P.S. Rao, D.N. Sathyanarayana and S. Palaniappan, “Po-lymerization of Aniline in an Organic Peroxide System by the Inverted Emulsion Process,” Macromolecules, Vol. 35, No. 13, 2002, pp. 4988-4996. doi:10.1021/ma0114638

has been cited by the following article:

• TITLE: Supported TritonX-100 Polyaniline Nano-Porous Electrically Active Film onto Indium-Tin-Oxide Probe for Sensors Application

  AUTHORS: Raju Khan

  KEYWORDS: Electrochemical Polymerization, Non ionic surfactant, Conducting Polyaniline, Atomic Force Microscopy, Scanning Tunneling Microscopy.

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.1 No.3, July 22, 2011

  ABSTRACT: Supported tritonX100 polyaniline nano-porous electrically active film has been fabricated successfully onto indium-tin-oxide conducting probe using electrochemical polymerization process. The doping of TX-100 in the polymeric network of PANI was suggested using cyclic voltammeter, UV-vis spectroscopy, and Fourier Transform Infrared spectroscopy. The change in the surface morphology of PANI thin film due to incorporation of tritonX-100 was investigated using Atomic Forced Microscopy and porosity has been confirmed scanning electron microscopy, respectively. The surface morphology, uniformly disperse hexagonal close packing of TX-100 in PANI matrices due to the incorporation of TX-100 in polymeric network of PANI was confirmed by Atomic Force Microscopy. The electrical conductivity of PANI-TX-100 increases from 1.06 x 10-2 S/cm-1 to 4.95 x 10-2 S/cm-1 as the amount of TX-100 increases during the polymerization. The change in the morphology and electrical conductivity of PANI due to incorporation of TX-100 prove as a promising material for the sensing application.