[1]
|
Clarification of the dispersion mechanism of cathode slurry of lithium-ion battery under effects of both poly vinylidene fluoride/carbon black ratio and mixing time
Particuology,
2024
DOI:10.1016/j.partic.2023.08.020
|
|
|
[2]
|
Energy-carbon scheduling optimization of battery factory back-end process based on time-of-use characteristics of power grid
2023 IEEE PELS Students and Young Professionals Symposium (SYPS),
2023
DOI:10.1109/SYPS59767.2023.10268168
|
|
|
[3]
|
A critical review of future aspects of digitalization next generation Li-ion batteries manufacturing process
Journal of Energy Storage,
2023
DOI:10.1016/j.est.2023.109209
|
|
|
[4]
|
Lamellar multi-arch microstructure of Co3O4/N-CNTs-CNF composites as anodes for high-performance flexible lithium-ion batteries
Journal of Energy Storage,
2023
DOI:10.1016/j.est.2023.109481
|
|
|
[5]
|
A review of research needs in nondestructive evaluation for quality verification in electric vehicle lithium-ion battery cell manufacturing
Journal of Power Sources,
2023
DOI:10.1016/j.jpowsour.2023.232742
|
|
|
[6]
|
Processing of Aqueous Graphite–Silicon Oxide Slurries and Its Impact on Rheology, Coating Behavior, Microstructure, and Cell Performance
Batteries,
2023
DOI:10.3390/batteries9120581
|
|
|
[7]
|
Classification of battery slurry by flow signal processing via echo state network model
Rheologica Acta,
2023
DOI:10.1007/s00397-023-01404-0
|
|
|
[8]
|
Surface Engineering Based on Conductive Agent Dispersion Uniformity: Strategies toward Performance Consistency of Lithium-Ion Batteries
Langmuir,
2023
DOI:10.1021/acs.langmuir.3c03170
|
|
|
[9]
|
Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries
Batteries,
2023
DOI:10.3390/batteries9020082
|
|
|
[10]
|
A review of research needs in nondestructive evaluation for quality verification in electric vehicle lithium-ion battery cell manufacturing
Journal of Power Sources,
2023
DOI:10.1016/j.jpowsour.2023.232742
|
|
|
[11]
|
Advanced manufacturing approaches for electrochemical energy storage devices
International Materials Reviews,
2023
DOI:10.1080/09506608.2022.2086388
|
|
|
[12]
|
A review of research in the Li-ion battery production and reverse supply chains
Journal of Energy Storage,
2023
DOI:10.1016/j.est.2023.107622
|
|
|
[13]
|
Stress and Manufacturability in Solid-State Lithium-Ion Batteries
International Journal of Precision Engineering and Manufacturing-Green Technology,
2023
DOI:10.1007/s40684-023-00519-2
|
|
|
[14]
|
Emerging Atomic Layer Deposition for the Development of High-Performance Lithium-Ion Batteries
Electrochemical Energy Reviews,
2023
DOI:10.1007/s41918-023-00192-8
|
|
|
[15]
|
Classification of battery slurry by flow signal processing via echo state network model
Rheologica Acta,
2023
DOI:10.1007/s00397-023-01404-0
|
|
|
[16]
|
A Solvent-Free Process Enabled by Polytetrafluoroethlyene/Carbon Black Composites for Fabricating Electrodes for Lithium-Ion Batteries with a High Volumetric Energy
Journal of The Electrochemical Society,
2023
DOI:10.1149/1945-7111/acf525
|
|
|
[17]
|
A review of research in the Li-ion battery production and reverse supply chains
Journal of Energy Storage,
2023
DOI:10.1016/j.est.2023.107622
|
|
|
[18]
|
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Advanced Energy Materials,
2022
DOI:10.1002/aenm.202102904
|
|
|
[19]
|
Advanced manufacturing approaches for electrochemical energy storage devices
International Materials Reviews,
2022
DOI:10.1080/09506608.2022.2086388
|
|
|
[20]
|
Understanding slurry formulations to guide solution-processing of solid electrolytes
Journal of Power Sources,
2022
DOI:10.1016/j.jpowsour.2022.231894
|
|
|
[21]
|
Data Specifications for Battery Manufacturing Digitalization: Current Status, Challenges, and Opportunities
Batteries & Supercaps,
2022
DOI:10.1002/batt.202200224
|
|
|
[22]
|
Tailored Digitalization in Electrode Manufacturing: The Backbone of Smart Lithium‐Ion Battery Cell Production
Energy Technology,
2022
DOI:10.1002/ente.202200657
|
|
|
[23]
|
Model fluid for coating flows of Li-ion battery anode slurry
Journal of Materials Science,
2022
DOI:10.1007/s10853-022-07615-9
|
|
|
[24]
|
Roadmap on Li-ion battery manufacturing research
Journal of Physics: Energy,
2022
DOI:10.1088/2515-7655/ac8e30
|
|
|
[25]
|
Rheological interpretation of the structural change of LiB cathode slurry during the preparation process
JCIS Open,
2022
DOI:10.1016/j.jciso.2021.100038
|
|
|
[26]
|
Process‐Structure‐Formulation Interactions for Enhanced Sodium Ion Battery Development: A Review
ChemPhysChem,
2022
DOI:10.1002/cphc.202100860
|
|
|
[27]
|
Current and future lithium-ion battery manufacturing
iScience,
2021
DOI:10.1016/j.isci.2021.102332
|
|
|
[28]
|
Advanced electrode processing of lithium ion batteries: A review of powder technology in battery fabrication
Particuology,
2021
DOI:10.1016/j.partic.2020.12.003
|
|
|
[29]
|
Viscosity Analysis of Battery Electrode Slurry
Polymers,
2021
DOI:10.3390/polym13224033
|
|
|
[30]
|
A Model for Investigating Sources of Li-Ion Battery Electrode Heterogeneity: Part I. Electrode Drying and Calendering Processes
Journal of The Electrochemical Society,
2021
DOI:10.1149/1945-7111/ac0bf1
|
|
|
[31]
|
Machine learning-based assessment of the impact of the manufacturing process on battery electrode heterogeneity
Energy and AI,
2021
DOI:10.1016/j.egyai.2021.100090
|
|
|
[32]
|
Opportunities for the State-of-the-Art Production of LIB Electrodes—A Review
Energies,
2021
DOI:10.3390/en14051406
|
|
|
[33]
|
The Role of Pilot Lines in Bridging the Gap Between Fundamental Research and Industrial Production for Lithium‐Ion Battery Cells Relevant to Sustainable Electromobility: A Review
Energy Technology,
2021
DOI:10.1002/ente.202100132
|
|
|
[34]
|
New insight for electricity amplification in microbial fuel cells (MFCs) applying magnesium hydroxide coated iron nanoparticles
Energy Conversion and Management,
2021
DOI:10.1016/j.enconman.2021.114877
|
|
|
[35]
|
Machine learning-based assessment of the impact of the manufacturing process on battery electrode heterogeneity
Energy and AI,
2021
DOI:10.1016/j.egyai.2021.100090
|
|
|
[36]
|
Optimized Printed Cathode Electrodes for High Performance Batteries
Energy Technology,
2021
DOI:10.1002/ente.202000805
|
|
|
[37]
|
Surface‐Functionalized Graphite as Long Cycle Life Anode Materials for Lithium‐Ion Batteries
ChemElectroChem,
2020
DOI:10.1002/celc.201902098
|
|
|
[38]
|
High Energy Li‐Ion Electrodes Prepared via a Solventless Melt Process
Batteries & Supercaps,
2020
DOI:10.1002/batt.201900187
|
|
|
[39]
|
The Effect of Crystalline Microstructure of PVDF Binder on Mechanical and Electrochemical Performance of Lithium-Ion Batteries Cathode
Zeitschrift für Physikalische Chemie,
2020
DOI:10.1515/zpch-2018-1343
|
|
|
[40]
|
Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders
ACS Applied Materials & Interfaces,
2020
DOI:10.1021/acsami.0c20105
|
|
|
[41]
|
Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries
ACS Applied Materials & Interfaces,
