Microstructure of Carbon Fiber and Carbon Reinforced Plastic ()
N. I. Baurova,
Wei Hao,
Ouyang Xiao
Department of Manufacture and Repair of Motor Vehicles and Road Cars, Moscow Automobile
Road State Technical University (MADI), Moscow, Russia.
Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China.
DOI: 10.4236/msce.2013.15006
PDF
HTML
6,233
Downloads
10,543
Views
Citations
Abstract
This study is the investigation of the
microstructure of different types of carbon fiber. They were compared with the carbonized and
graphitized fibers. Results of structural researches have been presented. It
was found that the damage varies from different pollution and the damage of the monofibers.
The effect of the pollution of the monofiber was determined.
Share and Cite:
Baurova, N. , Hao, W. and Xiao, O. (2013) Microstructure of Carbon Fiber and Carbon Reinforced Plastic.
Journal of Materials Science and Chemical Engineering,
1, 28-32. doi:
10.4236/msce.2013.15006.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
V. I. Kostikov, “Constructional Materials on the Basis of Carbon in Modern Equipment—Chelyabinsk: Collection of Scientific Works,” Modern Problems of Production and Operation of Carbon Production, 2005, pp. 8-11.
|
|
[2]
|
V. A. Zorin and N. I. Baurova, “Influence of External Factors on the Accuracy of Diagnosing of Road-Building Cars with Use of Carbon Fibers,” Construction and Road Cars, No. 1, 2009, pp. 50-51.
|
|
[3]
|
N. I. Baurova, “Diagnostirovaniye and Repair of Cars about Application Polymeric Materials,” Tekhpoligraft-sentr, 2008, 280 p.
|