[1]
|
M. A. Habib, S. A. M. Said and I. Al-Zaharna, “Thermodynamic Optimization of Reheat Regenerative Thermal Power Plants,” Applied Energy, Vol. 63, No. 1, 1999, pp. 17-34. doi:10.1016/S0306-2619(99)00017-3
|
[2]
|
M. K. Gupta and S. C. Kaushik, “Exergy Analysis and Investigation for Various Feed Water Heaters of Direct Steam Generation Solar-Thermal Power Plant,” Renewable Energy, Vol. 63, No. 6, 2010, pp. 1228-1235.
doi:10.1016/j.renene.2009.09.007
|
[3]
|
A. M. Bassily, “Modelling and Numerical Optimization of Dual- and Triple-Pressure Combined Cycles,” Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, Vol. 218, No. A2, 2004, pp. 97-109. doi:10.1243/095765004773644102
|
[4]
|
S. K. Tyagy, G. M. Chen and Q. Wang, “Thermodynamic Analysis and Parametric Study of an Irreversible Regenerative-Intercooled-Reheat Brayton Cycle,” International Journal of Thermal Science, Vol. 45, No. 8, 2006, pp. 829-840. doi:10.1016/j.ijthermalsci.2005.10.011
|
[5]
|
S. K. Tyagi, S. W. Wang and S. R. Park, “Performance Criteria on Different Pressure Ratios of an Irreversible Modified Complex Brayton Cycle,” Indian Journal of Pure & Applied Physics, Vol. 46, No. 8, 2008, pp. 565-574.
|
[6]
|
A. Bolattürk and M. Kanoglu, “An Investigation of Energy versus Exergy Based Optimization for Power Cycles,” Energy Exploration and Exploitation, Vol. 24, No. 4-5, 2006, pp. 243-257.
|
[7]
|
A. W. Culp, “Principles of Energy Conversion,” 2nd Edition, Mc Graw-Hill, Singapore, 1991.
|
[8]
|
L. C. Burmeister, “Elements of Thermal-Fluid System Design,” Prentice Hall, New Jersey, 1998.
|
[9]
|
W. F. Stoecker, “Design of Thermal Systems,” 3rd Edition, Mc Graw-Hill, New York, 1989.
|
[10]
|
J. A. Duffie and W. A. Beckman, “Solar Engineering of Thermal Processes,” Jhon Wiley and Sons, New York, 1980.
|
[11]
|
M. S. S?ylemez, “On the Optimum Heat Exchanger Sizing for Waste Heat Recovery,” Energy Conversion and Management, Vol. 41, No. 13, 2000, pp. 1419-1427.
|