References

• • Ma, J.J., Li, G., Chen, G.R., Xu, G.O., and Cai, G.Q., 2001, “Enhanced coagulation of...
• • Diterlizzi, S.D., 1994, Introduction to Coagulation and Flocculation of Waste water, ...
• • Edzwald, J.K.,1987, “Coagulation – sedimentation filtration process for removing orga...
• • O’Meila C.R., 1978, Coagulation in waste water treatment : The scientific basis of f...
• • Jin, Y., 2005, Use of high Resolution Photographic Technique for studying Coagulatio...
• • Ezeagu I E, Metges C.C, Proll .J, Petzke K.J, and Akinsoyinu A.O, 2006, Chemical com...
• • Hunter, R.J., 1993; Introduction to Modern Colloid Science, Oxford University Press, ...
• • Thomas, D.N., Judd, S.J., and Fawcett, N., 1999; “ Flocculation modeling: A review”. ...
• • Swift, D.L., and Friedlander, S.K., 1964, “The coagulation of hydrolysis by Brownian ...
• • Von Smoluchowski, M., 1917; “Versucheiner Mathematischen Theorie der Koagulations Ki...
• • Van Zanten, J.H., and Elimelech M., 1992; “Determination of Rate constants by multi ...
• • Fridkhsberg, D.A., 1984; A course in Colloid Chemistry; Mir Publishers Moscow, Russi...
• • Adebowale, Y.A., and Adebowale, K.A., 2007; “Evaluation of the Gelation characteristi...
• • Water Specialist Technology (WST) 2003; About Coagulation and Flocculation: Informat...
• • AWWA 2005; American Water Works Association;Standard Methods for the Examination of W...
• • Ravina .L, 1993; Everything you need to know about coagulation and flocculation,4th E...
• • Nelkon M.; 1981;Principles of physics 4th Edn .Collins International Textbook Depart...
• • Yates, P., Yan, Y., Jamson, G. J., and Biggs, S., 2001; “Heteroaggregation of particl...
• • Holthof, H., Schmitt, A., Ferńandez-Barbero,M., Borkovec, M., Cabrerizo-Vilehez, P., ...
• • Holthof, H., Egelhaaf, S.U., Borkovec, M., Schurtenberger, P., and Sticher, H., 1996;...
• • Menkiti M.C., Nnaji P.C., Nwoye C.I., Onukwuli O.D, 2010; Coag-flocculation kinetics ...
• • Kempester M.H.A., 1984, Materials for Engineers, 3rd Edition. Hoodder and Stonghton.
• • Raymond A., Higgins B., 1985, Properties of Engineering Materials. Hoodder and Stong...
• • Dell, K.A., 1989, Metallurgy Theory and Practical Textbook. American Technical Societ...
• • John, V.B., 1980, Introduction to Engineering Materials, 2nd Edition. Macmillan Publi...
• • Alawode, A.J., 2002, Effects of Cold Work and Stress Relief Annealing Cycle on the M...
• • Nigerian Society of Engineers (NSE). 2001, Professional Development Board Codes and E...
• • ASM International 1991, ASM Handbook: Heat Treatment, Vol. 4, American Society for Me...
• • ASTM E18. 2008, Standard Test Method for Rockwell Hardness of Metallic Materials, Ame...
• • ASTM E23. 2008, Standard Test Method for Izod Bar Impact Testing of Metallic Materia...
• • ASTM E8. 2008, Standard Test Method for Tension Testing of Metallic Materials, Ameri...
• • Jokhio, M.H., 1991, Effect of Retained Austenite on Abrasive Wear Resistance of Carb...
• • Charkrabarti, A.K. and Das, P.P. 1974. “Kinectics of Second stage graphitization in ...
• • Charkrabarti, A.K. and Das, P.P. 1988, “Tempering Characteristic of Quenched Alloy S...
• • Reed-Hill, R.E., (1973) Physical Metallurgy Principles, 2nd ed., Van Nostrand
• • Makinamuhendisi (2008) ‘Low Carbon steel’ http://www.makinamuhendisi.com / mechanica...
• • Key-to-steel (2008) Hardenable Carbon Steels http://www.key-tosteel. com/ViewArticle...
• • Wikepedia(2008) ‘Carbon Steels’ http://en.wikipedia.org/wiki/Carbon_steel
• • JSTOR SIAM (1999 ) Generating Voronoi Tesselations’ JSTOR SIAM Review, 41( 4), 637-67...
• • Arwade, S. R., 2000, Probabilistic Models for Aluminum Microstructures and Intergran...