.7 No.10, 2015
• Tim Warnecke
• Citations: 1 (Details)

• Real-Time Detection of Unstable Control Loop Behavior in a Feedback Active Noise Cancellation System for In-Ear Headphones, Engineering, Vol.7 No.12, 2015
• Sven Höber, Christian Pape, Eduard Reithmeier
• Citations: 1 (Details)

• Study on Rolling Characteristics of the Projectile with Wide-Angle Oblique Empennages, Engineering, Vol.8 No.2, 2016
• Bobo Zhao, Rongzhong Liu, Rui Guo, Lei Liu, Liang Chen
• Citations: 1 (Details)

• Mobile Detecting Robot Controlled by Smartphone Based on iOS, Engineering, Vol.6 No.12, 2014
• Hou-Tsan Lee, Hsiang-Lin Tsai, Zhong-Quan Chen, Yu-Ting Jiang
• Citations: 1 (Details)

• A Study on Physical Model Test for Cheongpyeong Dam Discharge Recalculation, Engineering, Vol.6 No.11, 2014
• Joongu Kang, Sungjoong Kim, Hongkoo Yeo
• Citations: 1 (Details)

• A Study on the Wave Screening Effectiveness According to Trench Dimensions Using Ultrasonic Waves, Engineering, Vol.6 No.10, 2014
• Hee Seok Kim, Won Jong Chin
• Citations: 1 (Details)

• Compatibility of the Active Inductance Double Resonance Quartz Oscillator with Q-MEMS Temperature Sensor, Engineering, Vol.7 No.2, 2015
• Tetsuya Akitsu, Akira Kudo, Tomio Sato
• Citations: 1 (Details)

• Simultaneous Multimode Oscillation of Stress-Compensated Cut Quartz Resonator with Narrow-Band Wide Variable-Range Quartz Crystal Oscillator, Engineering, Vol.6 No.13, 2014
• Tomio Sato, Tetsuya Akitsu
• Citations: 1 (Details)

• Traffic Dynamics and Congested Phases Derived from an Extended Optimal-Velocity Model, Engineering, Vol.6 No.8, 2014
• Makoto Watanabe
• Citations: 1 (Details)

• A Quick Classification Method of the Power Quality Disturbances, Engineering, Vol.6 No.7, 2014
• Yi Yi Tang, Hao Liu
• Citations: 1 (Details)

• A New Type of a Magnetic Plane Motor Coupled Mechanical Vibration with Electromagnetic Force, Engineering, Vol.6 No.9, 2014
• Hiroyuki Yaguchi, Kazuya Iino, Takaaki Eguchi
• Citations: 1 (Details)

• Material Conformity and Bactericidal Characteristics of High-Density Ozone Disinfection in Vinyl Polysiloxane Impression and PMMA Dentistry Fillings, Engineering, Vol.6 No.7, 2014
• Hiroshi Ohkawa, Tetsuya Akitsu
• Citations: 1 (Details)

• Load-Measuring Pot Bearing with Built-In Load Cell —Part II: Fatigue Performance and Experimental Temperature Correction, Engineering, Vol.5 No.11, 2013
• Jeong-Rae Cho, Young Jin Kim, Jong-Won Kwark, Sung Yong Park, Won Jong Chin, Byung-Suk Kim
• Citations: 1 (Details)

• Monte Carlo Simulation and a Review of the Physics of the Positron Annihilation Process in PET, Engineering, Vol.5 No.10B, 2013
• Hamed Hamid Muhammed, Ziya Zengin
• Citations: 1 (Details)

• Human Care Theory and Influences on the Life Quality Index of Cancer Patients in Household Life, Engineering, Vol.5 No.10B, 2013
• Yali Sun, Ling Gao, Ying Dong, Ling Gong
• Citations: 1 (Details)

• Cell Segmentation and Tracking in Microfluidic Platform, Engineering, Vol.5 No.10B, 2013
• Lipan Ouyang, Jiandong Wu, Michael Zhang, Francis Lin, Simon Liao
• Citations: 1 (Details)

• Design of Real-Time Document Control Based on Zigbee and Surface Electromyography (sEMG), Engineering, Vol.5 No.10B, 2013
• Zhen Wang, Bei Wang, Xingyu Wang
• Citations: 1 (Details)

• Neuroprotective Effects of Ginkgo Biloba Extract (GbE) on Oxygen-Glucose Deprivation (OGD) in PC12 Cells, Engineering, Vol.5 No.10B, 2013
• Chunli Mei, Xuelu Han, Jing Zhang, Ling Gao, Huimin Liu
• Citations: 1 (Details)

• Simulation of the Thermal and Mechanical Effects of a Planar Rectangular High Intensity Ultrasound Transducer to Be Used for Destroying Atherosclerotic Plaque, Engineering, Vol.5 No.10B, 2013
• Christakis Damianou, C. Christofi, N. Mylonas
• Citations: 1 (Details)

• Effects of Different Types of Verbal Activities on Heart Rate Variability, Engineering, Vol.5 No.10B, 2013
• Ping Shi, Youfang Fang, Hongliu Yu
• Citations: 1 (Details)

• Using Ultrasonic Spectrometry to Estimate the Stability of a Dental Implant Phantom, Engineering, Vol.5 No.10B, 2013
• Hamed Hamid Muhammed, Satya V. V. N. Kothapalli
• Citations: 1 (Details)

• Injection Scheme Optimization of Foam Profile Control on Block S103, Engineering, Vol.6 No.1, 2014
• Hongjun Yin, Chuan Liu, Meinan Wang
• Citations: 1 (Details)

• Case Study: Hydraulic Model Study for Abandoned Channel Restoration, Engineering, Vol.5 No.12, 2013
• Changsung Kim, Joongu Kang
• Citations: 1 (Details)

• Adaptive Method of Increase of Package Network Load, Engineering, Vol.5 No.12, 2013
• Alomar Saleh, Alomar Mhamad, V. M. Chuprin
• Citations: 1 (Details)

• Indoor Air Quality Study on Fiber Glass Industry, Engineering, Vol.5 No.10B, 2013
• Amir Alhaddad, Baderiya Al-Abdulmohsin
• Citations: 1 (Details)

• Isolation and Characterization of an L-Amino Acid Oxidase-Producing Marine Bacterium, Engineering, Vol.5 No.10B, 2013
• Zhiliang Yu, Hua Qiao, Juanping Qiu, Peiya Xu, Peng Li
• Citations: 1 (Details)

• Molecular Characterization and mRNA Expression of Cytochrome P450 1A1 and Cytochrome P450 3A in Liver of Kafue Lechwe (Kobus leche kafuensis) as Potential Biomarkers of Pollution of the Kafue River Basin, Zambia, Engineering, Vol.6 No.2, 2014
• Ethel M’kandawire, Michelo Syakalima, Kaampwe Muzandu, Girja Pandey, Martin Simuunza, Shouta M. M. Nakayama, Yusuke K. Kawai, Yoshinori Ikenaka, Mayumi Ishizuka
• Citations: 1 (Details)

• Charged Amino Acid Frequencies of Proteins over Macroevolutionary Time Scale, Engineering, Vol.5 No.10B, 2013
• Yu-Juan Zhang, Jian-Jun Li, You-Jin Hao, Bin Chen
• Citations: 1 (Details)

• Control Strategy of Vibrational Capsubot in Viscoelastic Environment, Engineering, Vol.5 No.10B, 2013
• Cheng Zhang, Renjia Tan, Hao Liu, Hongyi Li
• Citations: 1 (Details)

• Restoration Study of Microorganisms in Lake Water Purification, Engineering, Vol.5 No.10B, 2013
• Fang Yang, Rui Zhu
• Citations: 1 (Details)

• Stepwise Confidence Interval Method for MTD Studies with Binomial Populations, Engineering, Vol.5 No.10B, 2013
• Na Yu, Xiaoqing Tang, Hanxing Wang
• Citations: 1 (Details)

• Substitution of Deoxyinosine as Universal Base in Oligonucleotides for DNA Ligation, Engineering, Vol.5 No.10B, 2013
• Zhiliang Yu
• Citations: 1 (Details)

• The Solutions for the Eco-Epidemic Model with Homotopy Analysis Method, Engineering, Vol.5 No.10B, 2013
• Xiurong Chen
• Citations: 1 (Details)

• The Phenotypic Conversion of Macrophage Detected by FACS in EAE Mice Treated with or without Fasudil, Engineering, Vol.5 No.10B, 2013
• Chunyun Liu, Yong Xie, Yanhua Li, Jiezhong Yu, Ling Feng, Shaowei Hou, Haifei Zhang, Cungen Ma, Baoguo Xiao
• Citations: 1 (Details)

• Developing Customized Evaluation Software for Clinical Trials: An Example with Obstructive Lung Diseases, Engineering, Vol.5 No.10B, 2013
• Zhanqi Zhao, Barbara Vogt, Inéz Frerichs, Ullrich Müller-Lisse, Knut Möller
• Citations: 1 (Details)

• Bone Regeneration Enhanced by Antigen-Extracted Xenogeneic Cancellous Bone Graft with rhBMP-2 in Rabbits Mandibular Defect Repair, Engineering, Vol.5 No.10B, 2013
• Renfa Lai, Zejian Li, Ye Zhang, Zhiying Zhou
• Citations: 1 (Details)

• Numerical Simulation of the Relationship between the Width of Destressed Zone and Blasthole Depth, Engineering, Vol.12 No.4, 2020
• Jiansheng Tian, Qingru Wu, Zhijun Liu
• Citations: 1 (Details)

• Mathematical Modeling of Sucrose Hydrolysis with Product and Substrate Inhibition, Engineering, Vol.12 No.4, 2020
• Brunella Ascione, Rino Apicella, Vittorio Romano
• Citations: 1 (Details)

• Study of an Ultrasonic Probe Installed into a Small Diameter-Pipe Using an Electromagnetic Acoustic Transducer, Engineering, Vol.12 No.8, 2020
• Riichi Murayama, Benjie Wang, Koutarou Shindou, Koudai Katsunaga
• Citations: 1 (Details)

• Can Electricity Be New?, Engineering, Vol.12 No.7, 2020
• Michael Bank
• Citations: 1 (Details)

• Implementation of Control Algorithms in Small Embedded Systems, Engineering, Vol.12 No.9, 2020
• Lars Bengtsson
• Citations: 1 (Details)

• Effects of Soil Compaction in the Fight against Unpaved Roads Degradation Due to Erosion Caused by Heavy Rain: Proposition of a Specific CBR Evaluation Model, Engineering, Vol.13 No.3, 2021
• Timothée Thierry Odi Enyegue, Eric Flavien Mbiakouo-Djomo, Hugues Tsanga, Fabien Kenmogne, Blaise Ngwem Bayiha, Gilbert Tchemou, Ebenezer Njeugna, Didier Fokwa
• Citations: 1 (Details)

• Development of a Model for International Traveler’s Check-In Process Using Arena Software Tool, Engineering, Vol.12 No.11, 2020
• O. O. Olusanya, J. L. Obetta, M. O. Oyediram, A. W. Elegbede
• Citations: 1 (Details)

• Theoretical Features of the Process Cleaning Zone between Sections of Raw Cotton from Weed Impurities, Engineering, Vol.12 No.10, 2020
• Isaev Shahboz, Sultanov Otabek, Goybnazarov Egamnazar, Sarimsakov Olimjon
• Citations: 1 (Details)

• Performance Evaluation & Operation of DSP Control UPS System, Engineering, Vol.12 No.9, 2020
• S. M. Sayedur Rahman, Diponkar Paul, Md. Masud Rana
• Citations: 1 (Details)

• Analytical Modeling and Computer Simulation of Heat Transfer Phenomena during Hydrothermal Processing Using SOLIDWORKS^®, Engineering, Vol.12 No.9, 2020
• Muhammad Musaddique Ali Rafique, Umair Shah
• Citations: 1 (Details)

• Assessment of Ballast Flying in the National Railway Network of Ethiopia, Engineering, Vol.13 No.7, 2021
• Fikadu Mengistu, Henok F. Gebregziabher
• Citations: 1 (Details)

• Numerical Analysis of Upwind Difference Schemes for Two-Dimensional First-Order Hyperbolic Equations with Variable Coefficients, Engineering, Vol.13 No.6, 2021
• Yanmeng Sun, Qing Yang
• Citations: 1 (Details)

• Magnetic Technique Estimation of Weld Residual Stress Failure Due to Tensile Loading, Engineering, Vol.13 No.6, 2021
• C. E. Etin-Osa, L. M. Ebhota
• Citations: 1 (Details)

• Simulation of a Model for International Traveler’s Check-In Process Using Arena Software Tool, Engineering, Vol.13 No.3, 2021
• J. L. Obetta, O. O. Olusanyan, M. O. Oyediran, W. B. Wahab, A. T. Olusesi, A. W. Elegbede
• Citations: 1 (Details)

• A Compact Difference Method for Viscoelastic Plate Vibration Equation, Engineering, Vol.13 No.11, 2021
• Cailian Wu, Congcong Wei, Ailing Zhu
• Citations: 1 (Details)

• Theoretical Study of Seed Movement in Cotton Seeds Selection Device, Engineering, Vol.13 No.10, 2021
• Obidov Avazbek, Sultonov Mirzaolim
• Citations: 1 (Details)

• Modeling the Process of Transportation of Seed Cotton through the Parameters of the Food Zone, Engineering, Vol.13 No.9, 2021
• Akmal Umarov, Dilmurat Kurbanov, Muazzam Kenjayeva, Botir Mardonov
• Citations: 1 (Details)

• A Biproportional Construction Algorithm for Correctly Calculating Fourier Series of Aperiodic Non-Sinusoidal Signal, Engineering, Vol.13 No.10, 2021
• Zicheng Li, Mingwei Ren, Zhaoling Chen, Guohai Liu
• Citations: 1 (Details)

• Analysis of Thermo-Magneto-Elastic Nonlinear Dynamic Response of Shallow Conical Shells, Engineering, Vol.10 No.12, 2018
• Shende Cen, Jiachu Xu
• Citations: 1 (Details)

• Effect of Single Pass Laser Surface Treatment on Microstructure Evolution of Inoculated Zr_47.5Cu_45.5Al₅Co₂ and Non-Inoculated Zr₆₅Cu₁₅Al₁₀Ni₁₀ Bulk Metallic Glass Matrix Composites, Engineering, Vol.10 No.10, 2018
• Muhammad Musaddique Ali Rafique
• Citations: 1 (Details)

• Mapping Correlation Dimension along the Wall Region of a High-Flux Gas-Solid Riser Using Embedded Solid Concentration Time Series, Engineering, Vol.10 No.10, 2018
• Justin M. Jeremiah, Samwel V. Manyele, Abraham K. Temu, Jesse-X. Zhu
• Citations: 1 (Details)

• Techniques of Discrete Function Transfers into Continuous Function in Practice, Engineering, Vol.10 No.10, 2018
• Ming-Jong Lin
• Citations: 1 (Details)

• Automotive Aerodynamics Analysis Using Two Commonly Used Commercial Software, Engineering, Vol.11 No.1, 2019
• Adil Loya, Ammar Iqbal, Muhammad Tauseef Nasir, Hasan Ali, Muhammad Zia Ullah Khan, Muhammad Imran
• Citations: 1 (Details)

• Investigation of Entrance and Wall Dynamics of the High-Flux Gas-Solid Riser Using Statistical Analysis of Solids Concentration Signals, Engineering, Vol.11 No.3, 2019
• Justin M. Jeremiah, Samwel V. Manyele, Abraham K. Temu, Jesse-X. Zhu
• Citations: 1 (Details)

