Author(s)

Azizov Shuhrat Mamatovich, Uzoqov Farxodjon, Shermuhammad Alijonov, Hasanov Ahmadjon, Mirzakarimov Mirsharofiddin

Department Technological Machines and Equipment’s of Namangan Institute of Engineering and Technology 1, Namangan, Uzbekistan.

In the primary processing of cotton, it is important to increase the productivity of ginning and reduce the wear of working bodies. The working body of the genie is the working chamber, the saw cylinder and the rib grate. The main wear is on the saw cylinder shaft and saw teeth. The wear of these parts leads to additional material costs, as well as to a decrease in the quality of the fiber. The wear of the shaft is affected by the number of saws and the mass of raw cotton in the working chamber of the gin. To prevent wear of the saw cylinder, the article determines the optimal static load on the shaft by calculating saw gins consisting of 90, 100, 110, 120, 130 saws. An analysis of tables shows that maximum value to bending shows 120 and 130 saws cylinder, because shaft bending angles along the length appear. This leads to a 2% - 3% reduction in the distance between the saws, serves for the premature wear of the saw, the exit of short fibers.

Raw, Cotton, Shaft, Statically, Analysis, Saw, Gin

Shuhrat Mamatovich, A. , Farxodjon, U. , Alijonov, S. , Ahmadjon, H. and Mirsharofiddin, M. (2022) Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws. Engineering, 14, 329-338. doi: 10.4236/eng.2022.148026.