// var cookie = cookies[i]; //得到某下标的cookies数组 // if (cookie.substring(0, cookieName.length + 2).trim() == cookieName.trim() + "=") {//如果存在该cookie的话就将cookie的值拿出来 // cookieValue = cookie.substring(cookieName.length + 2, cookie.length); // break // } // } // } // if (cookieValue != "" && cookieValue != null) {//如果存在指定的cookie值 // return false; // } // else { // // return true; // } // } // function ShowTwo(webUrl){ // alert("22"); // $.funkyUI({url:webUrl,css:{width:"600",height:"500"}}); // } //window.onload = pdfdownloadjudge;
JMMCE> Vol.2 No.3, May 2014
Share This Article:
Cite This Paper >>

Evaluation of the Influence of Fossil Fuel on Corrosion Resistance of Brass

Abstract Full-Text HTML XML Download Download as PDF (Size:719KB) PP. 176-181
DOI: 10.4236/jmmce.2014.23022    2,488 Downloads   3,234 Views   Citations
Author(s)    Leave a comment
Olayide Rasaq Adetunji, Peter Olaitan Aiyedun, Sidikat Ibiyemi Kuye, Dauda Adewale Lateef

Affiliation(s)

Mechanical Engineering Department, Federal University of Agriculture, Abeokuta, Nigeria.

ABSTRACT

Brass is an excellent material choice for use in most industrial and agricultural application. Brass offers much better thermal conductivity and corrosion resistance than carbon or even stainless steel. Brass is an excellent material for use in both hot and cold water industrial and residential system including those carrying portable water. This study was carried out to investigate and evaluate the influence of fossil fuel like petrol, kerosene and diesel on the corrosion performance of brass. The samples were prepared for the study by cutting brass into 1 cm2 coupons and soaking them in different small plastic containers containing petrol, kerosene and diesel. The corrosion rate of each sample for a specific period of immersion (120, 240, 360, and 480, 600 and 720 hours) was determined on average of three samples exposed under the same condition and test media in different container. The finding showed that brass is resistant to corrosion after long hours of contact in chosen liquid fossil fuels. Brass has the highest corrosion rate in petrol, followed by kerosene and least in diesel. The photomicrographs of the samples after ten days of immersion also confirmed this.

KEYWORDS

Corrosion Performance, Brass, Petrol, Diesel and Kerosene

Cite this paper

Adetunji, O. , Aiyedun, P. , Kuye, S. and Lateef, D. (2014) Evaluation of the Influence of Fossil Fuel on Corrosion Resistance of Brass. Journal of Minerals and Materials Characterization and Engineering, 2, 176-181. doi: 10.4236/jmmce.2014.23022.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Friel, J.J. and Townsend, H.E. (1983) Corrosion Resistance of Zinc and Zinc-Aluminium Alloy Coatings. Sheet Metal Industries, 60, 506-507.
[2] Goodwin, F.E. (1990) Zinc Base Steel Coating Systems: Metallurgy and Performance. In: Krauss, G., Ed., The Minerals, Metals and Materials Society.
[3] Bockris, J.O.M., Reddy, A.K.N. and Gamboa-Aldeco, M. (2000) Modern Electrochemistry. 2nd Edition, Kluwer Academic, Norwell.
[4] Cabrera-Sierra, R., García, I., Sosa, E., Oropeza, T. and González, I. (2000) Electrochemical Behavior of Carbon Steel in Alkaline sour Environments Measured by Electrochemical Impedance Spectroscopy. Electrochimica Acta, 46, 487-497. http://dx.doi.org/10.1016/S0013-4686(00)00567-3
[5] Stratmann, S.G. and Streckel, H. (1990) On the Atmospheric Corrosion of Metals Which Are Covered with Thin Electrolyte Layers. II. Experimental Results. Corrosion Science, 30, 697-714. http://dx.doi.org/10.1016/0010-938X(90)90033-2
[6] Townsend, H.E. and Fisher, T.W. (1982) Al-Zn Alloy Coated Steel Sheet and Wire, Metals Hand Book. 9th Edition, Cleaning, Finishing and Coating, Vol. 5, American Society for Metals, Metals Park, 646-649.
[7] Hamdy, A.S., Sa’eh, A., Shoeib, M.A. and Barakat, Y. (2007) Evaluation of Corrosion and Erosion Corrosion Resistance of Mild Steel in Sulfide Polluted NaCl Solution. Presented at the European Corrosion Congress, EuroCorr, Germany.
[8] Kharafi, F.M. (2008) Electrochemistry. Solid State Letter, 11, G15-G18.
http://dx.doi.org/10.1149/1.2832428
[9] Jekayinfa, S.O., Waheed, M.A., Adebiyi, K.A. and Adebiyi, F.T. (2005) Effect Cassava Fluid on Corrosion Performance of Mild Steel. Ant-Corrosion Methods and Materials, Emerald Group Publishing Limited, Vol. 50.
[10] Lawal, G.I., Amuda, M.O.H. and Fasuba, D.A. (2006) Inhibitive Behaviour of Tobacco Extract on Corrosion of Mild Steel in Acidic and Salty Media. NSE Technical Transaction, 41.

  
comments powered by Disqus
JMMCE Subscription
E-Mail Alert
JMMCE Most popular papers
Publication Ethics & OA Statement
JMMCE News
Frequently Asked Questions
Recommend to Peers
Recommend to Library
Contact Us

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.