References

• • M. Molnarova, I. mamuzi , J. Bacso, , M. Fujda, P. Kodronova, T. Kuskuli, I. Pokorny,...
• • Masami Wakita and Takanori Kuno and Ayamitsu Amano, Akihiko Nemoto and Katsushi Saru...
• • Y. Sahin, “Optimal testing parameters on the wear behavior of various steels”, Materi...
• • Yoshifumi Amamoto, Hozumi Goto “Friction and wear of carbon steel near T1-transition ...
• • Y. Totik, R. Sadeler, H. Altun, M. Gavgali, “The effects of induction hardening on we...
• • Mare Meyers and Krishan chawla, “Mechanical behavior of materials (Second edition)”
• • S. Basavarajappa, K.V. Arun, J. Paulo Davim, “Effect of Filler Materials on Dry Slidi...
• • Ross, P.J. Taguchi Techniques for Quality Engineering, McGraw–Hill Publishing Compan...
• • N.E.W. Hartley, J.K. Hirvonen ,”Wear testing under high load conditions, The effect o...
• • K. Vinod Wadhawan, Introduction to Ferroic Materials, Gordon & Breach Publishers, Lo...
• • O. Auciello, J.F. Scott, R. Ramesh, Phys. Today .51 (1998) 22.
• • J. Dolinsek, D. Arcon, Hae Jin Kim, J. Seliger, V. Zagar, P. Vanek, J. Kroupa, Z. Zik...
• • Sachio Horiuchi, Reiji Kumai, Yoshinori Tokura, J. Am. Chem. Soc. 127 (2005) 5010
• • Gergs MK, Egypt J Solids .29, (2006) 371–82.
• • Patil MG, Mahajan VC, Ghatage AK, Patil SA, Indian J Pure Appl Phys .34, (1996)166–71...
• • Lal B, Khosa SK, Tickoo R, Bamzai KK, Kotru PN, Mater Chem Phys. 83, (2004) 158–68.
• • Ramana Reddy AV, Ranga Mohan G, Ravinder D, Boyanov BS, J Mater Sci.34, (1999) 3169–7...
• • Parkash C, Bajal JS, J Less-Common Met .107, (1985) 51–7.
• • Ravinder D, Phys Status Solidi (a) .139, (1993) K69–72.
• • C.Sakaki et al., JpnJ.Appl.Phys.40, (2001)6901
• • S. Selvakumar et.al., J. Mater. Chem. and Phy. 103 (2007a)153.
• • M. Narayan Bhat, and S.M. Dharmaprakash, J. Crystal Growth. 236 (2002a) 376.
• • P.G. Jonson, and A.K. Vick, Acta Crystallogr. B27 (1972) 2237.
• • L.F. Ower, and K.E. Turner Moore, Acta Crystallogr. B32 (1976) 11.
• • G. Albrecht, and R.B. Corey, J. Am. Chem. Soc. 61 (1939)1087.
• • E. Fischer, and Ber. Dtsch, Chem. Ges. 38 (1905) 2917.
• • Y. Iitaka, Acta Crystallogr. 11 (1958) 225.
• • M. Esthagu Peter,and P. Ramasamy, Spectrochim. Acta Part A. 75 (2010) 1417.
• • E. Ramachandran, K. Baskaran, and S. Natarajan, Cryst. Res. Technolgy. 42 (2007b) 73...
• • K. Srinivasan, and J. Arumugam, Opt. Mater. 30 (2007c) 40.
• • P.V. Dhanaraj, and N.P. Rajesh, Mater. Chem. and Phys. 15 (2009) 413.
• • M. Narayan Bhat, and S.M. Dharmaprakash, J. Cryst. Growth 236 (2002b) 376.
• • M. Narayan Bhat, and S.M. Dharmaprakash, J. Cryst. Growth 242 (2002c) 245.
• • N. Vijayan et.al., W.T.A. Harrison, J. Crystal Growth 262 (2004) 490.
• • S.K. Kurtz and T.T. Perry, J. Appl. Phys. 39 (1968) 3798.
• • Murthy, N. N, (1996) Engineering materials. Dhanpat Publications, New Delhi. India
• • Wikepedia(2007) ‘Concrete’ en.wikipedia.org/wiki/Concrete(Assessed 2010)
• • American concrete Institute(1963) ‘Admixtures for concrete’Journal of ACI Proceedings...
• • Hope,B and Brian.B(1981) “Autoclaved Concrete Containing Fly Ash”, cement and Concre...
• • Valore, R.C.Jr.(2007) “Laboratory Evaluation of Fly Ash and Other Pozzolans for Use i...