SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.

 

Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
   
Paper Publishing WeChat
Book Publishing WeChat
(or Email:book@scirp.org)

Article citations

More>>

A. Lahrech, R. Bachelot, P. Gleyzes and A. C. Boccara, “Infrared Reflection-Mode Near-Field Microscopy Using an Apertureless Probe with a Resolution of λ/600,” Optics Letters, Vol. 21, No. 17, 1996, pp. 1315-1317. doi:10.1364/OL.21.001315

has been cited by the following article:

  • TITLE: Scanning Head for the Apertureless near Field Optical Microscope

    AUTHORS: D. V. Kazantsev, H. Ryssel

    KEYWORDS: Near-Field Optics; Apertureless SNOM; Scanning Head

    JOURNAL NAME: Modern Instrumentation, Vol.2 No.2, April 30, 2013

    ABSTRACT: The design and characterization of a tip control unit for an apertureless scanning near field optical microscope (ASNOM) is reported. To make the instrument operation easier, the cantilever control parts (piezo excitation of the cantilever vibration for the dynamic mode feedback and the parts necessary for the optical lever scheme of the vibration control) were placed in a separate detachable assembly. To suppress the influence of vibrations of the setup, the assembly was made lightweight. Good optical access to the ASNOM tip from various directions is provided in the system. High long-term mechanical stability of the system (~50 nm lateral drift in 18 hours) as well as low sensitivity to seismic vibrations (~400 pm RMS) is demonstrated. It is shown that external sound is not a main source of noise in the topography image (~200 pm RMS). The light field distribution (with its amplitude and phase) around the ASNOM tip was acquired by scanning the focal spot around the tip, and a high optical quality of the system is demonstrated.