Taguchi Method - Articles - Scientific Research Publishing

Parameters Optimization for Piezoelectric Harvesting Energy from Pavement Based on Taguchi’s Orthogonal Experiment Design (Articles)

Chunhua Sun, Hongbing Wang, Guangqing Shang, Jianhong Du

World Journal of Engineering and Technology Vol.3 No.4，November 3, 2015

DOI: 10.4236/wjet.2015.34016 3,247 Downloads 4,460 Views Citations
Experimental Investigation of Laser Welding Process in Butt-Joint Configurations (Articles)

Laurent Jacques, Abderrazak El Ouafi

World Journal of Engineering and Technology Vol.5 No.1，February 22, 2017

DOI: 10.4236/wjet.2017.51007 2,240 Downloads 4,471 Views Citations
This article belongs to the Special Issue on Welding and Cutting Technology
Experimental Investigation of Laser Welding Process in Overlap Joint Configuration (Articles)

Kamel Oussaid, Abderrazak El Ouafi, Ahmed Chebak

Journal of Materials Science and Chemical Engineering Vol.7 No.3，March 27, 2019

DOI: 10.4236/msce.2019.73002 1,251 Downloads 3,153 Views Citations
A Three-Dimensional Numerical Model for Predicting the Weld Bead Geometry Characteristics in Laser Overlap Welding of Low Carbon Galvanized Steel (Articles)

Kamel Oussaid, Abderrazak El Ouafi

Journal of Applied Mathematics and Physics Vol.7 No.10，October 8, 2019

DOI: 10.4236/jamp.2019.710149 1,024 Downloads 2,783 Views Citations
This article belongs to the Special Issue on Application of Mathematical Models in Physics and Engineering
Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Modeling and Numerical Simulation of Material Science Vol.10 No.3，July 17, 2020

DOI: 10.4236/mnsms.2020.103003 603 Downloads 1,522 Views Citations
A New Model for Strategy Formulation Using Mahalanobis-Taguchi System and Clustering Algorithm (Articles)

Ali Hadighi, Iraj Mahdavi

Intelligent Information Management Vol.3 No.5，September 20, 2011

DOI: 10.4236/iim.2011.35024 5,145 Downloads 9,483 Views Citations
Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites - A Taguchi Approach (Articles)

S.R. Chauhan, Anoop Kumar, I. Singh, Prashant Kumar

J. of Minerals and Materials Characterization and Eng. Vol.9 No.4，April 20, 2010

DOI: 10.4236/jmmce.2010.94027 7,470 Downloads 10,909 Views Citations
Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis (Articles)

Suman Kalyan Das, Prasanta Sahoo

J. of Minerals and Materials Characterization and Eng. Vol.10 No.14，November 25, 2011

DOI: 10.4236/jmmce.2011.1014103 6,591 Downloads 9,011 Views Citations
Minimalization of Ash from Iranian Gilsonite by Froth Flotation (Articles)

Ramona Javadi Doodran, Shayan Khakmardan, Aref Shirazi, Adel Shirazy

J. of Minerals and Materials Characterization and Eng. Vol.9 No.1，December 23, 2020

DOI: 10.4236/jmmce.2021.91001 554 Downloads 2,472 Views Citations
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach (Articles)

S. Basavarajappa, K.V. Arun, J. Paulo Davim

J. of Minerals and Materials Characterization and Eng. Vol.8 No.5，May 20, 2009

DOI: 10.4236/jmmce.2009.85034 8,161 Downloads 11,850 Views Citations
Utilization of Industrial Waste Slag as Aggregate in Concrete Applications by Adopting Taguchi’s Approach for Optimization (Articles)

Mohammed Nadeem, Arun D. Pofale

Open Journal of Civil Engineering Vol.2 No.3，September 27, 2012

DOI: 10.4236/ojce.2012.23015 12,068 Downloads 22,596 Views Citations
Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis (Articles)

Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar

J. of Minerals and Materials Characterization and Eng. Vol.11 No.11，November 30, 2012

DOI: 10.4236/jmmce.2012.1111115 6,549 Downloads 10,846 Views Citations
Evaluation and Optimization of Tensile Strength Responses of Coir Fibres Reinforced Polyester Matrix Composites (CFRP) Using Taguchi Robust Design (Articles)

Ugochukwu Chuka Okonkwo, Christian Ebele Chukwunyelu, Bright Uchenna Oweziem, Okunzuwa Austine Ekuase

J. of Minerals and Materials Characterization and Eng. Vol.3 No.4，June 4, 2015

DOI: 10.4236/jmmce.2015.34025 3,304 Downloads 4,542 Views Citations
Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method (Articles)

Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah

J. of Minerals and Materials Characterization and Eng. Vol.3 No.4，June 10, 2015

DOI: 10.4236/jmmce.2015.34028 2,723 Downloads 3,656 Views Citations
Cymbal Structural Optimization for Improving Piezoelectric Harvesting Efficiency with Taguchi’s Orthogonal Experiment (Articles)

Guangqing Shang, Wei Ning, Chunhua Sun

Journal of Power and Energy Engineering Vol.3 No.10，October 29, 2015

DOI: 10.4236/jpee.2015.310002 3,647 Downloads 4,526 Views Citations
Experimental Investigation and Process Optimization of Biodiesel Production from Kusum Oil Using Taguchi Method (Articles)

Rabiranjan Murmu, Harekrushna Sutar, Sangram Patra

Advances in Chemical Engineering and Science Vol.7 No.4，October 31, 2017

DOI: 10.4236/aces.2017.74033 1,814 Downloads 4,423 Views Citations
Recognition Method of Multidimensional Poverty Based on Mahalanobis-Taguchi System (Articles)

Wenhe Chen, Zhipeng Chang

Open Journal of Social Sciences Vol.7 No.8，August 20, 2019

DOI: 10.4236/jss.2019.78012 597 Downloads 1,330 Views Citations
Optimization of Wear Factors of Aluminium Hybrid Metal Matrix Composites Using Taguchi Method (Articles)

P. B. Asha, Sneha Sarika Murthy, C. R. Prakash Rao, V. Ravi Kumar, R. Kiran, C. N. Suresha

J. of Minerals and Materials Characterization and Eng. Vol.9 No.1，January 14, 2021

DOI: 10.4236/jmmce.2021.91003 675 Downloads 2,394 Views Citations
What can Software Engineers Learn from Manufacturing to Improve Software Process and Product? (Articles)

Norman SCHNEIDEWIND

Intelligent Information Management Vol.1 No.2，November 30, 2009

DOI: 10.4236/iim.2009.12015 5,418 Downloads 9,556 Views Citations
Simultaneous Optimization of Correlated Multiple Surface Quality Characteristics of Mild Steel Turned Product (Articles)

Saurav DATTA, Siba Sankar MAHAPATRA

Intelligent Information Management Vol.2 No.1，January 27, 2010

DOI: 10.4236/iim.2010.21004 6,306 Downloads 11,438 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies