[1]
|
I. J. Sharland, “Sources of Noise in Axial Flow Fans,” Journal of Sound and Vibration, Vol. 1, No. 3, 1964, pp. 303-322. doi:10.1016/0022-460X(64)90068-9
|
[2]
|
T. Fukano, Y. Kodama and Y. Senoo, “Noise Generated by Low Pressure Axial Flow Fans, I: Modeling of the Turbulent Noise,” Journal of Sound and Vibration, Vol. 50, No. 1, 1977, pp. 63-74.
doi:10.1016/0022-460X(77)90551-X
|
[3]
|
T. Fukano, A. A. Talukuder, T. Kozu and Y. Takamatsu, “Discrete Frequency Noise Generated from a Flat Plate in Parallel with a Uniform Oncoming Flow,” Memoirs of the Faculty of Engineering Kyushu University, Vol. 44, No. 1, 1984, pp. 19-39.
|
[4]
|
R. E. Longhouse, “Control of Tip-vortex Noise of Axial Flow Fans by Rotating Shrouds,” Journal of Sound and Vibration, Vol. 58, No. 2, 1978, pp. 201-214.
doi:10.1016/S0022-460X(78)80075-3
|
[5]
|
T. Fukano, Y. Takamatsu and Y. Kodama, “The Effects of Tip Clearance on the Noise of Low Pressure Axial and Mixed Flow Fans,” Journal of Sound and Vibration, Vol. 105, No. 2, 1986, pp. 291-308.
doi:10.1016/0022-460X(86)90158-6
|
[6]
|
F. Kameier and W. Neise, “Experimental Study of Tip Clearance Losses and Noise in Axial Turbomachines and Their Reduction, American Society of Mechanical Engineers,” Journal of Turbomachinery, Vol. 119, No. 3, 1997, pp. 460-471. doi:10.1115/1.2841145
|
[7]
|
T. Fukano and C.-M. Jang, “Tip Clearance Noise of Axial Flow Fans Operating at Design and Off-design Condition,” Journal of Sound and Vibration, Vol. 275, No. 3-5, 2004, pp. 1027-1050. doi:10.1016/S0022-460X(03)00815-0
|