Deep Drawing Cylindrical Cup; Sheet Metal Forming; Analytical Analysis - Articles

Theoretical and Experimental Analysis of Deep Drawing Cylindrical Cup (Articles)

Najmeddin Arab, Abotaleb Javadimanesh

J. of Minerals and Materials Characterization and Eng. Vol.1 No.6，November 26, 2013

DOI: 10.4236/jmmce.2013.16051 6,005 Downloads 10,422 Views Citations
Modifying the Traditional Analyzing Method of Cylindrical Workpieces’ Deep Drawing Process by Using a Novel Loop Material Theory Method (Articles)

Rongxin Yang, Zhengwu Lin

Engineering Vol.9 No.4，April 28, 2017

DOI: 10.4236/eng.2017.94019 1,385 Downloads 2,007 Views Citations
Determination of the Friction Coefficient in the Flat Strip Drawing Test (Articles)

Anvar Makhkamov

Engineering Vol.13 No.11，November 29, 2021

DOI: 10.4236/eng.2021.1311043 252 Downloads 1,454 Views Citations
The Effect of Unloading Positions and Times on Sheet Metal’s Stress-Strain Curve (Articles)

Kunmin Zhao, Wumei Fang, Baotang Wang, Daxin Ren

J. of Minerals and Materials Characterization and Eng. Vol.6 No.3，May 22, 2018

DOI: 10.4236/jmmce.2018.63029 892 Downloads 2,823 Views Citations
Evaluation of Contact Pressure in Bending under Tension Test by a Pressure Sensitive Film (Articles)

Luis Fernando Folle, Lirio Schaeffer

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.4，October 28, 2016

DOI: 10.4236/jsemat.2016.64018 1,801 Downloads 3,010 Views Citations
Automobile Roof Panel Forming: Prediction and Compensation of Springback and Application of Numerical Simulation Based on Dynaform (Articles)

Amsalu K. Addis

World Journal of Engineering and Technology Vol.6 No.4，November 30, 2018

DOI: 10.4236/wjet.2018.64061 1,693 Downloads 3,626 Views Citations
The Effect of Microstructural and Geometric Inhomogeneities Induced by Laser for Forming Strain Analysis on Sheet Metal Formability (Articles)

Sergey Guk, Daria Plotnikova, Rudolf Kawalla

Materials Sciences and Applications Vol.7 No.5，May 20, 2016

DOI: 10.4236/msa.2016.75025 2,329 Downloads 3,343 Views Citations
Analytic Solution for Fluid Flow over an Exponentially Stretching Porous Sheet with Surface Heat Flux in Porous Medium by Means of Homotopy Analysis Method (Articles)

Azhar Ali, H. Zaman, M. Z. Abidin, S. I. A. Shah

American Journal of Computational Mathematics Vol.5 No.2，June 30, 2015

DOI: 10.4236/ajcm.2015.52019 4,079 Downloads 5,703 Views Citations
Investigation of Hot Formability of AZ61 Mg Alloy (Articles)

Maziar Ramezani, Thomas Neitzert

Modern Mechanical Engineering Vol.5 No.2，April 24, 2015

DOI: 10.4236/mme.2015.52003 4,222 Downloads 5,370 Views Citations
New Methods Testing of Adhesion of the Coating to Sheet Metal by Bending (Articles)

Milan Dvořák, Emil Schwarzer

J. of Surface Engineered Materials and Advanced Technology Vol.2 No.2，April 5, 2012

DOI: 10.4236/jsemat.2012.22011 7,230 Downloads 12,203 Views Citations
Parallel Deformation of the Metals (Articles)

Chetan Nikhare

Modeling and Numerical Simulation of Material Science Vol.3 No.3，July 1, 2013

DOI: 10.4236/mnsms.2013.33010 3,193 Downloads 5,064 Views Citations
Effect of Draw Ratio and Sheet Thickness on Earing and Drawability of Al 1200 Cups (Articles)

O.O. Oluwole, C.O. Anyaeche, O.V. Faola

J. of Minerals and Materials Characterization and Eng. Vol.9 No.5，May 20, 2010

DOI: 10.4236/jmmce.2010.95032 6,549 Downloads 8,477 Views Citations
Artistic Drawing and Thought Expression: CAFA Drawing Retrospective 2009-2015 (Articles)

Bokumoni Akonga Jonas Theoodore

Art and Design Review Vol.11 No.2，May 30, 2023

DOI: 10.4236/adr.2023.112010 366 Downloads 3,258 Views Citations
Finite Element Modeling of Stamp Forming Process on Fiber Metal Laminates (Articles)

Xiaocen Dou, Sivakumar Dhar Malingam, Jae Nam, Shankar Kalyanasundaram

World Journal of Engineering and Technology Vol.3 No.3C，October 23, 2015

DOI: 10.4236/wjet.2015.33C036 4,060 Downloads 5,037 Views Citations
Finite Element Modeling of Stamp Forming Process on Thermoplastic-Based Fiber Metal Laminates at Elevated Temperatures (Articles)

Xiaocen Dou, Sivakumar Dhar Malingam, Jae Nam, Shankar Kalyanasundaram

World Journal of Engineering and Technology Vol.3 No.3C，October 23, 2015

DOI: 10.4236/wjet.2015.33C037 3,932 Downloads 4,893 Views Citations
Parametric Study of Dynamic Wrinkling in a Thin Sheet on Elastic Foundation (Articles)

M. N. Hamdan, A. A. Al-Qaisia, S. Abdallah

Int'l J. of Modern Nonlinear Theory and Application Vol.1 No.3，September 28, 2012

DOI: 10.4236/ijmnta.2012.13008 5,581 Downloads 9,651 Views Citations
Strain Capacities Limits of Wrought Magnesium Alloys: Tension vs. Expansion (Articles)

R. Boissiere, P. Vacher, J. J. Blandin, A. Khelil

Materials Sciences and Applications Vol.4 No.12，December 6, 2013

DOI: 10.4236/msa.2013.412097 3,613 Downloads 5,153 Views Citations
An Inverse Analysis of the Erichsen Test Applied for the Automatic Identification of Sheet Materials Behavior (Articles)

Adinel Gavrus, Mihaela Banu, Eric Ragneau, Catalina Maier

Engineering Vol.2 No.7，July 23, 2010

DOI: 10.4236/eng.2010.27062 6,387 Downloads 10,964 Views Citations
When the Silence Speaks: The Smile (Articles)

Maria do Rosário Dias, Letícia Garcia Naben, Ana Lúcia Monteiro, Ana Ferreira, Valter Pedroso Alves, Ana Delgado

Journal of Biosciences and Medicines Vol.6 No.11，November 16, 2018

DOI: 10.4236/jbm.2018.611002 879 Downloads 1,846 Views Citations
Analytical Monitoring of the Chemicals Present in the Discharge Water Generated by the Surface Treatment Industry (Articles)

Nadia Morin-Crini, Coline Druart, Sophie Gavoille, Céline Lagarrigue, Grégorio Crini

Journal of Environmental Protection Vol.4 No.7A，July 11, 2013

DOI: 10.4236/jep.2013.47A007 3,328 Downloads 4,986 Views Citations
This article belongs to the Special Issue on Water Pollution and Water Quality

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies