Preparation of Nano-Modified Polyacrylamide and Its Application on Solid-Liquid Separation in Waste Drilling Mud
Fanghui Wang, Jiantao Fan, Hong Zhu, Kefei Han, Jing Zou, Haiyun Sun
DOI: 10.4236/aces.2011.12006   PDF    HTML     5,963 Downloads   12,325 Views   Citations


To satisfy the requirement on solid-liquid separation in high-density waste drilling mud, prepare the nano-modified polyacrylamide(PAM) flocculant for high density waste drilling mud by in-situ dispersion method, direct dispersion method and simultaneous formation method. The result showed the flocculent effect of nano-modified polyacrylamide prepared by simultaneous formation method was the best. When the content of water glass and acrylamide(AM) were respectively 3% and 15% , reaction temperature was 60?C and reaction time was 3h, the performance of product was the best. The water content in filter cake was 24.32% after the waste drilling mud disposed by the optimization flocculant. The flocculent effect of optimization flocculant was superior to that of other flocculant in market.

Share and Cite:

F. Wang, J. Fan, H. Zhu, K. Han, J. Zou and H. Sun, "Preparation of Nano-Modified Polyacrylamide and Its Application on Solid-Liquid Separation in Waste Drilling Mud," Advances in Chemical Engineering and Science, Vol. 1 No. 2, 2011, pp. 33-36. doi: 10.4236/aces.2011.12006.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] M. J. Yang, W. L. Liang, Q. R. Jin, et al., “Study on Comprehensive Treatment Technique about Waste Drilling Mud,” Journal of Mineralogy and Petrology, in Chinese, Vol. 23, 2003, pp. 109-112.
[2] M. Amanullah and L. Yu, “Environment Friendly Fluid Loss Additives to Protect the Marine Environment from the Detrimental Effect of Mud Additives,” Journal of Petroleum Science and Engineering, Vol. 48, No. 3-4, 2005, pp. 199-208. doi:10.1016/j.petrol.2005.06.013
[3] S. Rehan and H. Tahir, “A Fuzzy-Based Methodology for an Aggregative Environmental Risk Assessment: A Case Study of Drilling Waste,” Environmental Modelling & Soft- ware, Vol. 20, No. 1, 2005, pp. 33-46. doi:10.1016/j.envsoft.2003.12.007
[4] C. G. Street and S. E. Guigard, “Treatment of Oil-Based Drilling Waste Using Supercritical Carbon Dioxide,” Jour- nal of Canadian Petroleum Technology, Vol. 48, No. 6, 2009, pp. 26-29.
[5] J. A. Veil, “Drilling Waste Management,” Journal of Petroleum Technology, Vol. 54, 2002, pp. 50-52.
[6] M. P. Carignan, C. B. Lake and T. Menzies, “Assessment of Two Thermally Treated Drill Mud Wastes for Landfill Containment Applications,” Waste Management and Research, Vol. 25, No. 5, 2007, pp. 394-401. doi:10.1177/0734242X07073652
[7] J. G. Zhang, J. Nie and H. Deng, “An Experimental Study on the Treatment of Waste Drilling Fluid by Solid-Liquid Separation,” Environmental Protection of Oil & Gas Fields, in Chinese, Vol. 11, 2001, pp. 20-32.
[8] X. J. Guo and H. Ma, “Application and Study of High Density Drilling Fluid Technology,” Drilling Fluid and Completion Fluid, in Chinese, Vol. 26, 2009, pp. 8-10.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.