Wind Energy Research Laboratory, University of Quebec, Rimouski, Canada - Articles

Biomass Cogeneration Technologies: A Review (Articles)

Theleli Abbas, Mohamad Issa, Adrian Ilinca

Journal of Sustainable Bioenergy Systems Vol.10 No.1，January 15, 2020

DOI: 10.4236/jsbs.2020.101001 1,888 Downloads 9,949 Views Citations
Biomass Combined Heat and Power Generation for Anticosti Island: A Case Study (Articles)

Theleli Abbas, Mohamad Issa, Adrian Ilinca, Ali El-Ali

Journal of Power and Energy Engineering Vol.8 No.3，March 31, 2020

DOI: 10.4236/jpee.2020.83005 1,001 Downloads 2,995 Views Citations
A Review and Comparison on Recent Optimization Methodologies for Diesel Engines and Diesel Power Generators (Articles)

Mohamad Issa, Hussein Ibrahim, Richard Lepage, Adrian Ilinca

Journal of Power and Energy Engineering Vol.7 No.6，June 26, 2019

DOI: 10.4236/jpee.2019.76003 3,382 Downloads 7,321 Views Citations
Performance Optimization of Diesel Generators Using Permanent Magnet Synchronous Generator with Rotating Stator (Articles)

Mohammadjavad Mobarra, Mohamad Issa, Miloud Rezkallah, Adrian Ilinca

Energy and Power Engineering Vol.11 No.7，July 31, 2019

DOI: 10.4236/epe.2019.117017 1,481 Downloads 6,496 Views Citations
Experimental Investigation of Laser Welding Process in Butt-Joint Configurations (Articles)

Laurent Jacques, Abderrazak El Ouafi

World Journal of Engineering and Technology Vol.5 No.1，February 22, 2017

DOI: 10.4236/wjet.2017.51007 2,240 Downloads 4,476 Views Citations
This article belongs to the Special Issue on Welding and Cutting Technology
Prediction of Weld Joint Shape and Dimensions in Laser Welding Using a 3D Modeling and Experimental Validation (Articles)

Laurent Jacques, Abderrazak El Ouafi

Materials Sciences and Applications Vol.8 No.11，October 12, 2017

DOI: 10.4236/msa.2017.811055 1,685 Downloads 4,011 Views Citations
ANN Based Predictive Modelling of Weld Shape and Dimensions in Laser Welding of Galvanized Steel in Butt Joint Configurations (Articles)

Laurent Jacques, Abderrazak El Ouafi

J. of Minerals and Materials Characterization and Eng. Vol.6 No.3，May 10, 2018

DOI: 10.4236/jmmce.2018.63022 949 Downloads 1,963 Views Citations
Experimental Investigation of Laser Welding Process in Overlap Joint Configuration (Articles)

Kamel Oussaid, Abderrazak El Ouafi, Ahmed Chebak

Journal of Materials Science and Chemical Engineering Vol.7 No.3，March 27, 2019

DOI: 10.4236/msce.2019.73002 1,257 Downloads 3,169 Views Citations
Mechanics of Twisted DNA Molecule Adsorbed on a Biological Membrane (Articles)

Radouane El Kinani, Hamid Kaidi, Noureddine Barka

Open Journal of Biophysics Vol.10 No.3，July 8, 2020

DOI: 10.4236/ojbiphy.2020.103011 472 Downloads 1,305 Views Citations
Effects of Laser Hardening Process Parameters on Case Depth of 4340 Steel Cylindrical Specimen—A Statistical Analysis (Articles)

Noureddine Barka, Abderrazak El Ouafi

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.3，June 10, 2015

DOI: 10.4236/jsemat.2015.53014 5,083 Downloads 7,061 Views Citations
ANN Based Model for Estimation of Transformation Hardening of AISI 4340 Steel Plate Heat-Treated by Laser (Articles)

Guillaume Billaud, Abderazzak El Ouafi, Noureddine Barka

Materials Sciences and Applications Vol.6 No.11，November 18, 2015

DOI: 10.4236/msa.2015.611098 3,312 Downloads 4,287 Views Citations
Study of Frequency Effects on Hardness Profile of Spline Shaft Heat-Treated by Induction (Articles)

Habib Hammi, Abderazzak El Ouafi, Noureddine Barka

Journal of Materials Science and Chemical Engineering Vol.4 No.3，March 9, 2016

DOI: 10.4236/msce.2016.43001 2,492 Downloads 3,982 Views Citations
A Predictive Modeling Based on Regression and Artificial Neural Network Analysis of Laser Transformation Hardening for Cylindrical Steel Workpieces (Articles)

Ahmed Ghazi Jerniti, Abderazzak El Ouafi, Noureddine Barka

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.4，October 12, 2016

DOI: 10.4236/jsemat.2016.64014 1,582 Downloads 2,636 Views Citations
Artificial Neural Networks Based Integrated Predictive Modelling of Quality Characteristics in CNC Turning of Cantilever Bars (Articles)

D. M. Davakan, A. El Ouafi

World Journal of Mechanics Vol.7 No.5，May 26, 2017

DOI: 10.4236/wjm.2017.75013 1,478 Downloads 2,585 Views Citations
Scanning Based Induction Heating for AISI 4340 Steel Spline Shafts-3D Simulation and Experimental Validation (Articles)

Habib Hammi, Abderrazak El Ouafi, Noureddine Barka, Ahmed Chebak

Advances in Materials Physics and Chemistry Vol.7 No.6，June 20, 2017

DOI: 10.4236/ampc.2017.76021 1,602 Downloads 3,032 Views Citations
This article belongs to the Special Issue on Phase Equilibrium and Transformation
A Three-Dimensional Numerical Model for Predicting the Weld Bead Geometry Characteristics in Laser Overlap Welding of Low Carbon Galvanized Steel (Articles)

Kamel Oussaid, Abderrazak El Ouafi

Journal of Applied Mathematics and Physics Vol.7 No.10，October 8, 2019

DOI: 10.4236/jamp.2019.710149 1,026 Downloads 2,788 Views Citations
This article belongs to the Special Issue on Application of Mathematical Models in Physics and Engineering
A Study on Prediction of Weld Geometry in Laser Overlap Welding of Low Carbon Galvanized Steel Using ANN-Based Models (Articles)

Kamel Oussaid, Abderazak El Ouafi

Journal of Software Engineering and Applications Vol.12 No.12，December 23, 2019

DOI: 10.4236/jsea.2019.1212031 770 Downloads 1,771 Views Citations
Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Modeling and Numerical Simulation of Material Science Vol.10 No.3，July 17, 2020

DOI: 10.4236/mnsms.2020.103003 603 Downloads 1,524 Views Citations
Complementary Approaches, Stress Management Practices for Future Physicians, a Way to Cultivate a “Savoir-Être” and Contribute to Becoming a Better Physician? (Articles)

Josée Lachance

Creative Education Vol.14 No.1，January 20, 2023

DOI: 10.4236/ce.2023.141006 145 Downloads 741 Views Citations
This article belongs to the Special Issue on Medical Education and Health Education
Single Track Laser Surface Hardening Model for AISI 4340 Steel Using the Finite Element Method (Articles)

Ahmed Ghazi Jerniti, Abderazzak El Ouafi, Noureddine Barka

Modeling and Numerical Simulation of Material Science Vol.6 No.2，April 8, 2016

DOI: 10.4236/mnsms.2016.62003 3,105 Downloads 5,521 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies