Volume 2, Number 10, October 2010 (Special Issue on )

Cover Page, Table of Contents and Others: PDF (size: 32KB)

• Effect of Periodic Variation of Sol-air Temperature on the Performance of Integrated Solar Collector Storage System ()
  Nawaf H. Saeid, Tan Jun Wong
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210106    6,000 Downloads  11,244 Views   Citations
  This article belongs to the Special Issue on
• A Fast Predicating of Nutrient Removal Efficiency in Five Steps Sequencing Batch Reactor System Using Fuzzy Logic Control Model ()
  Saad Abualhail, Rusul Naseer, Ammar Ashor, Xi-Wu Lu
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210105    4,688 Downloads  8,797 Views   Citations
  This article belongs to the Special Issue on
• Nonlinear Control of an Induction Motor Using a Reduced-Order Extended Sliding Mode Observer for Rotor Flux and Speed Sensorless Estimation ()
  Olivier Asseu, Michel Abaka Kouacou, Theophile Roch Ori, Zié Yéo, Malandon Koffi, Xuefang Lin-Shi
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210104    6,981 Downloads  12,477 Views   Citations
  This article belongs to the Special Issue on
• Using Image Analysis for Structural and Mechanical Cha-racterization of Nanoclay Reinforced Polypropylene Com-posites ()
  Turup Pandurangan Mohan, Krishnan Kanny
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210103    5,355 Downloads  9,541 Views   Citations
  This article belongs to the Special Issue on
• Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid ()
  K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210102    5,209 Downloads  9,789 Views   Citations
  This article belongs to the Special Issue on
• Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant ()
  Jeong-Du Kim, Keon-Beom Lee
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210101    6,192 Downloads  10,566 Views   Citations
  This article belongs to the Special Issue on
• Geometric Inversion of Two-Dimensional Stokes Flows – Application to the Flow between Parallel Planes ()
  Mustapha Hellou
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210100    6,129 Downloads  10,563 Views   Citations
  This article belongs to the Special Issue on
• Analysis of the Manufactured Tolerances with the Three-Dimensional Method of Angular Chains of Dimensions Applied to a Cylinder Head of Car Engine ()
  Aida Mezghani, Alain Bellacicco, Jamel Louati, Alain Rivière, Mohamed Haddar
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210099    5,433 Downloads  9,304 Views   Citations
  This article belongs to the Special Issue on
• Modelling and Optimisation of a Spring-Supported Diaphragm Capacitive MEMS Microphone ()
  Norizan Mohamad, Pio Iovenitti, Thurai Vinay
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210098    11,044 Downloads  18,438 Views   Citations
  This article belongs to the Special Issue on
• Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling ()
  Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra
  Engineering Vol.2 No.10,  November 29, 2010
  DOI: 10.4236/eng.2010.210097    7,940 Downloads  15,249 Views   Citations
  This article belongs to the Special Issue on