• Badush Dam: A Unique Case of Flood Wave Retention Dams Uncertain Future and Problematic Geology, Engineering, Vol.11 No.4, 2019
• Nasrat Adamo, Nadhir Al-Ansari, Varoujan Sissakian, Jan Laue, Sven Knutsson
• Citations: 1 (Details)

• Reliability Analysis of Super 13Cr Tubing in Ultra-Deep Gas Well, Engineering, Vol.11 No.7, 2019
• Lihu Cao, Hongtao Liu, Junyan Liu, Hailong Geng, Haotian Wei
• Citations: 1 (Details)

• Development of Technology for Producing a Fat Composition Based on Ester for Fattening Leather, Engineering, Vol.11 No.6, 2019
• Makhbuba Shamsieva, Tulkin Kodirov, Abror Xomidjonov
• Citations: 1 (Details)

• Optimum Autofrettage Pressure of Hydrogen Valve Using Finite Element and Fatigue Analysis, Engineering, Vol.12 No.1, 2020
• Slawomir Kedziora, Thanh Binh Cao
• Citations: 1 (Details)

• Theoretical Calculation of Lift Force for Ideal Electric Asymmetric Capacitor Loaded by High Voltage, Engineering, Vol.12 No.1, 2020
• Xiangyu Cheng, Guangli Kuang, Yan Zhang, Pengcheng Huang, Donghui Jiang, Shili Jiang, Xinxing Qian, Hangwei Ding, Wenge Chen
• Citations: 1 (Details)

• Theoretical Calculation of Lift Force for General Electric Asymmetric Capacitor Loaded by High Voltage, Engineering, Vol.12 No.1, 2020
• Yan Zhang, Xiangyu Cheng, Pengcheng Huang, Donghui Jiang, Shili Jiang, Xinxing Qian, Hangwei Ding, Guangli Kuang, Wenge Chen
• Citations: 1 (Details)

• Effects of Anthropometry Variations on Physiological Parameters of Heart Rate, Oxygen Consumption, Aerobic Power While Performing Manual Operation at Fixed Vice Height, Engineering, Vol.12 No.1, 2020
• Olusegun Gideon Akanbi, Bukola Olanrewaju Afolabi, Omowumi Adegboye
• Citations: 1 (Details)

• Human Skeleton Detection, Modeling and Gesture Imitation Learning for a Social Purpose, Engineering, Vol.12 No.2, 2020
• Linda Nanan Vallée, Sao Mai Nguyen, Christophe Lohr, Ioannis Kanellos, Olivier Asseu
• Citations: 1 (Details)

• Experimental Evaluation of Parameterized Nonlinear MPC Applied to PEM Fuel Cell, Engineering, Vol.12 No.2, 2020
• Cédric Damour, Dominique Grondin, Michel Benne, Brigitte Grondin-Perez, Jean-Pierre Chabriat
• Citations: 1 (Details)

• Mechanical Properties for Circumferential Welding Applied to UNS S32750 Super Duplex Stainless Steel Using the GMAW Process with CMT Control, Engineering, Vol.11 No.9, 2019
• Bruno Pizol Invernizzi, Leandro Gusmão Silva, Maurício David Martins das Neves
• Citations: 1 (Details)

• Development of a Competitiveness Improvement Framework for Forensic Science Laboratories, Engineering, Vol.11 No.9, 2019
• Gloria Cuthbert Omari, Samwel Victor Manyele, George Mwaluko
• Citations: 1 (Details)

• Thermal Modeling of a Multilayer Integrated LC Filter for Temperature Distribution Calculation, Engineering, Vol.11 No.11, 2019
• Somo Coulibaly, Diby Kadjo Ambroise, Loum Georges
• Citations: 1 (Details)

• Research on Ride Comfort Model of Wheel Motor Driving Vehicle Based on Matlab/Simulink, Engineering, Vol.9 No.11, 2017
• Wenwen Xiao, Feihu Xuan, Huanghuang Zhang
• Citations: 1 (Details)

• Flow Boiling Numerical Solution through a Water Based Nano-Fluidic Mixture Free Convection, Engineering, Vol.10 No.1, 2018
• Yasir M. Shariff
• Citations: 1 (Details)

• Determination of the Chemical Structure of the Iraqi Oil Shale and Its Hydrocarbon Forms, Engineering, Vol.10 No.1, 2018
• Atiya Al-Zuheri, Haider Rashad, Ali A. Al Maliki, Hussain M. Hussain, Nadhir Al-Ansari
• Citations: 1 (Details)

• Energy Optimisation in Wireless Sensor Network, Engineering, Vol.9 No.10, 2017
• Guy Landry Diety, Kouadio Eugène Ali, Olivier Asseu, Bolou Bi Zehero, Soumaya Hamouda
• Citations: 1 (Details)

• Vibration Annihilation of Sandwiched Beam with MROF DTSMC, Engineering, Vol.9 No.9, 2017
• Vivek Rathi, Ahmad Ali Khan
• Citations: 1 (Details)

• Optimization of Evidence Analysis Cost Using Arbitrary Re-Sampling Techniques for Sample Influx into Forensic Science Laboratory, Engineering, Vol.9 No.5, 2017
• Samwel Victor Manyele
• Citations: 1 (Details)

• Analysis of Turnaround Time during Casefile and Sample Processing in Forensic Science Laboratory, Engineering, Vol.10 No.2, 2018
• G. C. Omari, S. V. Manyele, G. Mwaluko
• Citations: 1 (Details)

• Distance Control and Positive Security for Intrinsic Equipment Working in Explosive Potential Atmospheres, Engineering, Vol.10 No.3, 2018
• Emil Pop, Gabriel-Ioan Ilcea, Ionut-Alin Popa
• Citations: 1 (Details)

• Electrical Energy Transmission by Several Wires and Reactive Power Problems, Engineering, Vol.10 No.6, 2018
• Michael Bank
• Citations: 1 (Details)

• Research on FAHP Method Based on Highway Bridge Safety, Engineering, Vol.10 No.6, 2018
• Changmin Yang, Quanle Wang, Ruining Wei, Kuo Lu
• Citations: 1 (Details)

• Analysis on Scour Characteristics under River Bed Variation in Weir Downstream, Engineering, Vol.10 No.8, 2018
• Dongwoo Ko, Joongu Kang
• Citations: 1 (Details)

• Predicting Changes in Transportation Usage and Reductions in CO₂ Emissions Due to Electric Cars, Engineering, Vol.10 No.7, 2018
• Sun Young Ahn, Sang Hyup Lee
• Citations: 1 (Details)

• Analysis of Selecting Gated Community as Opening Its Micro-Inter-Road Network, Engineering, Vol.10 No.7, 2018
• Lin Dong, Akira Rinoshika, Zhixian Tang
• Citations: 1 (Details)

• Numerical Feasibility Study of Electric Heating Strategies for Subsea Tie-In Flowlines Using a 1-D Mechanistic Multiphase Flow Simulator, Engineering, Vol.10 No.9, 2018
• Diana González, Milan Stanko, Michael Golan
• Citations: 1 (Details)

• Diamond Rib: A Mechanical Design Method for Improving the Stiffness of a Structure, Engineering, Vol.8 No.6, 2016
• Kazunori Shinohara, Masanobu Mizoguchi, Shintatsu Suzuki, Yasutaka Narusawa
• Citations: 1 (Details)

• Analysis, Design, and Test of CDMA LFSR with Offset Mask Using Standard ICs, Engineering, Vol.8 No.4, 2016
• Mouhamed Fadel Diagana, Serigne Bira Gueye
• Citations: 1 (Details)

• A Simulation Study of the Steam Reforming of Methaneina Fixed-Bed Reactor, Engineering, Vol.8 No.4, 2016
• Fernando Antôniode Araújo Silva, Kenia Carvalho Mendes, Jornandes Dias da Silva
• Citations: 1 (Details)

• Review of Oil and Gas Development Life Cycle Project Management (LCPM), Engineering, Vol.8 No.3, 2016
• Yongqin Yan, Haohan Liu
• Citations: 1 (Details)

• Shear Behavior in Indented Concrete Layers with Different Strengths, Engineering, Vol.8 No.7, 2016
• Jae-Yoon Kang, Jong-Sup Park, Woo-Tai Jung, Moon-Seoung Keum
• Citations: 1 (Details)

• Engineering and Tectonic Study of Rocks Discontinuities in the Proposed Abo-Hederya Quarry Site, Missan SE Iraq, Engineering, Vol.8 No.8, 2016
• Jaffar H. A. Al-Zubaydi, Abdulkadhim J. Alabidi, Ali M. H. Al-Janabi, Nadhir Al-Ansari
• Citations: 1 (Details)

• Evaluating Oblique Shock Waves Characteristics on a Double-Wedge Airfoil, Engineering, Vol.8 No.12, 2016
• Jorge Luis Garrido Tellez, Eusebio Hernandez-Martinez, Miguel Toledo Velazquez, Jose Angel Ortega Herrera, Pedro Quinto-Diez
• Citations: 1 (Details)

• Numerical Investigation on Flow Pattern of Air-Oil with Different Viscosities Lubrication, Engineering, Vol.9 No.1, 2017
• Qunfeng Zeng, Jinhua Zhang, Jun Hong, Wenjun Su
• Citations: 1 (Details)

• Productivity Testing Design Method of Multi-Factor Control for Unconsolidated Sandstone Gas Reservoir, Engineering, Vol.8 No.11, 2016
• Muwang Wu, Hao Liang, Mingjie Zhang, Dianqiang Sun, Peng Zhong
• Citations: 1 (Details)

• Variability in Quantity and Salinity of Produced Water from an Oil Production in South Kuwait, Engineering, Vol.16 No.1, 2024
• Feras Al Salem, Thies Thiemann
• Citations: 1 (Details)

• The Erdös-Faber-Lovász Conjecture for Gap-Restricted Hypergraphs, Engineering, Vol.16 No.2, 2024
• Zhimin Wang
• Citations: 1 (Details)

• Evaluating Water Scarcity Indices for Cultivation Region in Sadat Al-Hindya, Babylon, Iraq: A Case Study, Engineering, Vol.15 No.10, 2023
• Ali Hassan Hommadi, Nadhir Abbas Al-Ansari, Ahmed Al Obaidy, Wissam K. Obied, Rafat N. Abdul-Ghni, Sawan Ali Abed
• Citations: 1 (Details)

• Performance Enhancement of CZTS Solar Cell with CuSbS₂ Back Surface Field: A Numerical Simulation Approach, Engineering, Vol.15 No.9, 2023
• Md. Ferdous Wahid, Nowshad Ahmed, Md. Shahriar Rahman, Abdullah Al Mamun, Md. Nuralam Howlader, Md. Motiur Rahman Tareq
• Citations: 1 (Details)

• Importance of Photo-Realistic and Dedicated Simulator in Agricultural Robotics, Engineering, Vol.15 No.5, 2023
• Hasib Mansur, Stephen Welch, Luke Dempsey, Daniel Flippo
• Citations: 1 (Details)

• Analysis of Remotely Sensed Imagery and Architecture Environment for Modelling 3D Detailed Buildings Using Geospatial Techniques, Engineering, Vol.15 No.5, 2023
• Hayder Dibs, Nadhir Al-Ansari, Jan Laue
• Citations: 1 (Details)

• Thermal Characterization of Concrete and Cement Mortar from Construction Sites and Industrial Production Units in the City of Ouagadougou with a View to Standardization in Energy Certification, Engineering, Vol.15 No.6, 2023
• Saïdou Bamogo, Fati Zoma, Etienne Malbila, David Y. K. Toguyeni
• Citations: 1 (Details)

• Integrating Highly Spatial Satellite Image for 3D Buildings Modelling Using Geospatial Algorithms and Architecture Environment, Engineering, Vol.15 No.4, 2023
• Hayder Dibs, Nadhir Al-Ansari
• Citations: 1 (Details)

• Numerical Simulation of the Thermal Behaviour of a Building with or without Typha Using the Commercial Software Visual TTH, Engineering, Vol.14 No.12, 2022
• Joseph Sambasene Diatta, Issa Sy, Marthe Tatiana Diatta, Seydou Ba
• Citations: 1 (Details)

• Experimental Study and Modeling of a Convective Dryer for Fruits and Vegetables, Engineering, Vol.15 No.1, 2023
• Souleymane Sinon, Salifou Tera, Kayaba Haro, El-Maktoume Djanfar, Oumar Sanogo, Sié Kam
• Citations: 1 (Details)

• Operations of Knapsack Sprayer and Its Impacts on Physiological Parameters of Selected Operators, Engineering, Vol.15 No.2, 2023
• Bukola Olanrewaju Afolabi, Akinfoye Oyime Daniel Adejumo, Ayoade Oladele Atere, Titus Adeyinka Ilori
• Citations: 1 (Details)

• Management of Water Treatment Systems Automatically via the Internet of Things, Engineering, Vol.14 No.9, 2022
• Phra Boontham Choomyen, Benchalak Muangmeesri, Dechrit Maneetham
• Citations: 1 (Details)

• Reviewing Non-Technical Skills & Organizational Learning: A Comparative Analysis of Critical Safety Factors within the UK’s High-Risk Industries, Engineering, Vol.14 No.11, 2022
• Agha Ibiam, Wayne Harrop
• Citations: 1 (Details)

• Improvement of the Process of Separation of Cotton Fiber from Seeds, Engineering, Vol.14 No.12, 2022
• Sharibboy Ergashev, Khayrullo Sharipov, Olimjon Sarimsakov
• Citations: 1 (Details)

• Output Feedback Stabilization for a 1-D Conservative Wave Equation with General Corrupted Boundary Observation, Engineering, Vol.14 No.12, 2022
• Shuangxi Huang
• Citations: 1 (Details)

• Investigation of Changes in Flow Parameters along the Transport Line in Installations for Pneumatic Transport of Cotton, Engineering, Vol.14 No.1, 2022
• Mahfuza Gapparova, Bahrom Mirzaev, Mutalov Muhammadodil, Olimjon Sarimsakov
• Citations: 1 (Details)

• Determination of the Influence of the Speed of the Saw Cylinder of the Saw Gin on the Density, Speed and Composition of the Seed Roll, Engineering, Vol.14 No.3, 2022
• Akmal Umarov, Hamit Akhmedhodjaev, Kamola Ortiqova, Zohida Nasriddinova
• Citations: 1 (Details)

• Anisotropic TV Regularization in Electrical Impedance Tomography: An Experimental Study, Engineering, Vol.14 No.3, 2022
• Yanying Wang
• Citations: 1 (Details)

• Numerical Study Using Statistical and Quantum Approaches for Solving Energy and Navier Stokes Momentum Equations (PDEs), Engineering, Vol.14 No.3, 2022
• Saeed J. Almalowi
• Citations: 1 (Details)

• Fault Detection for a One-Dimensional Wave PDE System, Engineering, Vol.14 No.7, 2022
• Hanhong Zhang
• Citations: 1 (Details)

• About the Change in Air Pressure in the Pipeline during the Pneumatic Transportation of Cotton, Engineering, Vol.14 No.7, 2022
• Farhod Kholmirzaev, Maftuna Yusupova, Abdul-Malik Kayumov, Olimjon Sarimsakov
• Citations: 1 (Details)

• Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel, Engineering, Vol.14 No.8, 2022
• Azizov Shuhrat Mamatovich, Uzoqov Farxodjon, Shermuhammad Alijonov, Hasanov Ahmadjon, Mirzakarimov Mirsharofiddin
• Citations: 1 (Details)