An Inverse Analysis of the Erichsen Test Applied for the Automatic Identification of Sheet Materials Behavior
Adinel Gavrus, Mihaela Banu, Eric Ragneau, Catalina Maier
DOI: 10.4236/eng.2010.27062   PDF    HTML     6,267 Downloads   10,765 Views   Citations


Among the technological tests, the Erichsen drawing test gives a more appropriate material behavior, near the limit of the real manufactured process. In this paper an inverse finite element analysis of the Erichsen test is proposed. The new idea is to use a numerical simulation of the experimental test for the rheological identification of the constitutive equations available for sheet metals alloys. The inverse analysis is based on a robust optimization algorithm and uses simultaneously the experimental test data and the corresponding numerical one. A numerical inverse analysis software named OPTPAR was developed and improved for an automatically coupling with a commercial finite element code charged to simulate the experimental test. Results obtained for a virtual steel alloy will be analyzed numerically in order to validate the finite element model and the identification method. An application to an AA5182 aluminum alloy and a DC03 steel alloy will be presented.

Share and Cite:

A. Gavrus, M. Banu, E. Ragneau and C. Maier, "An Inverse Analysis of the Erichsen Test Applied for the Automatic Identification of Sheet Materials Behavior," Engineering, Vol. 2 No. 7, 2010, pp. 471-476. doi: 10.4236/eng.2010.27062.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] D. Banabic, “Formability of Metallic Materials (Plastic Anisotropy, Formability Testing and Forming Limits),” Springer Verlag, Berlin, Germany, 2000.
[2] R. Padmanabhan, M. C. Oliveir, J. L. Alves and L. F. Menezes, “Influence of Process Parameters on the Deep Drawing of Stainless Steel,” Finite Elements in Analysis and Design Archive, Vol. 43, No. 14, 2007, pp. 1062-1067.
[3] J.-L. Batoz, H. Naceur and Y.-O. Guo, “Sheet Metal Stamping Analysis and Process Design Based on the Inverse Approach,” Proceeding of 10th Esaform Conference on Materials Forming, Zaragozza, Spain, 2007, pp. 1448-1453.
[4] H. Naceur, A. Delamezier, J. L. Batoz, Y. O. Guo and C. K. Lenoir, “Some Improvements on the Optimum Process Design in Deep Drawing Using the Inverse Approach,” Journal of Materials Processing Techenology, Vol. 146, No. 2, 2004, pp. 250-262.
[5] V. Paunoiu and D. Nicoara, “Simulation of Friction Phe-nomenon in Deep Drawing Process,” The Annals of Uni-versity “Dun?rea de Jos” of Gala?i Fascicle VIII, Tribol-ogy, 2003, pp. 407-412.
[6] R. J. Comstock, K. Li and R. H. Wagoner, “Simulation of Axisymmetric Sheet Forming Tests,” Journal of Materials Processing Techenology, Vol. 117, No. 1, 2001, pp. 153-168.
[7] W. G. Granzou, “Sheet Formability of Steel,” 10th Edition, ASM International, Metals Handbook, Materials Park, Ohio, 1990.
[8] B. Kaftanoglu and J. M. Alexander, “An Investigation of the Erichsen Test,” Journal of the Institute of Metals, Vol. 90, 1961, pp. 457- 470.
[9] T. Y. Olsen, “Machines for Ductility Testing,” Proceeding of the American Society of Materials, Vol. 20, 1920, pp. 398-403.
[10] M. Akrout, M. B. Amar, C. Chaker and F. Dammak, “Numerical and Experimental Study of the Erichsen Test for Metal Stamping,” Advances in Production Engineering & Management, Vol. 3, No. 2, 2008, pp. 81-92.
[11] A. Gavrus, V. Grolleau and S. Diot, “Experimental and Numerical Analysis of an Impacted Thin Aluminum Plate,” Proceedings of Structures Under Shock and Impact VII, Montreal, 2002, pp. 477-486.
[12] A. Gavrus, “Identification Des Parametres Rheologiques Par Analyse Inverse,” Phd Thesis, ENSMP, Paris, 1997.
[13] MARC User’s Manual, Analysis Research Corporation, 1997.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.