Injection Mold - Articles - Scientific Research Publishing

Determination of Optimal Manufacturing Parameters for Injection Mold by Inverse Model Basing on MANFIS (Articles)

Chung-Neng Huang, Chong-Ching Chang

Journal of Intelligent Learning Systems and Applications Vol.2 No.1，March 1, 2010

DOI: 10.4236/jilsa.2010.21004 9,801 Downloads 20,576 Views Citations
Investigation of Viscosity's Effects on Continuous Casting of Steel Mold Powders Containing B₂O₃, Li₂O, TiO₂, Fe₂O₃, ZnO and Na₂O (Articles)

Ahmadreza Arefpour, Ahmad Monshi, Taghi Khayamian, Ali Saidi

Engineering Vol.4 No.8，August 31, 2012

DOI: 10.4236/eng.2012.48057 7,483 Downloads 13,236 Views Citations
Study of Weak Acid Preservatives and Modified Atmosphere Packaging (MAP) on Mold Growth in Modal Agar System (Articles)

Salah M. Hasan, Ramadan A. Abdolgader

Food and Nutrition Sciences Vol.3 No.6，June 20, 2012

DOI: 10.4236/fns.2012.36108 7,377 Downloads 11,117 Views Citations
Spectral footprint of Botrytis cinerea, a novel way for fungal characterization (Articles)

Mohamed Aboelghar, Hala Abdel Wahab

Advances in Bioscience and Biotechnology Vol.4 No.3，March 20, 2013

DOI: 10.4236/abb.2013.43050 5,668 Downloads 8,840 Views Citations
Measurement of the In-Plane Thermal Conductivity of Long Fiber Composites by Inverse Analysis (Articles)

Bassam Assaf, Vincent Sobotka, François Trochu

Open Journal of Composite Materials Vol.7 No.2，May 2, 2017

DOI: 10.4236/ojcm.2017.72005 2,004 Downloads 5,007 Views Citations
Modeling and Simulation of Heat Transfer Phenomenon Related to Mold Heating during Investment Casting (Articles)

Muhammad Musaddique Ali Rafique, Umair Shah

Engineering Vol.12 No.5，May 27, 2020

DOI: 10.4236/eng.2020.125024 761 Downloads 2,639 Views Citations
The Effect of Nitrogen Gas Cooling Which Is Used in Aluminium Extrusion Mold on Production Efficiency (Articles)

Merve Ozcan, Cemal Ozsut, Oguzhan Deveci, Gulbahar Bentesen

Open Journal of Applied Sciences Vol.11 No.4，April 14, 2021

DOI: 10.4236/ojapps.2021.104030 462 Downloads 2,012 Views Citations
Assessment of a New Senegalese Sorghum (Sorghum bicolor (L.) Moench) Collection for Grain Yield and Tolerance to Anthracnose and Grain Molds (Articles)

Ghislain Kanfany, Mame Diarra Sylla, Cyril Diatta, Mame Penda Sarr, Souleymane Bodian, Yedomon Ange Bovys Zoclanclounon

American Journal of Plant Sciences Vol.16 No.1，January 9, 2025

DOI: 10.4236/ajps.2025.161001 65 Downloads 272 Views Citations
Disease Cycle, Development and Management of Sclerotinia Stem Rot of Potato (Articles)

Dennis A. Johnson, Zahi K. Atallah

American Journal of Plant Sciences Vol.5 No.25，December 15, 2014

DOI: 10.4236/ajps.2014.525388 6,446 Downloads 8,705 Views Citations
This article belongs to the Special Issue on Plant Pathology
Characterization of Egyptian Botrytis cinerea Isolates from Different Host Plants (Articles)

Hala Abdel Wahab

Advances in Microbiology Vol.5 No.3，March 20, 2015

DOI: 10.4236/aim.2015.53017 4,324 Downloads 5,839 Views Citations
Characterizations and Analysis of the Mold from Animal Specimens in Shenzhen Museum (Articles)

Rui Zhang, Kang Wang, Meirong Sun, Bo Zhang, Honglian Zhang, Sidong Li, Hui Du, Yanlin Lu, Yang Ye, Xiaoqiang Yu

Journal of Environmental Protection Vol.7 No.7，June 16, 2016

DOI: 10.4236/jep.2016.77091 2,193 Downloads 3,250 Views Citations
This article belongs to the Special Issue on Environmental Toxicology and Human Health
Mapping and Quantifying White Mold in Soybean across South Dakota Using Landsat Images (Articles)

Confiance Mfuka, Xiaoyang Zhang, Emmanuel Byamukama

Journal of Geographic Information System Vol.11 No.3，June 18, 2019

DOI: 10.4236/jgis.2019.113020 961 Downloads 2,202 Views Citations
Appropriate Needle Lengths Determined Using Ultrasonic Echograms for Intramuscular Injections in Japanese Infants (Articles)

Tetsuo Nakayama, Urara Kohdera, Motoko Fujino, Toshihiro Tanaka, Keitaro Yatabe, Tomoyuki Hashiguchi, Tomohide Sato, Minoru Kino

Open Journal of Pediatrics Vol.6 No.2，June 6, 2016

DOI: 10.4236/ojped.2016.62024 5,801 Downloads 9,250 Views Citations
Complications Following Inappropriate Intravitreal Triamcinolone Acetonide Injection (Articles)

Yukishige Nakaseko, Mai Kamatani, Mineo Kondo, Yukitaka Uji, Masahiko Sugimoto

Open Journal of Ophthalmology Vol.2 No.4，November 23, 2012

DOI: 10.4236/ojoph.2012.24024 4,335 Downloads 6,655 Views Citations
Retrospective Review Investigating the Efficacy of the Gray/Campbell Migraine Injection Protocol for OnabotulinumtoxinA (A Modified PREEMPT Injection Paradigm for Chronic Migraine Treatment) (Articles)

Colin Campbell, Terence K. Gray, Ajay Challapalli, Grace Gray

Pain Studies and Treatment Vol.13 No.1，January 7, 2025

DOI: 10.4236/pst.2025.131003 35 Downloads 404 Views Citations
Study on Advanced Water Injection Time in Low Permeability Reservoir (Articles)

Lijun Wang, Linli Wei

Energy and Power Engineering Vol.3 No.2，May 18, 2011

DOI: 10.4236/epe.2011.32025 7,073 Downloads 12,046 Views Citations
Injection Scheme Optimization of Foam Profile Control on Block S103 (Articles)

Hongjun Yin, Chuan Liu, Meinan Wang

Engineering Vol.6 No.1，January 13, 2014

DOI: 10.4236/eng.2014.61002 3,475 Downloads 5,142 Views Citations
Research on Optimization Design of Deep Profile Control Injection Scheme in Block S (Articles)

Meinan Wang, Shaopeng Wang, Wei Zhang, Xiaoqi Chen, Junting Zhang

Open Journal of Applied Sciences Vol.13 No.11，November 27, 2023

DOI: 10.4236/ojapps.2023.1311160 80 Downloads 265 Views Citations
Steel Pitting Corrosion Analysis, Using a High Vaccum Epoxy Penetration Technique (Articles)

Gerardo Zavala Olivares, Mónica J. Hernández Gayosso, Rafael García Esquivel

Materials Sciences and Applications Vol.4 No.1，January 24, 2013

DOI: 10.4236/msa.2013.41002 5,583 Downloads 7,643 Views Citations
Management of Vascular Malformations in Dangerous Area of Oral Cavity: The Iranian Experience and Review of Treatment Modalities (Review)

Somayeh Alirezaei, Maryam Baharvand, Masood Rezaei, Arash Azizi, Bita Tavakoli

Open Journal of Stomatology Vol.4 No.3，March 13, 2014

DOI: 10.4236/ojst.2014.43018 4,659 Downloads 6,527 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies