Advancement of Hydro-Desulfurization Catalyst and Discussion of Its Application in Coal Tar


This paper describes the influences of active metal, promoter and chelating agent on the properties of hydro-desulfuri-zationcatalyst. The use of chelating agent, especially its combination with common promoters e.g., EDTA-P, has an important meaning to develop highly active catalyst, specifically to unify the active metal dispersion degree and sulfurization degree in some extent, however, they are contradictory in conventional cognition. In the aspect of carriers, composition and nanometer carriers have more excellent performances in acidity, pores structureand metal-carrier interaction than common carriers, and are the developing trend in the future and should be a breakthrough mainly in preparation methods. We also pointed out the decisive factors to improve the activity of the catalyst: higher sulfurization degree of active metal oxide and higher aspect ratios of active phase crystal morphology, and the proper acidity and pores structure can be considered the key factors for deep desulfurization whose mainly obstacle is the desulfurization of large rigid molecules, e.g., dibenzothiophene and 4, 6-dimethyl substituted dibenzothiophene. Based on above that, We discussed the suitable hydrodesulfurization (HDS) catalyst for coal tar, aiming at providing some theoretical guidance for the “design” of coal tar HDS catalyst.

Share and Cite:

Z. Liu, L. Zhang, J. Jiang, C. Bian, Z. Zhang and Z. Gao, "Advancement of Hydro-Desulfurization Catalyst and Discussion of Its Application in Coal Tar," Advances in Chemical Engineering and Science, Vol. 3 No. 1, 2013, pp. 36-46. doi: 10.4236/aces.2013.31004.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Y. Zhang and L. F. Zhao, “Study on Hydro Catalysis of Middle/Low Temperature Coal Tar to Clean Fuel,” Coal Conversion, Vol. 32, No. 3, 2009, pp. 49-51.
[2] B. Q. Ma, P. J. Ren, Z. B. Yang and S. K. Wang, “Preparation of Fuel Oil from Coal Tar,” Chemical Industry Press, Beijing, 2011.
[3] B. Pawelec, R. M. Navarro, J. M. Campos-Martin and J. L. G. Fierro, “Towards near Zero-Sulfur Liquid Fuels: A Perspective Review,” Catalysis Science & Technology, No. 1, 2011, pp. 23-42. doi:10.1039/c0cy00049c
[4] L. Lan, S. H. Ge, K. H. Liu, Y. D. Hong and X. J. Bao, “Synthesis of Ni2P Promoted Trimetallic Ni MoW/γ-Al2O3 Catalysts for Diesel Oil Hydrotreatment,” Journal of Natural Gas Chemistry, Vol. 20, No. 2, pp. 117-122.
[5] L. Zhang, X. Y. Long, D. D. Li and X. D. Gao, “Study on High-Performance Unsupported Ni-Mo-W Hydrotreating Catalyst,” Catalysis Communications, Vol. 12, No. 11, 2011, pp. 927-931.
[6] Y. Zhao, M. W. Xue, M. H. Cao and J. Y. Shen, “A Highly Loaded and Dispersed Ni2P/SiO2 Catalyst for the Hydrotreating Reactions,” Applied Catalysis B: Environmental, Vol. 104, No. 3-4, 2011, pp. 229-233.
[7] C. Sepulveda, V. Bellière, D. Laurenti, N. Escalona and R. García, “Supported Rhenium Sulfide Catalysts in Thiophene and 4,6-Dimethyldibenzo Thiophene Hydrodesulfurization: Effect of Acidity of the Support over Activities,” Applied Catalysis A: General, Vol. 393, No. 1-2, 2011, pp. 288-293.
[8] A. E. Coumans, D. G. Poduval, J. A. Rob van Veen and E. J. M. Hensen, “The Nature of the Sulfur Tolerance of aAmorphous Silica-Alumina Supported NiMo(W) Sulfide and Pt Hydrogenation Catalysts,” Applied Catalysis A: General, Vol. 411-412, 2012, pp. 51-59.
[9] V. L. Parola, M. L. Testa and A. M. Venezia, “Pd and PdAu Catalysts Supported over 3-MPTES Grafted HMS Used in the HDS of Thiophene,” Applied Catalsis B: Environmental, Vol. 119-120, 2012, pp. 248-255. doi:10.1016/j.apcatb.2012.03.007
[10] A. Infantes-Molina, J. A. Cecilia, B. Pawelec, J. L. G. Fierro and E. Rodríguez-Castellón, “Ni2P and CoP Catalysts Prepared from Phosphite-Type Precursors for HDSHDN Competitive Reactions,” Applied Catalysis A: General, Vol. 390, No. 1-2, 2010, pp. 253-263. doi:10.1016/j.apcata.2010.10.019
[11] P. E. Boahene, K. K. Soni, A. K. Dalai and J. Adjaye, “Application of Different Pore Diameter SBA-15 Supports for Heavy Gas Oil Hydrotreatment Using FeW Catalyst”, Applied Catalysis A: General, Vol. 402, No. 1-2, 2011, pp. 31-40.
[12] S. Chouzier, T. Czeri, M. Roy-Auberger, C. Pichon and C. Geantet, “Decomposition of Molybdate-Hexamethylenetetramine Complex: One Single Source Route for Different Catalytic Materials,” Journal of Solid State Chemistry, Vol. 184, No. 10, 2011, pp. 2668-2677.
[13] Q. Ma, P. H. Zeng, S. F. Ji, H. Liu and C. Y. Li, “Effect of Metal Promoters on the Structure and Performance of the Ni2P/SBA-15 Catalyst for Hydrodesulfurization,” Acta Petrolei Sinica (Petroleum Processing Section), Vol. 27, No. 2, 2011, pp. 175-180.
[14] P. F. Zhao, S. F. Ji, N. Wei, Q. Ma and H. Liu, “Effect of Boron Promoter on the Structure and HydrodesuIfurization Activity of Ni2P/SBA-15 Catalysts,” Acta PhysicoChimica Sinica, Vol. 27, No. 7, 2011, pp. 1737-1742.
[15] N. Wei, S. F. Ji, Y. M. Guan, H. Liu and C. Y. Li, “Influence of W on Structure and Hydrodesulfurization Performance of W-Ni2P/SBA-15 Catalysts,” Acta Petrolei Sinica (Petroleum Processing Section), Vol. 27, No. 6, 2011, pp. 852-858.
[16] Y. N. Guo, P. H. Zeng, S. F. Ji and N. Wei, “Effect of Mo Promoter Contenton Performance of Mo-Ni2P/SBA-15/ Cordierite Monolithic Catalyst for Hydrodesulfurization,” Chinese Journal of Catalysis, Vol. 31, No. 3, 2010, pp. 329-334.
[17] M. X. Qin, B. Yu, J. Yang and H. J. Li, “Effects of Metal Modification on Selectivity of Co-Mo/γ-Al2O3 Hydrodesulifcation Catalyst,” Industrial Catalysis, Vol. 17, No. 5, 2009, pp. 45-49.
[18] Y. S. Zhou, Q. Wei, T. Zhang and X. J. Tao, “Effect of Phosphoric Modification on the Heavy Oil Hydrotreating Performance of NiW/CTS Catalysts,” Journal of Fuel Chemistry and Technology, Vo1. 39, No. 10, 2011, pp. 766-770.
[19] D. W. Hui, Q. H. Yang, S. L. Sun and C. F. Niu, “Effect of Phosphorus on the Performance and Active Component Structure of MoCoNi/Al2O3 Catalyst,” Petroleum Processing and Petrochemicals, Vol. 42, No. 5, 2011, pp. 1-4.
[20] S. J. Ardakani and K. J. Smith, “A Comparative Study of Ring Opening of Naphthalene, Tetralin and Decalin over Mo2C/HY and Pd/HY Catalysts,” Applied Catalysis A: General, Vol. 403, No. 1-2, 2011, pp. 36-47. doi:10.1016/j.apcata.2011.06.013
[21] X. B. Liu, S. J. Ardakani and K. J. Smith, “The Effect of Mg and K Addition to a Mo2C/HY Catalyst for the Hydrogenation and Ring Opening of Naphthalene,” Catalysis Communications, Vol. 12, No. 6, 2011, pp. 454-458.
[22] S. K. Maity, M. Lemus and J. Ancheyta, “Effect of Preparation Methods and Content of Boron on Hydrotreating Catalytic Activity,” Energy & Fuels, Vol. 25, No. 7, 2011, pp. 3100-3107.
[23] H. L. Yin, T. N. Zhou, Y. Q. Liu, Y. M. Chai and C. G. Liu, “NiMo/Al2O3 Catalyst Containing Nanosized Zeolite Y for Deep Hydride Sulfurization and Hydrodenitrogenation of Diesel,” Journal of Natural Gas Chemistry, Vol. 20, No. 4, 2011, pp. 441-448. doi:10.1016/S1003-9953(10)60204-6
[24] Q. Wei, Y. S. Zhou, X. J. Tao, T. Zhang and Y. D. Liu, “Catalytic Activities of PY Zeolite Supported Hydrotreating Catalyst,” Acta Petrolei Sinica (Petroleum Processing Section), Vol. 28, No. 1, 2012, pp. 15-20.
[25] T. Klimova, O. Gutiérrez, L. Lizama and J. Amezcua, “Advantages of ZrO2 and TiO2-SBA-15 Mesostructured Supports for Hydride Sulfurization Catalysts over Pure TiO2, ZrO2 and SBA-15,” Microporous and Mesoporous Materials, Vol. 133, 2010, pp. 91-99.
[26] O. Y. Gutiérrez and T. Klimova, “Effect of the Support on the High Activity of the (Ni)Mo/ZrO2 -SBA-15 Catalyst in the Simultaneous Hydridesulfurization of DBT and 4,6-DMDBT,” Journal of Catalysis, Vol. 281, 2011, pp. 50-62.
[27] R. Nava, A. Infantes-Molina, P. Castao, R. Guil-López and B. Pawelec, “Inhibition of CoMo/HMS Catalyst Deactivation in the HDS of 4,6-DMDBT by Support Modification with Phosphate,” Fuel, Vol. 90, No. 8, 2011, pp. 2726-2737. doi:10.1016/j.fuel.2011.03.049
[28] Y. Li, D. H. Pan, C. Z. Yu, Y. Fan and X. J. Bao, “Synthesis and Hydrodesulfurization Properties of NiW Catalyst Supported on High-Aluminum-Content, Highly Ordered, and Hydrothermally Stable Al-SBA-15,” Journal of Catalysis, Vol. 286, 2012, pp. 124-136. doi:10.1016/j.jcat.2011.10.023
[29] N. Malicki, G. Mali, A. A. Quoineaud, P. Bourges and L. J. Simon, “Aluminium Triplets in Dealuminated Zeolites Detected by 27Al NMR Correlation Spectroscopy,” Microporous and Mesoporous Materials, Vol. 129, No. 1-2, 2010, pp. 100-105.
[30] M. Nakamura, “Nanometer Catalyst Technology to Reduce the Dosage of Noble Metal,” Foreign Internal Combustion Engine, Vol. 3, 2011, pp. 35-39.
[31] R. K. Sharma, B. S. Rana, D. Varma, R. Kumar and R. Tiwari, “3-D Mesoporous Titanosilicate Support for Highly Effective Hydrodesulfurization Catalysts,” Microporous and Mesoporous Materials, Vol. 155, 2012, pp. 177-185.
[32] D. Valencia and T. Klimova, “Effect of the Support Composition on the Characteristics of NiMo and CoMo/ (Zr)SBA-15 Catalysts and Their Performance in Deep Hydrodesulfurization,” Catalysis Today, Vol. 166, 2011, pp. 91-101.
[33] Y. Kanda, C. Temma, K. Nakata, T. Kobayashi and M. Sugioka, “Preparation and Performance of Noble Metal Phosphides Supported on Silica as New Hydrodesulfurization Catalysts,” Applied Catalysis A: General, Vol. 386, No. 1-2, 2010, pp. 171-178. doi:10.1016/j.apcata.2010.07.045
[34] S. W. Gong, L. J. Liu, H. F. He and Q. X. Cui, “Dibenzothiophene Hydrodesulfurization over MoP/SiO2 Catalyst Prepared with Sol-Gel Method,” Korean Journal of Chemical Engineering, Vol. 27, No. 5, 2010, pp. 1419-1422. doi:10.1007/s11814-010-0234-3
[35] T. Kan, H. Y. Wang, H. X. He, C. S. Li and S. J. Zhang, “Experimental Study on Two-Stage Catalytic Hydroprocessing of Middle-Temperature Coal Tar to Clean Liquid Fuels,” Fuel, Vol. 90, No. 11, 2011, pp. 3404-3409. doi:10.1016/j.fuel.2011.06.012
[36] Z. H. Yang, L. C. Li, Y. F. Wang, J. L. Liu and X. Feng, “Preparation of Nickel Phosphide/Mesoprous-TiO2 Catalyst and Its Hydrodesulfurization Performance,” Chinese Journal of Catalysis, Vol. 33, No. 3, 2012, pp. 508-517.
[37] D. Q. Zhang, A. J. Duan, Z. Zhao, X. Q. Wang and G. Y. Jiang, “Synthesis, Characterization and Catalytic Performance of Meso-Microporous Material Beta-SBA-15-Supported NiMo Catalysts for Hydrodesulfurization of Dibenzothiophene,” Catalysis Today, Vol. 175, No. 1, 2011, pp. 477-484. doi:10.1016/j.cattod.2011.03.060
[38] J. Francis, E. Guillon, N. Bats, C. Pichon and A. Corma, “Design of Improved Hydrocracking Catalysts by Increasing the Proximity between Acid and Metallic Sites,” Applied Catalysis A: General, Vol. 409-410, 2011, pp. 140-147.
[39] G. Q. Cui, J. F. Wang, H. F. Fan, X. Y. Sun and Y. Jiang, “Towards Understanding the Microstructures and Hydrocracking Performance of Sulfided Ni-W Catalysts: Effect of Metal Loading,” Fuel Processing Technology, Vol. 92, No. 12, 2011, pp. 2320-2327. doi:10.1016/j.fuproc.2011.07.020
[40] C. Leyva, J. Ancheyta, A. Travert, F. Maugé and L. Mariey, “Activity and Surface Properties of NiMo/SiO2-Al2O3 Catalysts for Hydroprocessing of Heavy Oils,” Applied Catalysis A: General, Vol. 425-426, 2012, pp.1-12.
[41] L. B. Pierella, C. Saux, S. C. Caglieri, H. R. Bertorello and P. G. Bercoff, “Catalytic Activity and Magnetic Properties of Co-ZSM-5 Zeolites Prepared by Different Methods,” Applied Catalysis A: General, Vol. 347, No. 1, 2008, pp. 55-61.
[42] S. G. A. Ferraz, F. M. Z. Zotin, L. R. R. Araujo and J. L. Zotin, “Influence of Support Acidity of NiMoS Catalysts in the Activity for Hydrogenation and Hydrocracking of Tetralin,” Applied Catalysis A: General, Vol. 384, No. 1-2, 2010, pp. 51-57.
[43] Y. J. Wang, H. J. Zhang, B. Sun and X. G. Tian, “Research Progress of WO3/ZrO2 in Alkane Isomerization,” Acta Petrolei Sinica (Petroleum Processing Section), Vol. 25, No. 2, 2009, pp. 283-290.
[44] M. X. Du, Zh. F. Qin, H. Ge, X. K. Li and Z. J. Lü, “Enhancement of Pd-Pt/Al2O3 Catalyst Performance in Naphthalene Hydrogenation by Mixing Different Molecular sSieves in the Support,” Fuel Processing Technology, Vol. 91, No. 11, 2010, pp. 1655-1661. doi:10.1016/j.fuproc.2010.07.001
[45] L. Dimitrov, R. Palcheva, A. Spojakina and K. Jiratova, “Synthesis and Characterization of W-SBA-15 and WHMS as Supports for HDS,” Journal of Porous Materials, Vol. 18, No. 4, 2011, pp. 425-434.
[46] H. Shimada, K. Sato, K. Honna, T. Enomoto and N. Ohshio, “Design and Development of Ti-Modified Zeolite-Based cCatalyst for Hydrocracking Heavy Petroleum,” Catalysis Today, Vol. 141, No. 1-2, 2009, pp. 43-51. doi:10.1016/j.cattod.2008.04.012
[47] A. Nogueira, R. Znaiguia, D. Uzio, P. Afanasiev and G. Berhault, “Curved Nanostructures of Unsupported and Al2O3-Supported MoS2 Catalysts: Synthesis and HDS Catalytic Properties,” Applied Catalysis A: General, Vol. 429-430, 2012, pp. 92-105.
[48] V. L. Parola, B. Dragoi, A. Ungureanu, E. Dumitriu and A. M. Venezia, “New HDS Catalysts Based on Thiol Functionalized Mesoporous Silica Supports,” Applied Catalysis A: General, Vol. 386, No. 1-2, 2010, pp. 43-50.
[49] G. L. Yu, Y. S. Zhou, Q. Wei, X. J. Tao and Q.Y. Cui, “A Novel Method for Preparing Well Dispersed and Highly Sulfided NiW Hydridenitrogenation Catalyst,” Catalysis Communications, Vol. 23, 2012, pp. 48-53. doi:10.1016/j.catcom.2012.03.002
[50] M. Ke, X. Y. Wang, Z. Q. Zhang, Z. Z. Song and Q. Z. Jiang, “Preparations and Properties of Selective Hydro-desulfurization Catalysts for FCC Gasoline,” Petrochemical Technology, Vol. 40, No. 2, 2011, pp. 133-139.
[51] C. Q. Li, J. W. Li, X. K. Shang, H. Wang and G. D. Sun, “Dibenzothiophene Hydrodesulfurization Performance of WP/MCM-41 Catalysts Containing Cobalt,” Acta Petrolei Sinica (Petroleum Processing Section), Vol. 27, No. 6, 2011, pp. 859-865.
[52] M. A. Lélias, P. J. Kooyman, L. Mariey, L. Oliviero and A. Travert, “Effect of NTA Addition on the Structure and Activity of the Active Phase of Cobalt-Molybdenum Sulfide Hydrotreating Catalysts,” Journal of Catalysis, Vol. 267, No. 1, 2009, pp. 14-23. doi:10.1016/j.jcat.2009.07.006
[53] M. A. Lélias, E. Le. Guludec, L. Mariey, J. van Gestel and A. Travert, “Effect of EDTA Addition on the Structure and Activity of the Active Phase of Cobalt–Molybdenum Sulfide Hydrotreatment Catalysts,” Catalysis Today, Vol. 150, No. 3-4, 2010, pp. 179-185. doi:10.1016/j.cattod.2009.07.107
[54] K. K. Soni, K. C. Mouli, A.K. Dalai and J. Adjaye, “Effect of Ti Loading on the HDS and HDN Activity of KLGO on NiMo/TiSBA-15 Catalysts,” Microporous and Mesoporous Materials, Vol. 152, 2012, pp. 224-234.
[55] K. C. Mouli, K. Soni, A. Dalai and J. Adjaye, “Effect of Pore Diameter of Ni-Mo/Al-SBA-15 Catalysts on Thehydrotreating of Heavy Gas Oil,” Applied Catalysis A: General, Vol. 404, No. 1-2, 2011, pp. 21-29. doi:10.1016/j.apcata.2011.07.001
[56] P. Biswas, P. Narayanasarma, C. M. Kotikalapudi, A. K. Dalai and J. Adjaye, “Characterization and Activity of ZrO2 Doped SBA-15 Supported NiMo Catalysts for HDS and HDN of Bitumen Derived Heavy Gas Oil,” Industrial & Engineering Chemistry Research, Vol. 50, No. 13, 2011, pp. 7882-7895.
[57] M. A. Al-Daous and S. A. Ali, “Deep Desulfurization of Gas Oil over NiMo Catalysts Supported on Alumina-zirconia Composites,” Fuel, Vol. 97, 2012, pp. 662-669.
[58] T. Kimura, K. Sakashita, X. H. Li and S. Asaoka, “Catalytic Roles of Nano-Sized Oxides Composed with Zeolite for Hydrocracking, Catalytic Cracking and Reforming,” Catalysis Surveys from Asia, Vol. 15, 2011, pp. 259-266.
[59] C. Li, W. A. Deng, X. W. Li, B. Q. Mu and S. F. Li, “Pilot Tests of Medium/Low Temperature Coal Tar Oil Hydro-Upgrading with Heavy Oil Hydro-Treating Catalysts,” Petroleum Refinery Engineering, Vol. 41, No. 9, 2011, pp. 32-35.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.