Milling - Articles - Scientific Research Publishing

Mechanochemical Synthesis and Characterization of Molybdenum Dioxide-Hematite Nanostructures with Different Molarities (Articles)

Matthew Knauss, Felicia Tolea, Mihaela Valeanu, Lucian Diamandescu, Richard Trotta, Kelly Wood, Agnieszka Grabias, Monica Sorescu

J. of Minerals and Materials Characterization and Eng. Vol.6 No.6，November 21, 2018

DOI: 10.4236/jmmce.2018.66042 821 Downloads 1,491 Views Citations
Nanoindentation Study of Al356-Al2O3 Nanocomposite Prepared by Ball Milling (Articles)

Y. Mazaheri, F. Karimzadeh, M. H. Enayati

Materials Sciences and Applications Vol.1 No.4，October 29, 2010

DOI: 10.4236/msa.2010.14034 7,378 Downloads 14,368 Views Citations
Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling (Articles)

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210097 8,015 Downloads 15,461 Views Citations
The effect of milling on proteins in model Queso Fresco cheeses (Articles)

Moushumi Paul, Alberto Nuñez, Diane Van Hekken

Advances in Bioscience and Biotechnology Vol.3 No.1，February 13, 2012

DOI: 10.4236/abb.2012.31001 6,230 Downloads 10,732 Views Citations
Analysis of Low Amylose and Processability Fractured Endosperms Derived from Somatic Variation (Articles)

Gihwan Yi, Kyung Min Kim

Food and Nutrition Sciences Vol.4 No.6A，June 14, 2013

DOI: 10.4236/fns.2013.46A003 4,149 Downloads 5,977 Views Citations
This article belongs to the Special Issue on Advanced Research in Genetically Modified Foods (GMF)
Effect of Synthesis Routes on Microstructure of Nanocrystalline Cerium Oxide Powder (Articles)

Ashutosh Sharma

Materials Sciences and Applications Vol.4 No.9，September 3, 2013

DOI: 10.4236/msa.2013.49061 6,175 Downloads 8,647 Views Citations
Nano-Patterning of Diffraction Gratings on Human Hair for Cosmetic Purposes (Articles)

Khawar Abbas, Drew F. Goettler, Bruce C. Lamartine, Zayd C. Leseman

J. of Cosmetics, Dermatological Sciences and Applications Vol.4 No.3，May 29, 2014

DOI: 10.4236/jcdsa.2014.43024 6,922 Downloads 11,181 Views Citations
Investigation of Fundamental Mechanism of Crushing of Clods in a Rod Mill (Articles)

Masayuki Oishi, Yoshihiro Kubota, Osamu Mochizuki

Engineering Vol.11 No.10，October 10, 2019

DOI: 10.4236/eng.2019.1110045 528 Downloads 1,387 Views Citations
Machine Design Approach to Bone Waste Utilization in Slaughterhouses of Developing Countries with Focus on Nigeria (Articles)

Ayodele James Oyejide, Sunday Olufemi Adetola, Augustine Lawal

World Journal of Engineering and Technology Vol.10 No.2，May 31, 2022

DOI: 10.4236/wjet.2022.102026 289 Downloads 1,913 Views Citations
Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant (Articles)

Jeong-Du Kim, Keon-Beom Lee

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210101 6,252 Downloads 10,690 Views Citations
Ball Milling and Annealing of Co-50 at% W Powders (Articles)

A. S. Bolokang, M. J. Phasha, D. E. Motaung

International Journal of Nonferrous Metallurgy Vol.2 No.2，April 22, 2013

DOI: 10.4236/ijnm.2013.22006 3,571 Downloads 7,267 Views Citations
Energy and Cost Analysis of Cement Production Using the Wet and Dry Processes in Nigeria (Articles)

Olayinka S. Ohunakin, Oluwafemi R. Leramo, Olatunde A. Abidakun, Moradeyo K. Odunfa, Oluwafemi B. Bafuwa

Energy and Power Engineering Vol.5 No.9，November 20, 2013

DOI: 10.4236/epe.2013.59059 12,307 Downloads 17,133 Views Citations
Synthesis of Tantalum Hydride Using Mechanical Milling and Its Characterization by XRD, SEM, and TGA (Articles)

José Luis Iturbe-García, Beatriz Eugenia López-Muñoz

Advances in Nanoparticles Vol.3 No.4，November 13, 2014

DOI: 10.4236/anp.2014.34020 5,875 Downloads 7,262 Views Citations
Dye-Sensitized Solar Cells Based on TiO₂ Nanoparticles Modified by Wet Milling (Articles)

Anthony Huamán, Maria Quintana, Juan Rodriguez, Walter Estrada

Energy and Power Engineering Vol.6 No.13，November 21, 2014

DOI: 10.4236/epe.2014.613040 3,212 Downloads 4,348 Views Citations
Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method (Articles)

Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah

J. of Minerals and Materials Characterization and Eng. Vol.3 No.4，June 10, 2015

DOI: 10.4236/jmmce.2015.34028 2,723 Downloads 3,656 Views Citations
Pilot Scale Mill Characterization and Evaluation of Rice Bran Oil Concentration of Jazzman Rice (Articles)

Rebecca Schramm, Grant Gonzalez, Nicole Walker, Marybeth Lima

American Journal of Plant Sciences Vol.6 No.12，August 6, 2015

DOI: 10.4236/ajps.2015.612189 3,070 Downloads 4,171 Views Citations
This article belongs to the Special Issue on Rice
Passive Remediation of Acid Mine Drainage Using Ball-Milling Modified Indonesian Natural Bentonite: Laboratory Batch and Column Sorption of Manganese (Articles)

Widyawanto Prastistho, Winarto Kurniawan, Hirofumi Hinode

Green and Sustainable Chemistry Vol.8 No.4，October 10, 2018

DOI: 10.4236/gsc.2018.84020 724 Downloads 1,538 Views Citations
Simulation Analysis of Surface Roughness for Milling Process (Articles)

Bai Liu, Jixuan Yuan, Zhenjiu Zhang

Natural Science Vol.11 No.5，May 9, 2019

DOI: 10.4236/ns.2019.115014 1,067 Downloads 2,372 Views Citations
Investigation of the Fragmentation Process of Clods in a Rod Mill Developed for Research Use (Articles)

Masayuki Oishi, Yoshihiro Kubota, Osamu Mochizuki

World Journal of Mechanics Vol.9 No.10，October 10, 2019

DOI: 10.4236/wjm.2019.910015 511 Downloads 1,306 Views Citations
An Experimental Comparative Analysis of Twist Drilling, Helical Milling and Pilot Hole Machining for Large Diameters in CFRPs (Articles)

Abubakar Yakubu Haruna, Gong Dong Wang

Open Access Library Journal Vol.8 No.3，March 25, 2021

DOI: 10.4236/oalib.1107205 535 Downloads 1,381 Views Citations

<12 >

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies