W. G. Lee, S. I. Woo, J. C. Kim, S. H. Choi and K. H. Oh, “Preparation and Properties of Amorphous TiO₂ Thin Films by Plasma Enhanced Chemical Vapor Deposition,” Thin Solid Films, Vol. 237, No. 1-2, 1994, pp. 105-111. doi:10.1016/0040-6090(94)90245-3

has been cited by the following article:

• TITLE: Plasma-Assisted Chemical Vapor Deposition of TiO2 Thin Films for Highly Hydrophilic Performance

  AUTHORS: Satoshi Yamauchi, Yoh Imai

  KEYWORDS: PCVD; Titanium-Oxide Films; Anatase-TiO2; Hydrophilicity

  JOURNAL NAME: Crystal Structure Theory and Applications, Vol.2 No.1, March 29, 2013

  ABSTRACT: Titanium-oxide layer was grown on glass substrate by plasma-assisted chemical vapor deposition (PCVD) using oxygen gas plasma excited by radio-frequency power at 13.56 MHz in the pressure as low as 3mtorr at relatively low temperature below 400oC, and studied on the crystallographic properties with the hydrophilic behavior comparing to the layer deposited by low-pressure chemical vapor deposition (LPCVD). Raman spectra indicated anatase-phase TiO2 layer without amorphous-phase could be formed above 340oC by simultaneous supply of plasma-cracked and non-cracked titanium-tetra-iso-propoxide (TTIP) used as preliminary precursor. Surface Scanning Electron Microscope images indicated the PCVD-layer consists of distinct nanometer-size plate-like columnar grains, in contrast to rugged micrometer-size grains in the LPCVD-layer. Extremely small water contact angle about 5o in dark and the quick conversion to super-hydrophilicity by UV-irradiation with a light-power density as low as 50 W/cm2 were observed on the PCVD- layer grown at 380oC, while the large initial contact angle was above 40o and the response for the UV-irradiation was gradual on the LPCVD-layer.