The Architectural Unit Setting up and Architectural Characteristics of Néré, Parkia biglobosa, Jack, R. Br. (Fabaceae)


Parkia biglobosa is a much-loved and over-exploited African savannah species for its socio-economic importance. Knowing and taking into account its architectural unit, which is the basis for diagnosing phenology, productivity and tree health, could provide a new perspective on its sustainable management. The aim of this study is to establish the architectural development in Parkia biglobosa by retrospective analysis. To achieve this objective, 390 individuals of all sizes ranging from seedlings to senescent trees were observed and analysed under various soil and climatic conditions in Côte d’Ivoire. The results showed that Parkia biglobosa is a light plant but shading tolerant. It is a mixed vegetative axis plant, the stem is orthotropic* in its proximal part and plagiotropic* (collapsing) in its distal part in young stage. The tree then transitions to an adult and old stage into a tree with a plagiotropic* axis in the proximal and distal parts, the trunk is built up by superimposing collapsed relay axes that gradually straighten, branching is sympodial*, growth is defined and sexuality is terminal and lateral. The ontogeny takes place in three phases: initiation of development and establishment of the crown (young), then flowering and establishment of the architectural unity (adult) and finally the death of secondary axes in the crown, duplication of the architecture by a series of partial and total reiterations (old). The level of organisation is 5: the phytomere, the module or growth unit, the axis, the architectural unit and the reiterated complex. Retrospective analysis of the modules showed that the dimensions of the growth units are indicators of morphological variation and species adaptation to a changing climate (P < 0.05). However, the equations generated by the morphological and habitat dimension linkage models are not significant (R2 and r < 0.7) to be used as a guide for field data collection. This study represents an initiation into the architectural study of this species and the information provided will serve as a basis for further research into the architecture in relation to the sustainable use of this species.

Share and Cite:

Adji, B. , Akaffou, D. , Letort, V. , Kang, M. , Wang, X. , Jaeger, M. , De Reffye, P. , Kouassi, K. , Houphouet, Y. , Duminil, J. , Caraglio, Y. and Sabatier, S. (2022) The Architectural Unit Setting up and Architectural Characteristics of Néré, Parkia biglobosa, Jack, R. Br. (Fabaceae). American Journal of Plant Sciences, 13, 109-136. doi: 10.4236/ajps.2022.131008.

1. Introduction

The architectural* study of a plant is a morphological approach that makes it possible to characterise the organisation of trees or groups of trees growing in different pedoclimatic contexts [1] [2] [3] [4]. In spite of this pedoclimatic variability, it nevertheless allows us to highlight a specific average architectural organisation that constitutes the species’ sketch or architectural unit*. This sketch is the architectural expression of the plant that allows it to be visually differentiated from another tree species without having studied it, and in the second instance constitutes the pillar of its sustainable management in case of threat [5] [6] [7]. Indeed, the architectural unit constitutes the smallest stem structure necessary and sufficient for the plant to reach its sexual maturity phase (complete reproduction) and thus complete its life cycle by forming flowers and fruits [8] [9]. The plant then continues its growth by altering this architectural unit through the phenomenon of duplication; a series of axes of different categories are then reproduced in the adult plant [10] [11] [12]. It is, therefore, necessary and important to bring out this architectural unit hidden in the tree, as it is the basis for future diagnostics by foresters or observers to assess the difficulties, phenology, health, productivity and reproducibility of species in various geographical situations under stress or climate change.

Plant architecture* can be achieved through retrospective analysis, which analyses the structure of the plant using various morphological markers that allow the formation and successive increases in length of the axes to be limited and dated. It depends on the spatial and temporal arrangement of the plant parts (branched hierarchical system), and is based on these morphological traits at the shoot and branch level (axes grouped into categories characterised by morphological criteria, exploration and/or reproduction role); then affected by endogenous (genetic) and exogenous (environmental) factors [10] [13]. The growth pattern through which the plant develops its form is the architectural model* of the plant or the basic growth strategy of a plant. The main architectural parameters generally studied are growth, branching, morphological differentiation of axes and the position of reproductive structures [5] [11].

This discipline has long been recognised as an important scientific tool in horticultural crops, understanding plant function, yield assessment and for the development of crop models [14] [15] [16]. It has been used extensively and successfully in Europe and South America for yield optimisation, forest management, preservation of important species, understanding the adaptation of species to climate, sustainable exploitation and safeguarding of threatened species [1] [2] [6] [7] [17]. However, it has never been applied or applied to emblematic West African species, yet this area is a strategic carbon sink encompassing many important overexploited and threatened species.

This is the case of Parkiabiglobosa, an agroforestry species indigenous to the savannahs of Africa. This species is much loved by the rural populations of this geographical area for its socio-economic role [18] [19] [20]. As a result, it is one of the most overexploited species among many others, but also the best documented to date [19] [21]. However, its architectural study does not exist in the literature to our knowledge. However, the knowledge of its architectural development sequence, its architectural characteristics and its architectural unity are very important for its phenological diagnosis, the evaluation of its productivity and its preservation. Indeed, in the first step, the architecture of this species completes its biological knowledge and in the second step, it allows access to the structure-function-time-environment relationship and thus can give a new point of view on the sustainable management of this species. The objective of this study is to establish the architectural development in Parkiabiglobosa via retrospective analysis of various individuals from different environmental conditions in Côte d’Ivoire.

2. Material and Methods

2.1. Trees Studied

390 freely growing individuals in open and forest environments were arbitrarily selected and observed. These individuals of different ages (young, adult and old) were derived from wild individuals of natural regeneration (forest) and artificial regeneration (1- and 2-year-old individuals planted and monitored in a nursery) benefiting from a canopy of variable size. The number of individuals as well as the dendrometric characteristics per age category and environment, and the location of the growth units or modules studied are recorded in Table 1.

2.2. Study Sites

The study was carried out in seven locations along a bioecological gradient in Côte d’Ivoire (Figure 1). The soil and climate characteristics of the surveyed locations are shown in Table 2.

2.3. Observation Methods

2.3.1. Sampling of Individuals

For each stage of tree development (young, adult and old), 10 wild individuals

Table 1. Dendrometric characteristics and number of individuals used according to age and environment.

Young trees = 1 to 5 years old, H (m) = 0.1 to 6 m and D or DBH (cm) = 1 to 19 cm; Adult trees = 6 to 20 years old, H (m) = 7 to 14 m and D or DBH (cm) = 20 to 50 cm; Old trees = ≥21 years old, H (m) = ≥15 m and D or DBH (cm) = ≥60 cm; H = height, D ou DBH = Tree diameter, Min = minimum, Max = Maximum, Indiv Nber = number of individuals observed, GU = growth units or modules.

Figure 1. Geographical location of the study area.

were arbitrarily and randomly selected in open and closed areas in six localities mentioned above (Ferké, Korhogo, Niakara, Katiola, Bouaké and Toumodi). 15 individuals aged 1 year and 15 individuals aged 2 years resulting from the germination of seeds raised and monitored in the nursery were also selected in a locality outside the natural propagation area of origin of the species (Daloa): 15 trees + 15 trees = 30 trees. We therefore have: 390 trees (10 individuals × 2 areas

Table 2. Characteristics of surveyed localities [22].

˚C = Celsius degree, mm = millimeter, W = west, N = North.

(open or closed) × 6 localities × 3 stages + 30 in the nursery). All trees were in good physiological condition (free of trauma). The samples were classified according to the level of analysis. They were characterised by growth site, age of individuals, number of individuals or axes observed, type of axes measured in the tree. The stages (young, adult and old) were arbitrarily chosen on the basis of their dendrometric size (height and diameter) according to individuals raised in nurseries and those present in plots set up in the 1970s and 1980s by the Côte d’Ivoire National Agricultural Research Centre (CNRA).

2.3.2. Retrospective Analysis: Choice of Axis Type and Habitat

Observations were made on different types of axes depending on the accessibility of the crowns in two different habitats. For young trees, the axes assessed were the main trunks because of the easy access and the non-frequency of secondary branches on all individuals in this category. For mature and old trees, the axes assessed were only tertiary branches and short twigs due to accessibility. Assessments were carried out in situ for young trees; whereas, for mature and old trees, branches were cut and transported to the laboratory for observations (Figure 2). Two types of environments were considered: undergrowth and full sun. The former refers to individuals living in a very shaded environment with a forest canopy or in an overcrowded environment with superior shelter. The latter refers to individuals isolated in full sun or in an open environment in direct contact with sunlight.

2.3.3. Architectural Analysis Method

Based on morphological concepts and criteria [10] [23] [24], architectural analysis [8] [17] consists of a global representation of the aerial branching system of individuals of various âge and growing in various environments. This global representation is accompanied by a precise morphological description of some parts of the aerial branching system. This analysis makes it possible to identify the different categories of axes (trunk, branches, twigs, etc.) and to characterise them by a set of criteria (ability to branch, growth direction, flowering, etc.).

In order to identify these different characteristics of growth and branching modes, we started with a complete description of the aerial system of each individual, integrating the spatial arrangement and structure of the different axes constituting it by means of drawings and diagrams. We used the usual morphological markers of the functioning of the primary meristems, printed in the bark

Figure 2. Images of fine morphological observations with retrospective analysis of growth units or modules in Parkiabiglobosa. The labels or areas circled in red are the growth stops or trauma to meristem function and the limits of the growth modules (GU); the black labels named MOD are the lengths of the growth units or modules.

and anatomy of the different axes (Figure 2). We studied several individuals at various stages of development and in various environmental conditions, considering the organism at different scales from the level of organisation of the organ (node, internode and leaf) to that of the whole plant. We described the fundamental morphological and architectural characteristics of each of the standing plants with the naked eye and with binoculars for the larger ones by observation and drawings. The juxtaposition/comparison of these drawings/diagrams allowed us to characterise the architecture of the species and to reconstruct its development. More detailed morphological observations could be made by removing particular parts of trees after felling (Figure 2). First, we described younger individuals (seedling stage) up to older or taller, more complex individuals (structure with one or more branching order). The level of complexity was assessed by the maximum branching order of the aerial system. In the field, the individuals observed per stage depended on the structural variability expressed and the ability to generalise and synthesise the average architecture of the stage concerned. For the youngest and smallest individual we considered the whole plant and for larger individuals, we observed and drew the whole plant in situ and took parts of the plant for detailed observations in situ and in the laboratory. Notes specifying the scale, location of the plant and certain facts or events were marked on each drawing. The results were presented in the form of drawings characterising representative individuals at each stage of development, a set of diagrams revealing the developmental sequence of the species etc. Each diagram is a synthesis of the observations made and the results of the study. Each diagram is a synthesis of observations made on several individuals that have reached the same stage of development.

2.3.4. Parameters Assessed

To qualify (architectural analysis) and quantify (retrospective analysis) the axes in the architectural approach and to facilitate the drawings and subsequent description of the architectural characterisation, the following characteristics were used:

- Qualitative aspects: leafy axis (phyllotaxis*, internode), growth (definite*, indefinite*, monopodial* or sympodial*), direction and differentiation of axes (orthotropic* or plagiotropic*), growth (definite*, indefinite*, monopodial* or sympodial*, monocyclism, polycyclism), direction and differentiation of axes (orthotropic* or plagiotropic*, mixed*, ageotropic*), mode of branching (order of branching, immediate*, deferred*, delayed*; rhythmic*, continuous*, diffuse*, acrotone*, mesotone*, basitone*; epitone*, hypotone* and amphitone*), position of sexuality (terminal and lateral), life span of axes and leaves [5];

- Quantitative aspects: average length and diameter of growth units or modules (MODs), average number of phytomeres per MOD. These data were collected on the first two growth units or Modules from the tip (apex) of the shoots of the primary axes (young trees) and secondary and tertiary axes (mature and old trees).

2.3.5. Statistical Data Analysis

Quantitative data were pooled and compared with each other (MANOVA) using SAS software version 9.4. The Student-Newman-Keuls test at the 5% threshold was used for post hoc comparisons. The links between the different quantitative parameters were made using XLSTAT 2020 version 7.5.

3. Results

Through this work, which required the observation of several individuals of all sizes (from seedlings to senescent trees) by means of synthetic drawings, the development by stage (young, adult and old) was established. The following analysis is the result of such a description. There are therefore 3 main stages during the ontogeny of the species, each defined by precise morphological characteristics. Firstly, we characterise the endogenous development of the young plant until senescence and then we analyse, if possible, certain variations, whether they are natural variations within homogeneous plantations or variations induced by the management of the stands (density of the forest cover) or the consequences of pedological or climatic events.

3.1. Young Stage

In Parkiabiglobosa, the seedling consists of an unbranched stem with bipinnate compound leaves. The phyllotaxy is alternate spiral. At this stage the leaf bears 2 to 6 leaflets with one stipule at the base of the petiole (leaf sheath) and another stipule at the end of the primary rachis. Each leaflet bears 9 to 16 pairs of secondary leaflets and the secondary rachis bear a single secondary stipule inserted at the end of the secondary rachis. The young stem tends to zig-zag (right-left-right-left) in the direction of the weight of the established leaves. After the formation of a phytomere, the stem continues to grow in the opposite direction to the previous leaf. This causes the main stem to twist and gives the impression that the leaves are distributed in an alternating spiral fashion along the leaf stem, but in reality the phyllotaxy is alternating distichous.

After 3 to 4 months of evolution, the apical meristem dies by desiccation, the part below the dead part swells by bulging, giving a water tower shape to the phytomere. At this point, the initially monopodial growth mode becomes sympodial. In the forest, nodule-like swellings appear on the leaf rachis and the main stem at this stage. The nearest axillary bud takes over in the direction of the main stem and after 2 to 6 phytomeres, it dies in turn, and so on. This system forms clearly visible modules along the stem. In most cases there is only one relay shoot and the structure is a monochasial* sympod. The stem is usually curved at the distal end and later straightens as the stem expands and loses its leaves. In fact, as the stem grows in height, the old leaves (in the base) are pruned off by themselves and in succession. The stem retains only the new leaves of the new module in the apical part. These leaves are larger and heavier than the phytomer, the module and often the stem; it is the weight of the leaves that causes the stem to collapse. After a year, when the main stem bends, the relay bud sets up in the bending part of the stem, the rest of the bent portion prunes and so on. The stem is a pseudomonopod* and the modules are clearly visible on the stem (growth arrest zones are marked by markers and well-swollen plateau-like areas).

The branching appears in the second year, the branches are short, deferred* and located in the middle of the tree. The branching is initially in a vertical direction and collapses, and then lengthens in the horizontal direction. It forms in the middle of most modules (mesotone*) and often at the end of the modules (acrotone*). The branching is not continuous, it does not follow any growth rhythm, it is diffuse* on the trunk. All the branches formed follow the same process of pruning the trunk and are all sympodes. This is the beginning of the establishment of the top. Observations on individuals of this stage revealed that the individuals cultivated and monitored in the nursery were larger and more vigorous than the wild individuals observed in the forest. The latter suffer more trauma (insect attacks) than those observed in nurseries.

Table 3 shows the comparison of the morphological parameters of the modules or GUs according to the habitat, the localities surveyed and according to the habitat per locality. The habitat does not statistically influence the morphology of the modules (P > 0.05). However, most of the morphological parameters vary from one locality to another (P < 0.05) and from one habitat to another per locality (P < 0.05).

3.2. Mature Tree and Flowering

The tree continues its development by setting up increasingly vigorous branches whose structure is a succession of amphitone* and hypotone* relay axes. At this stage, the tree still has a hierarchical structure around a single large trunk. The architectural unit is established at this stage after flowering with 3 categories of axes (Table 4) and 4 orders of branching. Surveys of rural populations revealed that the first flowering occurs between the 10th and 16th year after planting. Flowering is terminal and lateral in this species and occurs in the dry season. The flower buds grow longer and invade the whole tree. Flowering occurs only on the A4 (majority) and short branches (minority). The terminal inflorescence of the axes and trunk later leads to the production of successive forks (vigorous relays), one of which is established in the extension of the trunk (vertical) until a certain point. This direction then becomes oblique and then horizontal under the effect of gravity. When the tree reaches its maximum development, the contour of the crown is rounded and irregular; the periphery of this crown is composed of sympodial structures of almost identical size and morphology.

Table 4 shows the morphological and architectural description of the axis types constituting the architectural unit in Parkiabiglobosa.

Table 5 presents the comparison of morphological parameters of modules or GUs according to habitat, surveyed localities and habitat by locality in adult

Table 3. Influence of habitat, locality and habitat by locality on the morphology of the first two modules in young trees of Parkiabiglobosa.

Values with the same letters are not statistically different at the 5% level. Psol = open and sunny environment, Sbs = crowded or forested environment, Height (m) = tree height in metres, Diam (cm) = diameter at the base of the tree in centimetres, MOD = Module or Growth Unit, MOD1-length (cm) = length of the first module or growth unit in centimetres, MOD1-diam (cm) = diameter at the base of the first module or growth unit in centimetres, MOD1-leaf Nber = number of leaves or phytomers carried by the first module or growth unit, MOD2-length (cm), MOD2-diam (cm), MOD2-leaf Nber = Parameters of the second growth unit or Modules. MOD1 are the growth units or modules located at the shoot tip (apex or summit of the sampled axis); MOD2 are the growth units or modules that directly follow MOD1.

Table 4. Summary table of the characteristics of the architectural unit in Parkiabiglobosa.

Table 5. Influence of habitat, locality and habitat by locality on the morphology of the first two modules in adult Parkia biglobosa trees.

Values with the same letters are not statistically different at the 5% level.

trees. According to the table, habitat and surveyed localities did not significantly influence the majority of the morphological parameters of the assessed modules (P > 0.05).

3.3. Older Scene

In old and aged trees, all twigs tend to droop. New sympodial twigs develop from dormant buds by piling up in the bending zones in amphitone* and epitone* positions. These structures are in fact successive partial reiterations. The total reiterations occur later, giving the impression of rescuing the tree in distress. These new reiterations regenerate the top of the tree, while the old structures fall off the tree (the tree molts). The whole tree becomes a reiterated complex; in the periphery of the crown, the sympodial structures form successive arches (piling up). At this stage, the tree can carry up to 6 orders of branching with always three types of axis categories. The branching orders are the capacity to carry an axis (carrier-to-carrier ratio), while the axis category is a set of axes groupable by common botanical entity characteristics (size, diameter, number of GUs, phytomeres, flower buds, etc.). The tree can branch up to 6 times in order, but the axis categories are repeated in the successive branching at this stage. During flowering, the reiterations also bear terminal and lateral inflorescences. Flowering takes over the whole tree at this time; the outline of the crown is rounded but irregular.

Table 6 presents the analysis of variance of the morphological parameters of the modules by habitat and by locality in the sampled old trees of Parkiabiglobosa. The former moduli were not influenced by the different localities surveyed in old trees (P > 0.05). However, they were influenced by habitat type (P < 0.05). Habitat (undergrowth and full sun) altered the morphology of the growth units at the shoot tips. However, the morphology of the growth units was statistically similar in all surveyed localities (Table 6).

Table 6. Influence of environment and locality on the morphology of growth units or modulus in old trees of Parkia biglobosa.

Values with the same letters are not statistically different at the 5% level.

3.4. Relationship between the Morphology Parameters of Modules Present on Parkiabiglobosa Axes Observed

The analysis of the links between the morphological parameters of the modules evaluated (Table 7), indicates strong positive correlations between the lengths and diameters of module 1 (r = 0.6986), between the lengths and the numbers of leaves of module 1 (r = 0.6375) and between the diameters of modules 1 and 2 (r = 0.7156).

The relationships between the full-sun environment and the undergrowth environment in relation to the morphological parameters of the modules evaluated on the axes of the individuals are presented globally in Figure 3. This figure indicates very weak relationships (R2 = 0.028; r = 0.167) between the lengths of the modules observed in full sun and those observed in undergrowth; then equally weak relationships (R2 = 0.078; r = 0.279) between the numbers of leaves inserted on the modules of the axes evaluated in full sun and undergrowth. Although 57.19% of the diameters of the modules observed in full sun are related and 32.71% are explained by those observed in undergrowth (Figure 3(b)), the relationships remain weak and cannot be taken into account. The allometric equations of the models are:

- Leng-MOD-psol = 13.91 + 0.21*Leng-MOD-sbs (Leng-MOD-psol = Length of modules or growth units in the full sun environment and Leng-MOD-sbs = Length of modules or growth units in the undergrowth environment);

- Diam-MOD-psol = 0.31 + 0.66*Diam-MOD-sbs (Diam-MOD-psol = Diameter of modules or growth units in the full sun environment and Diam-MOD-sbs = Diameter of modules or growth units in the undergrowth environment);

- Nber-leaf-MOD-psol = 10.08 + 0.31*Nber-leafl-MOD-sbs (Nber-leaf-MOD- psol = Number of leaves carried by the modules or growth units of the full sun environment and Nber-leaf-MOD-sbs = Number of leaves carried by the modules or growth units of the undergrowth environment).

Table 7. Correlation matrix (Pearson (n)).

Values in bold are different from 0 at significance level alpha = 0.05.

Figure 3. regressions between module lengths observed in full sun and undergrowth (A), between module diameters observed in full sun and undergrowth (B) and between the number of leaves carried by modules in full sun and undergrowth (C).

Figure 4 shows the correlations between the different module morphology parameters. Despite the significance of the parameters, the low correlation coefficients (R2 and r < 0.8) indicate negligible links in the set between the evaluated parameters. The equations of the models are as follows:

- Leng-MOD = 8.7 + 6.91*Diam-MOD (Leng-MOD = Length of modules or growth units and Diam-MOD = Module or growth unit diameter);

- Leng-MOD = 2.97 + 0.98*Nber-leaf-MOD (Nbr-leaf-MOD = Number of leaves on modules or growth units) and

- Nber-leaf-MOD = 7.12 + 6.14*Diam-MOD

Parkiabiglobosa is a tree identical to Champagnat’s model at the young tree stage (plant with a mixed vegetative axis, the main stem is orthotropic in its proximal part and plagiotropic “sags” in its distal part). The tree then transits to the Troll model at the adult and old stage (plant with a plagiotropic axis in the proximal and distal parts, the trunk is built by superimposing collapsed relay axes that gradually straighten, sympodial branching, amphitone* and epitone*, definite growth, terminal and lateral sexuality). Its structure is set up in three

Figure 4. Representation of the relationships between module length and diameter (A), module length and leaf number (B) and leaf number and module diameter (C) in Parkiabiglobosa.

phases: initiation of development and establishment of the top, then establishment of the architectural unit and finally duplication of the architecture by a series of partial and total reiterations. The level of organisation is 5: the phytomere, the module or growth unit, the axis, the architectural unit and the reiterated complex. Table 8 shows the main architectural characters in Parkiabiglobosa.

Figure 5 shows some drawings and diagrams summarising the architectural development in Parkia biglobosa.

4. Discussion

Each plant follows a succession of morphological development stages throughout its life with a precise sequence ordered by different elementary entities (composition of the tree axis structure): phytomere, growth unit [5] [12] [25]. This scientific discipline has several advantages: it allows us to understand the functioning and shape of plants, to describe the biological phenomena that gave rise to them and to translate the non-linear aspect of their reaction dynamics to certain stresses [7]. In this study, the architectural analysis carried out on Parkiabiglobosa along a climatic gradient made it possible to highlight its architectural characteristics. The analysis of the morphology of the modules informed us about the adaptability and the evolution of the species in relation to a changing environment. These results are an introduction to the architectural study of this species, in order to open up short, medium and long-term research perspectives.

4.1. Architectural Analysis

In Parkiabiglobosa, from the young stage, the leaves are already bipinnate and do not differentiate. Modules are formed in the very young stage by the death of the apex (trauma), which forms a monochasial sympod*. The boundaries of the modules are well marked by bulging areas on the main stem and the young tree forms a collapsed pseudomonopod in the apical part under the weight of the leafy cap of the terminal modules. In the young stage the species adopts the Champagnat

Table 8. Architectural characteristics of Parkiabiglobosa species.

Figure 5. drawings and diagrams relating to types of flowering (A), a and b: lateral flowering, c: terminal flowering; traumatic phenomena often encountered (B), a: drawing of young plants with nodosities on the rachis of leaves in the understory and length of growth units or modules, b: trauma of the apical meristem leading to the death of the bud and the establishment of growth modules, c: drawing and diagram of an adult individual developing according to Troll’s model; the sequence of architectural development from seedling to senescent tree (C), a: development according to Champagnat’s architectural model and b: architectural development according to Troll’s model; the influence of habitat on architectural development (D), a: architectural development in a closed or covered environment and b: in an open or sunny environment.

architectural model and transits to the Troll model in the adult and old stage after flowering. In fact, in the young stage, the stem is built as a repetitive stack of unbranched and discretely branched axes (short branches on the stem). The main axis is vertical at the base with the distal (younger) end curved at a large radius and brought back to the horizontal (collapsed) often to the ground due to gravity and the flexibility of the wood. The growth of the distal tips retains the vertical tendency and the leaves are spirally inserted with terminal and lateral flowering. The plant bears up to 6 orders of branching grouped into 3 categories of axes. This is the result of an intensive reiterative complex at the old stage. The architectural unit appears in the adult stage after flowering. According to [4], Champagnat’s pattern is not known in ferns, Gymnosperms and Monocotyledons. This pattern appears in more than 30 families in the Dicotyledons. In the adult and old stage, the leafy axes overlap indefinitely in a horizontal fashion and secondary growth straightens the base vertically (pseudomonopod). The sympodial structures that form by superposition often go in all directions by piling up. This species is colonial and dominates its environment. The Troll model is not represented in ferns, Gymnosperms or Monocotyledons. However, more than 50 families of Dicotyledons are concerned by this model and the species of the three families of Leguminosae are built mainly, but not exclusively, according to the Troll model [4].

Architectural analysis has been undertaken mostly on temperate and South American species and has proven to be highly effective and successful in managing plant genetic resources in these areas [3] [7] [26]. This is the case of Laetiaprocera and Dicoryniaguianensis [2]; Juglansregia and Juglansnigra [12]; Fraxinusexcelsior, Populusalba, Prunuspadus, Quercusrobur, Tiliacordata, Ulmuslaevis, Cornussanguinea, Corylusavellana, Prunusspinosa, Crataegusmonogyna, Euonymus europaeus, Sambucusnigra, Viburnum opulus [16]; Fagussylvatica [1], etc.

Generally, architectural analysis on each individual is most frequently used because of its effectiveness in clearly illustrating the developmental pattern of a species. However, it is possible to analyse the three-dimensional organisation of a forest in a global way based on dendrometric data and graphical representations of plant architecture [16]. This makes it possible to develop the general architectural model of a forest [27] in order to identify the interest in forest interpretation and management or to illustrate the interest of the architectural model in the interpretation of biodiversity [16]. Indeed, the criteria used to characterise the architectural state of a plant are not always relevant and applicable to other species. It is therefore necessary to develop architectural approaches by grouping species by first studying the development sequence of key species under various stresses and behaviours in order to generalise or attribute it to a vegetation [2]. This mechanism would provide a global architectural vision of a forest for its rapid management.

Plant architecture holds many keys to understanding the ecological performance of species because resources (water, light, nutrients) are spatially variable and disturbances (e.g. frost, fire and herbivory) also impact on plants [3] [28] [29]. The main drivers of the evolution of architectural traits probably include water stress in deserts. Plant architecture strongly influences ecological performance and its role in plant evolution has recently been studied in depth by [30] on the genus Euphorbia. The reason for their study was that plant architecture in relation to environmental and biotic variables was until now poorly understood. They therefore tested both phylogenetic and environmental signals to separate architectural traits into four categories. Their study showed that architectural traits explain the structural evolution of species and that this evolution is influenced by climatic constraints.

4.2. Growth Units or Modules Morphology

Parkiabiglobosa is a light species and native to arid areas (savannah). However, it is shade tolerant, as the results of this study revealed that individuals observed in the nursery were taller and more vigorous than young wild individuals observed in the forest. This may be due to trauma from insect and herbivore attacks in the forest than in the nursery. Furthermore, analysis of variance showed that in young trees, the largest individuals were found in the undergrowth for all surveyed localities. This is due to the search for light; the stems elongate by means of intense apical meristematic activity induced by auxin (phytohormone) in order to reach the canopy. The majority of these trees develop fewer branches and have a tapered monopodial trunk. The majority of these trees benefit from a humid environment due to evapotranspiration of leaves from trees with higher strata. In contrast to the young wild trees, which are exposed to full sun and have less of a microclimate that is favourable to their functioning (drier soil and environment). The latter are short and very often develop reiterations that are confused with branches. Their height is smaller because the race for light is not necessary and urgent in addition to the lack of water (dry soil). The effects of light and environment on development and growth have been demonstrated in several studies [31] [32] [33] [34] [35]. The results showed that the two environments considered (undergrowth and full sun) had no influence on the morphology of the growth units in young trees. Regardless of the environment, meristem function may depend on the plant genome and therefore cannot be significantly influenced by the environment in many cases. The expressed phenotype is therefore purely related to the plant genotype. Indeed, according to [4], the genetic programme for plant growth and development, of which the architecture is the visible expression, may not vary from one environment to another in several families of species. Locality has had influences on the morphology of growth units in young trees. This is due to the difference in climate, soil type and rainfall between localities. Indeed, observations on the morphology of growth units were made along a south-north drought gradient. It is obvious that some localities have more severe (drier) conditions than others. [12] [36] and [31] have shown in their research that soil depth and fertility, environment and age of individuals can influence the architectural development of a species. [37] and [38] have indicated in their studies that climate or ecological gradient has an effect on plant morphology. Similarly, the studies of [39] [40] and [41] indicated that the origin of differences in tree morphology is due to factors such as soil type, age and genetic characteristics of individuals.

In adult trees, the results showed that neither the environment nor the locality has a global and statistical influence on the morphology of the growth units. In fact, these trees were grouped by category on the basis of their dendrometric size without precise knowledge of the age of each individual. This remains a major weakness for this study. Furthermore, the axes evaluated were randomly selected at the top of the trees without sorting by axis category. It was found that on the secondary axes selected from adult trees, regardless of the environment and locality surveyed, the majority of terminal buds were synchronous (generalized bud break). In French Guiana, [42] had observed the same phenomenon on Parkiavelutina. According to them, at the tree level the phenological cycle (leaf fall, elongation of growth units and formation of growth rings) was synchronous and affected all axes, whereas at the population level trees could be desynchronised. They later concluded that it was possible to date a branch by counting the number of growth units or growth rings over many years with reasonable error. However, it was still difficult to estimate the exact month of their formation in order to study climatic influences.

In old trees, the analyses of variance showed that the two habitats considered and the locations surveyed had no significant effect on the dendrometric parameters and the morphology of the growth units. This is due to the age and physiological state of these individuals. Indeed, all individuals of this age were confused due to the high intraspecific similarity. All old individuals observed in any environment had almost identical qualitative and quantitative aspects (dendrometry and morphology of growth units). At this stage the architecture can evolve, the structure of the tree is degrading and homogeneous from one individual to another. According to [4], whatever the age of the plant, young or old, the distribution of aerial and underground organs (leaves, internodes, phytomeres, growth units) is a conflict between two contradictory influences: firstly, the genetic programme for growth and development dictates architectural rules; inherent in the genome, these rules are stable and predictable in the species considered. On the other hand, adverse ecological factors (light, wind, animals, etc.), which are naturally random, often distort the architectural programme.

The Pearson matrix showed a strong positive correlation between the morphological parameters evaluated on the modules. This means that as one variable increases, the second variable also increases. For example, as module 1 gets longer, their diameter increases and the number of leaves increases. The correlation between the different dimensions of organ morphology has been demonstrated in the studies of [43] and [44]. Also, [45] and [46] obtained similar results on Tectonagrandis and African coffee species respectively. However, in their studies, relationships between organ sizes of individuals from different environments were not established as was the case in our study. The allometric equations established by the linear model could be used to reduce the effort of collecting field data between the variables used and the two habitats considered if the relationships (R2 and r) were strong (R2 and r > 0.7). This is not the case.

5. Conclusions

This work firstly allowed us to understand and characterise architectural development in Parkiabiglobosa and secondly to highlight the variability of morphological markers at the end of the axes in the crown of the trees. Thus, the architectural development of a plant is a succession of ordered and precise sequences of morphological differentiations that can be translated into a modification in the expression of meristem function during ontogeny. The establishment of this sequence results in a repetition of homologous elementary entities during key stages corresponding to the degrees of complexity of the plant’s structure. The specific average architectural organisation constitutes the architectural unit of the species. Parkiabiglobosa follows the Champagnat architectural model (plant with a mixed vegetative axis, the main stem is orthotropic in its proximal part and plagiotropic “collapses” in its distal part) before transiting to the Troll model in the adult and old stage (plant with a plagiotropic axis in the proximal and distal part, the trunk is built up by superimposing a collapsed relaying axis that gradually straightens, sympodial branching, amphitone and epitone, defined growth, mixed sexuality). This species has up to 6 orders of branching due to several reiterated sympodial structures forming arches. The architectural unit consists of three categories of axes. Its structure is established in three phases: initiation of development and establishment of the crown, then establishment of the architectural unit and finally duplication of the architecture by a series of partial and total reiterations.

The level of organisation of the species is 5: the phytomere, the growth unit or module, the axis, the architectural unit and the whole tree (reiterated complex). This information allows us to understand the sequential development of the overall structure of P. biglobosa. Its architectural unit is thus its smallest stem structure necessary to reach its sexual maturity stage and thus complete its life cycle by forming flowers and fruits. This study is an introduction to the architectural study of this species and the information provided will serve as a basis for further research into the architecture in relation to the sustainable use of this species.

Acknowledgements and Funding

This study was financed by the Ministry of Higher Education and Scientific Research of Côte d’Ivoire, the French Development Agency and the IRD (Institute of Research for Development) within the framework of PRESeD-CI 2 (Renewed Partnership for Research for Development in Côte d’Ivoire) and the C2D (Debt Relief Contract) of the AMRUGE-CI project (Support for the Modernisation and Reform of the Universities and Grandes Ecoles of Côte d’Ivoire) The authors would like to thank Yves CARAGLIO for his orientation and advice, and the Centre de Coopération International de Recherche Agronomique pour le Développement (CIRAD) for providing the technical equipment necessary for the study.

Author’s Declaration

Beda Innocent Adji took the experimental measurements, analyzed the data and wrote the article. Yves Caraglio provided ideas of the paper. Doffou Sélastique Akaffou, Véronique Letort, Mengzhen Kang, Xiujuan Wang, Marc Jaeger, Philippe De Reffye and Sylvie Annabel Sabatier supervised the work. Jerôme Duminil, Kouadio Henri Kouassi and Yao Patrice Houphouet are the project coordinators.


Plant architecture: the way in which the plant builds its structure at a given moment of its existence (mode of growth, branching, differentiation of axes and position of sexuality); this expression designates the series of structural characteristics expressed by a plant during its development (ontogeny) but also the method of study of the spatio-temporal organisation of the plant structure.

Architectural unit (AU): A very stable elementary architecture of a plant. Each plant species has a small and finite number of axis categories. All these categories, with their precise functions, constitute the Architectural Unit of the species.

Architectural model: a series of architectures that follow one another under stable and unconstrained ecological conditions, from germination to flowering, and which result from the expression of its genetic heritage. The typology of architectural patterns is based on the observation of four main groups of morphological characters: growth (rhythmic or continuous), branching (absence or presence, monopodial or sympodial, rhythmic, continuous or diffuse), direction of growth of the axes and position of sexuality. Each model corresponds to a particular combination of these architectural characteristics.

Growth unit: a portion of the stem established during an uninterrupted period of elongation.

Phyllotaxis: the arrangement of leaf organs along an axis. When a single leaf is borne at each node, the phyllotaxy is said to be alternate. In this case, if the successive leaves are positioned in the same plane and form an angle of 180˚ in pairs, the phyllotaxy is called distichous alternating. Conversely, if the leaves are arranged in several directions around the axis in a single virtual spiral, the phyllotaxy is called spiral alternation. When several leaves are inserted at the same node, the phyllotaxy is called whorled. A special case of whorled phyllotaxy is the opposite phyllotaxy where two leaves are inserted at the same node.

Monopodial development: axis built by a single apical meristem; the growth of an axis is ensured indefinitely by the same meristem or apical bud (mechanism of apical abscission without sexuality).

Pseudomonopodial development: non unique axis imitating monopodial development (masked sympod).

Sympodial development: not a single axis but a set of axes (succession of elementary axes with apical flowering or terminated by apical structures related to flowers, spines, tendrils, parenchyma domes, etc.); the construction of an axis is ensured by a succession of superimposed segments originating from different lateral buds (linear succession of elementary axes, each of which is built by a short-lived meristem).

Sympode: In sympodial or sympodial branching the terminal meristem of the supporting axis dies or is transformed into a structure that loses its ability to grow vegetatively. Further growth is then ensured by the functioning of one or more lateral meristems which will build as many lateral axes or relay axes, and the branched whole will be called a sympod. Depending on whether this branching leads to the formation of one, two or more relays, we speak respectively of a monochasial, dichasial or polychasial sympod.

Branching: the appearance of a branch on the trunk and, more generally, of an N + 1 axis on an N axis. The two axes, N and N + 1, have the same age in case of immediate branching; N + 1 is younger than N in case of delayed branching. This is the fact that a morphological unit of the plant body gives rise to one or more new units of the same fundamental nature as itself. The moment of development of a lateral branch is described as delayed or immediate, depending on whether or not it follows a resting phase after initiation of the lateral meristem by the terminal meristem. When all the axillary meristems of a stem give rise to a branch, the branching is said to be continuous; when the branches are grouped in distinct stages, the branching is said to be rhythmic; finally, when the arrangement of the branches is different from the two previous cases, the branching is said to be diffuse.

Rhythmicgrowth: axes that show a marked endogenous periodicity of elongation.

Orthotropic axis: when the direction of the axes is vertical.

Plagiotropic axis: when the direction of the axes is horizontal.

Ageotropic axis: when the direction of the axes is oblique (mixed between vertical and horizontal directions).

Cataphylls: the scar of the leaf outline that protected the bud before budburst.

Continuous growth: axes that do not show a marked periodicity of endogenous elongation and are said to be continuously growing.

Rhythmic growth: axes that show a marked periodicity of endogenous elongation.

Immediate or immediately developing shoots: growth without dormancy phase of the bud, the shoots develop on the shoot that is elongating and are generally located in the middle of this bearing shoot.

Delayed twigs or delayed developing shoots: dormancy (resting) phase of the lateral bud, the twigs develop the year after the elongation of the bearing shoot.

Hypopoduim: very long internode set in the case of an immediate shoot, length of internode between the base of the shoot and the first leaf.

Polycyclism: the annual shoot is composed of 2 or more growth units.

Monocyclism: the annual shoot is composed of a single growth unit.

Acrotony: preferential development of lateral axes at the top of a shoot or at the end of the growth unit.

Basitony: preferential development of twigs at the base of the bearing entity or growth unit.

Mesotony: the twigs develop in a privileged way in the median zone of the bearing unit.

Hypotony: twigs with a large diameter are distributed on the lower part of the branches.

Epitony: distribution of branches on the upper side of the axes and branches.

Amphitony: when the branches are carried preferentially in a horizontal plane on either side of the bearing axis.

NB: hypotony and amphitony are involved in the extension of the branches and may overlap.

Epicormic shoot (offshoot or supplanter): a shoot developing from a dormant lateral bud on the trunk or on main branches.

Reiteration: A reiterationis a youngtreegrowing on an oldsupporting axis. The position of reiterationis not predictable, itisdetermined by the presence of a local energyresource, or trauma. The reiteration has a dual function of exploiting light resources and ensuringresilience to trauma. It issaid to be total if itappears on the trunk of the tree and partial if itappears on other types of axis.

Forking: formation of two or more morphologically identical relay axes in a sympod from the apical trauma of a single axis.


*In this document, terms marked with an asterisk (*) are defined in a glossary appended to the article after the references in order to alleviate difficulties of understanding. Indeed, the vocabulary used differs from that commonly used by foresters.

Conflicts of Interest

The authors declare no conflicts of interest regarding the publication of this paper.


[1] Nicolini, E. (1998) Architecture et gradients morphogénétiques chez de jeunes hêtres (Fagus sylvatica L. Fagaceae) en milieu forestier. Canadian Journal of Botany, 76, 1232-1244.
[2] Heuret, P., Nicolini, E., Edelin, C. and Roggy, J.C. (2003) Approche architecturale pour l’étude des arbres de forêt tropicale humide guyanaise. Revue Forestière Francaise, 55, 158-178.
[3] Keller, R. (2016) Architecture de plantes au Bois de la Ville, le 23 avril 2016. Bulletin du Cercle vaudois de botanique, 46, 9-16.
[4] Hallé, F. and Keller, R. (2019) Mais d’où viennent les plantes? Actes Sud., 179 p.
[5] Barthélémy, D. and Caraglio, Y. (2007) Plant Architecture: A Dynamic, Multilevel and Comprehensive Approach to Plant Form, Structure and Ontogeny. Annals of Botany, 99, 375-407.
[6] Taugourdeau, O., Chaubert-Pereira, F., Sabatier, S. and Guédon, Y. (2012) Deciphering the Developmental Plasticity of Walnut Saplings in Relation to Climatic Factors and Light Environment. Journal of Experimental Botany, 62, 5283-5296.
[7] Sabatier, S., Caraglio, Y. and Drénou, C. (2014) L’architecture des arbres au service des forestiers. Innovations Agronomiques, 41, 119-128.
[8] Bathélemy, D. (1988) Architecture et sexualité chez quelques plantes tropicales: Le concept de floraison automatique. Thèse de doctorat, U.S.T.L. de Montpellier.
[9] Barthélemy, D. (1991) Levels of Organization and Repetition Phenomena in Seed Plants. Acta Biotheoretica, 39, 309-323.
[10] Barthélémy, D., Edelin, C. and Hallé, F. (1989) Architectural Concepts for Tropical Trees. In: Holm-Nielsen, L.B. and Balslev, H., Eds., Tropical Forests: Botanical Dynamics, Speciation and Diversity, Academic Press, Cambridge, 89-100.
[11] Barthélémy, D., Caraglio, Y. and Costes, E. (1997) Architecture, gradients morphogéné-tiques et age physiologique chez les végétaux. In: Bouchon, J., de Reffye, P.,Barthelemy, D. (Eds.), Modélisation et simulation de l’architecture des végétaux. INRA éditions, Paris, 89-136.
[12] Sabatier, S. (1999) Variabilité morphologique et architecturale de deux espèces de Noyers: Juglans regia L., Juglans nigra L. et deux Noyers hybrides interspecifiques. Thèse de Doctorat, Biologie végétale, sciences et techniques du Languedoc, Université de Montpellier II, 143 p.
[13] Lauri, P.é. (2007) Differentiation and Growth Traits Associated with Acrotony in the Apple Tree (Malus x domestica Rosaceae). American Journal of Botany, 94, 1273-1281.
[14] Rosati, A., Paoletti, A., Caporali, S. and Perri, E. (2013) The Role of Tree Architecture in Super High Density Olive Orchards. Scientia Horticulturae, 161, 24-29.
[15] Cilas, C., Bar-hen, A., Montagnon, C. and Godin, C. (2006) Definition of Architectural Ideotypes for Good Yield Capacity in Coffea canephora. Annals of Botany, 97, 405-411.
[16] Schnitzler, A. (2001) L’intérêt du modèle architectural dans l’analyse de la biodiversité forestière. Application à la gestion des réserves naturelles rhénanes. Rev. For. Fr. LIII numéro spécial. 217-225.
[17] Hallé, F. and Edelin, C. (1986) L’analyse architecturale des arbres. 6ème Colloque sur les recherches fruitières, Bordeaux, 10-11 décembre 1986, 5-19.
[18] Avana-Tientcheu, M.L.A., Keouna, S., Dongock, N.D. and Mouga, M.B. (2019) Structure des peuplements et potentiel de domestication de Parkia biglobosa dans la région de Tandjilé-Ouest (Tchad). International Journal of Biological and Chemical Sciences, 13, 219-236.
[19] Houndonougbo, J.S.H., Kassa, B., Mensah, S., Salako, V.K., Glèlè-Kakaï, R. and Assogbadjo, A.E. (2020) A Global Systematic Review on Conservation and Domestication of Parkia biglobosa (Jacq.) R. Br. ex G. Don, an Indigenous Fruit Tree Species in Sub-Sahara African Traditional Parklands: Current Knowledge and Future Directions. Genetic Resources and Crop Evolution, 67, 1051-1066.
[20] Adji, B.I., Akaffou, D.S. and Sabatier, S. (2021) Ecological Environment Effects on Germination and Seedling Morphology in Parkia biglobosa in Nursery (Côte d’Ivoire) and Greenhouse (France). International Journal of Horticulture, Agriculture and Food Science, 5, 2456-8635.
[21] Sina, S. (2006) Reproduction et Diversité Génétique chez Parkia biglobosa (Jacq.) G.Don. PhD Thesis, Wageningen University, Wageningen, 102 p.
[22] Adji, B.I., Akaffou, D.S., Kouassi, K.H., Houphouet, Y.P., Duminil, J. and Sabatier, S. (2021) The Effect of Four Abiotic Factors on Macro-Anatomical Markers Development in Parkia biglobosa, Jack, R. Br., 1830 (Fabaceae) Crown. American Journal of Plant Sciences, 12, 645-661.
[23] Hallé, F. and Oldeman, R.A.A. (1970) Essai sur l’architecture et la dynamique de croissance des arbres tropicaux. Masson, Paris, 178.
[24] Hallé, F., Oldeman, R.A.A. and Tomlinson, P.B. (1978) Tropical Trees and Forests: An Architectural Analysis. Springer-Verlag, Berlin.
[25] Edelin, C. (1984) L’architecture monopodiale: L’exemple de quelques arbres d’Asie tropicale. Thèse de Doctorat d’état, Université Montpellier II, Montpellier.
[26] Millan, M. (2016) Analyse de la variabilité des traits architecturaux des formes de croissance dans les communautés végétales. Thèse de Botanique, Université de Montpellier, Montpellier, 178 p.
[27] Oldeman, R.A.A. (1990) Forests: Elements of Silvology. Springer Verlag, Science & Business Media, Berlin, 624 p.
[28] Nicolini, E. (2000) Nouvelles observations sur la morphologie des unités de croissance du hêtre (Fagus sylvatica L.) Symétrie des pousses, reflet de la vigueur des arbres. Canadian Journal of Botany, 78, 77-87.
[29] Heuret, P., Barthélémy, D., Nicolini, E. and Atger, C. (2000) Analyse des composantes de la croissance en hauteur et de la formation du tronc chez le Chêne sessile (Quercus petraea (Matt.) Liebl.) (Fagaceae) en sylviculture dynamique. Canadian Journal of Botany, 78, 361-373.
[30] Anest, A., Tristan, C.D., Maurin, O., Millan, M., Edelin, C. and Tomlinson, K.W. (2021) Evolving the Structure: Climatic and Developmental Constraints on the Evolution of Plant Architecture. A Case Study in Euphorbia. New Phytologist, 231, 1278-1295.
[31] Calonnec, A. (2013) Faconner l’architecture végétale pour contrôler les maladies des plantes. Biofutur, 343, 37-42.
[32] Abidi, F. (2012) Effets de la qualité de la lumière sur l’élaboration de l’architecture du rosier buisson. Thèse de doctorat, l’Université de Tunis El Manar, Tunisie, 277 p.
[33] Tousignant, M.E. and Delorme, M. (2006) Connaitre le fonctionnement de la plante pour mieux gérer son environnement. Article paru dans Québec Vert (IQDHO) Adapté de Understanding Plant Growth: A Review of the Basics, conférence présentée lors de l’Ohio International Short Course 2005 par Paul A. Thomas et Bodie V. Pennisi, de l’Université de Georgie, et bonifié par l’équipe de l’IQDHO. 3 p.
[34] Dagba, E. (1974) Contribution à l’étude de l’influence du milieu sur la croissance et le développement de quelques cultivars de niébé, Vigna unguiculata (L) Walp. Thèse de doctorat, Sciences exactes et naturelles de l’Université de clermont-ferrand. 136 p.
[35] Mouravieff, I. (1958) Action de la lumière sur la cellule végétale. Bulletin de la Société Botanique de France, 105, 467-475.
[36] Lauri, P.E., Kelner, J.J., Trottier, J.C. and Costes, E. (2010) Insights into Secondary Growth in Perennial Plants: Its Unequal Spatial and Temporal Dynamics in the Apple (Malus domestica) Is Driven by Architectural Position and Fruit Load. Annals of Botany, 105, 607-616.
[37] Maranz, S. and Wiesman, Z. (2003) Evidence for Indigenous Selection and Distribution of the Shea Tree, Vitellaria paradoxa, and Its Potential Significance to Prevailing Parkland Savanna Tree Patterns in Sub-Saharan Africa North of the Equator. Journal of Global Biogeography, 30, 1505-1516.
[38] Soloviev, P., Niang, T.D., Gaye, A. and Totte, A. (2004) Variabilité des caractères physicochimiques des fruits de trois espèces ligneuses de cueillette, récoltés au Sénégal, Adansonia digitata, Balanites aegyptiaca et Tamarindus indica. Fruits, 59, 109-119.
[39] Salazar, R. and Quesada, M. (1987) Provenance Variation in Guazuma ulmifolia L. in Costa Rica. Commonwealth Forestry Review, 66, 317-324.
[40] Assogbadjo, A.E., Sinsin, B., Codjia, J.T.C. and Van Damme, P. (2005) Ecological Diversity and Pulp, Seed and Kernel Production of the Baobab (Adansonia digitata) in Benin. Belgian Journal of Botany, 138, 47-56.
[41] Assogbadjo, A. E., Kyndt, T., Sinsin, B., Gheysen, G. and Van Damme, P. (2006) Patterns of Genetic and Morphometric Diversity in Baobab (Adansonia digitata L.) Populations across Different Climatic Zones of Benin (West Africa) Annals of Botany, 97, 819-830.
[42] Nicolini, E., Beauchêne, J., Leudet de la Vallée, B., Ruelle, J., Mangenet, T. and Heuret, P. (2012) Dating Branch Growth Units in a Tropical Tree Using Morphological and Anatomical Markers: The Case of Parkia velutina Benoist (Mimosoïdeae). Annals of Forest Science, 69, 543-555.
[43] Sabatier, S., Barthélémy, D., Ducousso, I. and Germain, E. (1998) Modalités d’allongement et morphologie des pousses annuelles chez le noyer commun, Juglans regia L. “Lara” (Juglandaceae). Canadian Journal of Botany, 76, 1253-1264.
[44] Dambreville, A., Lauri, P.E., Normand, F. and Guedon, F. (2014) Analysing Growth and Development of Plants Jointly Using Developmental Growth Stages. Annals of Botany, 115, 93-105.
[45] Tondjo, K., Brancheriau, L., Sabatier, S., Kokutse, A.D., Kokou, K., Jaeger, M., De Refye, P. and Fourcaud, T. (2018) Stochastic Modelling of Tree Architecture and Biomass Allocation: Application to Teak (Tectona grandis L. f.), a Tree Species with Polycyclic Growth and Leaf Neoformation. Annals of Botany, 121, 1397-1410.
[46] Okoma, P., Akafou, S., De Refye, P., Hamon, P., Hamon, S., Konan, O., Kouassi, K.H., Legnate, H., Letort, V. and Sabatier, S. (2016) Estimation of Stem and Leaf Dry Biomass Using a Non-Destructive Method Applied to African Cofea Species. Agroforestry Systems, 92, 667-675.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.