2020
DOI:10.1021/acsami.0c10823
|
|
|
[42]
|
Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders
ACS Applied Materials & Interfaces,
2020
DOI:10.1021/acsami.0c20105
|
|
|
[43]
|
High Energy Li−Ion Electrodes Prepared via a Solventless Melt Process
Batteries & Supercaps,
2020
DOI:10.1002/batt.201900187
|
|
|
[44]
|
Surface‐Functionalized Graphite as Long Cycle Life Anode Materials for Lithium‐Ion Batteries
ChemElectroChem,
2020
DOI:10.1002/celc.201902098
|
|
|
[45]
|
The Effect of Crystalline Microstructure of PVDF Binder on Mechanical and Electrochemical Performance of Lithium-Ion Batteries Cathode
Zeitschrift für Physikalische Chemie,
2020
DOI:10.1515/zpch-2018-1343
|
|
|
[46]
|
Optimized Printed Cathode Electrodes for High Performance Batteries
Energy Technology,
2020
DOI:10.1002/ente.202000805
|
|
|
[47]
|
Strategy for Long Cycling Performance of Graphite/LiNi1/3Mn1/3Co1/3O2 Full-Cell Through High-Efficiency Slurry Preparation
Journal of The Electrochemical Society,
2020
DOI:10.1149/1945-7111/abd1f6
|
|
|
[48]
|
Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries
ACS Applied Materials & Interfaces,
2020
DOI:10.1021/acsami.0c10823
|
|
|
[49]
|
Effect of calendering on rate performance of Li4Ti5O12 anodes for lithium-ion batteries
Journal of Electroceramics,
2020
DOI:10.1007/s10832-020-00227-2
|
|
|
[50]
|
Recycled silicon powder coated on carbon paper used as the anode of lithium ion batteries
New Carbon Materials,
2019
DOI:10.1016/S1872-5805(19)60007-7
|
|
|
[51]
|
Nano-Energetic Materials
Energy, Environment, and Sustainability,
2019
DOI:10.1007/978-981-13-3269-2_7
|
|
|
[52]
|
The Physics of Semiconductor Devices
Springer Proceedings in Physics,
2019
DOI:10.1007/978-3-319-97604-4_184
|
|
|
[53]
|
On the study of mixing and drying on electrochemical performance of spinel LiMn2O4 cathodes
Journal of Renewable and Sustainable Energy,
2019
DOI:10.1063/1.5051583
|
|
|
[54]
|
Lithium-Ion Battery Chemistries
2019
DOI:10.1016/B978-0-12-814778-8.09996-8
|
|
|
[55]
|
Microstructural Influence on Electrochemical Properties of LiFePO4/C/Reduced Graphene Oxide Composite Cathode
Russian Journal of Electrochemistry,
2019
DOI:10.1134/S1023193519060120
|
|
|
[56]
|
Composite Electrode Ink Formulation for All Solid-State Batteries
Journal of The Electrochemical Society,
2019
DOI:10.1149/2.0141914jes
|
|
|
[57]
|
Lithium-Ion Battery Chemistries
2019
DOI:10.1016/B978-0-12-814778-8.09996-8
|
|
|
[58]
|
On the study of mixing and drying on electrochemical performance of spinel LiMn2O4 cathodes
Journal of Renewable and Sustainable Energy,
2019
DOI:10.1063/1.5051583
|
|
|
[59]
|
Percolation behaviors of model carbon black pastes
Soft Matter,
2018
DOI:10.1039/C8SM01591K
|
|
|
[60]
|
Poly(styrene–butene/ethylene–styrene): A New Polymer Binder for High-Performance Printable Lithium-Ion Battery Electrodes
ACS Applied Energy Materials,
2018
DOI:10.1021/acsaem.8b00528
|
|
|
[61]
|
Current status and challenges for automotive battery production technologies
Nature Energy,
2018
DOI:10.1038/s41560-018-0130-3
|
|
|
[62]
|
Current status and challenges for automotive battery production technologies
Nature Energy,
2018
DOI:10.1038/s41560-018-0130-3
|
|
|
[63]
|
Printed Batteries
2018
DOI:10.1002/9781119287902.ch3
|
|
|
[64]
|
Current status and challenges for automotive battery production technologies
Nature Energy,
2018
DOI:10.1038/s41560-018-0130-3
|
|
|
[65]
|
Investigation of the Use of a Bio-Derived Solvent for Non-Solvent-Induced Phase Separation (NIPS) Fabrication of Polysulfone Membranes
Membranes,
2018
DOI:10.3390/membranes8020023
|
|
|
[66]
|
Pulvertechnisch hergestellte Werkstoffe für die Elektromobilität — Teil 1: Batterien
Keramische Zeitschrift,
2018
DOI:10.1007/s42410-018-0031-x
|
|
|
[67]
|
Poly(styrene–butene/ethylene–styrene): A New Polymer Binder for High-Performance Printable Lithium-Ion Battery Electrodes
ACS Applied Energy Materials,
2018
DOI:10.1021/acsaem.8b00528
|
|
|
[68]
|
Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes
Journal of Micro and Nano-Manufacturing,
2017
DOI:10.1115/1.4037769
|
|
|
[69]
|
All-Printed, Stretchable Zn-Ag2
O Rechargeable Battery via Hyperelastic Binder for Self-Powering Wearable Electronics
Advanced Energy Materials,
2017
DOI:10.1002/aenm.201602096
|
|
|
[70]
|
Recent Trends in Materials and Devices
Springer Proceedings in Physics,
2017
DOI:10.1007/978-3-319-29096-6_30
|
|
|
[71]
|
Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation
Energy Technology,
2017
DOI:10.1002/ente.201600536
|
|
|
[72]
|
Morphological Structure Characterizations in Lithium-Ion Battery (LIB) Slurry under Shear Rotational Conditions by On-Line Dynamic Electrochemical Impedance Spectroscopy (EIS) Method
Journal of The Electrochemical Society,
2017
DOI:10.1149/2.0391712jes
|
|
|
[73]
|
Scalable Dry Printing Manufacturing to Enable Long-Life and High Energy Lithium-Ion Batteries
Advanced Materials Technologies,
2017
DOI:10.1002/admt.201700106
|
|
|
[74]
|
Understanding Interfacial-Energy-Driven Dry Powder Mixing for Solvent-Free Additive Manufacturing of Li-Ion Battery Electrodes
Advanced Materials Interfaces,
2017
DOI:10.1002/admi.201700570
|
|
|
[75]
|
All‐Printed, Stretchable Zn‐Ag2O Rechargeable Battery via Hyperelastic Binder for Self‐Powering Wearable Electronics
Advanced Energy Materials,
2017
DOI:10.1002/aenm.201602096
|
|
|
[76]
|
Understanding Interfacial‐Energy‐Driven Dry Powder Mixing for Solvent‐Free Additive Manufacturing of Li‐Ion Battery Electrodes
Advanced Materials Interfaces,
2017
DOI:10.1002/admi.201700570
|
|
|
[77]
|
Scalable Dry Printing Manufacturing to Enable Long‐Life and High Energy Lithium‐Ion Batteries
Advanced Materials Technologies,
2017
DOI:10.1002/admt.201700106
|
|
|
[78]
|
Improvement of Lithium‐Ion Battery Performance by Two‐Layered Slot–Die Coating Operation
Energy Technology,
2017
DOI:10.1002/ente.201600536
|
|
|
[79]
|
Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties
Journal of Power Sources,
2016
DOI:10.1016/j.jpowsour.2016.02.014
|
|
|
[80]
|
Conveying Advanced Li‐ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills
Advanced Energy Materials,
2016
DOI:10.1002/aenm.201600655
|
|
|
[81]
|
Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Scientific Reports,
2016
DOI:10.1038/srep23150
|
|
|
[82]
|
Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties
Journal of Power Sources,
2016
DOI:10.1016/j.jpowsour.2016.02.014
|
|
|
[83]
|
Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating
Journal of Energy Storage,
2016
DOI:10.1016/j.est.2015.12.008
|
|
|
[84]
|
Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Scientific Reports,
2016
DOI:10.1038/srep23150
|
|
|
[85]
|
Conveying Advanced Li-ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills
Advanced Energy Materials,
2016
DOI:10.1002/aenm.201600655
|
|
|
[86]
|
Viscoelastic Analysis of Dispersion Process of Highly Concentrated Suspension for LiB Cathodes
Journal of the Society of Powder Technology, Japan,
2016
DOI:10.4164/sptj.53.371
|
|
|