V. Saxena, S. Choudhary, S. C. Gadkari, S. K. Gupta and J. V. Yakhmi, “Room Temperature Operated Ammonia Gas Sensor Using Polycarbazole Langumuir-Blodgett Film,” Sensors and Actuators B, Vol. 107, No. 1, 2005, pp. 277-282. doi:10.1016/j.snb.2004.10.011

has been cited by the following article:

• TITLE: Synthesis of Polypyrrole Using Ammonium Peroxy Disulfate (APS) as Oxidant Together with Some Dopants for Use in Gas Sensors

  AUTHORS: Hemant K. Chitte, Narendra V. Bhat, Mr. Ajit V. Gore, Ganesh N. Shind

  KEYWORDS: Polypyrrole, Structure, Doping, Gas Sensor, Ammonia

  JOURNAL NAME: Materials Sciences and Applications, Vol.2 No.10, October 18, 2011

  ABSTRACT: Polypyrrole (Ppy) was synthesized using Ammonium Peroxy Disulfate (APS) as oxidant in a standard ratio of monomer to oxidants at 5℃. Attempts were made to increase the electrical conductivity by using various dopants viz. Lithium per Chlorate (LiClO4), para-Toluene Sulfonate (p-TS) and Napthalene Sulfonic acid (NSA). The materials were characterized using FTIR, X Ray diffraction and SEM. The electrical conductivity was measured by two probe method and was found to be in the range of 10-3 S/cm. Thin films of these preparations were casted on the interdigited electrodes to study the detection of gas such as ammonia. It was found that for the pure Ppy when ammonia gas was allowed to flow in, there was a sudden increase in the current, which decreased rapidly when gas was stopped. However when Ppy doped with p-TS, NSA and LiClO4, the trend was reversed.