Trinh T.K. and Kang L.S.2010. Application of response surface method as an experimental design to optimize coagulation test. Environmental Engineering Research,15(2),063-070.

has been cited by the following article:

• TITLE: Optimal Evaluation of Coag-Flocculation Factors for Alum-Brewery Effluent System by Response Surface Methodology

  AUTHORS: M.C. Menkiti, M.C. Aneke, E.B. Ogbuene, O.D. Onukwuli, E.O. Ekumankama

  KEYWORDS: Coag-flocculation, Brewery effluent, Alum, Response surface methodology, Central composite design

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.5, May 18, 2012

  ABSTRACT: This work investigates coag-flocculation optimization treatment of alum-brewery effluent system via response surface methodology (RSM). To minimize suspended and dissolved particles (SDP), experiments were carried out using nephelometric jar test and 23-factorial design with three star-points, six-center-points and two replications. A central composite design, which is the standard design of RSM, was used to evaluate the effects and interactions of three major factors (coagulation pH, coagulant dosage, settling time) on the treatment efficiency. Multivariable quadratic model developed for the response studied indicates the optimum conditions to be 9, 500mg/l and 20minutes for coagulation pH, coagulant dosage and settling time, respectively. At optimum, the SDP was reduced from 10831.490mg/l to 801.451mg/l, representing 92.601% removal efficiency. RSM has demonstrated to be appropriate approach for the optimization of the coag-flocculation process by statistical evaluation.