Cutting Force Measurement - Articles - Scientific Research Publishing

Fabrication, Characterization and Machining of Al6061 Reinforced with Red Mud Composite (Articles)

Poorna Chandra, V. Ravi Kumar, R. Kiran, D. V. Ravi Kumar, C. R. Prakash Rao, R. Suresh

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.1, January 24, 2022

DOI: 10.4236/jmmce.2022.101003 499 Downloads 1,976 Views Citations
Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling (Articles)

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Engineering Vol.2 No.10, November 29, 2010

DOI: 10.4236/eng.2010.210097 8,303 Downloads 16,409 Views Citations
Identifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis (Articles)

M. M. Reddy, S. R. Kostka, N. S. Reddy

Journal of Surface Engineered Materials and Advanced Technology Vol.10 No.3, July 12, 2020

DOI: 10.4236/jsemat.2020.103004 640 Downloads 1,885 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,214 Downloads 6,872 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7, July 8, 2014

DOI: 10.4236/msce.2014.27004 2,654 Downloads 4,459 Views Citations
The Use of Light Diffracted from Grating Etched onto the Backside Surface of an Atomic Force Microscope Cantilever Increases the Force Sensitivity (Articles)

Sergey K. Sekatskii, Mounir Mensi, Andrey G. Mikhaylov, Giovanni Dietler

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.4A, October 22, 2013

DOI: 10.4236/jsemat.2013.34A1004 3,499 Downloads 5,468 Views Citations
This article belongs to the Special Issue on Atomic Force Microscopy
Application of FVM Analysis for Elastic Characteristics on Cutting Process of a Composited Coating Iron (Articles)

Jaegwi Go, Je-Hyun Lee

Applied Mathematics Vol.5 No.18, October 30, 2014

DOI: 10.4236/am.2014.518274 2,465 Downloads 3,800 Views Citations
This article belongs to the Special Issue on Mathematical Modeling and Experiment
Evaluation of Flight Trajectory and Unsteady Fluid Forces on Kicked Non-Spinning Soccer Ball by Digital Image Analysis (Articles)

Takayuki Yamagata, Takuya Nagasawa, Nobuyuki Fujisawa, Takeshi Asai

Journal of Flow Control, Measurement & Visualization Vol.1 No.3, October 8, 2013

DOI: 10.4236/jfcmv.2013.13011 4,967 Downloads 9,181 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 391 Downloads 1,328 Views Citations
Effects of Cutting Interval between Harvests on Dry Matter Yield and Nutritive Value in Alfalfa (Articles)

Doohong Min

American Journal of Plant Sciences Vol.7 No.8, June 17, 2016

DOI: 10.4236/ajps.2016.78118 2,889 Downloads 4,914 Views Citations
A Polynomial Algorithm of Optimum Cutting a Rectangle into Rectangles with Two Heights (Articles)

M. Z. Arslanov

American Journal of Operations Research Vol.4 No.1, January 23, 2014

DOI: 10.4236/ajor.2014.41003 4,264 Downloads 6,570 Views Citations
Vegetable and Mineral Used Oils as Cutting Fluids: Effect on Surface Roughness of Aluminum Alloy (Articles)

Nabeel Gharaibeh

Journal of Surface Engineered Materials and Advanced Technology Vol.6 No.4, October 12, 2016

DOI: 10.4236/jsemat.2016.64016 3,681 Downloads 7,441 Views Citations
Centrifugal force: an appreciation (Articles)

Kern E. Kenyon

Natural Science Vol.3 No.7, July 25, 2011

DOI: 10.4236/ns.2011.37086 7,316 Downloads 15,114 Views Citations
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9, September 23, 2011

DOI: 10.4236/eng.2011.39114 5,558 Downloads 10,010 Views Citations
Elucidation on Reactions Thermodynamics and Kinetics of OFC-A of Steels (Articles)

A.V. Adedayo

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.7, July 20, 2010

DOI: 10.4236/jmmce.2010.97043 4,024 Downloads 5,898 Views Citations
Evaluating the Impacts of Forest Clear Cutting on Water and Sediment Yields Using SWAT in Mississippi (Articles)

Sunita Khanal, Prem B. Parajuli

Journal of Water Resource and Protection Vol.5 No.4, April 25, 2013

DOI: 10.4236/jwarp.2013.54047 6,001 Downloads 11,298 Views Citations
The Biology of Szelenyiopria talitae (Hymenoptera: Diapriidae): Larval Parasitoid of the Leaf-Cutting Ant Acromyrmex subterraneus (Hymenoptera: Formicidae) (Articles)

Thalles Cardoso Mattoso, Denise Delores Oliveira Moreira, Thais Berçot Pontes Teodoro, Claudio Luiz Moreira de Souza, Rita de Kássia Guarnier da Silva, Veronica de Morais, Carlos Peres Silva, Milton Erthal Jr., Richard Ian Samuels

Advances in Entomology Vol.9 No.3, July 26, 2021

DOI: 10.4236/ae.2021.93012 487 Downloads 1,768 Views Citations
Assessment of Female Genital Cutting Practice and Its Drivers among Women of Reproductive Age in a Rural Community in South-West Nigeria (Articles)

Rachael Y. Ogunseun, Akintunde O Fehintola, Temitope Ilori, Akinfolarin C. Adepiti, Elizabeth O. Olagunju, Adekemi Olowokere, Caleb A Adegbenro, Anu S. Olowookere

Open Journal of Obstetrics and Gynecology Vol.14 No.12, December 23, 2024

DOI: 10.4236/ojog.2024.1412154 151 Downloads 984 Views Citations
The Study of Dichinama Marble Waste and Its Utilization in Tigray Ethiopia (Articles)

Kiross Haile Zeweli, Meskerem Teshome Hailu

International Journal of Nonferrous Metallurgy Vol.12 No.1, January 27, 2025

DOI: 10.4236/ijnm.2025.121001 153 Downloads 1,070 Views Citations
Response of Selected Species of Yam (Dioscorea spp.) Vine Cuttings to Different Growing Media (Articles)

Sootino Salaevalu Samau Taungakava, Leslie Toralba Ubaub, Sanjay Anand, Falaniko Faumuina Amosa

Agricultural Sciences Vol.16 No.11, November 28, 2025

DOI: 10.4236/as.2025.1611073 74 Downloads 764 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies