Facile and Efficient Method for Synthesis of Benzimidazole Derivatives Catalyzed by Zinc Triflate ()
Many methods have been reported for the synthesis of these benzimidazole derivatives. The condensation of 1,2-phenylenediamines with carboxylic acids or their derivatives is a common method, but it needs harsh conditions like polyphosphoric acid [6] at 170˚C - 180˚C. Another alternative approach is the condensation of aldehyde with 1,2-phenylenediamine in presence of different catalysts like Indion 190 resin [7], BF3.OEt2 [8], Ceric ammonium nitrate [9], iodine, [10] Silica sulfuric acid [11], In(OTf)3 [12], SiO2/ZnCl2 [13], silica supported sodium hydrogen sulphate [14], PEG [15], H2O2/ Fe(NO3)3 [16]. In recent years, Solvent-free synthesis of benzimidazoles under microwave irradiation using Yb(OTf)3 [17], KSF clay [18], metal halide supported alumina [19] and solid support [20,21] has been reported. However, many of these methods suffer from one or more drawbacks such as requirement of strong acidic conditions, long reaction times, low yields, tedious workup procedures, requirement of excess amounts of reagents, and use of toxic reagents, catalysts or solvents.
Figure 1. Established antiulcer agents in clinical practice.
Therefore, there is a strong demand for a highly efficient and environmentally benign method for the synthesis of these heterocycles.
As part of our research program in developing various synthetic methodologies, we report the synthesis of benzimidazoles using zinc triflate as an efficient catalyst (Scheme 1). The catalyst is known as an efficient catalyst in the literature for various organic transformations [22-26].
2. Results and Discussions
In order to establish the optimum reaction condition for this reaction, different solvents and various mole ratios of zinc triflate were examined. In our preliminarily investigation was carried out on the model reaction of o-phenylenediamine and 4-methoxy benzaldehyde. As shown in Table 1, different solvents can result in different yields. It was found that ethanol is the best solvent for condensation reaction, with its fast conversion, high yield and low toxicity. Zinc triflate was added in various mole ratios in ethanol at reflux. As shown in Table 2. The best yields were obtained with 10 mol% of zinc triflate. The electronic effects of the different substituted aldehydes have been investigated in Table 3 and it was observed that aldehydes bearing both electron donating and electron with drawing substituents gave the desired benzimidazoles in good yields. Products were confirmed by comparing with authentic sample (1H NMR, MR and Mass).
3. Conclusions
In conclusion, Zinc triflate was found to be an efficient catalyst for the formation of benzimidazole from aldehydes and o-phenylenediamine. The use of this inexpensive and easily available catalyst makes this protocol practical, environment friendly and economically attrac-
Scheme 1. Synthesis of Benzimidazole derivatives catalyzed by zinc triflate.
Table 1. Effect of Solvent in the synthesis of 2-(4-Methoxyphenyl) benzimidazole.
Table 2. various mole ratios of zinc triflate for the synthesis of 2-(4-Methoxyphenyl) benzimidazole.
tive. The simple work-up procedure, high yields of products and nontoxic nature of the catalyst are other advantages of the present method.
3.1. Experimental
All 1H NMR spectra were recorded on 400 MHz Varian FT-NMR spectrometers. All chemical shifts are given as δ
Table 3. synthesis of 2-substituted benzimidazoles from O-Phenylenediamine and aldehydesa.
value with reference to Tetra methyl silane (TMS) as an internal standard. Products were purified by flash chromatography on 100 - 200 mesh silica gel. The chemicals and solvents were purchased from commercial suppliers either from Aldrich, Spectrochem and they were used without purification prior to use.
3.2. Zinc Triflate Catalyzed Synthesis of 2-Substituted Benzimidazole Derivatives from Aldehydes
A mixture of o-phenylenediamine (1 mmol), benzaldehyde (1.0 mmol) and Zn(OTf)2 (10 mol%) in Ethanol (5 ml) was placed in a 50 ml round bottom flask and stirred at reflux for 8 h. The progress of the reaction was monitored by TLC Hexane: EtOAc (8:2) after completion of the reaction, the reaction mixture was cooled and treated by dilution with EtOAc (20 mL). Total organic layer was washed with water, brine solution and dried over Na2SO4 and evaporated under vacuum. Obtained crude residue was purified by column chromatography to give 2-substituted benzimidazoles.
2-Phenylbenzimidazole [27]: Off white solid; m.p: 289˚C - 291˚C; 1H NMR (DMSO-d6): δ13.02 (br s, 1H), 8.20 (d, J = 7.6 Hz, 2H), 7.67 - 7.65 (m, 1H), 7.56 - 7.49 (m, 4H), 7.22 - 7.18 (m, 2H); (LC-MS) m/z: 195.08 [M + H]+; IR (KBr, cm-1): 3420, 2920, 2627, 1623, 1410, 1276, 1119, 970, 738.
2-(2-Chlorophenyl) benzimidazole [28]: Light pink red solid; m.p: 231˚C - 233˚C; 1H NMR (DMSO-d6): δ12.80 (br s, 1H), 7.91 - 0.89 (m, 1H), 7.67 - 7.62 (m, 3H), 7.57 - 7.52 (m, 2H), 7.25 - 7.23 (m, 2H); (LC-MS) m/z: 229.04 [M + H]+
2-(3-Chlorophenyl) benzimidazole [28]: Colourless solid; m.p: 234˚C - 236˚C; 1H NMR (DMSO-d6): δ13.06 (br s, 1H), 8.40 (s, 1H), 8.27 (d, J = 6.8 Hz, 1H), 7.81 - 7.72 (m, 4H), 7.49 - 7.47 (m, 2H); (LC-MS) m/z: 229.04 [M + H]+
2-(4-Chlorophenyl) benzimidazole [29]: Colour less solid; m.p: 289˚C - 291˚C; 1H NMR (DMSO-d6): δ12.9 (br s, 1H), 8.15 (d, J = 8 Hz, 2H), 7.64 - 7.49 (m, 4H), 7.20 (d, J = 8 Hz, 2H); (LC-MS) m/z: 229.04 [M + H]+
2-o-tolylbenzimidazole [27]: Colour less solid; m.p: 220˚C - 222˚C; 1H NMR (DMSO-d6): δ13.03 (br s, 1H), 7.82 - 7.79 (m, 3H), 7.60 - 7.58 (m, 1H), 7.56 - 7.45 (m, 4H), 2.58 (s, 3H); (LC-MS) m/z: 209.10 [M + H]+
2-p-tolylbenzimidazole [27]: Colourless solid; m.p: 265˚C - 267˚C; 1H NMR (DMSO-d6): δ12.81 (br s, 1H), 8.06 (d, J = 8 Hz, 2H), 7.56 (m, 2H), 7.36 (d, J = 8 Hz, 2H), 7.19 (m, 2H), 2.38 (s, 3H); (LC-MS) m/z: 209.10 [M + H]+
2-(2-Methoxyphenyl) benzimidazole [30]: Colourless solid; m.p: 173˚C - 175˚C; 1H NMR (DMSO-d6): δ13.5 (br s, 1H), 8.29 (d, J = 7.2 Hz, 1H), 7.76 - 7.74 (m, 2H), 7.63 - 7.59 (m, 1H), 7.39 - 7.32 (m, 3H), 7.22 - 7.18 (m, 1H), 4.06 (s, 3H); (LC-MS) m/z: 225.07 [M + H]+
2-(4-Methoxyphenyl) benzimidazole [27]: Colourless solid; m.p: 218˚C - 221˚C; 1H NMR (DMSO-d6): δ12.90 (br s, 1H), 8.21 (d, J = 8.4 Hz, 2H), 7.70 - 7.68 (m, 2H), 7.38 - 7.36 (m, 2H), 7.21 (d, J = 8.8 Hz, 2H), 3.88 (s, 3H); (LC-MS) m/z: 225.07 [M + H]+
2-(3-nitrophenyl) benzimidazole [29]: Off-white solid; m.p: 203˚C - 205˚C; 1H NMR (DMSO-d6): δ13.2 (br s, 1H), 9.02 (s, 1H), 8.60 (d, J = 7.6 Hz, 1H), 8.33 (d, J = 7.9 Hz, 1H), 7.85 (t, J = 7.9 Hz, 1H), 7.7 - 7.52 (m, 2H), 7.25 (t, J = 6.8 Hz, 2H); (LC-MS) m/z: 240.06 [M + H]+
2-benzylbenzimidazole [27]: Off white solid; m.p: 177 - 179˚C; 1H NMR (DMSO-d6): δ13.0 (br s, 1H), 7.52 - 7.50 (m, 2H), 7.34 - 7.16 (m, 7H), 4.21 (s, 2H); (LC-MS) m/z: 209.10 [M + H]+
Acknowledgements
The authors are very much grateful to the management of Chalapathi Institute of Engineering and Technology, Guntur, A.P, India, for providing moral support in carrying out this work.