Top Cited Articles
(598 articles with 5428 citations as of July 2024)

• Metakaolin-Based Geopolymers for Targeted Adsorbents to Heavy Metal Ion Separation, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• Francisco J. López, Satoshi Sugita, Motohiro Tagaya, Takaomi Kobayashi
• Citations: 140 (Details)

• Synthesis of Cu Doped ZnO Nanoparticles: Crystallographic, Optical, FTIR, Morphological and Photocatalytic Study, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• P. K. Labhane, V. R. Huse, L. B. Patle, A. L. Chaudhari, G. H. Sonawane
• Citations: 132 (Details)

• Application of Sub-Critical Water Extraction in Pharmaceutical Industry, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Xiaoxia Liang, Qiaojia Fan
• Citations: 105 (Details)

• A Review on Alternative Gold Recovery Re-agents to Cyanide, Journal of Materials Science and Chemical Engineering, Vol.4 No.8, 2016
• Mertol Gökelma, Alexander Birich, Srecko Stopic, Bernd Friedrich
• Citations: 98 (Details)

• Study of Polypyrrole-Coated MWCNT Nanocomposites for Ammonia Sensing at Room Temperature, Journal of Materials Science and Chemical Engineering, Vol.3 No.10, 2015
• Sanjay G. Bachhav, Dilip R. Patil
• Citations: 96 (Details)

• The Review of Powder Coatings, Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
• Zhongyan Du, Shaoguo Wen, Jihu Wang, Changle Yin, Dayang Yu, Jian Luo
• Citations: 95 (Details)

• Effect of High Temperatures on the Microstructure of Cement Paste, Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• M. A. Tantawy
• Citations: 87 (Details)

• Homogeneous Isolation of Nanocellulose from Cotton Cellulose by High Pressure Homogenization, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Yihong Wang, Xiaoyi Wei, Jihua Li, Qinghuang Wang, Fei Wang, Lingxue Kong
• Citations: 63 (Details)

• Quality of Electroless Ni-P (Nickel-Phosphorus) Coatings Applied in Oil Production Equipment with Salinity, Journal of Materials Science and Chemical Engineering, Vol.1 No.6, 2013
• Fernando B. Mainier, Maria P. Cindra Fonseca, Sérgio S. M. Tavares, Juan M. Pardal
• Citations: 59 (Details)

• Sorption Characteristics for Multiple Adsorption of Heavy Metal Ions Using Activated Carbon from Nigerian Bamboo, Journal of Materials Science and Chemical Engineering, Vol.4 No.4, 2016
• Ademiluyi Falilat Taiwo, Nze Jane Chinyere
• Citations: 59 (Details)

• Effects of Wood Ash on Properties of Concrete and Flowable Fill, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Zhifu Yang, Jon Huddleston, Heather Brown
• Citations: 54 (Details)

• Ionic Group Derivitized Nano Porous Carbon Electrodes for Capacitive Deionization, Journal of Materials Science and Chemical Engineering, Vol.2 No.3, 2014
• Marc Andelman
• Citations: 51 (Details)

• Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method, Journal of Materials Science and Chemical Engineering, Vol.3 No.3, 2015
• M. G. Anantha Prasad, Nityanand Bandekar
• Citations: 47 (Details)

• Structural and Dielectric Studies of Gd Doped ZnO Nanocrystals at Room Temperature, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• P. U. Aparna, N. K. Divya, P. P. Pradyumnan
• Citations: 47 (Details)

• Synthesis and Characterization of Free and Copper (II) Complex of N,N′-Bis(Salicylidene)Ethylenediamine for Application in Dye Sensitized Solar Cells, Journal of Materials Science and Chemical Engineering, Vol.5 No.6, 2017
• William Ghann, Hany Sobhi, Hyeonggon Kang, Tulio Chavez-Gil, Fred Nesbitt, Jamal Uddin
• Citations: 43 (Details)

• Influence of Glass Fiber wt% and Silanization on Mechanical Flexural Strength of Reinforced Acrylics, Journal of Materials Science and Chemical Engineering, Vol.2 No.2, 2014
• Rodrigo B. Fonseca, Isabella N. Favarão, Amanda V. B. Kasuya, Marcel Abrão, Nícolas F. M. da Luz, Lucas Z. Naves
• Citations: 41 (Details)

• Use of Shore Hardness Tests for In-Process Properties Estimation/Monitoring of Silicone Rubbers, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• H. Zhao, D. Allanson, X. J. Ren
• Citations: 38 (Details)

• Synthesis and Structural Characterization of CSH-Phases in the Range of C/S = 0.41 - 1.66 at Temperatures of the Tobermorite Xonotlite Crossover, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Andrea Hartmann, David Schulenberg, Josef-Christian Buhl
• Citations: 38 (Details)

• Graphite Nanoplatelets Composite Materials: Role of the Epoxy-System in the Thermal Conductivity, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Lurayni Diaz-Chacon, Renaud Metz, Philippe Dieudonné, Jean Louis Bantignies, Said Tahir, Mehrdad Hassanzadeh, Eleida Sosa, Reinaldo Atencio
• Citations: 37 (Details)

• LiMnPO₄: Review on Synthesis and Electrochemical Properties, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Joel O. Herrera, Héctor Camacho-Montes, Luis E. Fuentes, Lorena Álvarez-Contreras
• Citations: 36 (Details)

• Preliminary Study of Alkali Activation of Basalt: Effect of NaOH Concentration on Geopolymerization of Basalt, Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• Mohamed El-Shahte Ismaiel Saraya, Ezzat El-Fadaly
• Citations: 34 (Details)

• Decrease in Cation Exchange Capacity of Zeolites at Neutral pH: Examples and Proposals of a Determination Method, Journal of Materials Science and Chemical Engineering, Vol.2 No.8, 2014
• Moses Wazingwa Munthali, Ponyadira Kabwadza-Corner, Erni Johan, Naoto Matsue
• Citations: 33 (Details)

• Bamboo Fibers Elaborating Cellulose Hydrogel Films for Medical Applications, Journal of Materials Science and Chemical Engineering, Vol.1 No.7, 2013
• Karla Lizette Tovar-Carrillo, Motohiro Tagaya, Takaomi Kobayashi
• Citations: 33 (Details)

• Gold Nanorods: Near-Infrared Plasmonic Photothermal Conversion and Surface Coating, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Bo Cong, Caixia Kan, Honggeng Wang, Jinsheng Liu, Haiying Xu, Shanlin Ke
• Citations: 33 (Details)

• Corrosion Behaviour of Aluminium Engine Block in 3.5% NaCl Solution, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• M. S. Kaiser, Swagata Dutta
• Citations: 32 (Details)

• A Study of Quality Improvement of Natural Rubber Products by Drying Methods, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Felix Osarumhense Aguele, Justice Agbonayinma Idiaghe, Tochukwu Uzoma Apugo-Nwosu
• Citations: 31 (Details)

• Extraction and Modelling of Oil from Eucalyptus camadulensis by Organic Solvent, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• Khalid M. Abed, Badoor M. Kurji, Basma A. Abdul-Majeed
• Citations: 31 (Details)

• Effect of Silane Coupling Agent on the Flexural Property of Glass Fiber Reinforced Composite Film, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Hye-Hyun Kim, Si-Young Kim, Dae-Hee Kim, Chae-Young Oh, Nam-Ju Jo
• Citations: 30 (Details)

• Study of Sodium-Chromium-Iron-Phosphate Glass by XRD, IR, Chemical Durability and SEM, Journal of Materials Science and Chemical Engineering, Vol.1 No.3, 2013
• Youssef Makhkhas, Said Aqdim, El Hassan Sayouty
• Citations: 30 (Details)

• Microwave Absorbing Properties of W-Type Hexaferrite Ba(MnZn)_xCo_2(1-x)Fe₁₆O₂₇, Journal of Materials Science and Chemical Engineering, Vol.1 No.4, 2013
• Xianming Qin, Ying Cheng, Kesheng Zhou, Shengxiang Huang, Xia Hui
• Citations: 30 (Details)

• Damping Properties of Ethylene-Vinyl Acetate Rubber/Polylactic Acid Blends, Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
• Xiaozhen He, Ming Qu, Xinyan Shi
• Citations: 29 (Details)

• Effect of Dye Structure on the Photodegradation Kinetic Using TiO₂ Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.5 No.6, 2017
• Hawraa Ayoub, Mounir Kassir, Mohammad Raad, Houssein Bazzi, Akram Hijazi
• Citations: 29 (Details)

• Electrochemical Polymerization of 4,4-Dimethyl-2,2’-Bithiophene in Concentrated Polymer Liquid Crystal Solution, Journal of Materials Science and Chemical Engineering, Vol.5 No.2, 2017
• Naoto Eguchi, Kohsuke Kawabata, Hiromasa Goto
• Citations: 28 (Details)

• Electrocatalytic Oxidation of Methanol on Glassy Carbon Electrode Modified by Metal Ions (Copper and Nickel) Dispersed into Polyaniline Film, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Asmea Khouchaf, Driss Takky, Mohammed El Mahi Chbihi, Said Benmokhtar
• Citations: 28 (Details)

• Reaction Rate Characteristics of SrBr₂ Hydration System for Chemical Heat Pump Cooling Mode, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Takehiro Esaki, Noriyuki Kobayashi
• Citations: 27 (Details)

• Modeling and Optimizations of Phosphate Removal from Aqueous Solutions Using Synthetic Zeolite Na-A, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• E. A. Mohamed, A. Q. Selim, M. K. Seliem, Mostafa R. Abukhadra
• Citations: 27 (Details)

• Detailed Micro Raman Spectroscopy Analysis of Doped Silicon Thin Film Layers and Its Feasibility for Heterojunction Silicon Wafer Solar Cells, Journal of Materials Science and Chemical Engineering, Vol.1 No.5A, 2013
• Z. P. Ling, J. Ge, R. Stangl, A. G. Aberle, T. Mueller
• Citations: 27 (Details)

• Calcined Clay Pozzolan as an Admixture to Mitigate the Alkali-Silica Reaction in Concrete, Journal of Materials Science and Chemical Engineering, Vol.2 No.5, 2014
• James Sarfo-Ansah, Eugene Atiemo, Kwabena Appiah Boakye, Delali Adjei, Albert A. Adjaottor
• Citations: 27 (Details)

• Transport Properties of Novel Hybrid Cation-Exchange Membranes on the Base of MF-4SC and Halloysite Nanotubes, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Anatoly Filippov, Daria Khanukaeva, Denis Afonin, Galina Skorikova, Evgeny Ivanov, Vladimir Vinokurov, Yuri Lvov
• Citations: 27 (Details)

• Epoxy Thermosets with Self-Healing Ability, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Eugenio Amendola, Stefania Dello Iacono, Antonello Pastore, Massimiliano Curcio, Alfonso Iadonisi
• Citations: 26 (Details)

• Tailoring Natural Zeolites by Acid Treatments, Journal of Materials Science and Chemical Engineering, Vol.7 No.2, 2019
• Marcia Silva, Alice Lecus, Yuting Lin, Joseph Corrao
• Citations: 26 (Details)

• A Review on Development of Natural Fibre Composites for Construction Applications, Journal of Materials Science and Chemical Engineering, Vol.9 No.7, 2021
• Nahiyan Al-Azad, Muhammad Fazli Mohamad Asril, Mohd. Kamal Mohd. Shah
• Citations: 26 (Details)

• Study of Quantitative and Qualitative Characteristics of Nickel Clusters and Semiconductor Structures, Journal of Materials Science and Chemical Engineering, Vol.4 No.5, 2016
• Elyor Bahriddinovich Saitov
• Citations: 25 (Details)

• Effects of Bifunctional Chain Extender on the Crystallinity and Thermal Stability of PET, Journal of Materials Science and Chemical Engineering, Vol.1 No.6, 2013
• Bo Liu, Qianwei Xu
• Citations: 24 (Details)

• Silicon-Basing Ceramizable Composites Containing Long Fibers, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Zbigniew Pędzich, Magdalena Ziąbka, Rafał Anyszka, Dariusz M. Bieliński
• Citations: 23 (Details)

• Geopolymers Using Rice Husk Silica and Metakaolin Derivatives; Preparation and Their Characteristics, Journal of Materials Science and Chemical Engineering, Vol.2 No.5, 2014
• Francisco J. López, Satoshi Sugita, Motohiro Tagaya, Takaomi Kobayashi
• Citations: 23 (Details)

• Effect of Spin Coating Speed on Some Optical Properties of ZnO Thin Films, Journal of Materials Science and Chemical Engineering, Vol.4 No.5, 2016
• David Adegboyega Ajadi, Saint Muyiwa Agboola, Oluwaseun Adedokun
• Citations: 23 (Details)

• Degumming of Silk Fibers by CO₂ Supercritical Fluid, Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• Chung-Haur Lo, Yuchou Chao
• Citations: 23 (Details)

• Microrheology and Release Behaviors of Self-Assembled Steroid Hydrogels, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• W. Liang, J. R. Guman-Sepulveda, S. He, A. Dogariu, J. Y. Fang
• Citations: 23 (Details)

• Green Dyeing of Silk Fabric with Turmeric Powder Using Tamarind Seed Coat as Mordant, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Priti Sarker, A. K. M. Ayatullah Hosne Asif, Mahbubur Rahman, Md. Mujahidul Islam, Khan Hridom Rahman
• Citations: 22 (Details)

• An Experimental Investigation of Different Washing Processes on Various Properties of Stretch Denim Fabric, Journal of Materials Science and Chemical Engineering, Vol.9 No.1, 2021
• Md. Zayedul Hasan, A. K. M. Ayatullah Hosne Asif, Abdur Razzaque, Md. Rakibul Hasan, Sudip Sur, Md. Omar Faruque
• Citations: 21 (Details)

• Experimental Investigation of Laser Welding Process in Overlap Joint Configuration, Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019
• Kamel Oussaid, Abderrazak El Ouafi, Ahmed Chebak
• Citations: 21 (Details)

• Nicotinamide Inhibition Properties for Copper Corrosion in 3.5% NaCl Solution: Experimental and Theorical Investigations, Journal of Materials Science and Chemical Engineering, Vol.6 No.3, 2018
• Coulibaly Nagnonta Hippolyte, Brou Yapi Serge, Akpa Sagne, Juan Creus, Trokourey Albert
• Citations: 21 (Details)

• Co Complexes as a Corrosion Inhibitor for 316 L Stainless Steel in H₂SO₄ Solution, Journal of Materials Science and Chemical Engineering, Vol.4 No.9, 2016
• Amin Rabiei Baboukani, Ehsan Sharifi, Saeid Akhavan, Ahmad Saatchi
• Citations: 21 (Details)

• The Impact of Clay Loading on the Relative Intercalation of Poly(Vinyl Alcohol)-Clay Composites, Journal of Materials Science and Chemical Engineering, Vol.4 No.10, 2016
• Moustafa M. Zagho, Mahmoud M. Khader
• Citations: 21 (Details)

• Comparative Study on Conventional Sintering with Microwave Sintering and Vacuum Sintering of Y₂O₃-Al₂O₃-ZrO₂ Ceramics, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Mayur Shukla, Sumana Ghosh, Nandadulal Dandapat, Ashis K. Mandal, Vamsi K. Balla
• Citations: 21 (Details)

• Effect of Boron Addition on the Thermal Properties of Diamond-Particle-Dispersed Cu-Matrix Composites Fabricated by SPS, Journal of Materials Science and Chemical Engineering, Vol.4 No.9, 2016
• Kiyoshi Mizuuchi, Kanryu Inoue, Yasuyuki Agari, Motohiro Tanaka, Takashi Takeuchi, Jun-ichi Tani, Masakazu Kawahara, Yukio Makino, Mikio Ito
• Citations: 21 (Details)

• P-Doped Titania Xerogels as Efficient UV-Visible Photocatalysts, Journal of Materials Science and Chemical Engineering, Vol.2 No.8, 2014
• Céline J. Bodson, Sophie L. Pirard, René Pirard, Ludivine Tasseroul, Catherine Bied, Michel Wong Chi Man, Benoît Heinrichs, Stéphanie D. Lambert
• Citations: 21 (Details)

• Hyper-Miniaturisation of Monodisperse Janus Hydrogel Beads with Magnetic Anisotropy Based on Coagulation of Fe₃O₄ Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.1 No.2, 2013
• Kyouhei Aketagawa, Hirotada Hirama, Toru Torii
• Citations: 20 (Details)

• Effect of the Cation Size Disorder at the A-Site on the Structural Properties of SrAFeTiO₆ Double Perovskites (A = La, Pr or Nd), Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Abdelrahman A. Elbadawi, O. A. Yassin, Mohamed A. Siddig
• Citations: 20 (Details)

• Preparation and Photocatalytic Properties of LnBaCo₂O_5+δ (Ln = Eu, Gd, and Sm), Journal of Materials Science and Chemical Engineering, Vol.3 No.4, 2015
• Bingqian Han, Yuxiu Li, Nan Chen, Dongyang Deng, Xinxin Xing, Yude Wang
• Citations: 20 (Details)

• Production of CH₄ in a Low-Pressure CO₂/H₂ Discharge with Magnetic Field, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Keisuke Arita, Satoru Iizuka
• Citations: 20 (Details)

• Additive Manufacturing of SiC Ceramics with Complicated Shapes Using the FDM Type 3D-Printer, Journal of Materials Science and Chemical Engineering, Vol.7 No.2, 2019
• Hisaya Masuda, Yoshio Ohta, Mikito Kitayama
• Citations: 20 (Details)

• Structural and Optical Properties of Zinc Borotellurite Glass Co-Doped with Lanthanum and Silver Oxide, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Faznny Mohd Fudzi, Halimah Mohamed Kamari, Farah Diana Muhammad, Amirah Abd Latif, Zaitizila Ismail
• Citations: 19 (Details)

• In Situ Synthesis of Titanium Carbide in Pure Aluminium, Journal of Materials Science and Chemical Engineering, Vol.8 No.1, 2020
• Satish Babu Boppana
• Citations: 19 (Details)

• Experimental and Theoretical Investigations on Copper Corrosion Inhibition by Cefixime Drug in 1M HNO₃ Solution, Journal of Materials Science and Chemical Engineering, Vol.9 No.5, 2021
• N’guessan Yao Silvère Diki, Nagnonta Hippolyte Coulibaly, Ollo Kambiré, Albert Trokourey
• Citations: 19 (Details)

• Effect of Melt Mixing Time in Internal Mixer on Mechanical Properties and Crystallization Behavior of Glycidyl Methacrylate Grafted Poly (Lactic Acid), Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Nguyen Chi Thanh, Chaiwat Ruksakulpiwat, Yupaporn Ruksakulpiwat
• Citations: 19 (Details)

• Doping Graphene by Chemical Treatments Using Acid and Basic Substances, Journal of Materials Science and Chemical Engineering, Vol.3 No.10, 2015
• Claudia Bautista-Flores, Roberto Ysacc Sato-Berrú, D. Mendoza
• Citations: 19 (Details)

• Artificial Neural Network Model for Friction Factor Prediction, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Uchechukwu Herbert Offor, Sunday Boladale Alabi
• Citations: 19 (Details)

• Electrical Properties of CuO-Doped PZT-PZN-PMnN Piezoelectric Ceramics Sintered at Low Temperature, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Phan Dinh Gio, Le Dai Vuong, Ho Thi Thanh Hoa
• Citations: 19 (Details)

• Preparation of a Carbon-Based Solid Acid with High Acid Density via a Novel Method, Journal of Materials Science and Chemical Engineering, Vol.2 No.6, 2014
• Siyu Ouyang, Xiangming Kuang, Qiong Xu, Dulin Yin
• Citations: 19 (Details)

• Synthesis of Commercial-Scale Tungsten Carbide-Cobalt (WC/Co) Nanocomposite Using Aqueous Solutions of Tungsten (W), Cobalt (Co), and Carbon (C) Precursors, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• T. Danny Xiao, Xinglong Tan, Maozhong Yi, Shigao Peng, Fangcai Peng, Jiangao Yang, Yu Dai
• Citations: 18 (Details)

• Effects of Carbonation on the Microporosity and Macro Properties of Portland Cement Mortar CEM I, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• Son Tung Pham
• Citations: 18 (Details)

• Properties, Application and Synthesis Methods of Nano-Molybdenum Powder, Journal of Materials Science and Chemical Engineering, Vol.4 No.9, 2016
• Pengfa Feng, Weicheng Cao
• Citations: 18 (Details)

• Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh
• Citations: 18 (Details)

• Synthesis and Characterization of Lithium Manganese Oxide with Different Ratio of Mole on Lithium Recovery Process from Ge-othermal Fluid of Lumpur Sidoarjo, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Lukman Noerochim, Gita Akbar Satriawangsa, Diah Susanti, Amien Widodo
• Citations: 18 (Details)

• Silicon with Clusters of Impurity Atoms as a Novel Material for Optoelectronics and Photovoltaic Energetics, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• M. K. Bakhadyrhanov, U. X. Sodikov, D. Melibayev, Tuerdi Wumaier, S. V. Koveshnikov, K. A. Khodjanepesov, Jiangxiang Zhan
• Citations: 18 (Details)

• New Approach on the Techniques of Content-Based Image Retrieval (CBIR) Using Color, Texture and Shape Features, Journal of Materials Science and Chemical Engineering, Vol.9 No.1, 2021
• Mohd Afizi Mohd Shukran, Muhamad Naim Abdullah, Mohd Sidek Fadhil Mohd Yunus
• Citations: 17 (Details)

• Single Step Microwave Assisted Synthesis and Antimicrobial Activity of Silver, Copper and Silver-Copper Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.8 No.8, 2020
• Myrna Reyes-Blas, Nadja M. Maldonado-Luna, Carla M. Rivera-Quiñones, Ana L. Vega-Avila, Felix R. Roman-Velázquez, Oscar J. Perales-Perez
• Citations: 17 (Details)

• Synergistic Reinforcement of Phenol-Formaldehyde Resin Composites by Poly(Hexanedithiol)/Graphene Oxide, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• Jingliang Wei, Chun Wei, Le Su, Jun Fu, Jian Lv
• Citations: 17 (Details)

• First Principles DFT Study of Hydrogen Storage on Graphene with La Decoration, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Yuanyuan Li, Yiming Mi, Gaili Sun
• Citations: 16 (Details)

• In Vivo Investigation of Zr-Based Bulk Metallic Glasses Sub-Periosteally Implanted on the Bone Surface, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Kazuhiro Imai
• Citations: 16 (Details)

• Effective Modified Carbon Nanofibers as Electrodes for Capacitive Deionization Process, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Nasser A. M. Barakat, Ahmed G. El-Deen, Khalil Abdelrazek Khalil
• Citations: 16 (Details)

• An Interaction Study of Chloro and Alkyl Substituted Benzylamine with DPPH● through UV Spectrophotometric and Physicochemical Methods at T = (298.15, 303.15 and 308.15) K, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Rakesh Kumar Ameta, Man Singh, B. S. Kitawat
• Citations: 16 (Details)

• Interaction of Surfactants and Polyelectrolyte-Coated Liquid Crystal Droplets, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Tanmay Bera, Jiyu Fang
• Citations: 16 (Details)

• Corrosion of Basic Refractories in Contact with Cement Clinker and Kiln Hot Meal, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Jacek Szczerba, Ilona Jastrzębska, Zbigniew Pędzich, Mirosław M. Bućko
• Citations: 16 (Details)

• Salt-Assisted SHS Synthesis of Aluminium Nitride Powders for Refractory Applications, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Alan Wilmański, Mirosław M. Bućko, Zbigniew Pędzich, Jacek Szczerba
• Citations: 16 (Details)

• Anticorrosive Effect of Electrochemical Manganese Dioxide By-Products in Reinforced Concrete, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• N. Chousidis, E. Rakanta, I. Ioannou, G. Batis
• Citations: 16 (Details)

• Nanoindentation Study on Mechanical Properties of Nano-SiO2/Dental Resin Composites, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Chao Zha, Jianhua Hu, Ainong Li, Shangyu Huang, Hanxing Liu, Gang Chen, Anqi Lei, Zuoqi Zhang, Bei Li, Zhengzhi Wang
• Citations: 16 (Details)

• Characterization of the Crystal Structure of Sesame Seed Cake Burned by Nd: YAG Laser, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Muna A. Pn Gawbah, Abdelrahman A. Elbadawi, Yousef A. Alsabah, Mohammed U. Orsod, Ali A. S. Marouf
• Citations: 16 (Details)

• Fabrication and Corrosion Behaviour of Aluminium Alloy (LM-13) Reinforced with Nano-ZrO₂ Particulate Chilled Nano Metal Matrix Composites (CNMMCs) for Aerospace Applications, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Joel Hemanth, M. R. Divya
• Citations: 15 (Details)

• Activated Carbons Based on Shea Nut Shells (Vitellaria paradoxa): Optimization of Preparation by Chemical Means Using Response Surface Methodology and Physicochemical Characterization, Journal of Materials Science and Chemical Engineering, Vol.8 No.8, 2020
• Liouna Adoum Amola, Theophile Kamgaing, Donald Raoul Tchuifon Tchuifon, Cyrille Donlifack Atemkeng, Solomon Gabche Anagho
• Citations: 15 (Details)

• Mechanical Properties of Epoxy Composite Materials Produced with Different Ceramic Powders, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Yelda Akçin Ergün
• Citations: 15 (Details)

• Direct Solid-State Fermentation of Soybean Processing Residues for the Production of Fungal Chitosan by Mucor rouxii, Journal of Materials Science and Chemical Engineering, Vol.3 No.2, 2015
• Andro Mondala, Ramea Al-Mubarak, James Atkinson, Shaun Shields, Brian Young, Yurguen Dos Santos Senger, Jan Pekarovic
• Citations: 15 (Details)

• Progress of Non-Aqueous Electrolyte for Li-Air Batteries, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Xianjun Liu, Baochen Cui, Shuzhi Liu, Yun Chen
• Citations: 15 (Details)

• Synthesis of Nanostructured TiO₂ Photocatalyst with Ultrasonication at Low Temperature, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Yong Tao, Zhenan Han, Zuolian Cheng, Qishan Liu, Fengxia Wei, Kok Eng Ting, Xi Jiang Yin
• Citations: 15 (Details)

• Chromium Electroplating of Aluminium Alloys Using Electroless Nickel as Underlayer, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• Chike F. Oduoza, Enam Khan, Tarsem Sihra
• Citations: 15 (Details)

• Optimization of Microwave Assisted Alkaline Extraction of Xylan from Birch Wood Using Response Surface Methodology, Journal of Materials Science and Chemical Engineering, Vol.1 No.6, 2013
• Suhara Panthapulakkal, Mohini Sain
• Citations: 15 (Details)

• Fabrication of UO₂-Gd₂O₃ Fuel Pellets, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Balakrishna Palanki
• Citations: 15 (Details)

• Determination of Total Flavonoids and Its Antioxidant Ability in Houttuynia cordata , Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Anyin Chen, Wenjun Xiang, Dan Liu, Changlu Liu, Li Yang
• Citations: 15 (Details)

• Structural and Raman Spectroscopic Study of Antimony Doped Bi_0.5Na_0.5TiO₃ Electroceramic, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• K. N. Singh, Versha Sao, P. Tamrakar, S. Soni, V. K. Dubey, P. K. Bajpai
• Citations: 15 (Details)

• The Effect of Temperature on Synthesis and Stability of Superparamagnetic Maghemite Nanoparticles Suspension, Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
• Irwan Nurdin,   Ridwan,   Satriananda
• Citations: 15 (Details)

• Packing Density Improvement through Addition of Limestone Fines, Superfine Cement and Condensed Silica Fume, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• J. J. Chen, A. K. H. Kwan, P. L. Ng, L. G. Li
• Citations: 14 (Details)

• Enhanced Visible-Light-Sensitive Two-Step Overall Water-Splitting Based on Band Structure Controls of Titanium Dioxide and Strontium Titanate, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Satoshi Tanigawa, Toshihiro Takashima, Hiroshi Irie
• Citations: 14 (Details)

• New Strategy for Chemically Attachment of Imine Group on Multi-Walled Carbon Nanotubes Surfaces: Synthesis, Characterization and Study of DC Electrical Conductivity, Journal of Materials Science and Chemical Engineering, Vol.5 No.2, 2017
• Omar Al-Shuja’a, Abeer Obeid, Yousuf El-Shekeil, Mohamed Hashim, Zinab Al-Washali
• Citations: 14 (Details)

• Silver and Gold Nanoparticles Embedded in Potato Starch Gel Films, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Karen Khachatryan, Gohar Khachatryan, Maciej Fiedorowicz
• Citations: 14 (Details)

• Soot and Nanomaterials Synthesis in the Flame, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Z. Mansurov
• Citations: 14 (Details)

• Electrochemical Synthesis of CeB6 Nanotubes, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• H. B. Kushkhov, M. K. Vindizheva, R. A. Mukozheva, A. H. Abazova, M. R. Tlenkopachev
• Citations: 14 (Details)

• Fischer-Tropsch Synthesis over Alumina- Supported Cobalt-Based Catalysts: Effect of Support Variables, Journal of Materials Science and Chemical Engineering, Vol.2 No.12, 2014
• Yan Liu, Heqin Guo, Litao Jia, Zhancheng Ma, Yong Xiao, Congbiao Chen, Ming Xia, Bo Hou, Debao Li
• Citations: 14 (Details)

• Physicochemical and Thermal Characterization of Dura Palm Kernel Powder as a Load for Polymers: Case of Polyvinyl Chloride, Journal of Materials Science and Chemical Engineering, Vol.6 No.6, 2018
• Rolland Djomi, Lucien Jean Raymond Meva’a, Jean Nganhou, Gérard Mbobda, Abel Emmanuel Njom, Yves Didier Modtegue Bampel, Jean-Bosco Saha Tchinda
• Citations: 14 (Details)

• Synthesis, Characterization and Anticancer Activity Studies of New Schiff Base Pt (II) Complex, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Sama A. Al-Aghbari, Omar M. Al-Shuja’a, Rowaida Al-Badani, Abd Al-Wali M. Japir
• Citations: 14 (Details)

• Mild Steel Corrosion Mitigation in Sulphuric Acid via Benign Isolated Phytochemicals from Viscum album, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• N. E. Nya, A. I. Ikeuba, P. C. Okafor, B. U. Ugi, V. M. Bassey, A. I. Obike
• Citations: 13 (Details)

• Nanodiamond for Structural Biomimetic Scaffolds, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Raffaella Aversa, Relly Victoria V. Petrescu, Florian Ion T. Petrescu, Antonio Apicella
• Citations: 13 (Details)

• A Polypyrrole Hybrid Material Self-Assembled with Porphyrin: Facial Synthesis and Enhanced Optical Limiting Properties, Journal of Materials Science and Chemical Engineering, Vol.5 No.10, 2017
• Yun Wang, Aijian Wang, Peiyou Yang, Wenxiu Hu, Xingnan Guo, Jing Zhang, Cheng Li, Chi Zhang
• Citations: 13 (Details)

• Optimization of the Electrospinning Conditions by Box-Behnken Design to Prepare Poly(Vinyl Alcohol)/Chitosan Crosslinked Nanofibers, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Vinícius R. Viana, Willian H. Ferreira, Edwin G. Azero, Marcos L. Dias, Cristina T. Andrade
• Citations: 13 (Details)

• Effect of Nitriding Current Density on the Surface Properties and Crystallite Size of Pulsed Plasma-Nitrided AISI 316L, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• J. C. Díaz-Guillén, E. E. Granda-Gutiérrez, G. Vargas-Gutiérrez, M. R. Díaz-Guillén, J. A. Aguilar-Martínez, L. Álvarez-Contreras
• Citations: 13 (Details)

• Synthesis and Properties of Novel Non-Ionic Polyurethane Dispersion Based on Hydroxylated Tung Oil and Alicyclic Isocyanates, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Xiaomin Yang, Baixia Ren, Zhiyong Ren, Lei Jiang, Wentao Liu, Chengshen Zhu
• Citations: 13 (Details)

• Carboxylation of Aromatics by CO₂ under “Si/Al Based Frustrated Lewis Pairs” Catalytic System, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Miaofei Gu, Zhenmin Cheng
• Citations: 13 (Details)

• Carbon Nanofibers Containing Ag/TiO₂ Composites as a Preliminary Stage for CDI Technology, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Khalil Abdelrazek Khalil, Hamoud Eltaleb, Hany S. Abdo, Salem S. Al-Deyab, H. Fouad
• Citations: 13 (Details)

• Electronic and Optical Properties of Nanostructures and Its Relationship with Harari Index, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• Ali Asghar Khakpoor, Bahare Agahi Keshe
• Citations: 13 (Details)

• The Newest Getter Technologies: Materials, Processes, Equipment, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• Konstantin Chuntonov, Janez Setina, Gary Douglass
• Citations: 13 (Details)

• To the New Concept of Green Tribology, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Vladimir A. Levchenko, Ilia A. Buyanovskii, Vladimir N. Matveenko
• Citations: 13 (Details)

• Resistive Switching in Stabilized Zirconia Films Studied by Conductive Atomic Force Microscopy, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Dmitry Filatov, Dmitry Antonov, Ivan Antonov, Alexander Kasatkin, Oleg Gorshkov
• Citations: 13 (Details)

• Predictive Model for Cement Clinker Quality Parameters, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Nsidibe-Obong Ekpe Moses, Sunday Boladale Alabi
• Citations: 13 (Details)

• Application of Finite Fourier Transform and Similarity Approach in a Binary System of the Diffusion of Water in a Polymer, Journal of Materials Science and Chemical Engineering, Vol.4 No.4, 2016
• Hisham A. Maddah
• Citations: 12 (Details)

• Influence of Cryogenic Treatment on Microstructure and Properties Improvement of Die Steel, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• Shangtan Liu, Xiaochun Wu, Lei Shi, Yiwen Wu, Wei Qu
• Citations: 12 (Details)

• Creation of Bielectron of Dirac Cone: The Tachyon Solution in Magnetic Field, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• Lyubov E. Lokot
• Citations: 12 (Details)

• Design of Korean Standard Modular Buoy Body Using Polyethylene Polymer Material for Ship Safety, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Young Whan Park, Tae Wan Kim, Jae Sub Kwak, In Kwan Kim, Ji Eon Park, Kyong Ho Ha
• Citations: 12 (Details)

• Characterization of Silver Nanoparticles Thin Films with Various Thicknesses by AFM, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Ling Li, Ling Li, Weidong Chen, Jie Zheng, Linwen Wang, Yan Chen
• Citations: 12 (Details)

• Using SiO₂ Nanopowders in Anode Catalyst Layer to Improve the Performance of a Proton Exchange Membrane Fuel Cell at Low Humidity, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Chien-Liang Lin, Shih-Chieh Hsu, Wei-Yu Ho
• Citations: 12 (Details)

• Silver Recovery from Spent Silver Oxide Button Cell by Liquid-Liquid Extraction, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Zeferino Gamiño-Arroyo, Antonio Tapia-Cisneros, Osvaldo M. Zamacona-Saucedo, Irene Cano-Rodríguez, Alberto F. Aguilera-Alvarado, Lorena E. Sánchez-Cadena, Fernando I. Gómez-Castro
• Citations: 12 (Details)

• Ultraslow Relaxation Process of Static Light Scattering Intensity by Boron Oxide above the Glass Transition Temperature, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• N. A. Bokov
• Citations: 12 (Details)

• Adsorption of Indigo Carmine Dye by Composite Activated Carbons Prepared from Plastic Waste (PET) and Banana Pseudo Stem, Journal of Materials Science and Chemical Engineering, Vol.8 No.12, 2020
• Baissassou Debina, Sakué Ngankam Eric, Daniel Fotio, Kamdem Tamo Arnaud, Dai-Yang Lemankreo, Abdoul Ntieche Rahman
• Citations: 12 (Details)

• Secondary Plant Metabolites of Natural Product Origin—Strongylodon macrobotrys as Pitting Corrosion Inhibitors of Steel around Heavy Salt Deposits in Gabu, Nigeria, Journal of Materials Science and Chemical Engineering, Vol.8 No.5, 2020
• Benedict U. Ugi, Victoria M. Bassey, Mbang E. Obeten, Stephen A. Adalikwu, Desmond O. Nandi
• Citations: 12 (Details)

• RETRACTED: Superhydrophobic Coating Fabrication for Metal Protection Based on Electrodeposition Application: A Review, Journal of Materials Science and Chemical Engineering, Vol.9 No.4, 2021
• Robert H. B. Miller, Shugang Hu, Sonkarlay J. Y. Weamie, Saavia A. Naame, Dauda G. Kiazolu
• Citations: 12 (Details)

• Synthesis of CuO_x/MnO₂ Heterostructures with Enhanced Visible Light-Driven Photocatalytic Activity, Journal of Materials Science and Chemical Engineering, Vol.5 No.10, 2017
• Tao Yu, Yangang Sun, Cui Zhe, Wei Wang, Pinhua Rao
• Citations: 12 (Details)

• Analysis of Strain Clamp Failure on 500 kV Transmission Line, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Mingcheng Sun, Che Tan, Chaoqun Zhang, Chao Yang, Hongqiang Li
• Citations: 12 (Details)

• Kinetics of Aldol Condensation of Furfural with Acetone Catalyzed by 1,8-Diazabicyclo[5.4.0]undec-7-ene, Journal of Materials Science and Chemical Engineering, Vol.6 No.2, 2018
• Chengjun Jiang, Lin Cheng, Guilin Cheng
• Citations: 12 (Details)

• Oldoinyo Lengai Volcanic Ash for Removal of Hydrogen Sulfide and Ammonia from Biogas, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Isack Kandola, Alexander Pogrebnoi, Tatiana Pogrebnaya
• Citations: 12 (Details)

• Preparation of CuGaO₂ Thin Film by a Sol-Gel Method Using Two Kinds of Metal Source Combination, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Takashi Ehara
• Citations: 12 (Details)

• Synthesis and Characterization of Porous Carbon from Petroleum Pitch Using KOH, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• C. Srinivasakannan, Mohammad El-Mootassem, K. Suresh Kumar Reddy, Ahmed Al Shoaibi
• Citations: 11 (Details)

• Glass-Reinforced Plastic Filled by Multiwall Carbon Nanotubes and Their Modified Forms, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• Yurii Sementsov, Oksana Cherniuk, Galyna Dovbeshko, Serhii Zhuravskyi, Stanislav Makhno, Bo Wang, Mykola Kartel
• Citations: 11 (Details)

• Ohmic Hetero-Junction of n-Type Silicon and Tungsten Trioxide for Visible-Light Sensitive Photocatalyst, Journal of Materials Science and Chemical Engineering, Vol.5 No.8, 2017
• Masaharu Yoshimizu, Yuki Hotori, Hiroshi Irie
• Citations: 11 (Details)

• Physicochemical Characterisation for Potential Uses as Industrial Mineral of Bauxite from Débélé, Guinea, Journal of Materials Science and Chemical Engineering, Vol.9 No.3, 2021
• Mamadou Yaya Balde, Chantale Njiomou Djangang, Ramatoulaye Binta Diallo, Philippe Blanchart, Daniel Njopwouo
• Citations: 11 (Details)

• Green Degumming of Silk by Enzyme Extracted from Natural Sources, Journal of Materials Science and Chemical Engineering, Vol.8 No.8, 2020
• Mahbubur Rahman, Asim Bhowmik, Sudipta Das, Kartick Chowhan, Tanmoy Biswas
• Citations: 11 (Details)

• Optimization of Ceramic Paste Viscosity Use for the Elaboration of Tubular Membrane Support by Extrusion and Its Application, Journal of Materials Science and Chemical Engineering, Vol.8 No.3, 2020
• Celestine Asobo Yanu, Joseph Marie Sieliechi, Martin Benoit Ngassoum
• Citations: 11 (Details)

• The Role of Corrugation Die Parameters on the Mechanical Properties of Aluminum Alloy (AA 5083) Processed by Repetitive Corrugation and Straightening, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• N. Thangapandian, S. Balasivanandha Prabu
• Citations: 11 (Details)

• A Computational Comparison between Optimization Techniques for Wells Placement Problem: Mathematical Formulations, Genetic Algorithms and Very Fast Simulated Annealing, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Ghazi D. AlQahtani, Ahmed Alzahabi, Timothy Spinner, Mohamed Y. Soliman
• Citations: 11 (Details)

• Characterization and Evaluation of Bond Strength of Dental Polymer Systems Modified with Hydroxyapatite Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.1 No.7, 2013
• Vitor César Dumont, Rafael Menezes Silva, Luiz Edmundo Almeida-Júnior, Juan Pedro Bretas Roa, Adriana Maria Botelho, Maria Helena Santos
• Citations: 11 (Details)

• Selective Heating of Transition Metal Usings Hydrogen Plasma and Its Application to Formation of Nickel Silicide Electrodes for Silicon Ultralarge-Scale Integration Devices, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Tetsuji Arai, Hiroki Nakaie, Kazuki Kamimura, Hiroyuki Nakamura, Satoshi Ariizumi, Satoki Ashizawa, Keisuke Arimoto, Junji Yamanaka, Tetsuya Sato, Kiyokazu Nakagawa, Toshiyuki Takamatsu
• Citations: 11 (Details)

• First-Principles Investigation of the Effect of M-Doped (M = Zr, Hf) TiCoSb Half-Heusler Thermoelectric Material, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Gaili Sun, Yuanyuan Li, Xinxin Zhao, Yiming Mi, Lili Wang
• Citations: 11 (Details)

• Getters: From Classification to Materials Design, Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
• Konstantin Chuntonov, Alexander Atlas, Janez Setina, Gary Douglass
• Citations: 11 (Details)

• Photoluminescence Properties of Europium and Cerium Co-Doped Tantalum-Oxide Thin Films Prepared Using Co-Sputtering Method, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• Kenta Miura, Tetsuhito Suzuki, Osamu Hanaizumi
• Citations: 11 (Details)

• Ultralight Oxygen in Corundum-Bearing Rocks of North Karelia, Russia, as a Result of Isotope Separation by Thermal Diffusion (Soret Effect) in Endogenous Fluid Flow, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• E. Yu. Akimova, K. I. Lokhov
• Citations: 11 (Details)

• Study of Frequency Effects on Hardness Profile of Spline Shaft Heat-Treated by Induction, Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
• Habib Hammi, Abderazzak El Ouafi, Noureddine Barka
• Citations: 10 (Details)

• Effects of Fillers on the Damping Property of Ethylene Vinyl-Acetate/Polylactic Acid Blends, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Xinyan Shi, Lingyan Jia, Yan Ma, Chengliang Li
• Citations: 10 (Details)

• Preparation and Characterization of Polyvinyl Butyral Nanofibers Containing Silver Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Fatma Yalcinkaya, Baturalp Yalcinkaya, Jiri Maryska
• Citations: 10 (Details)

• Formulating for Innovative Self-Compacting Concrete with Low Energy Super-Sulfated Cement Used for Sustainability Development, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Hoang-Anh Nguyen, Ta-Peng Chang, Jeng-Ywan Shih, Chun-Tao Chen
• Citations: 10 (Details)

• Evaluation of Economical and Ecological Aspects of Denim Garments Dyeing with Fluorescent Dye, Journal of Materials Science and Chemical Engineering, Vol.1 No.7, 2013
• Muhammad Abdur Rashid, Md. Delwar Hossain, Muhammad Mufidul Islam, Md. Nakib-Ul-Hasan
• Citations: 10 (Details)

• VLDPE Synthesis by Radical Ethylene Polymerization in Tubular Reactors–Negative Factor or Unrealized Opportunities, Journal of Materials Science and Chemical Engineering, Vol.1 No.1, 2013
• Ye. Koval, Ye. Skvortsevitch, E. Mayer
• Citations: 10 (Details)

• Ceramic Tiles Obtained from Clay Mixtures with the Addition of Diverse Metallurgical Wastes, Journal of Materials Science and Chemical Engineering, Vol.2 No.2, 2014
• Nancy Quaranta, Marta Caligaris, Miguel Unsen, Hugo López, Gisela Pelozo, Juan Pasquini, Carlos Vieira
• Citations: 10 (Details)

• Research on Interlayer Alloys for Transient Liquid Phase Diffusion Bonding of Single Crystal Nickel Base Superalloy DD6, Journal of Materials Science and Chemical Engineering, Vol.2 No.9, 2014
• Qiuya Zhai, Jinfeng Xu, Tianyu Lu, Yan Xu
• Citations: 10 (Details)

• Research on Dihydrate Calcium Sulphate Crystallization during the Production of Phosphoric Acid by Wet Process, Journal of Materials Science and Chemical Engineering, Vol.2 No.12, 2014
• Huirong Du, Anyin Chen, Li Yang
• Citations: 10 (Details)

• Cell-Phone Recycling by Solvolysis for Recovery of Metals, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Lorena Eugenia Sánchez Cadena, Zeferino Gamiño Arroyo, Mario Alberto González Lara, Q. Demetrio Quiroz
• Citations: 10 (Details)

• Numerical Simulation of Mechanical Properties of Nano Particle Modified Polyamide 6 via RVE Modeling, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• J. Huang, M. Uhrig, U. Weber, S. Schmauder
• Citations: 10 (Details)

• Colour Features Extraction Techniques and Approaches for Content-Based Image Retrieval (CBIR) System, Journal of Materials Science and Chemical Engineering, Vol.9 No.7, 2021
• Muhammad Naim Abdullah, Mohd Afizi Mohd Shukran, Mohd Rizal Mohd Isa, Nor Suraya Mariam Ahmad, Mohammad Adib Khairuddin, Mohd Sidek Fadhil Mohd Yunus, Fatimah Ahmad
• Citations: 10 (Details)

• Thermal, Mechanical and Rheological Properties of Low Density/Linear Low Density Polyethylene Blend for Packing Application, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• F. Al-Attar, M. Alsamhan, A. Al-Banna, J. Samuel
• Citations: 10 (Details)

• Low Density Wood Impregnation with Water-Repellent Organosilicic Compounds, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Guadalupe Canosa, Paula V. Alfieri, Carlos A. Giudice
• Citations: 10 (Details)

• From Hydration to Strength Properties of Fly Ash Based Mortar, Journal of Materials Science and Chemical Engineering, Vol.5 No.12, 2017
• Massoud Sofi, Elisa Lumantarna, Zhiyuan Zhou, Rackel San Nicolas, Priyan Mendis
• Citations: 10 (Details)

• Feasibility Study to Evaluate Lattice-Space Changing of a Step-Graded SiGe/Si (110) Using STEM Moiré, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Junji Yamanaka, Mai Shirakura, Chiaya Yamamoto, Kei Sato, Takane Yamada, Kosuke O. Hara, Keisuke Arimoto, Kiyokazu Nakagawa, Akimitsu Ishizuka, Kazuo Ishizuka
• Citations: 10 (Details)

• Comparison between Differently Synthesized Hydroxyapatite Composites for Orthopedic Applications, Journal of Materials Science and Chemical Engineering, Vol.7 No.5, 2019
• Kalinga Hapuhinna, Rajitha Gunaratne, Jagath Pitawala
• Citations: 9 (Details)

• Characteristics of Eu²⁺, Dy³⁺-Doped SrAl₂O₄ Synthesized by Hydrothermal Reaction and Its Photocatalytic Properties, Journal of Materials Science and Chemical Engineering, Vol.6 No.2, 2018
• Byung-Geon Park
• Citations: 9 (Details)

• Guidelines for Optimization of the Absorber Layer Energy Gap for High Efficiency Cu(In,Ga)Se₂ Solar Cells, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• N. Severino, N. Bednar, N. Adamovic
• Citations: 9 (Details)

• Structural Study of Cellulose-Iron Oxide Composite Materials, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Dexu Kong, Lee D. Wilson
• Citations: 9 (Details)

• Solid-State Synthesis of Metastable Ytterbium (II) Oxide, Journal of Materials Science and Chemical Engineering, Vol.6 No.3, 2018
• Aoi Goto, Yoshio Ohta, Mikito Kitayama
• Citations: 9 (Details)

• The Effects of TiO2 Particle Size on the Properties of PTFE/TiO2 Composites, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Fuchuan Luo, Ying Yuan, Bin Tang, Jun Yang, Shuren Zhang
• Citations: 9 (Details)

• A Mini Review on Natural Fiber Honeycomb (NFH) Sandwiched Structure Composite: Flexural Perfomance Perspective, Journal of Materials Science and Chemical Engineering, Vol.9 No.5, 2021
• Nahiyan Al-Azad, Evelynda Christy Mojutan, Mohd. Kamal Mohd. Shah
• Citations: 9 (Details)

• Accelerated Carbonation Assessment of High-Volume Fly Ash Concrete, Journal of Materials Science and Chemical Engineering, Vol.8 No.3, 2020
• Federico Aguayo, Anthony Torres, Yoo-Jae Kim, Omkar Thombare
• Citations: 9 (Details)

• Synthesis and Fluorescence Quantum Yield of Gd_1－xEu_xOOH Crystals, Journal of Materials Science and Chemical Engineering, Vol.2 No.3, 2014
• Hiroaki Samata, Daisuke Itakura, Shungo Imanaka, Tadashi C. Ozawa
• Citations: 9 (Details)

• Bio-Oil Production from Biomass by Flash Pyrolysis in a Three-Stage Fluidized Bed Reactors System, Journal of Materials Science and Chemical Engineering, Vol.2 No.2, 2014
• I. Wilkomirsky, E. Moreno, A. Berg
• Citations: 9 (Details)

• Mechanical Properties of Micro- and Nanostructured Copper Films, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• N. Kosarev, M. Khazin, R. Apakashev, N. Valiev
• Citations: 9 (Details)

• The Heat Treatment Behavior of Super-High Strength Aluminum Alloys by Spray Forming, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Guowei Zhang, Zheng Chen, Xiurong Zhu, Gang Chen, Jing Zhai, Anzhen Guo
• Citations: 9 (Details)

• Research of Nanostructures Formation during Self-Propagating High-Temperature Synthesis of Boride-Containing Composite Materials, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• D. S. Raimkhanova, R. G. Abdulkarimova, Z. A. Mansurov
• Citations: 9 (Details)

• Forced Electrocodeposition of Silica Particles into Nickel Matrix by Horizontal Impinging Jet Cell, Journal of Materials Science and Chemical Engineering, Vol.5 No.2, 2017
• Désiré M. K. Abro, Pierre Jean Marie Richard Dable, Véronique Amstutz, Edith Kouassi Kwa-Koffi, Hubert Girault
• Citations: 9 (Details)

• Catalyst-Free Growth of Graphene by Microwave Surface Wave Plasma Chemical Vapor Deposition at Low Temperature, Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
• Sudip Adhikari, Hare Ram Aryal, Hideo Uchida, Masayoshi Umeno
• Citations: 9 (Details)

• Synthesis, Characterization and Performance Evaluation of an Advanced Solid Electrolyte and Air Cathode for Rechargeable Lithium-Air Batteries, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Susanta K. Das, Jianfang Chai, Salma Rahman, Abhijit Sarkar
• Citations: 9 (Details)

• Effects of LiF on the Structure and Electrical Properties of (Na_0.52K_0.435Li_0.045)Nb_0.87Sb_0.08Ta_0.05O₃ Lead-Free Piezoelectric Ceramics Sintered at Low Temperatures, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• P. D. Gio, N. D. Phong
• Citations: 9 (Details)

• Rheological Behaviour, Synthesis and Performance of Smart Thermal Barrier Coating Systems Based on Hollow Alumina, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• F. Pedraza, B. Rannou, G. Boissonnet, B. Bouchaud, Z. Maache-Rezzoug
• Citations: 8 (Details)

• Hybrid Laser Technology for Creation of Doped Biomedical Layers, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Miroslav Jelinek, Lucie Bacakova, Jan Remsa, Tomas Kocourek, Jan Miksovsky, Petr Pisarik, Marta Vandrovcova, Elena Filova, Sarka Kubinova
• Citations: 8 (Details)

• Hemin Based Biomimetic Oxidative Degradation of Acid Orange 7, Journal of Materials Science and Chemical Engineering, Vol.4 No.6, 2016
• Mei Yan, Huifang Xie, Qing Zhang, Hongxia Qu, Jinyou Shen, Jinming Kong
• Citations: 8 (Details)

• Molecular Dynamic Simulation Study on Glass Transition Temperature of DGEBA-THPA/SWCNTs Composites, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Cai Jiang, Jianwei Zhang, Shaofeng Lin, Dazhi Jiang
• Citations: 8 (Details)

• Microwave-Assisted Modification of Carbon Nanotubes with Biocompatible Polylactic Acid, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Qi Zhang, Shijun Zhang, Liying Zhang
• Citations: 8 (Details)

• The Effect of Heat Treatment Atmosphere on Hardening of Surface Region of H13 Tool Steel, Journal of Materials Science and Chemical Engineering, Vol.1 No.6, 2013
• Timotius Pasang, Zhan Chen, Maziar Ramezani, Thomas Neitzert, Dominique Au
• Citations: 8 (Details)

• Discoloration on Methylene Blue Solutions by Direct and Catalytic Ozonation, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Antonio D. Rodriguez-Lopez, Jose Garcia-Garrido, Cynthia Perez-Ramiro, Esperanza M. Garcia-Castello
• Citations: 8 (Details)

• A Comparison between Forming Behaviours of Two Pre-Consolidated Woven Thermoplastic Composites, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• N. A. Zanjani, S. Kalyanasundaram
• Citations: 8 (Details)

• The Application of Molecularly Imprinted Polymers, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Ming Zhao, Guijun Shen
• Citations: 8 (Details)

• VOCs Destruction by Plasma Catalyst Coupling Using AL-KO PURE Air Purifier on Industrial Scale, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• Zixian Jia, Christelle Barakat, Binjie Dong, Antoine Rousseau
• Citations: 8 (Details)

• Risk level Assessment of the Desalter and Preflash Column of a Nigerian Crude Distillation Unit, Journal of Materials Science and Chemical Engineering, Vol.7 No.11, 2019
• Henry O. Orugba, Samuel E. Ogbeide, Christian Osagie
• Citations: 8 (Details)

• Effect of Pre-Aging, Over-Aging and Re-Aging on Exfoliation Corrosion and Electrochemical Corrosion Behavior of Al-Zn-Mg-Cu Alloys, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Xingzhi Liao, Xiaohua Kong, Pengxuan Dong, Kanghua Chen
• Citations: 8 (Details)

• Facile Preparation, Characterization of Flexible Organic Solar Cells Using P3HT-MWCNTS Composite Photoactive Layer, Journal of Materials Science and Chemical Engineering, Vol.8 No.10, 2020
• Tran Si Trong Khanh, Nguyen Phuong Hoai Nam, Nguyen Nang Dinh
• Citations: 8 (Details)

• Evaluation on the Application of GLB Structures, Journal of Materials Science and Chemical Engineering, Vol.8 No.5, 2020
• Guosong Yang, Kun Wang
• Citations: 8 (Details)

• Recent Advances on Preparation Method of Ti-Based Hydrogen Storage Alloy, Journal of Materials Science and Chemical Engineering, Vol.8 No.12, 2020
• Lina Liang, Feng Wang, Maohua Rong, Zhongmin Wang, Songtao Yang, Jiang Wang, Huaiying Zhou
• Citations: 8 (Details)

• Finite Element Analysis of Graphite/Epoxy Composite Pressure Vessel, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Meng-Kao Yeh, Tai-Hung Liu
• Citations: 8 (Details)

• Enhancement of Oxygen Evolution Activity of Ruddlesden-Popper-Type Strontium Ferrite by Stabilizing Fe4⁺, Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• Toshihiro Takashima, Koki Ishikawa, Hiroshi Irie
• Citations: 8 (Details)

• The Study of the Preparation of Catalysts for Carbonyl Sulfide Hydrolysis under Moderate Temperature, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Yikun Xu, Shangguan Ju, Zexing Wang, Yanxia Liu
• Citations: 8 (Details)

• Surface Roughness of SiGe/Si(110) Formed by Stress-Induced Twins and the Solution to Produce Smooth Surface, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Junji Yamanaka, Mai Shirakura, Chiaya Yamamoto, Naoto Utsuyama, Kei Sato, Takane Yamada, Kosuke O. Hara, Keisuke Arimoto, Kiyokazu Nakagawa
• Citations: 7 (Details)

• Sol-Gel Spin Coating Synthesis of TiO₂ Nanostructure and Its Optical Characterization, Journal of Materials Science and Chemical Engineering, Vol.7 No.6, 2019
• Simeon Amole, Mojoyinola Kofoworola Awodele, Oluwaseun Adedokun, Momodu Jain, Ayodeji Oladiran Awodugba
• Citations: 7 (Details)

• Optimisation of Crude Oil Adsorbent Developed from a Modified Styrene Kenaf Shive, Journal of Materials Science and Chemical Engineering, Vol.7 No.2, 2019
• Zwahruddeen Muhammad Salisu, Ishiaku S. Umaru, Danladi Abdullahi, Mohammed Kabir Yakubu, Diya’uddeen Bashir Hasan
• Citations: 7 (Details)

• Fatigue Responses of Three AA 2000 Series Aluminum Alloys, Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019
• Gbadebo Moses Owolabi, Mark Thom, Olusegun Ajide, Nikhil Kumar, Amin Azimi, Horace Whitworth, Grant Warner
• Citations: 7 (Details)

• Analysis about the Behavior and Modeling of pH-Sensitive Hydrogels with Different Ratios of Chitosan and Polyvinylpyrrolidone, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Daniela Ribeiro, Gabriel Yuto, Silvia Lenyra Meirelles Campos Titotto
• Citations: 7 (Details)

• Proton Conductivity of Ni, Y Co-Doped BaZrO₃, Journal of Materials Science and Chemical Engineering, Vol.6 No.6, 2018
• Hiroya Morishita, Yumiko Ikebe, Eriko Ban
• Citations: 7 (Details)

• Microstructure Evolution and Simulation in 22MnB5 Steel during Hot Stamping, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Kuanhui Hu, Shizheng Zhou, Rongdong Han, Jun Gao, Yi Yang
• Citations: 7 (Details)

• Hybrid Composites of Phosphate Glass Fibre/Nano-Hydroxyapatite/Polylactide: Effects of Nano-Hydroxyapatite on Mechanical Properties and Degradation Behaviour, Journal of Materials Science and Chemical Engineering, Vol.6 No.11, 2018
• Lizhe He, Chenkai Zhu, Jiahao Wu, Xiaoling Liu
• Citations: 7 (Details)

• Effect of Organic Coating Corrosion Inhibitor on Protection of Reinforced Mortar, Journal of Materials Science and Chemical Engineering, Vol.7 No.1, 2019
• Evgenia Voulgari, Aggeliki Zacharopoulou, Nikolaos Chousidis, George Batis
• Citations: 7 (Details)

• Modeling the Mechanical Properties of Clay Powder Filled Recycled Low Density Polyethylene Composites, Journal of Materials Science and Chemical Engineering, Vol.8 No.7, 2020
• Gerald Okwuchi Onyedika, Genevive Chinyere Onuegbu, Chukwudike Onuoha
• Citations: 7 (Details)

• Efficiency and Effectiveness Concepts Applied in Shell and Tube Heat Exchanger Using Ethylene Glycol-Water Based Fluid in the Shell with Nanoparticles of Copper Oxide (CuO), Journal of Materials Science and Chemical Engineering, Vol.8 No.8, 2020
• Élcio Nogueira
• Citations: 7 (Details)

• Developing High Strength Pervious Concrete Mixtures with Local Materials, Journal of Materials Science and Chemical Engineering, Vol.8 No.1, 2020
• Anthony Torres, Federico Aguayo, Cristian Gaedicke, Parker Nerby, Mario Cavazos, Collin Nerby
• Citations: 7 (Details)

• Recycling of Secondary Aluminum Dross to Fabricate Porous γ-Al₂O₃ Assisted by Corn Straw as Biotemplate, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Senjing Zhang, Weijun Zhu, Qingda Li, Wenjie Zhang, Xuemei Yi
• Citations: 7 (Details)

• Durability of Reinforced Concrete Beams under Simultaneous Flexural Load in Corrosive Environment, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Loukas Karavokyros, George Batis, Nikolaos Katsiotis, Emmanouil Tzanis, Margarita Beazi-Katsioti
• Citations: 7 (Details)

• Adsorption of Pharmaceutical Contaminants from Aqueous Solutions Using N,O-Carboxymethyl Chitosan/Polyethylene Oxide (PEO) Electrospun Nanofibers, Journal of Materials Science and Chemical Engineering, Vol.9 No.11, 2021
• Amna Hassan Issa Khierallah, Ilse Ileana Cardenas Bates, Bruno Chabot, André Lajeunesse
• Citations: 7 (Details)

• Synthesis of P(NIPAM-co-Am)/Mesoporous Silica Composites and Their Temperature- Responsive Anion Exchange, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Kenji Murakami, Yasuto Sato, Yukihiko Inoue
• Citations: 7 (Details)

• Surface Plastic Deformation by Sliding Elliptical Cylinder, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Rostislav I. Nepershin
• Citations: 7 (Details)

• Pt Deposition on Anode Enhances the Performance of Dye-Sensitized Solar Cell with Non-Cross-Linked Gel Electrolyte, Journal of Materials Science and Chemical Engineering, Vol.1 No.6, 2013
• Masato Ohmukai, Jun Kyokane
• Citations: 7 (Details)

• Effect of Hot Environment on Strength and Heat Transfer Coefficient of Nano-Clay Concrete Paper Title, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Wei-Chien Wang, Shao-Yu Wang, Cheng-Hsun Lin
• Citations: 7 (Details)

• Analysis of Te and TeO₂ on CdZnTe Nuclear Detectors Treated with Hydrogen Bromide and Ammonium-Based Solutions, Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• Mebougna L. Drabo, Stephen U. Egarievwe, Ifechukwude O. Okwechime, Dominique E. Jones, Anwar Hossain, Ralph B. James
• Citations: 7 (Details)

• Textile Dye Removal Using Photocatalytic Cascade Disk Reactor Coated by ZnO Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.4 No.12, 2016
• Hamid Amiri, Bita Ayati, Hossein Ganjidoust
• Citations: 7 (Details)

• Sorption Hysteresis of Hardened Cement Pastes, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Peter Schiller, Mirco Wahab, Thomas Bier, Sandra Waida, Hans-Jörg Mögel
• Citations: 7 (Details)

• Direct Preparation of the Nanocrystalline MnZn Ferrites by Using Oxalate as Precipitant, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Fei Hua, Cuicui Yin, Huanque Zhang, Qiangqiang Suo, Xin Wang, Huifen Peng
• Citations: 7 (Details)

• The Effect of Graphene/Ag Nanoparticles Addition on the Performances of Organic Solar Cells, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Cheng Fang Ou
• Citations: 7 (Details)

• Synthesis of ZnS, CdS and Core-Shell Mixed CdS/ZnS, ZnS/CdS Nanocrystals in Tapioca Starch Matrix, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Karen Khachatryan, Gohar Khachatryan, Maciej Fiedorowicz
• Citations: 7 (Details)

• Preparation of CuO-Ta₂O₅ Composites Using a Simple Co-Sputtering Method, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• Kenta Miura, Takumi Osawa, Yuya Yokota, Zobaer Hossain, Osamu Hanaizumi
• Citations: 7 (Details)

• Properties, Characterizations and Applications of Organometallic Surfactants—A Review, Journal of Materials Science and Chemical Engineering, Vol.3 No.10, 2015
• Saminu M. Magami, Zaharaddeen N. Garba, Mansur B. Ibrahim
• Citations: 7 (Details)

• Li₄Ti₅O₁₂ Synthesis with High Specific Surface Area and Single Phase, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• Toshihito Ohtake, Ken-ichiro Iijima
• Citations: 6 (Details)

• Effect of High-Energy Ball Milling on the Magnetic Properties of NiZn Ferrite Ceramics Synthesized by Spark Plasma Sintering, Journal of Materials Science and Chemical Engineering, Vol.3 No.8, 2015
• Shang Gao, Shenhua Song, Qingguo Song
• Citations: 6 (Details)

• The Effect of Replacement of Zn ²⁺ Cation with Ni ²⁺ Cation on the Structural Properties of Ba sub>2Zn sub>1–x Ni sub>xWO sub>6 Double Perovskite Oxides (X = 0, 0.25, 0.50, 0.75, 1), Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Yousif A. Alsabah, Abdelrahman A. Elbadawi, Eltayeb M. Mustafa, Mohamed A. Siddig
• Citations: 6 (Details)

• Investigation of the Influence of Annealing Temperature on the Morphology and Growth Kinetic of Ni3Sn4 in the Ni-Sn-Solder System, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Mathias Wendt, Andreas Plöβl, Andreas Weimar, Marcus Zenger, Klaus Dilger
• Citations: 6 (Details)

• Optimizing a Single-Absorption-Layer Thin-Film Solar Cell1 Model to Achieve 31% Efficiency, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Joseph E. O’Connor, Sherif Michael
• Citations: 6 (Details)

• Adsorption and Desorption Behaviors of Bovine Serum Albumin on Gelatin/Chitosan Sponge, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Tetsuya Furuike, Thitirat Chaochai, Daiki Komoto, Hiroshi Tamura
• Citations: 6 (Details)

• ZnO Films Deposited on Glass by Means of DC Sputtering, Journal of Materials Science and Chemical Engineering, Vol.4 No.10, 2016
• Masato Ohmukai, Takuya Nakagawa, Ayumu Matsumoto
• Citations: 6 (Details)

• The Role of Water Motion in Natural Processes, Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• A. D. Styrkas
• Citations: 6 (Details)

• Influence of Shot Peening on DIN 1.2714 Hot Work Tool Steel, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Valmik Bhavar, Sachin V. Patil, Prakash Kattire, P. P. Date, R. K. P. Singh
• Citations: 6 (Details)

• Chiral-Electroactive Low-Bandgap Polymer Composite, Journal of Materials Science and Chemical Engineering, Vol.5 No.2, 2017
• Naoto Eguchi, Kohsuke Kawabata, Hiromasa Goto
• Citations: 6 (Details)

• Luminescence Properties of Phosphate Phosphor: Barium Tungstate Doped with Dy, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Peiju Hu, Wei Zhang, Zhengfa Hu, Zuyong Feng, Lun Ma, Xiuping Zhang, Xia Sheng, Jie Luo
• Citations: 6 (Details)

• Microstructure of Plasma Sprayed Al2O3-3wt%TiO2 Coating Using Freeze Granulated Powder, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Yiming Yao, Ola Lyckfeldt, Aurélien Tricoire, Aurélien Tricoire
• Citations: 6 (Details)

• Hydrophobic Sand on the Basis of Superhydrophobic Soot Synthesized in the Flame, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• B. T. Lesbayev, M. Nazhipkyzy, N. G. Prikhodko, M. G. Solovyova, G. T. Smagulova, G. O. Turesheva, M. Auyelkhankyzy, T. T. Mashan, Z. A. Mansurov
• Citations: 6 (Details)

• Enhanced High-Temperature Cycling Stability of LiMn₂O₄ by LiCoO₂ Coating as Cathode Material for Lithium Ion Batteries, Journal of Materials Science and Chemical Engineering, Vol.2 No.12, 2014
• Jing Yan, Haohan Liu, Yuelei Wang, Xinxin Zhao, Yiming Mi, Baojia Xia
• Citations: 6 (Details)

• Vaporization and Thermodynamics of Glass-Forming Oxide Melts: Mass Spectrometric Study and Modeling, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• V. L. Stolyarova
• Citations: 6 (Details)

• A Flexible Quasi-Solid-State Electrochromic Device with Polymeric Electrolyte and WO3/NiO Complementary System, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Jen-Yuan Wang, Min-Chuan Wang, Der-Jun Jan
• Citations: 6 (Details)

• Stretch Forming Simulation of Woven Composites Based on an Orthotropic Non-Linear Material Model, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• N. A. Zanjani, S. Kalyanasundaram
• Citations: 6 (Details)

• A Two-Scale Multi-Physics Deep Learning Model for Smart MEMS Sensors, Journal of Materials Science and Chemical Engineering, Vol.9 No.8, 2021
• José Pablo Quesada-Molina, Stefano Mariani
• Citations: 6 (Details)

• Biomimetic Synthesized Conductive Copolymer EDOT-Pyrrole Electrodes for Electrocardiogram Recording in Humans, Journal of Materials Science and Chemical Engineering, Vol.9 No.10, 2021
• Manuel Eduardo Martínez-Cartagena, Juan Bernal-Martínez, Carlos Alberto Aranda-Sánchez, Arnulfo Banda-Villanueva, José Luis Gonzalez-Zapata, Antonio Ledezma-Pérez, Alfredo Aguilar-Elguezabal, Jorge Romero-García
• Citations: 6 (Details)

• Evaluate the Strength of Denim Goods Using Different Washing Technique, Journal of Materials Science and Chemical Engineering, Vol.9 No.3, 2021
• Jakaria Ahamed, Md. Faysal Mahmud, Md. Faysal Ahammed, Rony Mia, Md. Zahid Hasan, Tarequl Hasan Khan, Golam Qibria Limon, Al Mojnun Shamim
• Citations: 6 (Details)

• Alizarine Yellow R as Reagent of the Determination of Manganese by Extraction-Photometric Method, Journal of Materials Science and Chemical Engineering, Vol.6 No.10, 2018
• G. G. Abbasova, A. M. Pashajanov
• Citations: 6 (Details)

• Lanthanum-Neodymium-Co-Substituted Calcium Fluorobritholites, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Mustapha Hidouri, Nawaf Albeladi
• Citations: 6 (Details)

• 7-(2-Ethyltiophenyl) Theophylline as Copper Corrosion Inhibitor in 1M HNO₃, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Ouédraogo Augustin, Akpa Sagne Jacques, Diki N’guessan Yao Silvère, Diomande Gbe Gondo Didier, Coulibaly Nagnonta Hippolyte, Trokourey Albert
• Citations: 6 (Details)

• Density and Strength of Mortar Made with the Mixture of Wood Ash, Crushed Gneiss and River Sand as Fine Aggregate, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Mambou Ngueyep Luc Leroy, Keyangue Tchouata Jules Hermann, Atangana Nkene Elise Rose, Ndop Joseph, Fotseu Miyo Christian Dupont, Ndjaka Jean-Marie Bienvenu
• Citations: 6 (Details)

• Thermoelectric Properties of Misfit Layered Bismuth-Based Rhodium Oxides, (Bi,Pb)₂Sr₂Rh₂O_y, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Takuya Watanabe, Hiroshi Irie
• Citations: 6 (Details)

• Dehydrogenation of n-Butane to Butenes and 1,3-Butadiene over PtAg/Al₂O₃ Catalysts in the Presence of H₂, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Hideki Kurokawa, Hayato Namoto, Atsuko Horinouchi, Mitsuhiko Sato, Mitsuki Usui, Hitoshi Ogihara, Hiroshi Miura
• Citations: 6 (Details)

• Characteristics of Absorption Equilibrium with HFC-134a and an Ionic Liquid Pair, Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019
• Takehiro Esaki, Noriyuki Kobayashi, Hiroki Uchiyama, Yousuke Matsukuma
• Citations: 6 (Details)

• Electrochemical Study of Redox Reaction of Various Gold III Chloride Concentrations in Acidic Solution, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Afolabi Ayeni, Shafiq Alam, Georges Kipouros
• Citations: 6 (Details)

• Effect of Pre-Ageing on the Precipitation Behaviors and Mechanical Properties of Al-7Si-Mg Alloys, Journal of Materials Science and Chemical Engineering, Vol.6 No.3, 2018
• Wen-Chi Chen, Sheng-Lon Lee, An-Hung Tan
• Citations: 6 (Details)

• An Efficient Synthesis of Enantiomerically Pure γ-Aminobutyric Acid (GABA) Derivatives, Journal of Materials Science and Chemical Engineering, Vol.5 No.8, 2017
• Huixia Liu, Jiani Yuan, Qinqin Tian, Nan Ji, Wei He
• Citations: 6 (Details)

• Effects of CaTiO3 Loading on the Properties of PTFE/TiO2 Composites, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Bin Tang, Fuchuan Luo, De Zhou, Ying Yuan, Shuren Zhang
• Citations: 6 (Details)

• Synthesis and Characterization of GLBCO-123 Phase: Gd_1-xL_xBa₂Cu₃O_7-δ (x = 0.0 - 0.5), Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• Made Sumadiyasa, I. Gusti Agung Putra Adnyana, Nyoman Wendri, Putu Suardana
• Citations: 6 (Details)

• Electro-Chemical Impedance Spectral (EIS) Study of Patinated Bronze Corrosion in Sulfate Media: Experimental Design Approach, Journal of Materials Science and Chemical Engineering, Vol.5 No.10, 2017
• Aymen Chaabani, Safa Aouadi, Nébil Souissi, X. Ramón Nóvoa
• Citations: 5 (Details)

• Use of Industrial Coal Waste Materials as Adsorbents for Textile Effluent Remediation, Journal of Materials Science and Chemical Engineering, Vol.5 No.8, 2017
• Mohamed H. Mohamed, Marissa Pirlot, Michael K. Danquah, Lee D. Wilson
• Citations: 5 (Details)

• Evaluation of Performance of Thermal and Electrical Hybrid Adsorption Chiller Cycles with Mechanical Booster Pumps, Journal of Materials Science and Chemical Engineering, Vol.5 No.5, 2017
• Tao Zeng, Takehiro Esaki, Jun Li, Noriyuki Kobayashi, Hongyu Huang
• Citations: 5 (Details)

• The Role of Compatibilizers on the Properties of PC/ABS Alloy, Journal of Materials Science and Chemical Engineering, Vol.5 No.6, 2017
• Hao Duan, Min-Qi Xin, Kwang-Yoon Kim, Jun-Jie Tang
• Citations: 5 (Details)

• Syntheses, Structures and Properties of 3d-4f Heterometallic Coordination Polymers Based on Tetradentate Metalloligand and Lanthanoid Ions, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Xingnan Guo, Jun Qian, Qiang Zhou, Chi Zhang
• Citations: 5 (Details)

• Determination of Volume Conductivity of Polyethylene Using Positive Corona, When the Current through the Sample Depends Linearly on Grid Potential, Journal of Materials Science and Chemical Engineering, Vol.5 No.12, 2017
• Pranvera Dhima, Floran Vila
• Citations: 5 (Details)

• Electrolysis of Converter Matte in Molten CaCl₂-NaCl, Journal of Materials Science and Chemical Engineering, Vol.6 No.2, 2018
• Dan Wang, Changyuan Lu, Xingli Zou, Kai Zheng, Zhongfu Zhou, Xionggang Lu
• Citations: 5 (Details)

• Shape Control of Silica Powder Formation, Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019
• Marwa Nabil, Hussien A. Motaweh
• Citations: 5 (Details)

• Research and Advances of Silicate Plugging Agent in the Oilfields, Journal of Materials Science and Chemical Engineering, Vol.7 No.9, 2019
• Juan Zhao, Jian Zhang
• Citations: 5 (Details)

• Metal Oxide Heteronanostructures Prepared by Electrospinning for the Humidity Detection: Fundamentals and Perspectives, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• Victor N. S. Leão, Evando S. Araújo
• Citations: 5 (Details)

• Silicon Nanocrystals on the Surface of Standard Si Wafers: A Micro-Raman Investigation, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Mohammed S. G. Mohammed, Enzo Cazzanelli, Angela Fasanella, Marco Castriota
• Citations: 5 (Details)

• Preparation and Performance of Short Carbon Fiber and Flake Graphene Reinforced Polycarbonate Composites: Effects of Different Tougheners, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Zhixing Yu, Yu Bai, Yingcheng Li, Wei Wang, James H. Wang
• Citations: 5 (Details)

• Identifying Factors Hindering the Adoption of Expanded Polystyrene for Building Construction in Akure, Nigeria, Journal of Materials Science and Chemical Engineering, Vol.6 No.10, 2018
• Victor Momoh, Clement Oluwole Folorunso
• Citations: 5 (Details)

• Chemical and Microstructural Effects of Different Calcinating Temperatures on Selected Pozzolans, Journal of Materials Science and Chemical Engineering, Vol.6 No.12, 2018
• Catherine Mayowa Ikumapayi
• Citations: 5 (Details)

• Study of Potassium Recovery from Biomass Ash Using Tartaric Acid and Syngenite Method, Journal of Materials Science and Chemical Engineering, Vol.9 No.5, 2021
• Afan Bagus Mananda, Hiroyuki Harada, Hadi Imran A. Halem, Yoshiharu Mitoma, Fujita Keiko
• Citations: 5 (Details)

• Corrosion Resistance and Physical-Mechanical Properties of Reinforced Mortars with and without Carbon Nanotubes, Journal of Materials Science and Chemical Engineering, Vol.10 No.1, 2022
• Nikolaos Chousidis, Aggeliki Zacharopoulou, Christos Zeris, George Batis
• Citations: 5 (Details)

• Optimization of Contents of Three Raw Clay Materials in Formulation of a Porcelain, Journal of Materials Science and Chemical Engineering, Vol.10 No.1, 2022
• Youssouf Sawadogo, Moustapha Sawadogo, Moussa Ouédraogo, Mohamed Seynou, Gisèle Lecomte-Nana, Philippe Blanchart, Moussa Gomina, Lamine Zerbo
• Citations: 5 (Details)

• Physico-Mechanical Properties of Bio-Based Bricks, Journal of Materials Science and Chemical Engineering, Vol.10 No.4, 2022
• Valentin Makomra, Lionel Karga Tapsia, Benoit Ndiwe, Maxime Dawoua Kaoutoing, Noel Konai, Abel Njom, Tawe Laynde, Danwe Raidandi
• Citations: 5 (Details)

• Machinability of Polymeric Composites and Future Reinforcements—A Review, Journal of Materials Science and Chemical Engineering, Vol.10 No.5, 2022
• Abdullah Shalwan, Talal Alsaeed, Belal Yousif
• Citations: 5 (Details)

• Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts, Journal of Materials Science and Chemical Engineering, Vol.10 No.10, 2022
• Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva
• Citations: 5 (Details)

• Performance Evaluation of Fluorescence and Photostability of Coumarin Disperse Yellow 82, Journal of Materials Science and Chemical Engineering, Vol.8 No.1, 2020
• Aba Akebi Atta-Eyison
• Citations: 5 (Details)

• Study on Capacitance of Zn-Based Electrode in Redox Electrolyte System, Journal of Materials Science and Chemical Engineering, Vol.8 No.1, 2020
• Yubin Yang, Xinmei Fan, Shaomin Zhu, Hongfeng Xu
• Citations: 5 (Details)

• Some Optical, Electrical Properties of Lead Free KNN-CZN Ceramics, Journal of Materials Science and Chemical Engineering, Vol.8 No.7, 2020
• Phan Dinh Gio, Truong Thanh Bau, Ngo Vu Hoai, Nguyen Quoc Nam
• Citations: 5 (Details)

• Hydroxylation of Phenol Catalyzed by Iron Metal-Organic Framework (Fe-BTC) with Hydrogen Peroxide, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Samiran Bhattacharjee, Mohammad A. Matin
• Citations: 5 (Details)

• The Influence of Cu on the Dielectric Properties of NiZnFe₂O₄ Synthesized by Solid State Reaction Method, Journal of Materials Science and Chemical Engineering, Vol.8 No.9, 2020
• Sozie Y. Ali, Omer I. Eid, Mohamed A. Siddig
• Citations: 5 (Details)

• Influence of Silicate Structure on the Low Temperature Synthesis of Belite Cement from Different Siliceous Raw Materials, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Ma Tantawy
• Citations: 5 (Details)

• Characterisation of Thin Films Using a Coherence Scanning Interferometry, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Yang Yu, Daniel Mansfield
• Citations: 5 (Details)

• Effects of Solar UV Radiation on Materials Used in Agricultural Industry in Salta, Argentina: Study and Characterization, Journal of Materials Science and Chemical Engineering, Vol.2 No.4, 2014
• Carlos Cadena, Delicia Acosta
• Citations: 5 (Details)

• Anaerobic Digestion of Olive Oil Mill Wastewater Pre-Treated with Catalytic Wet Peroxide Photo-Oxidation Using Copper Supported Pillared Clay Catalysts, Journal of Materials Science and Chemical Engineering, Vol.2 No.6, 2014
• R. Ben Achma, A. Ghorbel, A. Dafinov, F. Medina
• Citations: 5 (Details)

• The Effect of Pressure on the Synthesis of Graphene Layers in the Flame, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• N. G. Prikhodko, M. Auyelkhankyzy, B. T. Lesbayev, Z. A. Mansurov
• Citations: 5 (Details)

• Research on Combined Hot Extrusion Forming Process of Alternator Poles, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Cheng Yang, Shengdun Zhao
• Citations: 5 (Details)

• Adsorption Capacity of Expansion Graphite for Xylenol Orange, Journal of Materials Science and Chemical Engineering, Vol.1 No.1, 2013
• Xiuyan Pang, Chunyan Yang, Shuxia Ren
• Citations: 5 (Details)

• Diffusion Analysis and Modeling of Potassium Sorbate in Gelatin Based Antimicrobial Film, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Hui Wang, Jieyu He, Hongyuan Sun
• Citations: 5 (Details)

• Design and Characterization of a Horizontal Double Impinging Jet Cell: Determination of Flow Modes at the Surface of a Flat Electrode, Journal of Materials Science and Chemical Engineering, Vol.4 No.8, 2016
• Désiré M. K. Abro, Pierre Dable, Fernando Cortez-Salazar, Véronique Amstutz, Edith Kouassi Kwa-Koffi, Hubert Girault
• Citations: 5 (Details)

• Hardness Profile Prediction for a 4340 Steel Spline Shaft Heat Treated by Laser Using a 3D Modeling and Experimental Validation, Journal of Materials Science and Chemical Engineering, Vol.4 No.4, 2016
• Mahdi Hadhri, Abderazzak El Ouafi, Noureddine Barka
• Citations: 5 (Details)

• Detection of Three Common Organic Explosives Using Capillary Electrophoresis, Journal of Materials Science and Chemical Engineering, Vol.4 No.6, 2016
• Hong Zhou, Zhanfang Liu, Yuyou Sun, Ling Zeng, Hongcheng Mei, Jianzhong Xu, Baoyuan Guo, Hongxia Hao
• Citations: 5 (Details)

• Thermoelectric Properties of Silver Antimonate with Mixed Valency of Antimony, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Kensuke Ozawa, Hirofumi Kakemoto, Hiroshi Irie
• Citations: 5 (Details)

• STEM Moiré Observation of Lattice-Relaxed Germanium Grown on Silicon, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Junji Yamanaka, Chiaya Yamamoto, Hiroki Nakaie, Tetsuji Arai, Keisuke Arimoto, Kosuke O. Hara, Kiyokazu Nakagawa
• Citations: 5 (Details)

• Electronic Structures and Magnetic Properties of Co-Adsorbed Monolayer WS₂, Journal of Materials Science and Chemical Engineering, Vol.4 No.10, 2016
• Weiyun Xu
• Citations: 5 (Details)

• Preparation of CuYO₂ Thin Films by Sol-Gel Method Using Copper Acetate and Yttrium Acetate as Metal Sources, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Takashi Ehara
• Citations: 5 (Details)

• Evaluation of Surface Roughness of Metal and Alloy Material, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Joon-Seong Lee
• Citations: 5 (Details)

• The Investigation of Microstructure and the X-Ray Phase Analysis of Re-X Alloys (X = S, Se, Te), Journal of Materials Science and Chemical Engineering, Vol.3 No.10, 2015
• E. A. Salakhova, D. B. Tagiyev, K. F. Ibrahimova, P. E. Kalantarova
• Citations: 5 (Details)

• Nano Structures and Its Thermodynamic Properties Using TIM, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Ali Asghar Khakpoor, Bahare Agahi Keshe, Ali Agahi Kesheh
• Citations: 4 (Details)

• Controlling and Evaluating the Structure and Morphology of Polymers on Multiple Scales, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Geoffrey R. Mitchell, Ana Tojeira, Thomas Gkourmpis, James J. Holt, Peter Harris, Marilena Pezzuto
• Citations: 4 (Details)

• Juniperus communis Extract Effect on Bronze Corrosion in Natural 0.5 M Chloride Medium, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Refka Ben Channouf, Nebil Souissi, Nizar Bellakhal
• Citations: 4 (Details)

• Biosorption of Zn²⁺ and Ni²⁺, Cu²⁺ by Four Kinds of Active Microalgae, Journal of Materials Science and Chemical Engineering, Vol.4 No.11, 2016
• Fang Chen, Budan Chen, Guojuan Gan, Lin Zhang, Yan Liang, Sikai Wu
• Citations: 4 (Details)

• Kinetics Study on Photocatalytic Degradation of Methyl Orange Catalyzed by Sea Urchin-Like Cu2O, Journal of Materials Science and Chemical Engineering, Vol.4 No.6, 2016
• R. J. Gao, T. Ding, X. J. Duan
• Citations: 4 (Details)

• Rapid Residue Analysis of Sulfonylurea Herbicides in Surface Water: Methodology and Residue Findings in eastern Tiaoxi River of China, Journal of Materials Science and Chemical Engineering, Vol.4 No.6, 2016
• Ninghui Song, Min Guo, Lili Shi
• Citations: 4 (Details)

• Magnetoelectric Coupling in Metglas/BaTiO₃/Metglas Lead-Free Magnetoelectric Composites, Journal of Materials Science and Chemical Engineering, Vol.4 No.8, 2016
• S. D. Patil, K. Y. Rajpure, A. M. Shaikh
• Citations: 4 (Details)

• Comparative Studies on Synthesis and Characterization of Titania and Iron Oxide Doped Magnesia from Indian Salem Magnesite, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Sukriti Manna, Tamoghna Chakrabarti
• Citations: 4 (Details)

• Behaviors of Polypyrrole Soft Actuators in LiTFSI or NaCl Electrolyte Solutions Containing Methanol, Journal of Materials Science and Chemical Engineering, Vol.1 No.4, 2013
• Tetsuya Kadoyama, Jun Yamasaki, Futo Tsumuji, Satoshi Takamiya, Shou Ogihara, Daiki Hoshino, Yasushiro Nishioka
• Citations: 4 (Details)

• Microstructure of Carbon Fiber and Carbon Reinforced Plastic, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• N. I. Baurova, Wei Hao, Ouyang Xiao
• Citations: 4 (Details)

• Scale-Up of the Polyol Process for Nanomaterial Synthesis, Journal of Materials Science and Chemical Engineering, Vol.2 No.9, 2014
• Samir Farhat, Nassima Ouar, Mongia Hosni, Ivaylo Hinkov, Silvana Mercone, Frédéric Schoenstein, Noureddine Jouini
• Citations: 4 (Details)

• Electrode Property of Sintered Ceramic Based on CaMnO3 in LiOH Aqueous Solution, Journal of Materials Science and Chemical Engineering, Vol.2 No.4, 2014
• Takao Esaka, Yuhta Adachi
• Citations: 4 (Details)

• Modeling and Simulation of Mechanical Properties of Nano Particle Modified Polyamide 6, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• I. Yi, J. Wiedmaier, S. Schmauder
• Citations: 4 (Details)

• Remediation of the Contaminated Soils by Washing with an Aqueous Cysteamine Lixiviant, Journal of Materials Science and Chemical Engineering, Vol.3 No.2, 2015
• Hui-Min Liu, Yang Yan, Dai-Jie Shao, De-Liang Li, Yun-Liang Zhang
• Citations: 4 (Details)

• Single Phase Li₄Ti₅O₁₂ Synthesis for Nanoparticles by Two Steps Sintering, Journal of Materials Science and Chemical Engineering, Vol.3 No.2, 2015
• Toshihito Ohtake
• Citations: 4 (Details)

• α-Endosulfan Removal from Water by Adsorption over Natural Clays from Burkina Faso: An Isothermal Study, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Arsène H. Yonli, Hermann A. Kabore, Jean Koulidiati
• Citations: 4 (Details)

• Effect of Milling Time on Co_0.5Zn_0.5Fe₂O₄ Microstructure and Particles Size Evolution via the Mechanical Alloying Method, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Abubakar Yakubu, Zulkifly Abbas, Mansor Hashim, Ahmad Fahad
• Citations: 4 (Details)

• Voltage Generated Characteristics of Piezoelectric Ceramics Cymbal Transducer, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Long Wu, Ming-Cheng Chure, King-Kung Wu, Chia-Cheng Tung
• Citations: 4 (Details)

• Performance of Galvanized Steel Reinforcement in Concrete in Sea and Dead Sea Water, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Sami Masadeh
• Citations: 4 (Details)

• Performance of Tannin/Glycerol-Chromate Hybrid Conversion Coating on Aluminium, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Makanjuola Oki
• Citations: 4 (Details)

• Evaluation of Filler Distribution in Particulate Reinforced Composites, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Kurganova Yuliya, Lopatina Yuliya, Yijin Chen
• Citations: 4 (Details)

• A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Chuan Zhang, Feng Zhu, Houssem Badreddine, Xiaolu Gong
• Citations: 4 (Details)

• Enhanced Photo-Induced Property of LPCVD-TiO₂ Layer on PCVD-TiO_x Initial Layer, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Satoshi Yamauchi, Keisuke Yamamoto, Sakura Hatakeyama
• Citations: 4 (Details)

• Evaluation of Two Highly Porous Microcrystalline Biphasic Calcium Phosphate-Based Bone Grafts for Bone Regeneration: An Experimental Study in Rabbits, Journal of Materials Science and Chemical Engineering, Vol.8 No.6, 2020
• Miguel Ángel Garcés-Villalá, Sergio David Rico, Sergio Gustavo Nazar, Mariano Escudero-Pinel, Víctor Galván-Josa, José Luis Calvo-Guirado
• Citations: 4 (Details)

• Statistical Analysis on Physico-Chemical Properties of Some Nigerian Clay Deposits, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Jongs Solomon Lydia, Jock Asanja Alexander, Ekanem Eno Okon, Jauro Aliyu
• Citations: 4 (Details)

• High Performance Hydroxide Zinc Carbonate Composite for Supercapacitors, Journal of Materials Science and Chemical Engineering, Vol.7 No.11, 2019
• Yu Zhao, Yubin Yang, Ruiming Ren
• Citations: 4 (Details)

• An Experimental Study on Using Laser for Cleaning Metal Threads, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Neama A. Shehata, Mohamed A. Marouf, Badawy M. Ismail
• Citations: 4 (Details)

• The Effect of Mix-Design and Corrosion Inhibitors on the Durability of Concrete, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Loukas Karavokyros, Nikolaos Katsiotis, Emmanouil Tzanis, George Batis, Andreas Sapalidis, Alexandros Chatzopoulos, Kosmas Sideris, Margarita Beazi-Katsioti
• Citations: 4 (Details)

• Catalytic Performance of Ti³⁺ Self-Doped V₂O₅-TiO₂ Catalysts for Selective Catalytic Reduction with NH₃, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Kai Zhang, Wei Zhao, Shengping Dou, Qian Wang
• Citations: 4 (Details)

• Recent Development of Sustainable Ecological Flame Retardant Textile Composite Material: A Review, Journal of Materials Science and Chemical Engineering, Vol.10 No.6, 2022
• Golam Mahmud Faysal, Md. Arefin Kowser, Mohammad Abdul Jalil
• Citations: 4 (Details)

• Impact of Single Wavelength (532 nm) Irradiation on the Physicochemical Properties of Sesame Oil, Journal of Materials Science and Chemical Engineering, Vol.10 No.4, 2022
• Alaa Ahmed Mudawi, Ali A. S. Marouf
• Citations: 4 (Details)

• Influence of Different Tougheners on the Properties of PC/PBT Alloy, Journal of Materials Science and Chemical Engineering, Vol.9 No.11, 2021
• Pengwei Shi, Junjie Tang, Hao Duan
• Citations: 4 (Details)

• Industrial Elaboration by Extrusion of PVC Tubes Loaded with Micronized Dura Palm Kernel Shell Powder, Journal of Materials Science and Chemical Engineering, Vol.9 No.10, 2021
• Rolland Djomi, Christian Mbopda Fokam, Florent Biyeme, Chantal Marguerite Mveh, Roland Olembé, Hypolyte Ntede, Ateba Atangana
• Citations: 4 (Details)

• Efficiency and Effectiveness Thermal Analysis of the Shell and Helical Coil Tube Heat Exchanger Used in an Aqueous Solution of Ammonium Nitrate Solubility (ANSOL) with 20% H₂O and 80% AN, Journal of Materials Science and Chemical Engineering, Vol.9 No.6, 2021
• Élcio Nogueira
• Citations: 4 (Details)

• Control of Crystal Size and Morphology of Calcium Carbonate Crystal Polymorphism, Journal of Materials Science and Chemical Engineering, Vol.9 No.4, 2021
• Wakana Nagaki, Norihito Doki, Masaaki Yokota, Kazuo Yamashita, Toshiji Kojima, Toshiyuki Tanaka
• Citations: 4 (Details)

• Influence of Synthesis Parameters on Luminescence of Thenoyltrifluoroacetone Europium Powders, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Dulce Y. Medina-Velazquez, Manuel Barraza, Miguel Barron, Isaias Hileio, Victor Colin
• Citations: 4 (Details)

• Optical, Photoelectrochemical, and Electrochemical Impedance Studies on Photoactive Organic/Inorganic/Interface Assemblies of Poly 2,2 Bithiophene/Poly 3-(2-Thienyl) Aniline (PThA)/TiO₂, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Kasem K. Kasem, Houria Sadou, Henry Worley, Jordan Wenger
• Citations: 4 (Details)

• Alcayota Gum Films: Experimental Reviews, Journal of Materials Science and Chemical Engineering, Vol.6 No.5, 2018
• Marisa Zanon, Martin Masuelli
• Citations: 4 (Details)

• Microstructure, Mechanical Properties (Strength and Hardness) and Wear Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• Joel Hemanth, K. Arasukumar
• Citations: 4 (Details)

• Elasticity Solution of Composite Material Wedge Loaded with a Concentrated Moment, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Gang Wang, Purong Jia, Yongyong Suo, Long Zhang, Leilei Zeng
• Citations: 4 (Details)

• An Artificial Neural Network (ANN) Model for Predicting Water Absorption of Nanoclay-Epoxy Composites, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Guillermina Capiel, Arrosio Florencia, Vera A. Alvarez, Pablo E. Montemartini, Juan Morán
• Citations: 4 (Details)

• Micro-XRF Investigation of Decoration Materials and Painting Techniques in Three 18th-19th Century Mosques in Berat, Albania, Journal of Materials Science and Chemical Engineering, Vol.7 No.5, 2019
• Eglantina Merkaj, Nikolla Civici
• Citations: 4 (Details)

• Copper and Nitrogen Co-Doping Effect on Visible-Light Responsive Photocatalysis of Plasma-Nitrided Copper-Doped Titanium Oxide Film, Journal of Materials Science and Chemical Engineering, Vol.5 No.12, 2017
• Ken-Ichi Hirota, Masahiko Maeda
• Citations: 4 (Details)

• Hole-Buffer Material Derived from Pyrene, Schiff Base and Tris to Enhance Emission Efficiency of Polymer Light-Emitting Diodes, Journal of Materials Science and Chemical Engineering, Vol.6 No.3, 2018
• Jyun-Huei Liou, Ping-Feng Hsu, Yun Chen
• Citations: 4 (Details)

• Evaluation of Carbon Dioxide Absorption Characteristics Lithium Ortho-Silicate in Chemical Heat Storage, Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• Takehiro Esaki, Daichi Iwase, Noriyuki Kobayashi
• Citations: 4 (Details)

• Gas Purification and Quality Control of the End Gas Product, Journal of Materials Science and Chemical Engineering, Vol.5 No.8, 2017
• Konstantin Chuntonov, Alexey O. Ivanov, Boris Verbitsky, Victor L. Kozhevnikov
• Citations: 4 (Details)

• Coordination and Photoisomerization of Azobenzene-Amino Acid Schiff Base Copper(II) Complexes to Lysozyme, Journal of Materials Science and Chemical Engineering, Vol.11 No.3, 2023
• Yuto Kuroda, Ryotaro Miyazaki, Daiki Shimonishi, Daisuke Nakane, Takashiro Akitsu
• Citations: 4 (Details)

• Structural, Optical and Photocatalytic Properties of Cu²⁺ Doped ZnO Nanorods with Using HMTA Solvent Prepared by Hydrothermal Method, Journal of Materials Science and Chemical Engineering, Vol.11 No.7, 2023
• Nguyen Thi Tuyet Mai, Nguyen Thi Lan, Trinh Xuan Anh, Ta Ngoc Dung, Huynh Dang Chinh
• Citations: 4 (Details)

• Localized Theoretical Analysis of Thermal Performance of Individually Finned Heat Pipe Heat Exchanger for Air Conditioning with Freon R404A as Working Fluid, Journal of Materials Science and Chemical Engineering, Vol.11 No.8, 2023
• Élcio Nogueira
• Citations: 3 (Details)

• Study on the Mechanism of Heterogeneous Catalysis (1) —The Measurement of Equilibrium Pressure of Reaction BaCO₃ + C = BaO + 2CO, the Chemical States of Fe in Reaction Tank, and Chemical Reaction Model Catalytic Cycle Mechanism (CRMM), Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Jiamin Jin, Weifan Bao
• Citations: 3 (Details)

• Results from Multi Technique Investigation of Pottery from Different Early Neolithic Sites in Albania, Journal of Materials Science and Chemical Engineering, Vol.5 No.9, 2017
• Erinda Ndreçka, Nikolla Civici, Enkeleida Beqiraj, Ilir Gjipali
• Citations: 3 (Details)

• Long-Term Durability and Reactivation of Thermochemical Heat Storage Driven by the CaO/Ca(OH)₂ Reversible Reaction, Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• Kazuki Kuwata, Takehiro Esaki, Daichi Iwase, Hiroyuki Ito, Shijie Li, Xixian Yang, Hongyu Huang, Noriyuki Kobayashi
• Citations: 3 (Details)

• Improvement of Environmental Stability of the Antireflective Coating by PEG Modified SiO₂ Sol, Journal of Materials Science and Chemical Engineering, Vol.5 No.5, 2017
• Jianbin Feng, Jichen Huang
• Citations: 3 (Details)

• Evolution of Microstructure in a Cu-Cr in situ Composite Produced by Thermo-Mechanical Processing, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Keming Liu, Deping Lu, Kai Fu, Peilan Luo, Zhikai Huang, Wei Guo, Jiuming Yu, Jin Zou, Qiang Hu
• Citations: 3 (Details)

• Thermal Stability and Effect of Heat Treatment on Manganese Doped Silica Borotellurite Glass, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• I. Zaitizila, M. K. Halimah, F. D. Muhammad, M. F. Faznny
• Citations: 3 (Details)

• Experimental Testing and Validation of the Mathematical Model for a Self-Humidifying PEM Fuel Cell, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Ibrahim M. Saleh, Rashid Ali, Hongwei Zhang
• Citations: 3 (Details)

• Modification of Operational Characteristics of Cold Curing Silicon Rubber, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• V. V. Trachevskyi, K. Yu. Ilina, V. E. Yaremenko, M. T. Kartel, Bo Wang
• Citations: 3 (Details)

• Phase Transformation, Technological Properties and Microstructure of Fired Products Based on Clay-Dolomite Mixtures, Journal of Materials Science and Chemical Engineering, Vol.7 No.11, 2019
• B. S. Gonidanga, D. Njoya, G. Lecomte-Nana, D. Njopwouo
• Citations: 3 (Details)

• Study on Modification of Waste Rubber Powder in Cement-Based Composites Mixed with Waste Rubber Powder, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Jianmei Zhou
• Citations: 3 (Details)

• Performance Improvement of Dye-Sensitized Solar Cell by Phenanthrothiadiazole Unit-Based π-Conjugated Bridge, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Xiaoqiang Yu, Yi Wang, Tianyu Huang, Zhenhua Ci, Ming Bao
• Citations: 3 (Details)

• Effect of Laser Texturing Parameters on Wettability of Nickel Surface, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Junyuan Huang, Songbo Wei, Lixin Zhang, Yingying Yang, Song Yang, Zejun Shen
• Citations: 3 (Details)

• Feasibility of Prototyping the Jominy Test Device: Corroborating for Studies and Preliminary Results of the Heating and Data Acquisition Subsystems, Journal of Materials Science and Chemical Engineering, Vol.9 No.3, 2021
• Giulliano A. S. Boaventura, Ramon O. B. Santos, Renann P. Gama, Regina E. S. Cabette, Mariana F. B. Motta, Cesar A. Botura, Adriano C. M. Rosa, Any M. Rosa, Wilson F. Muniz, Carlos D. Jaeger, Luiz F. F. Honorato, Thiago A. Bimestre, Edward P. I. Silva, Beatriz Santos, Livya V. M. Oliveira, Theresa C. G. Venuto, Henrique C. Sampaio, Samuel F. V. Silva, Izabela F. L. Calazans, Felipe A. Santos, Fagner C. F. Santos, Fernando H. A. Oliveira
• Citations: 3 (Details)

• Predicting Mass Transfer Extraction with Steam Flow, Applying Boundary-Layer Concepts, Journal of Materials Science and Chemical Engineering, Vol.9 No.6, 2021
• Jose Antonio Rocha-Uribe, Laura Catalina Soto-Armenta, Alfredo Raul Hernandez-Ruiz, Jorge Ciro Jimenez-Ocaña
• Citations: 3 (Details)

• Long-Term Activity of Thermoplastic Gel Electrolyte in a Photo-Electrochemical Assembly Involving Poly Bithiophene (PBTh) as Photoactive Working Electrode, Journal of Materials Science and Chemical Engineering, Vol.9 No.6, 2021
• Kasem K. Kasem
• Citations: 3 (Details)

• Crystallochemical Characterizations, Raman Spectroscopy and Studies Nuclear Magnetic Resonance (NMR) of Cu₂Zn(Sn, Si)S₄ Compounds for Photovoltaic Applications, Journal of Materials Science and Chemical Engineering, Vol.10 No.1, 2022
• Mohamed Hamdi, Messaoud Benamira
• Citations: 3 (Details)

• Lichen-Based Nano-Particles, an Emerging Antibacterial Approach, Journal of Materials Science and Chemical Engineering, Vol.9 No.8, 2021
• Taswar Ahsan, Liu He, Yu Miao, Bingxue Li, Yuanhua Wu
• Citations: 3 (Details)

• Toughening of Immiscible rPS/SAN Blends by SEBS Elastomers: Properties and Morphology, Journal of Materials Science and Chemical Engineering, Vol.10 No.3, 2022
• Khaled Bedjaoui, Rodrigo Navarro, Rachida Krache, Juan Lopez Valentin, Rebeca Herrero Calderon, Alberto Fernandez Torres, Angel Marcos Fernandez
• Citations: 3 (Details)

• The Impact of Filler Content on Mechanical and Micro-Structural Characterization of Graphite-Epoxy Composites, Journal of Materials Science and Chemical Engineering, Vol.10 No.6, 2022
• Abdullah Shalwan, Fahad Mohammad Alajmi, Naser Alajmi
• Citations: 3 (Details)

• Characterization of Fiber Dust Resulting from Recycling of Carbon Fiber-Reinforced Thermoplastics (CFRP) and Their Cell Toxicity, Journal of Materials Science and Chemical Engineering, Vol.10 No.7, 2022
• Lisa Tölle, Christian Monsé, Nina Rosenkranz, Natalia Haibel, Dirk Walter, Jürgen Bünger, Matthias Hopp, Götz A. Westphal
• Citations: 3 (Details)

• Corrosion Protection of CNTs/CNFs Modified Cement Mortars, Journal of Materials Science and Chemical Engineering, Vol.10 No.8, 2022
• Christina V. Panagiotakopoulou, Panagiotis Papandreopoulos, George Batis
• Citations: 3 (Details)

• Corrosion Behaviors of Sputtered NiTiCu Shape Memory Films, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Nan Ye, Xueping Ren
• Citations: 3 (Details)

• Single-Mode Fabry-Pérot Quantum Cascade Lasers at λ~10.5 μm, Journal of Materials Science and Chemical Engineering, Vol.8 No.3, 2020
• Shouzhu Niu, Junqi Liu, Jinchuan Zhang, Ning Zhuo, Shenqiang Zhai, Xiaohua Wang, Zhipeng Wei
• Citations: 3 (Details)

• Determination of Residual Chlorothalonil in Textiles, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Chengyun Wang, Junfeng Lin, Tangtang Xie, Huiping Zou, Yalei Shen
• Citations: 3 (Details)

• Single-Mode Fabry-Pérot Quantum Cascade Lasers at λ ~10.5 μm, Journal of Materials Science and Chemical Engineering, Vol.8 No.6, 2020
• Shouzhu Niu, Junqi Liu, Jinchuan Zhang, Ning Zhuo, Shenqiang Zhai, Xiaohua Wang, Zhipeng Wei
• Citations: 3 (Details)

• Physical Characterization of Batie and Bandjoun-Djione Sands (West-Cameroon), Used in the Manufacture of Concrete: Improvement of Resistance to Compression, Journal of Materials Science and Chemical Engineering, Vol.8 No.5, 2020
• Jules H. Keyangue Tchouata, Casimir Gouafo, Grégoire Kamdjo, François Ngapgue, Armand S. L. Wouatong
• Citations: 3 (Details)

• Theoretical Analysis of a Shell and Tubes Condenser with R134a Working Refrigerant and Water-Based Oxide of Aluminum Nanofluid (Al₂O₃), Journal of Materials Science and Chemical Engineering, Vol.8 No.11, 2020
• Élcio Nogueira
• Citations: 3 (Details)

• Phase Relations in Si-Al-Y-O-C Systems, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Kan Wu, Laner Wu, Zhenkun Huang, Yong Jiang, Yun Ma
• Citations: 3 (Details)

• Influence of Boundary Conditions on Ceramic/Metal Plates under Ballistic Loads, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Nadda Jongpairojcosit
• Citations: 3 (Details)

• Environmental Friendly Lightweight Material from Natural Fibers of Oil Palm Empty Fruit Bunch, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Andy Cahyaputra Arya, Rully Ario Dewanto Soeriaatmaja, Dorina Hetharia, Indra Surjati, Barlian Nasution, Revina Devi Rubijono, Yohanes Priadi
• Citations: 3 (Details)

• Applications of Potassium Permanganate in the Oxidative Degradation of Trichloroethylene, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Jude O. Ighere, Karina Honjoya, Ramesh C. Chawla
• Citations: 3 (Details)

• High Efficient Synthesis of Enzymatic 2-Ethylhexyl Ferulate at Solvent-Free and Reduced Pressure Evaporation System, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• Kuo-Chuan Huang, Ying Li, Yawo-Kuo Twu, Chwen-Jen Shieh
• Citations: 3 (Details)

• Development of an Analytical Method for Evaluating the Catalytic Active Sites of Titanium Silicalite Zeolite, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• Xiaoyan Huang, Yan Xue, Xin Gao, Baojun Li, Yiqiang Wen, Xiangyu Wang
• Citations: 3 (Details)

• Synthesis of (2S,4S)-2-Substituted-3- (3-Sulfanylpropanoyl)-6- Oxohexahydropyrimidine-4-Carboxylic Acids as Potential Antihypertensive Drugs, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• Andrei Ershov, Dmitry Nasledov, Igor Lagoda, Valery Shamanin
• Citations: 3 (Details)

• Preparation and Characterization of Functionalized Polypropylene with Acrylamide and Itaconic Acid, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• A. R. Oromiehie, H. Ebadi-Dehaghani, K. Ansari, K. Karimi, Z. Rahmani, S. Mirbagheri
• Citations: 3 (Details)

• Use of Corrosion Inhibitor in Solid Form to Prevent Internal Corrosion of Pipelines and Acidification Process, Journal of Materials Science and Chemical Engineering, Vol.2 No.5, 2014
• Fernando B. Mainier, Pedro Ivo Canesso Guimarães
• Citations: 3 (Details)

• Enhancement of InGaN-Based Light Emitting Diodes Performance Grown on Cone-Shaped Pattern Sapphire Substrates, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• Huanyou Wang, Yalan Li, Penghua Zhang
• Citations: 3 (Details)

• Study of Gallium Plating of Metal Electrodes, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• S. V. Gladyshev, R. A. Abdulvaliev, K. O. Beisembekova, G. Sarsenbay
• Citations: 3 (Details)

• Effects of Salt Quenching Temperatures on Microstructure and Creep Properties of a PM Ni-based Superalloy, Journal of Materials Science and Chemical Engineering, Vol.1 No.1, 2013
• Jun Xie, Sugui Tian, Jiao Liu, Xiaoming Zhou
• Citations: 3 (Details)

• Crystallographic Study of the TiO₂ Obtained by Different Synthesis Methods, Journal of Materials Science and Chemical Engineering, Vol.1 No.6, 2013
• Fidel Alejandro Cortez-Lorenzo, Miguel Galván Ruiz, Rufino Nava Mendoza, Mario Enrique Rodriguez García, Rodrigo Rafael Velazquez Castillo
• Citations: 3 (Details)

• A Design Modification Approach to Utilize the Benefits of Metal Additive Manufacturing Adoption, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• Jun Hao Tan, Wee Koon Woon, Wai Leong Eugene Wong
• Citations: 3 (Details)

• Microwave Synthesis and Photocatalytic Properties of CeVO ₄/FeVO₄ Nanocomposites, Journal of Materials Science and Chemical Engineering, Vol.4 No.5, 2016
• Su Chen, Shuibin Yang, Dingjin Fan, Xuehong Liao
• Citations: 3 (Details)

• Study on Water Resistance of Polydopamine Treatment Wood Flour/Polypropylene Composites, Journal of Materials Science and Chemical Engineering, Vol.4 No.5, 2016
• Do Khoa Thi Lanh, Tran Duc Thien
• Citations: 3 (Details)

• Reduction of Dislocation Densities of Ge Layers Grown on Si Substrates by Using Microwave Plasma Heating and Fabrication of High Hole Mobility MOSFETs on Ge Layers, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Hiroki Nakaie, Tetsuji Arai, Chiaya Yamamoto, Keisuke Arimoto, Junji Yamanaka, Kiyokazu Nakagawa, Toshiyuki Takamatsu
• Citations: 3 (Details)

• Finite Element Simulation of Thermal Field in Double Wire Welding, Journal of Materials Science and Chemical Engineering, Vol.4 No.12, 2016
• Xiuzhi Yang, Chunjie Yang, Chunfa Dong, Xinhua Xiao, Wenlin Hua, Xiangjie Wang
• Citations: 3 (Details)

• Suitability of the Composite Made of Multi Wall Carbon Nanotubes-Polyvinylpyrrolidone for Culturing Invertebrate Helix aspersa Neurons, Journal of Materials Science and Chemical Engineering, Vol.5 No.2, 2017
• Juan Bernal-Martinez, Rafael Godínez-Fernández, Alfredo Aguilar-Elguezabal
• Citations: 3 (Details)

• Synthesis, Characterization and Biological Activity Studies on Novel 4-Chloro-2- [(1-Phenyl-1H-Tetrazol-5-Ylimino)-Methyl] Phenol and Its Metal Complexes, Journal of Materials Science and Chemical Engineering, Vol.3 No.10, 2015
• Ranjithreddy Palreddy, Jaheer Mohmed, Nagula Narsimha, Boinala Aparna,   Mariyam, Ch. Sarala Devi
• Citations: 3 (Details)

• Flocculation Efficiency in Taylor-Couette Flow, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Qing Chang, Yuhong Mao, Liyun Zeng, Changquan Yu
• Citations: 3 (Details)

• Hydrophilic Silica/Copolymer Nanoparticles and Protein-Resistance Coatings, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Hongpu Huang, Ling He
• Citations: 2 (Details)

• Carbonization of Chlorinated Organic Residual Liquid for Energy Source Generation, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Yongquan Ge, Wenqi Zhang, Gang Xue, Jiachang Zhao
• Citations: 2 (Details)

• Synthesis of Poly (Ether Ether) Ketone Sulfonated Membrane with Tin Dioxide Particles, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Liz Contino Vianna de Aguiar, Florêncio Gomes de Ramos Filho, Carla Akimi Kawaguti, Ailton de Souza Gomes
• Citations: 2 (Details)

• Contamination Precautions for Chemicals Which May Be Used in Drinking Water Treatment, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Fernando B. Mainier, Leandro Pontual, Rosana Therezinha Q. de Oliveira, Isabela de Oliveira Santos
• Citations: 2 (Details)

• Influence of Nano-Barium Sulfate Agglomeration on Microstructure and Properties of the Hardened Cement-Based Materials, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Mohamed El-Shahate Ismaiel Saraya, Inas Mostafa Bakr
• Citations: 2 (Details)

• Physicochemical Properties of Thin Rhenium Chalcogenides Coatings, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• E. A. Salakhova, D. B. Tagiyev, P. E. Kalantarova, K. F. Ibrahimova
• Citations: 2 (Details)

• Characterization of InGaN Solar Cells, Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
• Nor Bochra, Bousaid Abdelhak
• Citations: 2 (Details)

• Composites on Base of the Ultradispersed Polytetrafluoroethylene and Graphite Oxide Intercalated Compounds, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• Vitaly I. Saldin, Alexander K. Tsvetnikov
• Citations: 2 (Details)

• Characterization of Nickel Alloy 600 with Ultra-Fine Structure Processed by Severe Plastic Deformation Technique (SPD), Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• Waldemar Alfredo Monteiro, Silvio Luis Ventavele da Silva, Luciana Ventavele da Silva, Arnaldo Homobono Paes de Andrade, Luis Carlos Elias da Silva
• Citations: 2 (Details)

• Ohmic Contact Formation for n+4H-SiC Substrate by Selective Heating Method Using Hydrogen Radical Irradiation, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Tetsuji Arai, Kazuki Kamimura, Chiaya Yamamoto, Mai Shirakura, Keisuke Arimoto, Junji Yamanaka, Kiyokazu Nakagawa, Toshiyuki Takamatsu, Masaaki Ogino, Masaaki Tachioka, Haruo Nakazawa
• Citations: 2 (Details)

• “Life, Memory, Recognition and Aging” of Grey Tin, Journal of Materials Science and Chemical Engineering, Vol.4 No.11, 2016
• A. D. Styrkas
• Citations: 2 (Details)

• An Experimental Investigation into the Amalgamated Al₂O₃-40% TiO₂ Atmospheric Plasma Spray Coating Process on EN24 Substrate and Parameter Optimization Using TLBO, Journal of Materials Science and Chemical Engineering, Vol.4 No.6, 2016
• Thankam Sreekumar Rajesh, Ravipudi Venkata Rao
• Citations: 2 (Details)

• Impact of Die Materials on the Effect of New Polymer Processing Aids for Sharkskin Properties, Journal of Materials Science and Chemical Engineering, Vol.4 No.9, 2016
• Seyed Pooyan Sajjadi
• Citations: 2 (Details)

• Synthesis, Characterization and Performance of a New Type of Alkylene Triphenyl Double Quaternary Phosphonium Salt, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Wei Wei, Bin Yuan, Song Lv, Qifeng Liao, Jieyang Huang
• Citations: 2 (Details)

• Highly Dispersed Cu-Base Catalyst Derived from Layered Double Hydroxides for CO Hydrogenation, Journal of Materials Science and Chemical Engineering, Vol.2 No.6, 2014
• Xinyou Han, Kegong Fang, Minggui Lin, Yuhan Sun
• Citations: 2 (Details)

• Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair
• Citations: 2 (Details)

• Influence of pH and Ultrasonic Treatment on Preparation of Titanium Phosphates and Their Powder Properties, Journal of Materials Science and Chemical Engineering, Vol.2 No.5, 2014
• Hiroaki Onoda, Syohei Fujikado
• Citations: 2 (Details)

• The Abrasive Wear of Non-Oxide Structural Ceramics in Wet Environment, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Z. Pędzich, G. Grabowski, I. Saferna, M. Ziąbka, A. Gubernat, J. Szczerba, M. M. Bućko, M. Kot
• Citations: 2 (Details)

• Defects Interaction on the Mechanical Properties during Transition Formation of (Mo, Cr)₃Si Intermetallic Alloys, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• I. Rosales, H. Martínez
• Citations: 2 (Details)

• Addition of Pyridine to Dye-Sensitized Solar Cell Including Fluorinated Oligomer Gel Electrolyte, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Masato Ohmukai, Jun Kyokane
• Citations: 2 (Details)

• Influence of Insertion of the Last Sense Codon on Expression Efficiency of Green Fluorescent Protein Gene in Escherichia coli, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• Xiaoliang Hao, Shota Inoue, Masahide Ishikawa
• Citations: 2 (Details)

• Formulation of Mixed-Matrix Membrane (PSF/Zeolite) for CO₂/N₂ Separation: Screening of Polymer Concentration, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Chen Chee Lek, Sunarti Abd Rahman
• Citations: 2 (Details)

• Determination of Molecular Mass of Strong Acids by Differential Temperature Model (DTM) Using H₃PO₄ and HBF₄ for Classical Demonstration, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• I. A. Akpan
• Citations: 2 (Details)

• Preliminary Informative Results on Glass Tesserae from V^th-VI^th Century AD Mosaics in Albania, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Esmeralda Vataj, Nikolla Civici, Teuta Dilo
• Citations: 2 (Details)

• The Preparation and Catalytic Performance of Nanoporous CuO/CeO₂ Composites, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• Caihua Wei, Xiaolong Zhang, Feifei Lu, Yanyan Song, Zhanbo Sun
• Citations: 2 (Details)

• Chemical Heat Storage Using an SiC Honeycomb Packed with CaCl₂ Powder, Journal of Materials Science and Chemical Engineering, Vol.8 No.11, 2020
• Atsuhiro Ichinose, Kazuki Kuwata, Takehiro Esaki, Takayuki Matsuda, Noriyuki Kobayashi
• Citations: 2 (Details)

• Fluoride-Responsive Organogel Based on Hydrazide Derivatives, Journal of Materials Science and Chemical Engineering, Vol.8 No.12, 2020
• Guanghui Lv, Lirong Lin, Xinyang Chen, Chaoran Chen, Lei Huang, Hong Xin
• Citations: 2 (Details)

• Review on the study of Nonlinear Optics of Iridium Metal Organic Complex, Journal of Materials Science and Chemical Engineering, Vol.9 No.2, 2021
• Lu Li, Huajian Duan, Jun Qian
• Citations: 2 (Details)

• The Power-Energy Coupling Effect of Mixed Hard-Carbon/Graphite Anode, Journal of Materials Science and Chemical Engineering, Vol.9 No.1, 2021
• Yanli Yin, Chao Shen, Steven Yturriaga, Jim P. Zheng
• Citations: 2 (Details)

• Synthesis of Graphene Oxide from Hydrogenated Diamond Like Carbon and Protein Immobilization onto It: Characterization and Study of Practical Utility, Journal of Materials Science and Chemical Engineering, Vol.9 No.1, 2021
• Subhashis Bala, Reshmi Bose, Shaona Chaterjee, Sanjit Sarkar, Indranil Saha, Hari Shankar Biswas
• Citations: 2 (Details)

• Yeast-TiO₂ Biotemplate for Oxytetracycline Solar Photodecomposition, Journal of Materials Science and Chemical Engineering, Vol.8 No.7, 2020
• Nilce Ortiz, Lucia Nascimento, Fernanda Maichin, Izabela Rodrigues Cerqueira Lima Azevedo, Marília Guerino Vieira
• Citations: 2 (Details)

• Investigation of Changes in the Fine Structure of Graphitizing Carbon Materials during Heat Treatment by X-Ray Diffraction Analysis, Journal of Materials Science and Chemical Engineering, Vol.8 No.10, 2020
• Vasiliy A. Tyumentsev, Alfiya G. Fazlitdinova
• Citations: 2 (Details)

• Surface Modifications of Cellulose Acetate Film for the Application of Face Shield, Journal of Materials Science and Chemical Engineering, Vol.8 No.8, 2020
• Sunwoo E. Lee
• Citations: 2 (Details)

• A Method for Rapid Determination of Polymer Dissolution Time, Journal of Materials Science and Chemical Engineering, Vol.8 No.5, 2020
• Juan Zhao, Jian Zhang, Wensen Zhao, Wenjuan Chen, Haiyan Guo, Quan Wang, Zhao Hua, Guang Yang
• Citations: 2 (Details)

• The Selection and Application of Anticorrosive Materials for Flue Gas Desulfurization (FGD) System in Cement Plant, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Yuyun Liao
• Citations: 2 (Details)

• The Effect of Quartz Window on Bistability of the Silicon Wafer in Lamp-Based Reactor, Journal of Materials Science and Chemical Engineering, Vol.8 No.1, 2020
• Valeriya P. Prigara, Aleksandr N. Kupriyanov, Vladimir V. Ovcharov
• Citations: 2 (Details)

• Physico-Chemical Characterization and Stability Study in Acidic and Basic Solution of Ceramic Filters from Mouka’s Clay (Cameroon), Journal of Materials Science and Chemical Engineering, Vol.7 No.11, 2019
• Ngiongboung Nguiamba, Placide Désirée Belibi Belibi, Joseph Marie Sieliechi, Martin Benoît Ngassoum
• Citations: 2 (Details)

• Flexible Zinc-Manganese Dioxide Alkaline Batteries Based on Kelp Electrolytes, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Shuyang Wang, Xiayue Fan
• Citations: 2 (Details)

• Mathematical Modeling and Inverse Analysis for Microbial Depolymerization Processes of Xenobiotic Polymers, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Masaji Watanabe, Fusako Kawai
• Citations: 2 (Details)

• The Challenges of Microelectronics for the Future Digital Society: The Roles of Thin Film Technologies and of the Higher Education, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• O. Bonnaud
• Citations: 2 (Details)

• Electrochemical and Surface Characterization Studies of 2-amino-6-methyl-5-oxo-4-phenyl-5,6-dihydro-4H-pyrano[3,2-c]quinoline-3-carbonitrile Compound on Copper in 2 M HNO₃, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Ahmed M. Eldesoky, Azza M. Attia, Omayma E. Ahmed, Mohamed A. Abo-Elsoud
• Citations: 2 (Details)

• A Binder-Free Amorphous Manganese Dioxide for Aqueous Zinc-Ion Battery, Journal of Materials Science and Chemical Engineering, Vol.10 No.6, 2022
• Qianqian Yu, Guojiang Wu
• Citations: 2 (Details)

• Kinetic Study of Methanol Dehydration to Dimethyl Ether in Catalytic Packed Bed Reactor over Resin, Journal of Materials Science and Chemical Engineering, Vol.10 No.6, 2022
• Ghassan J. Hadi, Arkan J. Hadi
• Citations: 2 (Details)

• Production of Sucrose Crystals of Uni-Modal Size Distribution by Seeded Batch Cooling Crystallization, Journal of Materials Science and Chemical Engineering, Vol.10 No.11, 2022
• Norihito Doki, Shunsuke Kayamori, Masaaki Yokota, Takahiro Nemoto, Yoshikazu Kato
• Citations: 2 (Details)

• Discharge Characteristic of Micro-Arc Oxidation on Aluminum Alloy under the Changing Electrolyte Temperature, Journal of Materials Science and Chemical Engineering, Vol.10 No.11, 2022
• Hongwei Yang, Xin Wang, Zongtao Zhu, Ruilin Liu
• Citations: 2 (Details)

• Investigation into the Computational Costs of Using Genetic Algorithm and Simulated Annealing for the Optimization of Explicit Friction Factor Models, Journal of Materials Science and Chemical Engineering, Vol.10 No.12, 2022
• Sunday Boladale Alabi, Abasiyake Uku Ekpenyong
• Citations: 2 (Details)

• Crystal Phases and Chemical Stabilities of YSi₂ Powders Fabricated from Low and High Purity Si and Y Powders, Journal of Materials Science and Chemical Engineering, Vol.10 No.2, 2022
• Ren Matsushima, Mikito Kitayama
• Citations: 2 (Details)

• Direct Synthesis of Graphene on Silicon at Low Temperature for Schottky Junction Solar Cells, Journal of Materials Science and Chemical Engineering, Vol.9 No.10, 2021
• Sudip Adhikari, Rucheng Zhu, Masayoshi Umeno
• Citations: 2 (Details)

• Effect of Substrate Nature on the Structural, Optical and Electrical Properties of In2S3 Thin Films, Journal of Materials Science and Chemical Engineering, Vol.10 No.5, 2022
• Fethi Aousgi, Youssef Trabelsi, Aoussaj Sbai, Billel Khalfallah, Radhouane Chtourou
• Citations: 2 (Details)

• Features of the Conductivity of the Ag₈Ge_1-xMn_xTe₆ Solid Solutions, Journal of Materials Science and Chemical Engineering, Vol.10 No.5, 2022
• Rashad Rahimov, Aynur Gahramanova, Durdana Arasly, Almaz Halilova, Ilgar Mammadov
• Citations: 2 (Details)

• The Relationship of Microstructure, Density and Bending Strength Properties of Blighia sapida, Journal of Materials Science and Chemical Engineering, Vol.10 No.5, 2022
• Gladys A. Quartey
• Citations: 2 (Details)

• Intercalation of Ciprofloxacin in Naturally Occurring Smectite from Bana: Potentiality as Drug Delivery System and Antimicrobial Effects on Escherichia coli and Staphylococcus aureus, Journal of Materials Science and Chemical Engineering, Vol.9 No.8, 2021
• Carine Feudjio Memenfo, Nicolas Tabary, Jean Aimé Mbey, Stéphanie Degoutin, Frédéric Cazaux, Maryse Bacquet, Mickaël Maton, Bernard Martel, Daniel Njopwouo
• Citations: 2 (Details)

• Discussion on New Evaluation Technology of Non-Metallic Composite Continuous Pipe for Oil and Gas Field, Journal of Materials Science and Chemical Engineering, Vol.9 No.12, 2021
• Xuehua Cai, Xiaodong Shao, Zhao Zhang, Han Ding, Guoquan Qi, Houbu Li
• Citations: 2 (Details)

• Computational Study of the Formation Reaction of Polyacid Precursors of Glass-Ionomer Materials, Journal of Materials Science and Chemical Engineering, Vol.9 No.8, 2021
• Jair Gaviria, Jairo Quijano, Pablo Ruiz
• Citations: 2 (Details)

• Preparation of Cu@Ag Nanoparticles for Conductive Ink, Journal of Materials Science and Chemical Engineering, Vol.9 No.9, 2021
• Sijie Wang, Helong Yu
• Citations: 2 (Details)

• A Mini Review on Testing Methods for Mechanical Properties of Natural Fibre Honeycomb Sandwich Structure and Fractography Analysis, Journal of Materials Science and Chemical Engineering, Vol.9 No.5, 2021
• Nahiyan Al-Azad, Nur Hafidah Binti Dedifitrianto, Mohd. Kamal Mohd. Shah
• Citations: 2 (Details)

• Optical Properties of Chiral Azo-Schiff Base Mn(II) and Zn(II) Complexes with Silver Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.9 No.4, 2021
• Kazuya Saiga, Tomoyuki Haraguchi, Yasutaka Kitahama, Takuya Hosokai, Hiroyuki Matsuzaki, Dohyun Moon, Mutsumi Sugiyama, Michikazu Hara, Takashiro Akitsu
• Citations: 2 (Details)

• Lithium Recovery from Electrodes in Cellphone Batteries through the Leaching Process with Organic Agents Assisted by Ultrasound, Journal of Materials Science and Chemical Engineering, Vol.6 No.9, 2018
• Pedro A. Martínez, Juan C. Orozco, Alejandro Alonso, Rosa M. Luna, Miguel A. Barron, Dulce Y. Medina, Elizabeth Garfias-García
• Citations: 2 (Details)

• First Principles Calculations of Hydrogen Storage on Calcium-Decorated, Boron-Doped Bilayer Graphene, Journal of Materials Science and Chemical Engineering, Vol.6 No.11, 2018
• Xiaojing Zhu
• Citations: 2 (Details)

• The Aggregation of Bentonite Using Poly(N-isopropylacrylamide) as a Flocculant, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Ayano Nakamura, Kenji Murakami
• Citations: 2 (Details)

• Adaptability of Polymer-Containing Sewage Corrosion Inhibitor, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Limei Sun, Chunxi Gao, Wenmiao Gao, Jie Cui, Jianhua Xu
• Citations: 2 (Details)

• Computation of Energy, Intensity and Thermodynamic Parameters for the Interaction of Ln(III) with Nucleic Acid: Analysis of Structural Conformations, Chemical Kinetics and Thermodynamic Behaviour through 4f-4f Transition Spectra as Probe, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• N. Bendangsenla, T. Moainla, Juliana Sanchu, M. Indira Devi
• Citations: 2 (Details)

• Quasi In-Situ Study on Microstructure Evolution of Al 2014 Alloy during Thermal Deformation and Following Solution Treatment, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Hailong Cao, Yuxing Tian, Ningjie Gu, Lifang Chen, Cheng Liu
• Citations: 2 (Details)

• Enhancement in Thermal Stability of Polyoxymethylene (POM)-Based Biopolymer Blend Materials, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• Jitlada Boonlertsamut, Supaphorn Thumsorn, Toshikazu Umemura, Hiroyuki Hamada, Atsushi Sakuma
• Citations: 2 (Details)

• Combustion Synthesis of MgSiN₂ Powder at Different Nitrogen Pressures, Journal of Materials Science and Chemical Engineering, Vol.7 No.10, 2019
• Mingu Zhou, Senjing Zhang, Qingda Li, Xuemei Yi
• Citations: 2 (Details)

• The Coordination Compound of Ga(III) with Stillbazo in the Presence of Cetyl Pyridinium Chloride as a Surface Active Compound, Journal of Materials Science and Chemical Engineering, Vol.7 No.10, 2019
• Shahin M. Bayramov, Aydin M. Pashajanov, Gulu G. Abbasova, Melahat I. Ganbarova, Sona M. Gasanova
• Citations: 2 (Details)

• Analytical Application of Ion Associates of Molybdenum with Dithiolphenols and Aminophenols, Journal of Materials Science and Chemical Engineering, Vol.7 No.4, 2019
• K. A. Kuliev, N. A. Verdizade, S. G. Aliev, U. B. Abasquliyeva, N. N. Efendieva
• Citations: 2 (Details)

• Synthesis of P4VP-b-PBLG Diblock Copolymers and Their Self-Assembly Behavior, Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019
• Xinshu Huang, Zhen Liu, Xiaohua He
• Citations: 2 (Details)

• Effect of Synthetic Parameters on Synthesis of Magnesium Aluminum Spinels, Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019
• Jinxia Duan, Xiuhui Wang, Youfei Zhang, Hong Gao, Yan Xie, Jinlong Yang
• Citations: 2 (Details)

• Study on the Mechanism of Heterogeneous Catalysis (2)
  —The Relative Catalytic Activities of Fe, Co, Ni, Cu, Ag and SiO2 in the Carbon Catalyzed Gasification Reaction, Journal of Materials Science and Chemical Engineering, Vol.6 No.4, 2018
• Jiamin Jin, Weifang Bao
• Citations: 2 (Details)

• Study on the Mechanism of Heterogeneous Catalysis (3) —The Catalysis of W, Mo, S and SiO₂ on Carbon Dissolving and Mechanism of Carbon Dissolving in the Iron-Graphite Compact, Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• Jiamin Jin, Tou Hong, Juqing Wu
• Citations: 2 (Details)

• Synthesis of MgSiN₂ Powders from the Mg-Si System, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Ran Guo, Xuemei Yi, Xiongzhang Liu, Qingda Li, Takahiro Nomura
• Citations: 2 (Details)

• Effects of Content of Chopped Glass Fibers on the Properties of Silica Filled PTFE Composites, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Ying Yuan, Haodong Lin, Zehua Jiang, Zhifeng Chi, Minghao Yao, Shuren Zhang
• Citations: 2 (Details)

• Effect of Silicon Carbide and Titanium Hydride on the Foamability of Aluminum Alloy (6061), Journal of Materials Science and Chemical Engineering, Vol.5 No.6, 2017
• Mohammad M. Hailat
• Citations: 2 (Details)

• ZnO Films Deposited on Porous Silicon by DC Sputtering, Journal of Materials Science and Chemical Engineering, Vol.5 No.6, 2017
• Masato Ohmukai, Takuya Nakagawa, Ayumu Matsumoto
• Citations: 2 (Details)

• Advanced Catalytic Membrane Characterisation and Gas Permeation Properties for Enhanced Ethyl Lactate Conversion, Journal of Materials Science and Chemical Engineering, Vol.5 No.3, 2017
• Edidiong Okon, Habiba Shehu, Ifeyinwa Orakwe, Edward Gobina
• Citations: 2 (Details)

• The Properties of Elasticity, Thermology, and Anisotropy in Pd-Based Alloys, Journal of Materials Science and Chemical Engineering, Vol.5 No.3, 2017
• Kuankuan Chen, Meng Hu, Chunmei Li, Guannan Li, Zhiqian Chen
• Citations: 2 (Details)

• Preparation of the Natural Zeolite Based Catalyst for Hydrocracking Process of Petroleum Derived Atmospheric Residue, Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• Tserendorj Tugsuu, Yoshikazu Sugimoto, Byambajav Enkhsaruul
• Citations: 2 (Details)

• Determination of Catalytic Rate Constants towards Polymeric Conversion to Synthetic Oils: Bridging the Gap between Kinetics and Thermodynamics, Journal of Materials Science and Chemical Engineering, Vol.5 No.8, 2017
• Zharama M. Llarena
• Citations: 2 (Details)

• Investigation of Pottery from Different Neolithic Sites in Southeast Albania Using Various Analytical Techniques, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Erinda Ndreçka, Nikolla Civici, Ilir Gjipali, Filippo Niccolai, Stefano Ridolfi
• Citations: 2 (Details)

• Investigation of Organic Matter Extraction from Moroccan Oil Shale, Journal of Materials Science and Chemical Engineering, Vol.11 No.8, 2023
• Abdelkrim Abourriche, Abdelaziz Benhammou, Younes Abouliatim, Yassine Rakcho, Said Mansouri, Mossaab Mouiya, Jones Alami, Hassan Hannache
• Citations: 2 (Details)

• Modelling and Response Surface Optimisation of Methyl Violet Removal by a Mixture of Titaniferous Sand and Non-Activated Attapulgite, Journal of Materials Science and Chemical Engineering, Vol.10 No.9, 2022
• Kalidou Ba, Alpha Ousmane Toure, Mouhamed Ndoye, Falilou Mbacke Sambe
• Citations: 2 (Details)

• Kinetic and Thermodynamic Study of the Elimination of Remazol Black on Activated Carbon Based on Ricinodendron heudelotii Shells, Journal of Materials Science and Chemical Engineering, Vol.11 No.9, 2023
• Kouakou Yao Urbain, Kambiré Ollo, Eroi N’goran Sévérin, Koné Yétchié Tchonrontcha, Trokourey Albert
• Citations: 2 (Details)

• Alkali Ionic Conductivity in Inorganic Glassy Electrolytes, Journal of Materials Science and Chemical Engineering, Vol.11 No.7, 2023
• Ram Krishna Hona, Mandy Guinn, Uttam S. Phuyal, S’Nya Sanchez, Gurjot S. Dhaliwal
• Citations: 2 (Details)

• Effectiveness of Rice Husk and Sugarcane Bagasse Ashes Blended Cement in Improving Properties of Concrete, Journal of Materials Science and Chemical Engineering, Vol.11 No.8, 2023
• Johnson Adegaye Adebola, Catherine Mayowa Ikumapayi, Chinwuba Arum
• Citations: 2 (Details)

• Distribution of 26 Metals in the Waters of the Aquatic Ecosystems of the Cotonou Channel and Lake Nokoué, Benin, Journal of Materials Science and Chemical Engineering, Vol.11 No.2, 2023
• Alassane Youssao Abdou Karim, Acakpo Nonvignon Magloire Gbaguidi, Kpessou Martin Vitus Mickael Saizonou, Léonce Firmin Dovonon, Gabin Laly, Abdoul Kader Alassane Moussa, Emmanuel Azokpota, Fabienne Seby, Olivier Donard, Houénoukpo Henri Soclo
• Citations: 2 (Details)

• Green Synthesis of Titanium Oxide Nanoparticles Using Natural Extracts, Journal of Materials Science and Chemical Engineering, Vol.11 No.2, 2023
• Maribel Santiago, Daniela Rivera, Agustín Torres
• Citations: 2 (Details)

• The Effects of Degradation Phenomena of the Steel-Concrete Interface in Reinforced Concrete Structures, Journal of Materials Science and Chemical Engineering, Vol.11 No.3, 2023
• Bozabe Renonet Karka, Bassa Bruno, Nadjitonon Ngarmaïm, Alladjo Rimbarngaye
• Citations: 2 (Details)

• High-Throughput Growth of Hexagonal Boron Nitride Film Using Porous-Structure Isolation Layer, Journal of Materials Science and Chemical Engineering, Vol.11 No.3, 2023
• Ruitao Jia, Fangzhu Qing, Xuesong Li
• Citations: 1 (Details)

• Specific Heat Capacity of A₂FeCoO_6-δ (A = Ca or Sr), Journal of Materials Science and Chemical Engineering, Vol.11 No.4, 2023
• S’Nya Sanchez, Mandy Guinn, Uttam S. Phuyal, Gurjot S. Dhaliwal, Ram Krishna Hona
• Citations: 1 (Details)

• Phytochemical Screening and Chromatographic Purification of Bauhunia semibifida ROXB Hexane-Dichloromethane Leaf Extract, Journal of Materials Science and Chemical Engineering, Vol.11 No.7, 2023
• Ikenna Obiora Alaekwe, Vincent Ishmel Egbulefu Ajiwe, Chinedu Chris Aguoma
• Citations: 1 (Details)

• Investigation of the Potential of Using Liquid Rubbers in Rubber Industry, Journal of Materials Science and Chemical Engineering, Vol.11 No.9, 2023
• Emine Demir, Gasim Altundal, Husnu Gerengi, Canan Yüksel
• Citations: 1 (Details)

• Diagnosis of Wastewater Contamination by Metalic Trace Elements (MTE) in the Areas of Yopougon (South Abidjan) and Marcory, Koumassi (North Abidjan) from March to July 2021, Journal of Materials Science and Chemical Engineering, Vol.11 No.10, 2023
• Lydie Nina Amon, Aboubakar Sidik Diaby, Alfred Niamien Kouamé, Kouamé Eric Yao, Ali Sanou, Léon Koffi Konan, Kalpy Julien Coulibaly, Mireille Dosso
• Citations: 1 (Details)

• Annealing Temperature-Dependent Luminescence Color Coordination in Eu-Doped AlN Thin Films, Journal of Materials Science and Chemical Engineering, Vol.12 No.1, 2024
• Yingda Qian, Mariko Murayama, Sujun Guan, Xinwei Zhao
• Citations: 1 (Details)

• The Crystal Structure Study of CaSrFe_0.75Co_0.75Mn_0.5O_6−δ by Neutron Diffraction, Journal of Materials Science and Chemical Engineering, Vol.12 No.1, 2024
• Amara Martinson, Mandy Guinn, Ram Krishna Hona
• Citations: 1 (Details)

• Hexavalent Chromium Cr (VI) Removal from Water by Mango Kernel Powder, Journal of Materials Science and Chemical Engineering, Vol.12 No.1, 2024
• Amadou Sarr Gning, Cheikh Gaye, Antoine Blaise Kama, Pape Abdoulaye Diaw, Diène Diégane Thiare, Modou Fall
• Citations: 1 (Details)

• Active Truss Metamaterials: Modelling and Tuning of Band Gaps, Journal of Materials Science and Chemical Engineering, Vol.11 No.8, 2023
• Daniel Calegaro, Stefano Mariani
• Citations: 1 (Details)

• Investigation of Carrier Conduction Mechanism over InAs/InP Quantum Dashes and InAs/GaAs Quantum Dots Based p-i-n Laser Heterostructures, Journal of Materials Science and Chemical Engineering, Vol.5 No.9, 2017
• Neslihan Ayarcı Kuruoğlu, Orhan Özdemir, Kutsal Bozkurt
• Citations: 1 (Details)

• Low Temperature Synthesis of Zeolites of the Faujasite Family (FAU-EMT) Using Industrial Mineral Waste (FR) from Silane Production, Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017
• Valeriy Petrov, Josef-Christian Buhl
• Citations: 1 (Details)

• Microwave Synthesis and Photoluminescence Properties of BaWO₄ of Homogeneous Double Cone Structure, Journal of Materials Science and Chemical Engineering, Vol.5 No.4, 2017
• Dengfeng Wu, Shihao Luo, Shuibin Yang, Xuehong Liao
• Citations: 1 (Details)

• Reaction Rate Constant Evaluation of Thermal Isomerization of α-Pinene, Journal of Materials Science and Chemical Engineering, Vol.5 No.5, 2017
• Wei Zhang, Ming Li, Tao Zhang, Lei Wang
• Citations: 1 (Details)

• Effect of Residual Maleic Anhydride in PP-g-MAH on the Thermo-Oxidative Aging Properties of RGF-PP, Journal of Materials Science and Chemical Engineering, Vol.5 No.7, 2017
• Junjie Tang, Pengwei Shi, Hao Duan, Kwang-Yoon Kim, Minqi Xin
• Citations: 1 (Details)

• Densification and Microstructure of Fluorapatite Sintered with Alkaline and Alkaline-Earth Additives, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Mustapha Hidouri, Faycal Ben Tahar, Khaled Bouzouita
• Citations: 1 (Details)

• Phosphorus Adsorption and Nitric Acid Reduction by Ferrous Sulfate-Treated Foamed Waste Glass, Journal of Materials Science and Chemical Engineering, Vol.6 No.3, 2018
• Asmak Afiliana, Harada Hiroyuki, Katayama Yumi, Nishikawa Hanami, Mitoma Yoshiharu, Tomoyuki Miyamoto
• Citations: 1 (Details)

• On the Atomic Kinetic Energies in Ceramic Oxides, Journal of Materials Science and Chemical Engineering, Vol.5 No.12, 2017
• Yacov Finkelstein, Raymond Moreh, Rony Shneck
• Citations: 1 (Details)

• Tuning Polymer-Grafted Particle Monolayer Structure at the Air-Water Interface by Introducing Anisotropic Features, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Emiko Mouri, Yo Yamasaki, Motokazu Terada
• Citations: 1 (Details)

• Photodegradation and Aggregation Prevention of Natural Melanin Nanoparticles by Silica Coating Method, Journal of Materials Science and Chemical Engineering, Vol.6 No.1, 2018
• Yujia Liang, Lu Sun, Xungai Wang
• Citations: 1 (Details)

• Synthesis of Zeolite LTN-(SOD) Self-Supporting Membranes from SiO2-Rich Industrial Waste, Journal of Materials Science and Chemical Engineering, Vol.6 No.3, 2018
• Valeriy Petrov, Josef-Christian Buhl
• Citations: 1 (Details)

• Optimization of Fixed-Bed Design for Natural Gas Mercury Removal by Sulfur Doped into Porous Activated Carbon, Journal of Materials Science and Chemical Engineering, Vol.7 No.2, 2019
• Delphine Mukamurara, Xuewu Liu, Shuhua Chen, Shangshang Ren, Jean Claude Munyemana, Jiupeng Zou
• Citations: 1 (Details)

• Nanocoatings on 2D Macroporous Silicon Structures, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• Liudmyla Karachevtseva, Mykola Kartel, Bo Wang, Oleg Lytvynenko, Yurii Sementsov
• Citations: 1 (Details)

• Synthesis of a New Lopinavir Phosphinic Analog as HIV-1 Inhibitor, Journal of Materials Science and Chemical Engineering, Vol.7 No.7, 2019
• Ruba Kellow, Magdalini Matziari
• Citations: 1 (Details)

• Physical Properties Study of Zn_0.5Mn_0.5−xLi_2xFe₂O₄ Nanoparticle Series that Prepared by Co-Precipitation Method, Journal of Materials Science and Chemical Engineering, Vol.7 No.11, 2019
• N. A. Elthair, Yousef A. Alsabah, Eltayeb M. Mustafa, Abdelrahman A. Elbadawi, Abdal Sakhi Suliman, Ali A. S. Marouf
• Citations: 1 (Details)

• Synthesis and Characterization of Heat Treated Cu-Al alloys for Energy Applications, Journal of Materials Science and Chemical Engineering, Vol.7 No.11, 2019
• J. Pereyra-Hernández, O. Ocampo, R. A. Falcon-Castrejon, I. Rosales-Cadena, J. A. Ruiz-Ochoa
• Citations: 1 (Details)

• Cocoa Cortex Ashes as Fluxing Additive for Vitrified Ceramic Making from Alluvial Clay, Journal of Materials Science and Chemical Engineering, Vol.7 No.10, 2019
• E. J. A. Ndzana, D. Njoya, A. Elimbi, G. V. Ranaivoarivo, G. Lecomte-Nana, A. N. Nzeukou, D. Njopwouo
• Citations: 1 (Details)

• The Microstructure and Properties of Copper with Ceria Nanoparticles Addition, Journal of Materials Science and Chemical Engineering, Vol.7 No.10, 2019
• Daniela Passarelo Moura da Fonseca, Waldemar Alfredo Monteiro
• Citations: 1 (Details)

• Experimental Study of the Phase Equilibria in the R-Al-Si Ternary Systems (R: Rare Earth Element) the Ho-Al-Si Isothermal Section at 500?C, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Anna Maria Cardinale, Nadia Parodi
• Citations: 1 (Details)

• Study of Chemical Etching and Chemo-Mechanical Polishing on CdZnTe Nuclear Detectors, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• Aaron L. Adams, Stephen U. Egarievwe, Ezekiel O. Agbalagba, Rubi Gul, Anwar Hossain, Utpal N. Roy, Ralph B. James
• Citations: 1 (Details)

• Stoneware Ceramic Synthesis with Iron Sand as a Filler Material, Journal of Materials Science and Chemical Engineering, Vol.7 No.8, 2019
• I Komang Wahyu Surya Permana, Ida Bagus Alit Paramarta, Arifin Siagian, Made Sumadiyasa
• Citations: 1 (Details)

• Study on Cellulase Gene Expressed in Pichia pastoris and Analyses of Its Biochemical Characters, Journal of Materials Science and Chemical Engineering, Vol.6 No.7, 2018
• Min Lu, Juan Chang, Ping Wang, Qingqiang Yin, Xiaowei Dang, Tianzeng Gao, Fushan Lu
• Citations: 1 (Details)

• Study on the Mechanism of Heterogeneous Catalysis (4)—Electron Cyclic Donate-Accept Catalysis Mechanism-ECDAM or Electron Orbital Deformation-Reversion Cyclic Catalysis Mechanism-EODRM, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Jiamin Jin, Weifang Bao
• Citations: 1 (Details)

• Simulation of Substrate Temperature Distribution in Diamond Films Growth on WC-Co Tools Using HFCVD Method, Journal of Materials Science and Chemical Engineering, Vol.6 No.8, 2018
• Jianguo Zhang, Yigao Yuan, Jinjiang Zhang
• Citations: 1 (Details)

• Residual Stress Distribution of Asymmetric Quenching in Al-Zn-Mg-Cu Aluminum Alloy Plate, Journal of Materials Science and Chemical Engineering, Vol.9 No.4, 2021
• Yanan Li, Guohui Shi
• Citations: 1 (Details)

• Oxidation Performance of Ytterbium Disilicate/Silicon Environmental Barrier Coating via Optimized Air Plasma Spraying, Journal of Materials Science and Chemical Engineering, Vol.9 No.4, 2021
• Yingjie Jian, Yanfei Wang, Rongjun Liu, Fan Wan
• Citations: 1 (Details)

• Amelotin-Mediated Crystals Assembly in Liquid-Phase and on Tooth Surface, Journal of Materials Science and Chemical Engineering, Vol.9 No.7, 2021
• Xiaohua Ren, Min Zhou, Yandong Mu, Kun Tian
• Citations: 1 (Details)

• Determination of the Anti-Adhesive and Anti-Biofilm Capacity of a Wheat Extract on Staphylococcus aureus in Farms, Journal of Materials Science and Chemical Engineering, Vol.9 No.9, 2021
• Maria Angeles Calvo Torras, Esteban Leonardo Arosemena Angulo, Susana Martin Orúe, Xavier Torras Bombardó
• Citations: 1 (Details)

• Pyrene Nanocrystals Crystallized by a Continuous Flow Microreactor, Journal of Materials Science and Chemical Engineering, Vol.9 No.11, 2021
• Norihito Doki, Masaaki Yokota
• Citations: 1 (Details)

• Effect of High-Energy Vibrating Ball Milling in the Reduction of the Crystallite Size of TiO₂ Particles, Journal of Materials Science and Chemical Engineering, Vol.9 No.11, 2021
• Ganbat Batdemberel, Dugerjav Otgonbayar, Gonchigsuren Munkhsaikhan
• Citations: 1 (Details)

• Reactive Alloys of IIA Metals: Gas Sorption and Corrosion as One Process, Journal of Materials Science and Chemical Engineering, Vol.9 No.11, 2021
• Konstantin Chuntonov, Alexey O. Ivanov, Viktor L. Kozhevnikov
• Citations: 1 (Details)

• Physical and Thermo-Oxidative Characterization of Asphalt Modified with High Density Polyethylene and Recycled Engine Oil, Journal of Materials Science and Chemical Engineering, Vol.10 No.5, 2022
• Hélder Manguene, Antonino Squillace, Henriques Filimone, Herminio Muiambo
• Citations: 1 (Details)

• Effect of Ultrasound on the Pseudoelasticity of Shape Memory Alloys, Journal of Materials Science and Chemical Engineering, Vol.10 No.6, 2022
• Ali H. Alhilfi, Andrew Rusinko
• Citations: 1 (Details)

• Electrical Conductivity and Crystallization of Polylactic Acid Nanocomposites Containing Surfactant Modified Carbon Nanotubes, Journal of Materials Science and Chemical Engineering, Vol.10 No.4, 2022
• Qi Zhang, Shijun Zhang
• Citations: 1 (Details)

• Effects of Light Radiation Absoption on the Resistance of Sweet Potato Starch-Based Bioplastics, Journal of Materials Science and Chemical Engineering, Vol.10 No.2, 2022
• Aristide Herlyn Wilfrid Nakavoua, Emmanuelle Surya Ouenadio, Pascale Ursula Nkoua-Ouassamo, Vincent Verney
• Citations: 1 (Details)

• A Pilot Study on the Concentration of Heavy Metals in Sediments from the Lower Orange River, //Karas Region, Namibia, Journal of Materials Science and Chemical Engineering, Vol.10 No.3, 2022
• Regean Pitiya, Lubang Jacob, Rakotonirina Judye Emilinot
• Citations: 1 (Details)

• Experimental and Computational Study of the Microwave Absorption Properties of Recycled α-Fe2O3/OPEFB Fiber/PCL Multi-Layered Composites, Journal of Materials Science and Chemical Engineering, Vol.10 No.3, 2022
• Ebenezer Ekow Mensah, Raba’ah Syahidah Azis, Zulkifly Abbas
• Citations: 1 (Details)

• 3D Bio-Printed Bone Scaffolds Incorporated with Natural Antibacterial Compounds, Journal of Materials Science and Chemical Engineering, Vol.10 No.3, 2022
• Zhuo Zhang, Yiqi Yang, Hongbo Zhang, Shengbing Yang, Ruixue Yin, Wenjun Zhang
• Citations: 1 (Details)

• Efficiency and Effectiveness Method versus ε-NTU Method with Application in Finned Flat Tube Compact Heat Exchanger with Water-Ethylene Glycol as Nanofluid Base of Iron Oxide Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.10 No.2, 2022
• Élcio Nogueira
• Citations: 1 (Details)

• Production and Characterization of Green Biosorbent Based on Modified Corn Cob Decorated Magnetite Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.11 No.2, 2023
• N’guadi Blaise Allou, N’goran Sévérin Eroi, Mougo André Tigori, Patrick Atheba, Albert Trokourey
• Citations: 1 (Details)

• The Environment Deterioration Impact on the Granite Rock Art Relief of Seti I in Aswan, Egypt, Journal of Materials Science and Chemical Engineering, Vol.10 No.10, 2022
• Ezz A. Orabi
• Citations: 1 (Details)

• Optimization of Preparation Conditions of Activated Carbons Based on the Shells of Ricinodendron heudoltii, Journal of Materials Science and Chemical Engineering, Vol.10 No.10, 2022
• Kouakou Yao Urbain, Karidioula Daouda, Zran Vanh Eric-Simon, Trokourey Albert, Yao Kouassi Benjamin, Drogui Patrick
• Citations: 1 (Details)

• NBO Analysis by ONIOM and DFT (B3LYP) Calculations of Intramolecular and Intermolecular Interactions of Artemisinin, Quinine and Thirteen Manzamenones with H₂O or Alanine, Journal of Materials Science and Chemical Engineering, Vol.10 No.10, 2022
• Atse Adepo Jacques, Kone Soleymane, Diomande Sékou, Et Bamba El-Hadji Sawaliho
• Citations: 1 (Details)

• Study of Magnetite Crystal Structure Extracted from Local Sands of Tegal Lenga Beach, Journal of Materials Science and Chemical Engineering, Vol.10 No.9, 2022
• P. Suardana, M. Sumadiyasa, I Gede Hendrawan
• Citations: 1 (Details)

• Electrostatic Complexes of Nano-Montmorillonite/Ethyl Lauroyl Arginate Stabilized Sunflower Oil Pickering Emulsions, Journal of Materials Science and Chemical Engineering, Vol.10 No.7, 2022
• Qi Luo, Changshui Jing, Chuanyuan Yang, Dehai Yu
• Citations: 1 (Details)

• Effect of Substitution Sr Cations on the Structure in the Gd₁(Ba_2−xSr_x)Cu₃O_7−δ Phases, Journal of Materials Science and Chemical Engineering, Vol.8 No.1, 2020
• Made Sumadiyasa, Nyoman Wendri, Putu Suardana, Ni Nyoman Rupiasih
• Citations: 1 (Details)

• Preparation of Silicon Nanoparticles by Pyrolysis of Organosilicon Compounds inside the Porous Carbon, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Michiya Ota, Kazunari Arai, Ayano Kuribara, Yonekazu Deguchi, Kota Onozuka
• Citations: 1 (Details)

• Effect of Scattering on the Transmission of Si Nanorod Arrays, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Xiaojian Yu, Chaogang Lou
• Citations: 1 (Details)

• Preparation of Micron Co₃O₄ by Liquid-Phase Precipitation, Journal of Materials Science and Chemical Engineering, Vol.7 No.12, 2019
• Yi Peng
• Citations: 1 (Details)

• Effect of Minor Cr Additions on Dispersed Phase and Properties of Al-Zn-Mg-Cu-Zr Alloys, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Xingzhi Liao, Yanxi Li, Pengxuan Dong, Kanghua Chen
• Citations: 1 (Details)

• Tribochemical Purification of Gases. I. The Process Model, Journal of Materials Science and Chemical Engineering, Vol.8 No.2, 2020
• Konstantin Chuntonov, Alexey O. Ivanov, Viktor L. Kozhevnikov
• Citations: 1 (Details)

• Joining of SiC Ceramics by the Flash-Bonding Technique, Journal of Materials Science and Chemical Engineering, Vol.8 No.3, 2020
• Takuro Yoshitake, Yoshio Ohta, Mikito Kitayama
• Citations: 1 (Details)

• Investigation of Mechanical Properties for Reinforced Polyester Composites with Palm Fronds, Journal of Materials Science and Chemical Engineering, Vol.8 No.3, 2020
• Ahmad E. Eladawi, A. H. Rajpar
• Citations: 1 (Details)

• Synthesis and Characterization of the Thermoelectric Nickel Tetrathiooxalate Polymer as Nanoparticles, Journal of Materials Science and Chemical Engineering, Vol.8 No.4, 2020
• Christophe Faulmann, Benoît Cormary, Dominique de Caro, Kane Jacob, Lydie Valade, Pascale de Caro
• Citations: 1 (Details)

• pH Controlled Synthesis of Tetragonal Cu₂O Particles, Journal of Materials Science and Chemical Engineering, Vol.8 No.8, 2020
• Qinglin Su, Lin Zhang, Yi Liang, Yan Liu, Peng Liu, Jiandong Zhang
• Citations: 1 (Details)

• AlCl₃ Cross-Linked and Spray Dried Carboxymethyl Sago Cellulose Microspheres as Potential Carriers for the Enteric Delivery, Journal of Materials Science and Chemical Engineering, Vol.8 No.10, 2020
• Saravanan Muniyandy, Pushpamalar Janarthanan, Thenapakiam Sathasivam
• Citations: 1 (Details)

• Establishment of PEEK-Associated Drug Delivery Systems—Limits and Perspectives, Journal of Materials Science and Chemical Engineering, Vol.8 No.10, 2020
• Marius Behnecke, Svea Petersen
• Citations: 1 (Details)

• Electrochemical Behavior of Alumix 321 PM and AA6061 Alloys in 3.5 wt% NaCl Solution by Electrochemical Impedance Spectroscopy Measurements, Journal of Materials Science and Chemical Engineering, Vol.8 No.10, 2020
• Natacha Rostomov, William Judge, George Jarjoura
• Citations: 1 (Details)

• Numerical Study on Microbial Depolymerization Process of Xenobiotic Polymer, Journal of Materials Science and Chemical Engineering, Vol.9 No.1, 2021
• Masaji Watanabe, Fusako Kawai
• Citations: 1 (Details)

• Fabrication and Characterization of Poly(Styrene-Butadiene-Styrene)/Thermoplastic Polyurethane Blends, Journal of Materials Science and Chemical Engineering, Vol.9 No.2, 2021
• Yuhsin Tsai, Mu-Chen Kuo, Jyh-Horng Wu
• Citations: 1 (Details)

• Effect of Styrene on the Properties of Transparent Flame Retardant Unsaturated Phosphate Copolymer, Journal of Materials Science and Chemical Engineering, Vol.9 No.2, 2021
• Nan Lin, Wei Li, Hongli Liu, Lele Zhou, Xiuyun Li
• Citations: 1 (Details)

• Unique Double Carbon Protection Structured Co₃O₄ Anode for Lithium Ion Battery, Journal of Materials Science and Chemical Engineering, Vol.8 No.12, 2020
• Dawei Luo, Yuban Lei, Ning Zhao, Hang He, Khan Abrar, Kun Li
• Citations: 1 (Details)

• Synthesis of Biodegradable Plastics from Dyeing Wastewater and Optimization of Continuous Poly(3-Hydroxybutyrate) Fibrous Membranes via Electrospinning Process, Journal of Materials Science and Chemical Engineering, Vol.8 No.12, 2020
• Yaohui Liu, Yanming Wang, Cheng-Hao Lee, Chi-Wai Kan, Hong Chua
• Citations: 1 (Details)

• Effect of Perlite on Fire Protection of Waterborne Coatings for Steel Structure, Journal of Materials Science and Chemical Engineering, Vol.8 No.12, 2020
• Hao Huang, Xinguo Ge, Zejiang Zhang, Pingli Li, Tianhao Zhang
• Citations: 1 (Details)

• Extraction-Atomic-Absorption Determination of Gallium (III) with 2-hydroxy-5-T-butylphenol-4’-methoxy-azobenzene, Journal of Materials Science and Chemical Engineering, Vol.8 No.9, 2020
• Aydin M. Pashajanov, Shahin M. Bayramov, Gulu G. Abbasova, Melek M. Agamaliyeva, Zumrud A. Mamedova
• Citations: 1 (Details)

• Dry Sliding Wear Behavior of Ti6Al4V and TaN against TiN Deposited Steel Surface, Journal of Materials Science and Chemical Engineering, Vol.3 No.7, 2015
• A. Elaya Perumal, I. Saravanan
• Citations: 1 (Details)

• Absorption Enhanced Methanol Synthesis in a Trickle Bed Reactor over Cu/Zn/Al₂O₃ Catalyst, Journal of Materials Science and Chemical Engineering, Vol.3 No.6, 2015
• Peng Liu, Zhenmin Cheng
• Citations: 1 (Details)

• Application of Polymers in Low Permeability Formations, Journal of Materials Science and Chemical Engineering, Vol.3 No.5, 2015
• Juan Zhao, Caili Dai, Guang Yang, Jian Zhang, Hui Yang, Xinsheng Xue, Xiaodong Kang, Lixia Li
• Citations: 1 (Details)

• On the Advantages of the Theories of Plasticity with Singular Loading Surface, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Andrew Rusinko, Daniel Fenyvesi
• Citations: 1 (Details)

• Structural Analysis of ZnO Film Deposited by Means of Metal Organic Decomposition Method, Journal of Materials Science and Chemical Engineering, Vol.2 No.11, 2014
• Masato Ohmukai, Takuya Nakagawa, Masaru Kamano, Nobutomo Uehara
• Citations: 1 (Details)

• Evaluation of Cathodic Arc Deposited Thick CrAlSiN Coatings by Erosion Test, Journal of Materials Science and Chemical Engineering, Vol.3 No.1, 2015
• Wei-Yu Ho, Yen-Sho Chang, Bo-Yi Chou, Chien-Liang Lin
• Citations: 1 (Details)

• Alternative System of Industrial Paint Applied to Spherical Mount for Liquefied Petroleum Gas, Journal of Materials Science and Chemical Engineering, Vol.2 No.5, 2014
• Fernando B. Mainier, Francisco Otavio Pereira da Silva, Gilberto Oliveira da Silva
• Citations: 1 (Details)

• The Electrode for Potentiometric Determinаtion of Chromium (III, VI) in Wаter Solutions, Journal of Materials Science and Chemical Engineering, Vol.2 No.1, 2014
• Shаmshiyа Аmerkhаnovа, Dana Belgibayeva, Rustаm Shlyаpov, Аitolkyn Uаli
• Citations: 1 (Details)

• Pt-Al₂OM₃ Composite Material Designed for Cyclic Production of Optical Glasses under High Temperature Conditions, Journal of Materials Science and Chemical Engineering, Vol.2 No.3, 2014
• Aleksandr Bochegov, Aleksandr Ermakov, Irina Vandysheva
• Citations: 1 (Details)

• A High-Strength Cement System for Improved Dental Restoratives, Journal of Materials Science and Chemical Engineering, Vol.2 No.3, 2014
• Dong Xie, Jun Zhao, Yiming Weng
• Citations: 1 (Details)

• Effect of an Organic Inhibitor on the Electrical Properties of High Carbon Steel in Simulated Acid Environment, Journal of Materials Science and Chemical Engineering, Vol.2 No.7, 2014
• Osarolube Eziaku
• Citations: 1 (Details)

• Redox Reactions Values of AlZn + Ag Eutectoid Chemical Composition, Journal of Materials Science and Chemical Engineering, Vol.2 No.8, 2014
• Socorro Valdez, Jorge A. Ascencio, Angélica Meneses, Sid R. Casolco
• Citations: 1 (Details)

• Studies on Synthesis and Characterization of Magnesia Based Refractory Aggregates Developed from Indian Magnesite, Journal of Materials Science and Chemical Engineering, Vol.2 No.10, 2014
• Manas Kamal Haldar, Chandrima Ghosh, Arup Ghosh
• Citations: 1 (Details)

• The Polymeric Heterogemeous Matrix for Carbon and Glass Reinforced Plastic, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• Galina Malysheva, Lianhe Liu, Xiao Ouyang, Oleg Kulakov
• Citations: 1 (Details)

• Influence of the Precipitating Reagents and Dispersants on the Formation Nano-Aluminum Hydroxide, Journal of Materials Science and Chemical Engineering, Vol.1 No.5, 2013
• G. Sarsenbay, L. A. Myltykbaeva, R. A. Abdulwalyev, B. M. Sukurov
• Citations: 1 (Details)

• Damping Factor Estimation of a Flexible-Matrix-Composite Body Pump, Journal of Materials Science and Chemical Engineering, Vol.4 No.7, 2016
• N. P. Kumar, H. Ghoneim
• Citations: 1 (Details)

• Photophysical Properties of Perylenetetracarboxylic Diimide Dimers with Slipped “Face-to-Face” Stacked Structure and Different Bay Substitutions, Journal of Materials Science and Chemical Engineering, Vol.4 No.6, 2016
• Heyuan Liu, Xiyou Li
• Citations: 1 (Details)

• Effect of the Mineralogical Composition of Limestone on the Properties of Mortars, Journal of Materials Science and Chemical Engineering, Vol.4 No.5, 2016
• Carla Macie, Arão Manhique, Rodrigues Manjate, Carvalho Madivate
• Citations: 1 (Details)

• I^– Ions as Obstacles to Dislocation Motion in NaCl:I^– Single Crystals, Journal of Materials Science and Chemical Engineering, Vol.4 No.4, 2016
• Yohichi Kohzuki, Tomiyasu Ohgaku
• Citations: 1 (Details)

• The Effect on the Electric Structure and Optical Properties of Ca₂Ge Bulk with Sr-Doping, Journal of Materials Science and Chemical Engineering, Vol.4 No.11, 2016
• Yingjian Wei, Yinye Yang, Weifu Cen, Ruijie Li, Lin Lv
• Citations: 1 (Details)

• Evaluation of the Characteristic of Adsorption in a Double-Effect Adsorption Chiller with FAM-Z01, Journal of Materials Science and Chemical Engineering, Vol.4 No.10, 2016
• Takehiro Esaki, Noriyuki Kobayashi, Takayuki Matsuda
• Citations: 1 (Details)

• Response Surface Methodology as an Approach for Optimization of the Synthesis of 1-(2-Aminoethyl)-2-imidazolidone, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Yaoyi He, Jianguo Cai, Yu Zhang
• Citations: 1 (Details)

• TEM Observation of Si0.99C0.01 Thin Films with Arsenic-Ion-, Boron-Ion-, and Silicon-Ion-Implantation Followed by Rapid Thermal Annealing, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Junji Yamanaka, Shigenori Inoue, Keisuke Arimoto, Kiyokazu Nakagawa, Kentarou Sawano, Yasuhiro Shiraki, Atsushi Moriya, Yasuhiro Inokuchi, Yasuo Kunii
• Citations: 1 (Details)

• Photoluminescence and X-Ray Diffraction Properties of Europium and Silver Co-Doped Tantalum-Oxide Thin Films Deposited by Co-Sputtering, Journal of Materials Science and Chemical Engineering, Vol.5 No.2, 2017
• Keisuke Shimada, Kenta Miura, Ryosuke Fujii, Masahiro Kanakubo, Wataru Kada, Osamu Hanaizumi
• Citations: 1 (Details)

• Templated J-Aggregate Nanotubes for the Detection of Dopamine, Journal of Materials Science and Chemical Engineering, Vol.5 No.1, 2017
• Samuel Rhodes, Xiaochen Wang, Wenlang Liang, Hyoung Jin Cho, Jiyu Fang
• Citations: 1 (Details)

• XRD Evaluation of Relative Mechanical Strength and Irradiation Resistance of Synthetic Diamond, Journal of Materials Science and Chemical Engineering, Vol.3 No.12, 2015
• E. M. Shishonok, V. G. Luhin
• Citations: 1 (Details)

• Frequency Dependence of Atomic Diffusivity and Electrical Properties of Gum Arabic/Graphite Composite, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• Bilquis Ibrahim Adham, Hatim Mohamed El-Khair, Mohamed Ahmed Siddig
• Citations: 1 (Details)

• First-Principles Calculations on the Half-Metallicity of Rock-Salt Ferromagnetic FeO, Journal of Materials Science and Chemical Engineering, Vol.3 No.9, 2015
• Jun Liu, Xiaolan Yang, Wei Kang
• Citations: 1 (Details)

• Comprehensive Study on Machinability of Titanium Composite, Journal of Materials Science and Chemical Engineering, Vol.4 No.2, 2016
• Basim A. Khidhir
• Citations: 1 (Details)

• Folding and Unfolding Simulations of a Three-Stranded Beta-Sheet Protein, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Seung-Yeon Kim
• Citations: 1 (Details)

• Enhancement of Toxic Gas Detecting Ability of Film Type Colorimetric Sensor, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• Sung Yeol Kim, Seung Kyun Yoon, Jungho Ahn, Dong June Chung
• Citations: 1 (Details)

• Thermoelectric Simple and Multilayers Prepared by Laser, Journal of Materials Science and Chemical Engineering, Vol.4 No.1, 2016
• M. Jelinek, R. Zeipl, J. Vanis, T. Kocourek, J. Remsa, J. Navratil, J. Lorinčík
• Citations: 1 (Details)