|
[1]
|
A review of aluminum metal matrix composites: fabrication route, reinforcements, microstructural, mechanical, and corrosion properties
|
|
Journal of Materials …,
2024 |
|
|
|
[2]
|
FE simulation of uniaxial tensile behavior of SiC reinforced AA5083 alloy
|
|
Matéria (Rio de Janeiro),
2024 |
|
|
|
[3]
|
Mechano-tribological investigations of Al-% Wt. of boron nitride as metal-ceramic composites
|
|
AIP Conference …,
2024 |
|
|
|
[4]
|
Optimization on the electrical discharge machining (EDM) process parameters of aged AA7075/TiC metal matrix composites
|
|
Revista de …,
2023 |
|
|
|
[5]
|
Prediction of Wear Rate in Al/SiC Metal Matrix Composites Using a Neurosymbolic Artificial Intelligence (NSAI)-Based Algorithm
|
|
Lubricants,
2023 |
|
|
|
[6]
|
A Review of Research Progress on the Fretting Fatigue Mechanism and Protection Measures of Metal Matrix Composites
|
|
Coatings,
2023 |
|
|
|
[7]
|
Dry sliding wear response of aluminium matrix composites (AMCs): a critical review
|
|
Materials Research Express,
2023 |
|
|
|
[8]
|
Study of various types of aluminium alloy grade series and their effect on mechanical performance
|
|
Materials Today …,
2023 |
|
|
|
[9]
|
Effect of control factors on wear rate of the ceramic particulate filled metal alloy composites: a comparative analysis
|
|
Arabian Journal for …,
2023 |
|
|
|
[10]
|
Self-healing materials: fabrication technique and applications—a critical review
|
|
International Journal on Interactive …,
2023 |
|
|
|
[11]
|
SLIDING WEAR CHARACTERISTICS THROUGH AN ARTIFICIAL NEURAL NETWORK OF ALUMINA-ALUMINUM NANO-COMPOSITE PRODUCED BY NON …
|
|
Advances in Mechanics,
2022 |
|
|
|
[12]
|
Experimental investigation on tribological performance and development of wear prediction equation of aluminium composite at elevated temperatures
|
|
International Journal on …,
2022 |
|
|
|
[13]
|
Study of mechanical and wear behaviour of AA5083 graphene reinforced composites
|
|
KOVOVE MATERIALY …,
2022 |
|
|
|
[14]
|
Investigación del comportamiento al desgaste por deslizamiento en seco de materiales compuestos de matriz metálica AA5083/NANO-Al2O3
|
|
Revista de …,
2022 |
|
|
|
[15]
|
Comparative investigation of corrosion rate on A-36 steel with different coatings include ZnO and TiO2 nanoparticles using linear polarization resistance …
|
|
Revista de …,
2021 |
|
|
|
[16]
|
Microstructural and Tribological Behavior of 5083-TiB2 Cast Composites Fabricated by a Flux-Assisted Synthesis Technique
|
|
Advanced Materials …,
2021 |
|
|
|
[17]
|
Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques
|
|
2021 |
|
|
|
[18]
|
Development and characterization of aluminum matrix composite reinforced with continuous stainless-steel fibers
|
|
2021 |
|
|
|
[19]
|
Investigations on tensile fractography and wear characteristics of Al7O75-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques.
|
|
2021 |
|
|
|
[20]
|
The investigation of the effect of nano particles on dry sliding wear and corrosion behavior of Al-Mg/Al2O3 composites
|
|
surface topography …,
2021 |
|
|
|
[21]
|
Effect of tungsten carbide on Al6061/SiC hybrid metal matrix composites
|
|
Compos. Theory …,
2021 |
|
|
|
[22]
|
A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities
|
|
2020 |
|
|
|
[23]
|
VAKUMLU İNFİLTRASYONYA ÜRETİLEN AA 1050 ESASLI GNP+ TiB2 TAKVİYELİ HİBRİT KOMPOZİTLERİN ABRASİF AŞINMA DAVRANIŞLARININ İNCELENMESİ
|
|
2020 |
|
|
|
[24]
|
Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
|
|
2019 |
|
|
|
[25]
|
A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
|
|
2019 |
|
|
|
[26]
|
A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities
|
|
2019 |
|
|
|
[27]
|
Conventional stir casting versus ultrasonic assisted stir casting process: Mechanical and physical characteristics of AMCs
|
|
2019 |
|
|
|
[28]
|
Wear Performance Analysis of Aluminum Matrix Composites and Optimization of Process Parameters Using Statistical Techniques
|
|
2019 |
|
|
|
[29]
|
Nanocomposites of Al5083/SiC; strength and wear behaviors
|
|
2019 |
|
|
|
[30]
|
Investigation on Microstructure, Mechanical Properties and Fracture Mechanism of Trimodal SiC Reinforced Al5083/Al2024 Aluminum Alloy Based Nanocomposites Fabricated by Mechanical Milling and Hot Extrusion Processes
|
|
Transactions of the Indian Institute of Metals,
2018 |
|
|
|
[31]
|
Investigations on Wear Behaviour of Micro B4C Particulates Reinforced Al7010 Alloy Composites
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
|
[32]
|
Dry Sliding Wear Behaviour of Aluminium 6061-SiC-Graphite Particulates Reinforced Hybrid Composites
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
|
[33]
|
Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
|
[34]
|
Investigation on Hardness of Al 7075/Al2O3/SiCp Hybrid Composite Using Taguchi Technique
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[35]
|
Wear behavior of AA 5083/SiC nanoparticle metal matrix composite: Statistical analysis
|
|
2018 |
|
|
|
[36]
|
Investigations on Wear Behaviour of Micro B 4 C Particulates Reinforced Al7010 Alloy Composites
|
|
2018 |
|
|
|
[37]
|
A survey on effects of reinforcement on aluminium metal matrix composites
|
|
2017 |
|
|
|
[38]
|
Fabrication and Wear Analysis of Aluminium Matrix Composite Reinforced by SiC Micro and Nano Particles
|
|
2017 |
|
|
|
[39]
|
Influence of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite
|
|
IOP Conference Series: Materials Science and Engineering,
2017 |
|
|
|
[40]
|
Fabrication of A359 Alloy Reinforced With B4C Particulates & Characterization of Mechanical Properties
|
|
International Conference on Computational nad Experimental Methods in Mechanical Engineering,
2017 |
|
|
|
[41]
|
A REVIEW ON PROCESSING AND TRIBOLOGICAL PROPERTIES OF METAL MATRIX COMPOSITES
|
|
International Journal of Advancement in Engineering Technology Management & Applied Science,
2016 |
|
|
|
[42]
|
Dry Sliding Wear Behaviour of Aluminium Alloy 6061-Redmud Metal Matrix Composites by Stir Casting Method
|
|
IJCTA,
2016 |
|
|
|
[43]
|
Fabrication, Synthesis and Characterization of Particle Reinforced Aluminium Matrix Composite
|
|
2015 |
|
|
|
[44]
|
Effect of ruthenium complex dye sensitizer on photo-conversion efficiency of ZnO nanoparticles based dye sensitized solar cells
|
|
2015 |
|
|
|
[45]
|
Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
|
|
International Journal of Composite Materials and Matrices,
2015 |
|
|
|
[46]
|
Fabrication and Characterisation of Aluminium Metal Matrix Composite and its Buckling Analysis through FEM
|
|
ADVANCES IN MECHANICAL, AUTOMOBILE AND PRODUCTION ENGINEERING,
2015 |
|
|
|
[47]
|
A Review on Fabrication and Characterization of Aluminium Metal Matrix Composite (AMMC)
|
|
International Journal,
2014 |
|
|
|
[48]
|
Study of Abrasive Wear of Al-Zn-Mg Alloy by Taguchi Method
|
|
International Journal of Engineering Research and Technology,
2013 |
|
|
|
[49]
|
Optimization Of Process Parameters Using Failure Mode And Effect Analysis (Fmea) And Taguchi Method
|
|
2013 |
|
|
|
[50]
|
MECHANICAL PROPERTY IMPROVEMENT IN AL6061 REINFORCED WITH STEEL, GRAPHITE AND SIC USING TAGUCHI METHOD
|
|
|
|
|