A Resistance Based Biosensor That Utilizes Conductive Microfibers for Microbial Pathogen Detection


Escherichia coli O157:H7 (E. coli O157:H7) is one of the top pathogens of interest for the development of rapid diagnostic systems for food and water samples. The objective of this research is to develop a rapid, novel electrochemical biosensor based on the use of polypropylene microfiber membranes coated with a conductive polypyrrole and antibody functionalized for the biological capture and detection of E. coli O157:H7 inthe field. Using glutaraldehyde, pathogen specific antibodies are covalently attached to conductive microfiber membranes which are then blocked using a 5% bovine serum albumin solution. The functionalized membranes are then exposed to E. coli O157:H7 cells washed in Butterfield’s phosphate buffer and added to a phosphate-buffer electrolyte solution. When a voltage is applied to the system, the presence of the captured pathogen on the fiber surface results in an increase in resistance at the electrotextile electrode surface, indicating a positive result. In this study, the initial resistance of the membrane in the electrochemical system was established and found to range between 5.8 and 13 . The resistance of the system not associated with the electrotextile fibers was calculated to contribute to only 2.8% of the total system resistance, and found not to be significant. A proof of concept experiment was conducted and determined that the electrotextile electrode was able to differentiate between small changes in a solution’s conductivity associated with the presence of E. coli O157:H7 cells over a concentration range of log 0 - 9 CFU/mL.

Share and Cite:

McGraw, S. , Alocilja, E. , Senecal, K. and Senecal, A. (2012) A Resistance Based Biosensor That Utilizes Conductive Microfibers for Microbial Pathogen Detection. Open Journal of Applied Biosensor, 1, 36-43. doi: 10.4236/ojab.2012.13005.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] J. W. Sanders, S. D. Putnam, M. S. Riddle and D. R. Tribble, “Military Importance of Diarrhea: Lessons from the Middle East,” Current Opinion in Gastroenterology, Vol. 21, No. 1, 2005, pp. 9-14.
[2] K. C. Hyams, K. Hanson, F. S. Wignall, J. Escamilla and E. C. Oldfield, “The Impact of Infectious Diseases on the Health of US Troops Deployed to the Persian Gulf during Operations Desert Shield and Desert Storm,” Clinical Infectious Diseases, Vol. 20, No. 6, 1995, pp. 1497-1504. doi:10.1093/clinids/20.6.1497
[3] A. N. Sharpe, “Food Sample Preparation and Enrichment for Rapid Detection,” In: S. T. Clarke, K. C. Thompson, C. W. Keevil and M. S. Smith, Eds., Rapid Detection Assays: For Food and Water, Royal Society of Chemistry, Cornwall, 2001, pp. 129-137. doi:10.1039/9781847551818-00129
[4] B. A. Oyofo, et al., “A Survey of Enteropathogens among United States Military Personnel During Operation Bright Star ‘94, in Cairo, Egypt,” Military Medicine, Vol. 160, No. 7, 1995, pp. 331-334.
[5] A. Senecal and P. Marek, “Military Food Safety Technologies,” In: A. H. Barrett and A. V. Cardello, Eds., Military Food Engineering and Ration Technology, DEStech Publications, Inc., Lancaster, 2012, pp. 157-194.
[6] J. Wang, “Analytical Electrochemistry,” 2nd Edition, John Wiley & Sons, New York, 2000. doi:10.1002/0471228230
[7] E. C. Alocilja and S. M. Radke, “Market Analysis of Biosensors for Food Safety,” Biosensors and Bioelectronics, Vol. 18, No. 5-6, 2003, pp. 841-846. doi:10.1016/S0956-5663(03)00009-5
[8] A. Swain, “Biosensors: A New Realism,” AnnalesdeBiologie Clinique, Vol. 50, No. 3, 1992, pp. 175-179.
[9] A. Warsinke, “Biosensors for Food Analysis,” In: F. W. Scheller, F. Schubert and J. Fedrowitz, Eds., Frontiers in Biosensorics II: Practical Applications, Birkhuaser Basel, Basel, 1997, pp. 121-140. doi:10.1007/978-3-0348-9045-8_9
[10] X. Munoz-Berbel, et al., “Impedance-Based Biosensors for Pathogen Detection,” In: M. Zourob, S. Elwary and A. Turner, Eds., Principles of Bacterial Detection: Biosensors, Recognition Receptors and Microsystems, Springer Science+Business Media, New York, 2008, pp. 341-370. doi:10.1007/978-0-387-75113-9_15
[11] R. V. Gregory, W. C. Kimbrell and H. H. Kuhn, “Electrically Conductive Non-Metallic Textile Coatings,” Journal of Coated Fabrics, Vol. 20, 1991, pp. 167-175.
[12] C. L. Heisey, J. P. Wightman, E. H. Pittman and H. H. Kuhn, “Surface and Adhesion Properties of Polypyrrole- Coated Textiles,” Textile Research Journal, Vol. 63, No. 5, 1993, pp. 247-256. doi:10.1177/004051759306300501
[13] H. H. Kuhn and W. C. Kimbrell, “Method for Making Electrically Conductive Textile Materials,” US Patent No. 4877646, 1989.
[14] H. H. Kuhn, W. C. Kimbrell, J. E. Fowler and C. N. Barry, “Properties and Applications of Conductive Textiles,” Synthetic Metals, Vol. 57, No. 1, 1993, pp. 3707-3712. doi:10.1016/0379-6779(93)90501-M
[15] F. Granato, et al., “Disposable Electrospun Electrodes Based on Conducting Nanofibers,” Electroanalysis, Vol. 20, No. 12, 2008, pp. 1374-1377. doi:10.1002/elan.200804185
[16] C. Burger, B. S. Hsiao and B. Chu, “Nanofibrous Materials and Their Applications,” Annual Review of Materials Research, Vol. 36, 2006, pp. 333-368. doi:10.1146/annurev.matsci.36.011205.123537
[17] A. Senecal, J. Magnone, P. Marek and K. Senecal, “Development of Functional Nanofibrous Membrane Assemblies Towards Biological Sensing,” Reactive& Functional Polymers, Vol. 68, No. 10, 2008, pp. 1429-1434. doi:10.1016/j.reactfunctpolym.2008.06.022
[18] S. K. McGraw, et al., “Antibody Immobilization on Conductive Polymer Coated Nonwoven Fibers for Biosensors,” Sensors and Transducers Journal, Vol. 13, Special Issue, 2011, pp. 142-149.
[19] S. K. McGraw, E. Alocilja, A. Senecal and K. Senecal, “Synthesis of a Functionalized Polypyrrole Coated Electrotextile for Use in Biosensors,” Biosensors, in Press.
[20] S. K. McGraw, E. Alocilja, A. Senecal and K. Senecal, “The Effect of 3-Thiopheneacetic Acid in the Polymerization of a Conductive Electro Textile for Use in Biosensor Development,” Manuscript Submitted for Publication.
[21] D. Bhattacharyya, K. Senecal, P. Marek, A. Senecal and K. K. Gleason, “High Surface Area Flexible Chemiresistive Biosensor by Oxidative Chemical Vapor Deposition,” Advanced Functional Materials, Vol. 21, No. 22, 2011, pp. 4328-4337. doi:10.1002/adfm.201101071
[22] International Dairy Federation, “Milk and Milk Products: Enumeration of Microorganisms: Colony Count at 3 Degrees C,” Provisional IDF Standard 100A, International Dairy Federation, Brussels, 1987.
[23] S. Niemela, “Statistical Evaluation of Results from Quantitative Microbiological Examinations,” Nordic Committee in Food Analysis Report No. 1, Nordic Committee in Food Analysis, Uppsala, 1983.
[24] Z. Tahir, E. Alocilja and D. Grooms, “Indium Tin Oxide- Polyaniline Biosensor: Fabrication and Characterization,” Sensors, Vol. 7, No. 7, 2007, pp. 1123-1140. doi:10.3390/s7071123
[25] M. V. Cattaneo, J. H. T. Luong and S. Mercille, “Monitoring Glutamine in Mammalian Cell Cultures Using an Amperometric Biosensor,” Biosensors and Bioelectronics, Vol. 7, No. 5, 1992, pp. 329-334. doi:10.1016/0956-5663(92)85028-9
[26] F. Darain, S.-U. Park and Y.-B. Shim, “Disposable Amperometric Immunosensor System for Rabbit IgG Using a Conducting Polymer Modified Screen-Printed Electrode,” Biosensors and Bioelectronics, Vol. 18, No. 5-6, 2003, pp. 773-780. doi:10.1016/S0956-5663(03)00004-6
[27] C. G. Tsiafoulis, M. I. Prodromidis and M. I. Karayannis, “Development of an Amperometric Biosensing Method for the Determination of L-Fucose in Pretreated Urine,” Biosensors and Bioelectronics, Vol. 20, No. 3, 2004, pp. 620-627. doi:10.1016/j.bios.2004.03.012
[28] S. M. Radke and E. C. Alocilja, “Design and Fabrication of a Microimpedance Biosensor for Bacterial Detection,” IEEE of Sensors Journal, Vol. 4, No. 4, 2004, pp. 434- 440.
[29] H. Tien and A. Ottova-Leitmannova, “Membrane Biophysics: As Viewed From Experimental Bilayer Lipid Membranes, MST Membrane Science and Technology Series, Vol. 5,” Elsevier, Amsterdam, 2000. doi:10.1109/JSEN.2004.830300

Copyright © 2023 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.