R. Z. Valieva, N. A. Enikeeva, M. Yu. Murashkina, V. U. Kazykhanova and X. Sauvage, “On the Origin of the Extremely High Strength of Ultrafine-Grained Al Alloys Produced by Severe Plastic Deformation,” Scripta Materialia, Vol. 63, No. 9, 2010, pp. 949-952. doi:10.1016/j.scriptamat.2010.07.014

has been cited by the following article:

• TITLE: Finite Element Study on the Development of Damage and Flow Characteristics in Al7075 Alloy during Ex-ECAP

  AUTHORS: Mehdi Shaban Ghazani, Beitallah Eghbali

  KEYWORDS: Finite Element Method; Extrusion; Equal Channel Angular Pressing; Al7075

  JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.3 No.1, January 21, 2013

  ABSTRACT: In the present study, 3D-finite element method was conducted to investigate the deformation characteristics of Al7075 alloy during integrated extrusion-equal channel angular pressing. Effective strain, strain rate, mean stress, and damage distributions were evaluated. Severe cracking was observed at Al7075 sample after extrusion-equal channel angular pressing. Finite element results show that cracking is due to the positive mean stress and damage accumulation at the top surface of sample.