Measuring Student Knowledge, Ignorance and Risk Aversion with Objective Examination Questions


This paper applies deductive logic to the structure and outcomes of objective questions. When all terms are clearly defined and deductive logic is correctly used, then the results must be true, even if they are surprising or counter-intuitive. The defined premises are 1) student’s true knowledge, 2) student’s false knowledge, 3) student’s admitted ignorance and 4) student’s level of risk aversion. Definitions for 5) correct answer, 6) wrong answer, and 7) abstain are also needed. Some logical processes are numerical and involve simple equations. The main outcomes include: i) the standard scoring of correct answers, the number of wrong answers and the number of abstain can result from varying levels of true knowledge, false knowledge and admitted ignorance; ii) the level of risk aversion is measured by the proportion of answers where the student abstains from answering. High risk aversion lowers standard score, but this effect can be easily corrected.

Share and Cite:

Dugdale, A. (2016) Measuring Student Knowledge, Ignorance and Risk Aversion with Objective Examination Questions. Creative Education, 7, 2352-2361. doi: 10.4236/ce.2016.715227.

1. Introduction

Objective questions have been used for more than seventy years, and scores form a large part of student assessment. These scores correlate well with scores from other assessments, so presumably give a valid measure of student ability. They have the advantage of administrative simplicity, with banks of verified questions for use/re-use, and they can test a wide range of knowledge in a single exam. The marking can be automated. Most pass/fail decisions are based on the number of correct answers, but we usually ignore the wrong answers and the reasons for them. We assume that correct answers arise from student knowledge or through random guessing and there are various mathematical methods to correct the scores to avoid giving rewards to guessing (Tavakol & Dennick, 2011) . Error is seldom penalized. Mathematical analyses based on these principles (Tavakol & Dennick, 2011) help select effective questions and give statistical validity to the scoring. However, most of these analyses have defects.

1) Most analyses implicitly assume that we are testing knowledge, that is, the first cognitive level in taxonomy of both Bloom (Bloom, 1972) and Anderson & Krathwohl (2000) . At this level, having no penalty for error is logically correct. Credit should be given for knowledge.

2) However, in assessment for future professional careers, we should be testing the application of that knowledge, which is a higher cognitive taxonomy. This can be done by changing the stem of objective questions from a simple statement to a clinical scenario, so the student needs both relevant correct knowledge and the ability to apply it. Under these conditions, admitted ignorance (DK don’t know) is not dangerous, but misinformation (FK false knowledge) or the wrong use of true knowledge (TK) can lead to clinical error and patient harm. It is part of student training, and therefore part of assessment, that error, and the risk of error, should be recognized and minimized. This has been done by penalizing error, but the benefits of this strategy are uncertain (Burton, 2004) .

3) Standard objective questions give the student three alternative responses. These are: i) the statement is TRUE, ii) the statement is FALSE, iii) I DO NOT KNOW whether it is true or false. These responses assume the student has complete knowledge or complete ignorance. But this does not explain wrong answers, so we recognize partial knowledge, false knowledge and guessing. Most mathematical models used to analyze outputs from objective questions assume that wrong answers come from random guessing. Analysis of published scores based on random guessing alone e.g. (Van der Vleutin et al., 2004) gives very low scores for correct knowledge. There must be other factors.

4) Partial knowledge or uncertainty exists (Ebel, 2003; Burton, 2002 ). If our certainty of the truth of facts/data/knowledge is near 100%, then we are prepared to use it to make serious decisions. Other items of knowledge are less certain, some are merely hunches with low level of certainty. We might use that knowledge in casual conversation, but not if major issues were at stake. The willingness of individuals to use uncertain facts varies and is known as risk aversion. This is well studied, particularly in financial planning.

5) Most of the current models assume that all student knowledge is true by current scientific standards. There is evidence to indicate that misinformation (FK false knowledge) is a significant factor causing wrong answers in assessments. Psychologists accept that misinformation is common. In the data presented by Ebel (1968) , 25% of unguessed results were wrong (calculated by Burton, 2002 ). When a person is presented with new “facts”, he/she usually retains this as true knowledge (Burton, 2002) . Repeated exposure to those facts may alter memories (Loftus & Hoffman, 1989) . It needs effort to make a person change his/her belief about a fact from truth to falsity (Roediger III & Marsh, 2005) . Functional MRI scanning has shown that different areas in the brain are involved in accepting truth and changing from truth to falsity (Fellows & Farah, 2003) . Using objective questions as teaching tools, Roediger (2005) has shown that exposure to material reinforces true knowledge, but with repeated viewing some of the distractors may later be considered to be true.

Current models used to explain the results of objective assessments have produced valuable data, but there remains confusion in dealing with uncertain knowledge and misinformation. I therefore revisit the basic structure of objective questions to show that all formats used are modifications of one basic structure. I shall then show how we can quantify uncertain knowledge and risk taking strategies but not the level of misinformation or the actual level of true knowledge, false knowledge.

No analysis of the logical framework of objective questions has been found in the literature. In this paper I shall define the relevant initial assumptions, and formal deductive logic to reach conclusions. Deductive reasoning links premises with conclusions through logic. If all premises are true, the terms are clear, and the rules of deductive logic are followed, then the conclusions reached are necessarily true.

2. The Basic Structure of Objective Questions

All objective questions have the same basic structure. There is a STATEMENT followed by two or more POSSIBLE RESPONSES. The candidate must choose the most appropriate response. There is usually a CONDITION which may be implicit. Most conditions limit the student’s responses and reduce the information gained (Dugdale, 2013; Dugdale, 2015) . The examples below illustrate some alternative formats of the basic objective question.


*A An apple is a fruit [ ] True

Condition: If no response marked this indicates False or Don’t Know

*B An apple is a fruit [ ] True [ ] False [ ] Don’t Know

Condition: One response must be marked

Each of these is a complete and valid objective question. The Condition is usually implied but is stated here for completeness. The student must give one response to each statement. All complex types of objective questions are variations and combinations of basic objective questions.

In *A format, there are two possible answers to each question True or (False + Don’t Know). Most Type A MCQs are in this format, but unite several related lines into a single question with a single response. I shall therefore consider Type A questions later. Format *B questions may be set as a stand-alone one line question or combined in an MTFQ, each line with three options, Correct/Wrong/Abstain (C/W/A) These terms are defined formally below. In a multi-line MTFQ each line is logically and independent question. When a student sits an objective C/W/A examination with 100 expected responses the results will appear (for example) as

Correct 56

Wrong 24

Don’t Know 20

We know that the Correct score contains true knowledge and some results from guessing; the Wrong score may arise from guessing or other causes. However, the aim of the assessment is to find the student’s underlying levels of knowledge and ignorance. To extract the student’s levels of knowledge and ignorance from the C/W/A score we must define the terms used and then employ some simple logic. The definitions below are necessary for understanding.

3. Premises and Definitions

True Knowledge [TK]: facts/opinions/deductions that the student holds to be true and experts (and examiners) also consider true. The statement “most humans have one head is TRUE” is an item of true knowledge. The statement “most humans have three legs is FALSE” is also true knowledge.

False Knowledge (misinformation) [FK]: facts/opinions/deductions that student holds to be true but experts (and examiners) consider false. This is the opposite of true knowledge.

Ignorance [DK]: items that subject admits he/she does not know.

Risk aversion score [RA]: a measure of doubt about the truth or error of less-than- certain knowledge. If the certainty of knowledge is put on a scale from 99% (almost complete certainty) down to 1% (minimal certainty), then a person with a risk aversion of say 40%, will not use those facts which of which he/she is less than 40% certain. This is a subjective assessment, and is very difficult to measure objectively. I have there used a surrogate definition. This is.

Risk aversion score [RA] = the % of items of true knowledge and false knowledge that a person will class as ignorance under prevailing conditions. When he/she uses the item of knowledge he/she will mark the question as true if he/she thinks it is likely to be true, or false if he/she thinks it likely to be false.

A person with a risk aversion [RA] score of 40% will consider 40% of his items of knowledge to be too uncertain to use under examination conditions and will therefore Abstain. A student with a RA of 100% will abstain from all items, with RA of 0% he/she will “have a go” at all items. The formal definition is.

Risk aversion is the proportion of those items which the student considers to be TRUE or FALSE which the student will classify as ABSTAIN under examination conditions.

Risk aversion also applies to admit ignorance [DK]. A student who does not know the answer may guess an answer. I have found no numerical level of this in the literature; intuitively it is less likely than when the student has uncertain knowledge. I have therefore made the risk aversion for ignorance [DK] the same as the risk aversion for knowledge. This assumption is tested later.

Other practical definitions of items in the score sheet of an objective assessment are.

Correct answer [C]: if the student and examiner agree that the statement is true, or if they agree that the statement is false then the answer is correct.

Wrong answer [W]: where the student and examiner disagree on the truth/falsity of the statement.

Abstain [A]: where the student did not give an answer: the student did not know the answer or was too uncertain to risk giving one.

4. Logic

When these definitions are considered logically, several results follow.

1) In an objective question C/W/A test, a student will abstain if his level of uncertainty is below his/her critical level. Using the definition above, the student will abstain for RA% of his/her knowledge. He/she will therefore abstain for RA% of true knowledge items, RA% of false knowledge items, and RA% of the Don’t Know items. This is shown in Equation (1)


2) The correct score C has two components i) the total number of items of true knowledge minus those in the Abstain score. This is TK*(1 − RA) and ii) half the Don’t Know items excluded from the Abstain score (assuming that the student will make random guesses, half correct and half wrong). This is DK*(1 − RA)/2. The total correct score is shown in Equation (2)


3) Similarly, the wrong score W will be


5. Deductions from Basic Equations

Deductive reasoning links premises with conclusions. The following conclusions follow from the three logical equations

1) Conclusion #1: The level of risk aversion can be calculated from the score of a C/W/A objective test

It follows from Equation (1)


In words, the risk aversion is given by the proportion of the total answers where the student abstains. Risk Aversion is therefore independent of levels of true and false knowledge. Under these conditions the level of risk aversion is always.

Risk Aversion [RA] = Number of Abstain responses/Total responses.

This holds for all values of Correct, Wrong and Abstain. The level of risk aversion will be shown to affect the scores of students who have the same levels of actual knowledge.

2) Conclusion #2: For any level of student knowledge (True, False, Don’t Know) and risk aversion there is a unique C/W/A score in an objective test.

This C/W/A score in Table 1 must follow from the figures in Table 2. This calculation uses no negative marking for error.

3) Conclusion #3: For any C/W/A score there is no unique set of levels for student knowledge (True, False, Don’t Know).

However, if we are given the C/W/A score we cannot get back to a unique TK/FK/DK score. We get the correct value of the risk aversion but we get many TK/FK/DK scores which all give the same test score.

For a C/W/A score of Correct = 56 Wrong = 24 Abstain = 20 (Table 1) all the sets of values below (and other intermediate values) are possible.

The results in Table 3 show that a C/W/A score does not give an accurate indication of a student’s knowledge, but can result from many differing levels of true knowledge, false knowledge and ignorance. The students *A to *D all have the same score on a C/W/A objective test, but their patterns of knowledge are very different. Remedial teaching (if indicated by the overall mark) should be different for students with differing levels of true and false knowledge.

Table 1. Using Equations (1)-(3) his/her score on a C/W/A objective assessment would be.

Table 2. As an example, take a student whose actual knowledge levels in 100 test items were.

Table 3. Some possible levels of TK, FK and DK for C/W/A score in Table 1.

4) Conclusion #4: Useful derived values to measure practical aspects of a student’s knowledge.

Two other scores that could be useful in assessing student knowledge have been reported (Dugdale et al., 1979) .

Perceived knowledge = the amount (in %) of the knowledge tested that the student thinks he/she has (both true and false). Accuracy of knowledge = the proportion of perceived knowledge that is true.

Students with the same score in a C/W/A objective test could believe that they have knowledge (true or false) of 42% to 98% of the items tested and the percentage of that “knowledge” that is correct could vary from 98% to 70%. These data are obviously important in assessing the student’s fitness for professional practice and also in designing teaching to remedy deficiencies

5) Conclusion #5 Increasing the level of risk aversion lowers overall scores but may not alter the liability for error.

Faculties may employ negative scoring in objective assessments to reduce guessing and other risk taking behaviors. Increasing risk aversion changes the scores as shown below. From #I we have

Risk Aversion score = (Number of Don’t Know Answers)/(Total number of Answers).

Risk Aversion (RA) will therefore vary from 0.0 to 1.0. A student who will always “have a go” will answer all questions no matter how uncertain will have a RA score of zero. The various combinations of Correct and Wrong responses do not affect the RA score.

For a student with TK = 60, FK = 20 DK = 20 (see Table 2) and with varying levels of RA the C/W/A scores are.

Table 4 shows that as the level of risk aversion increases, the correct and wrong scores decrease. If the given mark is the number of correct answers then the score for the examination will decrease with increasing risk aversion. The Correct and Wrong scores maintain the same ratio one to the other. Given the range of possible TK, FK and DK values for each of these C/W/A scores, we cannot make any assumption about the levels or accuracy of the TK, FK and DK.

Other calculations can be done using the basic relationships between TK, FK and DK which indicates the student’s knowledge levels and the resulting C/W/A scores.

6) Conclusion #6 A correction factor can be calculated and applied to make the C/W/A score risk aversion neutral.

Table 4. C/W/A scores with varying levels of risk aversion and no negative marking for error.

We should not encourage professionals to take excessive risks in their day-to-day practice, but present scoring schemes penalize risk aversion even if there is no negative mark for wrong answers and therefore encourage risk taking (see Table 5). A simple correction factor can make the scores in a C/W/A paper risk neutral, by scaling the scores to a risk aversion level of 0%. To each of scores in Table 6 we apply the correction factor (CF)

This should be done on the scores in the Table 6. Any negative marking for error should be done on the revised scores.

7) Varying risk aversion for ignorance.

It seems likely that students will be more averse to random guessing answers from ignorance than from partial knowledge. In the argument above, the two levels of risk aversion were made equal. If we double the risk aversion for ignorance but leave other factors the same, Table 6 shows that the change in outcomes is small and does not affect the underlying arguments.

6. The Logic of Type 1 MCQs

Type 1 MCQs appear to have different properties to the MTFQ format. However, this is in the format rather than in the intrinsic logic of the question. In a Type A MCQ each question demands a single answer. The Type A MCQ

An apple is

Fruit [ ]

Mineral [ ]

Animal [ ]

can be written in the format.

Table 5. In the example above (Table 3) the values of perceived knowledge and accuracy of knowledge are.

Table 6. Shows an example of change in outcomes with increased risk aversion for ignorance. Using the levels of TK, FK and DK in Table 2.

An apple is

Fruit [ ]

Mineral [ ]

Animal [ ]

Condition Mark one box or leave blank to abstain.

This demands one answer which may be Correct or Wrong. If no answer is given we assume Don’t Know. A Type A MCQ is therefore equivalent to a single line in an MTFQ and has the same logical properties.

7. Discussion

Objective questions have been a major form of student assessment for many years. Scores from both the standard Type A MCQ and the MTFQ correlate well with other forms of assessment. Both forms give a real and valid measure of the ability of students, but there is no consensus about the best way to recognize and manage uncertain knowledge and misinformation. If this could be done, it would strengthen the validity of objective questions as tests of student abilities, and also identify sources or error and so improve the process of teaching and learning.

Central to these aims are the definitions of states of knowledge. I have used standard and practical definitions for “true knowledge”, “false knowledge” aka “misinformation” and for “ignorance” aka “don’t know”. My definition of “risk aversion” is designed to meet the needs of the objective question format. I have replaced the largely immeasurable concept of “psychological uncertainty” with an action-based measure of the percentage of items of “knowledge”, then the student will avoid using under given levels of reward/penalty. The numerical value of this level of “risk aversion” is easily calculated and has a wide application in any assessment of scores. It can also be used to correct C/W/A scores for differing levels of risk aversion. However, it assumes the same willingness of the subject to risk the use positive information as to reject the use of ignorance. The mental treatments of truth and falsity are known to differ (Roediger & Marsh, 2005) , so this needs clarification and/or confirmation. The principles used here provide a solution which is simple and mathematically elegant. Detailed dissection of individual parts is unlikely to change the overall picture, but will complicate the mathematics and the logic. In this paper I have traded numerical accuracy for simplicity so as to provide a framework for the extensive and intensive studies in the literature.

Recently, MTFQs have been discarded, largely because of their bias against risk aversion (Kelly & Dennick, 2009) which appears to be greater in female than male examinees. This bias is real, but can be corrected. MTFQs have the added advantage that gives almost four times that amount of data about student performance as Type A MCQs (Dugdale, 2013; Dugdale, 2015) . Assessment using MTFQs can be far shorter without loss of validity or discrimination of student ranking and performance. The aim of assessments is to find the level of students’ “true knowledge”, “false knowledge” and “ignorance” as well as the way they handle risk. The results we presently get from objective assessments do not give us these data, but give surrogate results which are valid measures of student performance. The student who believes he/she has a large amount of knowledge but much of it is false probably needs different remedial education from a timid student who claims only a small amount of knowledge, but most is correct.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Anderson, L., & Krathwohl, A. (2000). Taxonomy of Teaching and Learning: A Revision of Bloom’s Taxonomy of Educational Objectives. Educational Psychology, 479-480.
[2] Bloom, B. S. (1972). Taxonomy of Educational Objectives: Handbook 1, Cognitive Domain. New York: Mackay.
[3] Burton, R. F. (2002). Misinformation, Partial Knowledge and Guessing in True/False Tests. Medical Education, 36, 805-811.

[4] Burton, R. F. (2004). Multiple Choice and True/False Tests: Reliability Measures and Some Implications of Negative Marking. Assessment & Evaluation in Higher Education, 29, 585-595.

[5] Dugdale, A. (2013). Towards More Efficient Assessments: Increasing Information from Objective Examinations. Creative Education, 4, 39-41.

[6] Dugdale, A. (2015). The Forgotten Dimension: The Information Content of Objective Questions. Creative Education, 6, 1760-1767.

[7] Dugdale, A. E., Chandler, D., & Baghurst, K. (1979). Knowledge and Belief in Nutrition. The American Journal of Clinical Nutrition, 32, 441-445.
[8] Ebel, J. (1968) Blind Guessing in Objective Achievement Tests. Journal of Educational Measurement, 5, 321-325.

[9] Fellows, K. K., & Farah, M. J. (2003). Ventromedial Frontal Cortex Mediates Affective Shifting in Humans: Evidence from a Reversal Learning Paradigm. Brain, 126, 1830-1837.

[10] Kelly, S., & Dennick, R. (2009). Evidence of Gender Bias in True-False-Abstain Medical Examinations. BMC Medical Education, 9, 32.

[11] Loftus, E. F., & Hoffman, H. G. (1989). Misinformation and Memory: The Creation of New Memories. Journal of Experimental Psychology, 118, 100-104.

[12] Roediger III, H. L., & Marsh, E. J. (2005). The Positive and Negative Consequences of Multiple Choice Testing. Journal of Experimental Psychology, Learning, Memory and Cognition, 31, 1155-1159.

[13] Tavakol, M., & Dennick, R. (2011). Post-Examination Analysis of Objective Tests. Medical Teacher, 33, 447-458.

[14] Van der Vleutin, C. P. M., & Schuwirth, I. W. T., Muitjens, A. M. M., Thoben, A. J. N. M., Cohen-Schotanus, J., & van Boven, C. P. A. (2004). Cross Institutional Collaboration in Assessment: A Case on Progress Testing. Medical Teacher, 26, 719-725.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.