Virtual Simulations of Roughness of a Road-Surface - Articles

An Evaluation of Immersive Laboratory in Microbiology Teachings (Articles)

Eduardo F. Damasceno, Larissa B. Fernandes, Armando P. Da Silva, Sara T. Moreira

Creative Education Vol.15 No.8，August 19, 2024

DOI: 10.4236/ce.2024.158104 97 Downloads 1,096 Views Citations
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6，July 1, 2010

DOI: 10.4236/eng.2010.26059 9,037 Downloads 15,990 Views Citations
Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant (Articles)

Jeong-Du Kim, Keon-Beom Lee

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210101 6,268 Downloads 10,726 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 3,962 Downloads 6,273 Views Citations
Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy (Articles)

Riyadh A. Al-Samarai, Haftirman , Khairel Rafezi Ahmad, Y. Al-Douri

J. of Surface Engineered Materials and Advanced Technology Vol.2 No.3，July 25, 2012

DOI: 10.4236/jsemat.2012.23027 7,962 Downloads 12,613 Views Citations
Relative Depth Effects on Corrugated Culvert Roughness (Articles)

Jonathan Scott Toews, Shawn Paul Clark

Journal of Water Resource and Protection Vol.4 No.10，October 30, 2012

DOI: 10.4236/jwarp.2012.410096 4,348 Downloads 6,562 Views Citations
Evaluation of a Simple Hydraulic Resistance Model Using Flow Measurements Collected in Vegetated Waterways (Articles)

Fredrik Huthoff, Menno W. Straatsma, Denie C. M. Augustijn, Suzanne J. M. H. Hulscher

Open Journal of Modern Hydrology Vol.3 No.1，January 28, 2013

DOI: 10.4236/ojmh.2013.31005 4,339 Downloads 7,991 Views Citations
Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool (Articles)

Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi

Modern Mechanical Engineering Vol.4 No.1，December 30, 2013

DOI: 10.4236/mme.2014.41001 7,505 Downloads 15,274 Views Citations
A Contact Model for Establishment of Hip Joint Implant Wear Metrics (Articles)

Mohammad Hodaei, Kambiz Farhang, Nazanin Maani

Journal of Biomedical Science and Engineering Vol.7 No.4，March 20, 2014

DOI: 10.4236/jbise.2014.74026 5,318 Downloads 8,202 Views Citations
Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO₂ Coating on Commercially Pure Ti Discs (Articles)

Sinem Yeniyol, Bahadır Kepenek, Ayhan Bilir, Ali Fuat Çakır, Nilüfer Bölükbaşı, Mefail Yeniyol, Tayfun Özdemir

Materials Sciences and Applications Vol.5 No.5，March 31, 2014

DOI: 10.4236/msa.2014.55029 3,400 Downloads 5,340 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7，July 8, 2014

DOI: 10.4236/msce.2014.27004 2,479 Downloads 3,950 Views Citations
Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing (Articles)

Koji Araki, Ryuji Takeda, Haruo Sudo, Koji Izunome, Xinwei Zhao

J. of Surface Engineered Materials and Advanced Technology Vol.4 No.5，August 6, 2014

DOI: 10.4236/jsemat.2014.45028 4,663 Downloads 5,925 Views Citations
This article belongs to the Special Issue on Surface Modification
Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation (Articles)

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl

Modeling and Numerical Simulation of Material Science Vol.4 No.4，October 10, 2014

DOI: 10.4236/mnsms.2014.44017 5,471 Downloads 6,940 Views Citations
Surface Roughness Modification of Free Standing Single Crystal Silicon Microstructures Using KrF Excimer Laser Treatment for Mechanical Performance Improvement (Articles)

Mohamed Elwi Mitwally, Toshiyuki Tsuchiya, Osamu Tabata, Sherif Sedky

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.1，January 6, 2015

DOI: 10.4236/jsemat.2015.51004 3,603 Downloads 4,658 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Studying the Preheating Effect on Certain Mechanical Properties of the Coating Layer by Vacuum Ion Plasma Coating (Articles)

Abdul Jaleel Hamad Majeed

Modern Mechanical Engineering Vol.5 No.4，November 11, 2015

DOI: 10.4236/mme.2015.54010 4,337 Downloads 5,342 Views Citations
Evaluation of Surface Roughness of Metal and Alloy Material (Articles)

Joon-Seong Lee

Journal of Materials Science and Chemical Engineering Vol.4 No.1，January 11, 2016

DOI: 10.4236/msce.2016.41013 4,348 Downloads 6,717 Views Citations
Investigating the Effect of Relative Width on Momentum Transfer between Main Channel and Floodplain in Rough Rectangular Compound Channel Sunder Varius Relative Depth Condition (Articles)

Shima Bahadori, Mehdi Behdarvandi Askar

Open Journal of Geology Vol.6 No.4，April 13, 2016

DOI: 10.4236/ojg.2016.64020 2,313 Downloads 3,215 Views Citations
Recurrence Quantification Analysis of Rough Surfaces Applied to Optical and Speckle Profiles (Articles)

Oscar Sarmiento Martinez, Darwin Mayorga Cruz, Jorge Uruchurtu Chavarín, Estela Sarmiento Bustos

Journal of Applied Mathematics and Physics Vol.4 No.4，April 27, 2016

DOI: 10.4236/jamp.2016.44083 1,944 Downloads 3,227 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 3,936 Downloads 6,964 Views Citations
Neural Network Modeling and Prediction of Surface Roughness in Machining Aluminum Alloys (Articles)

N. Fang, N. Fang, P. Srinivasa Pai, N. Edwards

Journal of Computer and Communications Vol.4 No.5，May 13, 2016

DOI: 10.4236/jcc.2016.45001 2,908 Downloads 4,488 Views Citations

<...345 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies