[1]
|
W. M. Kays, “Pin-fin Heat-exchanger Surfaces”, Journal of Heat Transfer-Transactions of the ASME, Vol. 77, 1955, pp. 471-483.
|
[2]
|
D. O. Kern and A. D. Kraus, “Extended Surface Heat Transfer”, McGraw-Hill, New York, 1972.
|
[3]
|
A. D. Kraus, A. Aziz, and J. R. Welty, “Extended Surface Heat Transfer”, John Wiley & Sons, Inc. New York, 2001.
|
[4]
|
A. Nuntaphan, T. Kiatsiriroat and C. C. Wang, “Air Side Performance at Low Reynolds Number of Cross-flow Heat Exchanger using Crimped Spiral Fins”, International Communications in Heat and Mass Transfer, Vol. 32, Issue 1-2, 2005, pp. 151-165.
|
[5]
|
X. –Q. Wang and A. S. Mujumdar, “Heat Transfer Characteristics of Nanofluids: A Review”, International Journal of Thermal Sciences, Vol. 46, Issue 1, 2007, pp. 1-19.
|
[6]
|
A. E. Bergles, “Handbook of Heat Transfer-3rd edition”, McGraw-Hill, New York, pp. 11.1-11.76, 1998.
|
[7]
|
D.-K. Yang, K.-S. Lee and S. Song, “Fin Spacing Optimization of a Fin-tube Heat Exchanger Under Frosting Conditions”, International Journal of Heat and Mass transfer, Vol. 49, Issue 15-16, 2006, pp. 2619-2625.
|
[8]
|
N. Sahiti, A. Lemouedda, D. Stojkovic, F. Durst and S. Franz, “Performance Comparison of Pin Fin In-duct Flow Arrays with Various Pin Cross-sections”, Applied Thermal Engineering, Vol. 26, Issue 11-12, 2006, pp. 1176- 1192.
|
[9]
|
M. Almogbel and A. Bejan, “Cylindrical Trees of Pin Fin”, International Journal of Heat and Mass Transfer, Vol. 43, Issue 23, 2000, pp. 4285-4297.
|
[10]
|
M. Almogbel, “Constructal Tree-shaped Fins”, International Journal of Thermal Sciences, Vol. 44, Issue 4, 2005, pp. 342-348.
|
[11]
|
L. Li, W. Cui, Q. Liao, X. Mingdao, T-C. Jen, Q. Chen, “Heat Transfer Augmentation in 3D Internally Finned and Microfinned Helical Tube”, International Journal of Heat and Mass Transfer, Vol. 48, 2005, pp. 1916-1925.
|
[12]
|
S. Kiwan and M. A. Al-Nimr, “Using Porous Fin for Heat Transfer Enhancement”, Journal of Heat Transfer-Transactions of the ASME, Vol. 123, Issue 4, 2001, pp. 617-623.
|
[13]
|
T. K. Aldoss, M. A. Al-Nimr and M. Hader, “Using Capsulated Liquid Metal Fins for Heat Transfer Enhancement”, Journal of Enhanced Heat Transfer, Vol. 11, Issue 2, 2004, pp. 151-160.
|
[14]
|
A.-R. A. Khaled, “Maximizing Heat Transfer Through Joint Fin Systems”, Journal of Heat Transfer-Transactions of The ASME, Vol. 128, 2006, Issue 2, pp. 203-206.
|
[15]
|
A.-R. A. Khaled, “Investigation of Heat Transfer Enhancement Using Permeable Fins, Journal of Heat Transfer-Transactions of ASME, Vol. 132, 2010, Issue 3, Article no. 034503, pp. 1-5.
|
[16]
|
A.-R. A. Khaled, “Heat Transfer Analysis through Solar and Rooted Fins”, Journal of Heat Transfer-Transactions of the ASME, Vol. 130, Issue 8, 2008, Article no. 74503, pp. 1-4..
|
[17]
|
A.-R. A. Khaled, “Thermal Characterizations of Fin-Thin Film Systems”, Journal of Heat Transfer-Transactions of the ASME, Vol. 132, Issue 10, 2010, Article no. 104503, pp. 1-6.
|
[18]
|
J. A. Eastman, S. U. S. Choi, S. Li, W. Yu and L. J. Thompson, “Anomalously Increased Effective Thermal Conductivities of Ethylene Glycol-based Nanofluids Containing Copper Nanoparticles”, Applied Physics Letters, Vol. 78, Issue 6, 2001, pp. 718-720.
|
[19]
|
Y. Xuan and Q. Li, “Investigation on Convective Heat Transfer and Flow Features of Nanofluids”, Journal of Heat Transfer – Transactions of The ASME, Vol. 125, Issue 1, 2003, pp. 151-155.
|
[20]
|
M. Siddique, A.-R. A.Khaled, N. I. Abdulhafiz and A. Y. Boukhary, “Recent Advances in Heat Transfer Enhancements: A Review Report”, International Journal of Chemical Engineering, Vol. 2010, 2010, Article ID 106461, pp.1-28.
|
[21]
|
F. P. Incorpera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine, “Fundamentals of Heat and Mass Transfer-6th Edition”, John Wiley, New York, 2006.
|
[22]
|
M. N. Ozisik, “Heat Conduction-2nd edition”, John Wiley & Sons, Inc., New York, pp. 97-98, 1993.
|
[23]
|
A.-R. A. Khaled and K. Vafai, “Heat Transfer Through Control of Thermal Dispersion Effects”, International Journal of Heat and Mass Transfer, Vol. 48, Issue 11, 2005, pp. 2172-2185.
|