Detection of Damage and Crack in Railhead by Using Eddy Current Testing
Zenglu Song, Tsutomu Yamada, Hideki Shitara, Yasushi Takemura
DOI: 10.4236/jemaa.2011.312082   PDF    HTML   XML   8,094 Downloads   15,851 Views   Citations


Eddy current testing is a nondestructive testing method, which is used to detect discontinuities and defects in conductive materials. Using this technique, two different types of artificial defects in a railhead were evaluated in order to analyze the relationship between different types of defects and eddy current signals, and to obtain data on the size of the rail surface defects and crack location. The actually used rail sample was also studied. Surface cracks and defects were clearly observed as amplitude and phase changes of detected signals. This study succeeds in quantitatively analyzing and discriminating the damage types.

Share and Cite:

Z. Song, T. Yamada, H. Shitara and Y. Takemura, "Detection of Damage and Crack in Railhead by Using Eddy Current Testing," Journal of Electromagnetic Analysis and Applications, Vol. 3 No. 12, 2011, pp. 546-550. doi: 10.4236/jemaa.2011.312082.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Z. Chen, N. Yusa and K. Miya, “Enhancements of Eddy Current Testing Techniques for Quantitative,” Nuclear Engineering and Design, Vol. 238, No. 7, 2008, pp. 1651-1656. doi:10.1016/j.nucengdes.2007.12.015
[2] J. C. Aldrin and J. S. Knopp, “Crack Characterization Method with Invariance to Noise Features for Eddy Cur- rent Inspection of Fasterner Sites,” Journal of Nondestruc- tive Evaluation, Vol. 25, No. 4, 2006, pp. 165-181. doi:10.1007/s10921-006-0014-5
[3] B. Helifa, A. Oulhadj, A. Benbelghit, I. K. Lefkaier, F. Boubenider and D. Boutassouna, “Detection and Measure- ment of Surface Cracks in Ferromagnetic Materials Using Eddy Current Testing,” NDT&E International, Vol. 39, 2006, pp. 384-390. doi:10.1016/j.ndteint.2005.11.004
[4] H. Yamada, T. Hasegawa, Y. Ishihara, T. Kiwa and K. Tsukada, “Difference in the Detection Limits of Flaws in the Depths of Multi-Layered and Continuous Aluminum Plates Using Low-Frequency Eddy Current Testing,” NDT&E International, Vol. 41, No. 2, 2008, pp. 108-111. doi:10.1016/j.ndteint.2007.08.004
[5] C. Mandache and J. H. V. Lefebvre, “Transient and Harmonic Eddy Currents: Lift-Off Point of Intersection,” NDT&E International, Vol. 39, No. 7, 2006, pp. 57-60. doi:10.1016/j.ndteint.2005.06.003
[6] D. Hur, M. Choi, D. Lee, S. Kim and J. Han, “A Case Study on Detection and Sizing of Defects in Steam Gen- erator Tubes Using Eddy Current Testing, “ Nuclear Engineering and Design, Vol. 240, 2010, pp. 204-208. doi:10.1016/j.nucengdes.2009.10.006
[7] K. Kimoto, S. Ueno and S. Hirose, “Image-Based Sizing of Surface-Breaking Cracks by SH-Wave Array Ultrasonic Testing,” Ultrasonics, Vol. 45, No. 1-4, 2006, pp. 152-164. doi:10.1016/j.ultras.2006.08.006
[8] R. Raisutis, R. Kazys, E. Zukauskas, L. Mazeika and A. Vladisauskas, “Application of Ultrasonic Guided Waves for Non-Destructive Testing of Defective CFRP Rods with Multiple Delaminations,” NDT&E International, Vol. 43, No. 5, 2010, pp. 416-424. doi:10.1016/j.ndteint.2010.04.001
[9] E. Jasiūniene and E. Ukauskas, “The Ultrasonic Wave Interaction with Porosity Defects in Welded Rail Head,” Ultrasound, Vol. 65, No. 1, 2010, pp. 12-18.
[10] H. M. Thomas and T. Heckel, “Advantage of a Combined Ultrasonic and Eddy Current Examination for Railway Inspection Trains,” European Conference on Non-Destru- ctive Testing, Berlin, 25-29 September 2006, We.4.5.3.
[11] R. Pohl, A. Erhard, H. J. Montag, H. M. Thomas and H. Wustenberg, “NDT Techniques for Railroad Wheel and Gauge Corner Inspection,” NDT&E International, Vol. 37, No. 2, 2004, pp. 89-94. doi:10.1016/j.ndteint.2003.06.001

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.