Bautista, Y., Goacute;mez, M.P., Ribes, C. and Sanz, V. (2011) Relation between the Scratch Resistance and the Chemical Structure of Organic-Inorganic Hybrid Coatings. Progress in Organic Coatings, 70, 358-364.
http://dx.doi.org/10.1016/j.porgcoat.2010.09.033

has been cited by the following article:

• TITLE: Analysis on the Durability of Hybrid Polymer Composites for Power FGD System

  AUTHORS: Zhenyu Wang, Lijie Xiu, Enhou Han, Yunhe Zhang, Yongan Zhao, Ming Liu

  KEYWORDS: Coal-Fired Power Plant, Flue Gas Desulfurization, Hybrid Polymer Composite, Durability, Corrosion Resistance

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.4 No.3, March 11, 2016

  ABSTRACT: The corrosion condition of flue gas desulfurization (FGD) equipment for the coal-fired power plant was defined as the strong corrosion grade. The lining system of hybrid polymer composite was used in internal cylinder of steel chimney, and a corrosion-resistant and heat-resistant protective layer was formed on the metal surface. The corrosion-resistant and ageing-resistant properties of hybrid polymer composite prepared at low temperature after four years of practical use were investigated by differential scanning calorimeter (DSC), scanning electron microscopy (SEM) and measurement of gravimetric variation, contact angle, abrasion resistance, bonding strength and tensile strength. The properties of hybrid polymer composites prepared at 25℃ and –15℃ were comparatively analyzed in the paper.