High Hardness - Articles - Scientific Research Publishing

Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds (Articles)

J. O. Olawale, S. A. Ibitoye, K.M. Oluwasegun, M. D. Shittu, R. C. Ofoezie

J. of Minerals and Materials Characterization and Eng. Vol.11 No.9，September 25, 2012

DOI: 10.4236/jmmce.2012.119084 8,590 Downloads 12,415 Views Citations
Correlation between Hardness, Structure and Electrochemical Performance of an AlZnMnMg Alloy (Articles)

S. Valdez, B. Campillo, J. J. Islas

Engineering Vol.4 No.9，September 28, 2012

DOI: 10.4236/eng.2012.49075 9,341 Downloads 12,007 Views Citations
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites (Articles)

Hillol Joardar, Goutam Sutradhar, Nitai Sundar Das

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110100 5,924 Downloads 7,748 Views Citations
Effect of Soaking Temperature on Physical and Functional Properties of Parboiled Rice Cultivars Grown in Temperate Region of India (Articles)

Shabir Ahmad Mir, Sowriappan John Don Bosco

Food and Nutrition Sciences Vol.4 No.3，March 19, 2013

DOI: 10.4236/fns.2013.43038 7,374 Downloads 12,101 Views Citations
Effect of Silicon Additions on the Wear Properties of Grey Cast Iron (Articles)

Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie

J. of Minerals and Materials Characterization and Eng. Vol.1 No.2，March 29, 2013

DOI: 10.4236/jmmce.2013.12012 8,957 Downloads 13,405 Views Citations
Optimizing the Properties of Polyether Based Polyurethane Foam (Articles)

F. O. Aramide, P. O. Atanda, E. O. Olorunniwo

Open Journal of Polymer Chemistry Vol.3 No.4，September 17, 2013

DOI: 10.4236/ojpchem.2013.34015 8,341 Downloads 12,813 Views Citations
Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress (Articles)

Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama

J. of Surface Engineered Materials and Advanced Technology Vol.3 No.4，October 8, 2013

DOI: 10.4236/jsemat.2013.34035 10,560 Downloads 15,679 Views Citations
Comparative Study of the Impact of Corundum Particle Contaminants Size on Wear and Fatigue Life of Grease Lubricated Ball Bearings (Articles)

D. Koulocheris, A. Stathis, Th. Costopoulos, G. Gyparakis

Modern Mechanical Engineering Vol.3 No.4，November 5, 2013

DOI: 10.4236/mme.2013.34023 9,646 Downloads 29,170 Views Citations
Effect of Diode Laser 810nm in Hardness of Dental Ceramic (Articles)

Mubarak M. Ahmed, Abdelaziz Hagar Abdelrahman, Elhadi Mohieldin, Samia Omer Yagoub

Optics and Photonics Journal Vol.4 No.5，May 30, 2014

DOI: 10.4236/opj.2014.45011 3,680 Downloads 5,050 Views Citations
Effect of Shakeout Time on Microstructure and Hardness Properties of Grey Cast Iron (Articles)

Saliu Ojo Seidu, Daniel Toyin Oloruntoba, Iyiola Olatunji Otunniyi

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 30, 2014

DOI: 10.4236/jmmce.2014.24039 3,917 Downloads 4,985 Views Citations
A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys (Articles)

Avijit Sinha, Zoheir Farhat

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.1，December 26, 2014

DOI: 10.4236/jsemat.2015.51001 5,804 Downloads 7,348 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Influence of Wettability and Mechanical Properties on Tribological Performance of DLC Coatings under Water Lubrication (Articles)

Chaoqun Zhang, Masahiro Fujii

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.3，June 8, 2015

DOI: 10.4236/jsemat.2015.53013 4,787 Downloads 6,588 Views Citations
The Effects of Sintering Temperature on the Densification of Mechanically Alloyed W-Brass Composites (Articles)

Baba Gowon, Kahtan S. Mohammed, Shamsul Baharin Bin Jamaluddin, Zuhailawati Hussain, Polycarp Evarastics

Open Journal of Metal Vol.5 No.3，August 20, 2015

DOI: 10.4236/ojmetal.2015.53003 3,718 Downloads 5,093 Views Citations
Synthesis and Densification of Tungsten-Brass Composite by Mechanical Alloying (Articles)

Kahtan S. Mohammed, Baba Gowon, Shamsul Baharin Bin Jamaluddin, Zuhailawati Hussain, Polycarp Evarastics

Open Journal of Metal Vol.5 No.3，September 1, 2015

DOI: 10.4236/ojmetal.2015.53004 4,020 Downloads 5,062 Views Citations
Comparative Study on Conventional Sintering with Microwave Sintering and Vacuum Sintering of Y₂O₃-Al₂O₃-ZrO₂ Ceramics (Articles)

Mayur Shukla, Sumana Ghosh, Nandadulal Dandapat, Ashis K. Mandal, Vamsi K. Balla

Journal of Materials Science and Chemical Engineering Vol.4 No.2，February 17, 2016

DOI: 10.4236/msce.2016.42008 4,639 Downloads 6,841 Views Citations
A Comparative Physiochemical Properties of Esomeprazole Brands (Articles)

Safila Naveed, Fatima Qamar

Open Access Library Journal Vol.1 No.6，September 15, 2014

DOI: 10.4236/oalib.1100614 1,757 Downloads 2,560 Views Citations
Concrete Compressive Strength Estimation by Means of Nondestructive Testing: A Case Study (Articles)

Yuri Danilo Lopes, Leandro Vanalli, Vladimir José Ferrari

Open Journal of Civil Engineering Vol.6 No.4，September 2, 2016

DOI: 10.4236/ojce.2016.64043 3,420 Downloads 6,961 Views Citations
Metallurgical Analysis of Brake Blocks (Articles)

Mathioro Fall, Fadel Niang, Olivier Hubert, Mamadou Babacar Ndiaye

Open Journal of Metal Vol.7 No.1，March 29, 2017

DOI: 10.4236/ojmetal.2017.71001 1,520 Downloads 2,678 Views Citations
The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test (Articles)

Mohammad S. Alsoufi, Tahani M. Bawazeer, Mohammed W. Alhazmi, Sufyan Azam

Materials Sciences and Applications Vol.8 No.7，July 3, 2017

DOI: 10.4236/msa.2017.87036 1,218 Downloads 3,583 Views Citations
Hydrodynamic Modelling, Thermodynamic and Textural Variations during Common Beans Soaking (Articles)

E. M. Kwofie, O. I. Mba, M. Ngadi

Advances in Chemical Engineering and Science Vol.9 No.1，January 4, 2019

DOI: 10.4236/aces.2019.91003 866 Downloads 1,643 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies