Technical Note: The Uses of I’mRT MatriXX in Electron Beams

DOI: 10.4236/ijmpcero.2013.21003   PDF   HTML     3,848 Downloads   7,103 Views   Citations


Purpose: The objective of this study is to investigate the properties of I’mRT MatriXX device in electron beams, and to validate MatriXX in electron dosimetry and quality assurance (QA). Methods: The measurements were conducted using MatriXX in electron and photon beams from Siemens linacs. The MatriXX was placed horizontally on the linac tabletop. Solid Water layers were used for buildup. For all the measurements, the linac gantry angle was 0?, and the source-to-surface distance was100 cmfrom the Solid Water surface. The electron cone factors, cutout factors, and beam profiles were measured and compared with thimble ionization chamber results. Results: The effective water equivalent depth of MatriXX measurement point is larger than4 mm. When measuring at the respective depths of maximum dose, MatriXX has different responses to different beam energies. The cone factors measured by MatriXX are nearly identical or close to those derived by ionization chambers. Beam profiles (flatness and symmetry) can be easily determined using MatriXX and are comparable to water tank results. The planar dose map of electron cutout blocks can be visually observed, and the cutout factors can be conveniently measured. Conclusions: The MatriXX needs separate dose calibration factors for electron and photon beams. MatriXX can be used to measure electron cutout factors and beam profiles, thus has the potentials in electron beam dosimetry and routine linac and patient-specific QA tests.

Share and Cite:

M. Zhang, S. Li, H. Deng and S. Zhou, "Technical Note: The Uses of I’mRT MatriXX in Electron Beams," International Journal of Medical Physics, Clinical Engineering and Radiation Oncology, Vol. 2 No. 1, 2013, pp. 15-18. doi: 10.4236/ijmpcero.2013.21003.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] J. Herzen, M. Todorovic, F. Cremers, V. Platz, D. Albers, A. Bartels and R. Schmidt, “Dosimetric Evaluation of a 2D Pixel Ionization Chamber for Implementation in Clinical Routine,” Physics in Medicine and Biology, Vol. 52, No. 4, 2007, pp. 1197-1208. doi:10.1088/0031-9155/52/4/023
[2] J.G. Li, G. Yan and C. Liu, “Comparison of Two Commercial Detector Arrays for IMRT Quality Assurance,” Journal of Applied Clinical Medical Physics, Vol. 10, No. 2, 2009, pp. 63-74. doi:10.1120/jacmp.v10i2.2942
[3] E. Schreibmann, A. Dhabaan, E. Elder and T. Fox, “Patient-Specific Quality Assurance Method for VMAT Treatment Delivery,” Medical Physics, Vol. 36, No. 10, 2009, pp. 4530-4535. doi:10.1118/1.3213085
[4] J. O’Daniel, S. Das, Q. J. Wu and F. F. Yin, “Volumetric-Modulated Arc Therapy: Effective and Efficient End-to-End Patient-Specific Quality Assurance,” International Journal of Radiation Oncology, Biology, Physics, Vol. 82, No. 5, 2012, pp. 1567-1574. doi:10.1016/j.ijrobp.2011.01.018
[5] B. Arjomandy, N. Sahoo, X. Ding and M. Gillin, “Use of a Two-Dimensional Ionization Chamber Array for Proton Therapy Beam Quality Assurance,” Medical Physics, Vol. 35, No. 9, 2008, pp. 3889-3894. doi:10.1118/1.2963990
[6] M. Zhang, S. Li, H. Deng and S. Zhou, “The Applications of MatriXX to Electron Beam Dosimetry,” Medical Physics, Vol. 37, No. 6, 2007, p. 3268. doi:10.1118/1.3468756
[7] F. Rosca, “A Hybrid Electron and Photon IMRT Planning Technique That Lowers Normal Tissue Integral Patient Dose Using Standard Hardware,” Medical Physics, Vol. 39, No. 6, 2012, pp. 2964-2971. doi:10.1118/1.4709606

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.