Stress Concentration Factor; Plates with Circular Hole; Finite Element Analysis - Articles

Three-Dimensional Finite Elemental Analysis of Bone Stress near an Implant Placed at the Border between Mandible and Fibular Graft in Mandibular Reconstruction (Articles)

Yukawa Ken, Tachikawa Noriko, Kasugai Shohei

Open Journal of Regenerative Medicine Vol.4 No.4，November 13, 2015

DOI: 10.4236/ojrm.2015.44005 4,642 Downloads 6,099 Views Citations
AtDREB2A-CA Influences Root Architecture and Increases Drought Tolerance in Transgenic Cotton (Articles)

Maria Eugênia Lisei-de-Sá, Fabricio B. M. Arraes, Giovani G. Brito, Magda A. Beneventi, Isabela T. Lourenço-Tessutti, Angelina M. M. Basso, Regina M. S. Amorim, Maria C. M. Silva, Muhammad Faheem, Nelson G. Oliveira, Junya Mizoi, Kazuko Yamaguchi-Shinozaki, Maria Fatima Grossi-de-Sa

Agricultural Sciences Vol.8 No.10，October 30, 2017

DOI: 10.4236/as.2017.810087 1,243 Downloads 3,020 Views Citations
This article belongs to the Special Issue on Cotton Production
Slope Stability Considering the Top Building Load (Articles)

Micke Didit, Xiwen Zhang, Weidong Zhu

Open Journal of Civil Engineering Vol.12 No.3，July 29, 2022

DOI: 10.4236/ojce.2022.123017 225 Downloads 1,574 Views Citations
Contribution to Development of Reliability and Optimization Methods Applied to Mechanical Structures (Articles)

Siham Ouhimmou, Abdelkhalak El Hami, Rachid Ellaia, Mohamed Tkiouat

Applied Mathematics Vol.4 No.1，January 25, 2013

DOI: 10.4236/am.2013.41005 4,282 Downloads 6,682 Views Citations
Finite Element Analysis of the Ramberg-Osgood Bar (Articles)

Dongming Wei, Mohamed B. M. Elgindi

American Journal of Computational Mathematics Vol.3 No.3，August 20, 2013

DOI: 10.4236/ajcm.2013.33030 6,337 Downloads 9,315 Views Citations
Effective Yield Strength for Material Powder Consolidated at Stage II Compaction (Articles)

Larbi Siad, Sophie Gangloﬀ

World Journal of Mechanics Vol.4 No.9，September 29, 2014

DOI: 10.4236/wjm.2014.49028 3,317 Downloads 4,213 Views Citations
ANN Based Predictive Modelling of Weld Shape and Dimensions in Laser Welding of Galvanized Steel in Butt Joint Configurations (Articles)

Laurent Jacques, Abderrazak El Ouafi

J. of Minerals and Materials Characterization and Eng. Vol.6 No.3，May 10, 2018

DOI: 10.4236/jmmce.2018.63022 946 Downloads 1,951 Views Citations
Analysis of the Behavior of a Square Plate in Free Vibration by FEM in Ansys (Articles)

Pascal Kuate Nkounhawa, Dieunedort Ndapeu, Bienvenu Kenmeugne, Tibi Beda

World Journal of Mechanics Vol.10 No.2，February 28, 2020

DOI: 10.4236/wjm.2020.102002 1,089 Downloads 4,702 Views Citations
Finite Element Study on Mechanical Properties of Recycled Concrete Filled Square Steel Tubular Short Columns (Articles)

Qianpeng Nie

Open Access Library Journal Vol.9 No.3，March 22, 2022

DOI: 10.4236/oalib.1108544 102 Downloads 620 Views Citations
Innovative Techniques Unveiled in Advanced Sheet Pile Curtain Design (Articles)

Peace Sèna Hounkpe, Guy Oyéniran Adéoti, Patrick Oniakitan Mondoté, Éric Adéchina Alamou

Open Journal of Civil Engineering Vol.14 No.1，January 15, 2024

DOI: 10.4236/ojce.2024.141001 1,335 Downloads 2,054 Views Citations
The Finite Volume Element Method for Time-Fractional Nonlinear Fourth-Order Diffusion Equation with Time Delay (Articles)

Anran Li, Qing Yang

Engineering Vol.17 No.1，January 21, 2025

DOI: 10.4236/eng.2025.171004 41 Downloads 211 Views Citations
Continuous Estimation of Stress Using Physiological Signals during a Car Race (Articles)

Wen Wen, Daisuke Tomoi, Hiroshi Yamakawa, Shunsuke Hamasaki, Kaoru Takakusaki, Qi An, Yusuke Tamura, Atsushi Yamashita, Hajime Asama

Psychology Vol.8 No.7，May 19, 2017

DOI: 10.4236/psych.2017.87064 1,802 Downloads 3,091 Views Citations
Hybrid Post-Processing Procedure for Displacement-Based Plane Elements (Articles)

Xiaoming Chen, Song Cen, Jianyun Sun, Yungui Li

Journal of Applied Mathematics and Physics Vol.1 No.6，November 28, 2013

DOI: 10.4236/jamp.2013.16004 3,649 Downloads 5,202 Views Citations
Micromechanical Analysis of Thermal Expansion Coefficients (Articles)

Christian Karch

Modeling and Numerical Simulation of Material Science Vol.4 No.3，July 10, 2014

DOI: 10.4236/mnsms.2014.43012 9,546 Downloads 13,221 Views Citations
Comprehention of Coils Overlappings Effects —Magnetic Resonance Imaging (Articles)

Mohammadreza Shiravi Khoozani, Homayoun Meshgin Kelk, Abolfazl Shiravi Khoozani

Open Access Library Journal Vol.2 No.1，January 28, 2015

DOI: 10.4236/oalib.1100945 1,729 Downloads 2,549 Views Citations
Towards a Micromechanical Understanding of Landslides—Aiming at a Combination of Finite and Discrete Elements with Minimal Number of Degrees of Freedom (Articles)

Jan Mueller, Akira Kyotani, Hans-Georg Matuttis

Journal of Applied Mathematics and Physics Vol.8 No.9，September 14, 2020

DOI: 10.4236/jamp.2020.89134 396 Downloads 1,129 Views Citations
This article belongs to the Special Issue on Finite Element Analysis method and Its Applications
Development of Coatings Marine Antifouling Based on Perfluorinated Surfactants Synthesis and Physicochemical Study (Articles)

Abdelkader Bacha, Rachid Méghabar

J. of Surface Engineered Materials and Advanced Technology Vol.4 No.2，April 18, 2014

DOI: 10.4236/jsemat.2014.42012 4,656 Downloads 6,546 Views Citations
Influence of Hartmann Number on Convective Flow of Maxwell Fluid between Two Hot Parallel Plates through Porous Medium Subject to Arbitrary Shear Stress at the Boundary (Articles)

Adnan Ahmad, Zaib Un Nisa, Mudassar Nazar, Muhammad Imran Asjad, Mushtaq Ahmad

Journal of Applied Mathematics and Physics Vol.10 No.1，January 21, 2022

DOI: 10.4236/jamp.2022.101012 210 Downloads 1,017 Views Citations
Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling (Articles)

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210097 8,015 Downloads 15,457 Views Citations
Comparison of fatigue behaviour of eight different hip stems: a numerical and experimental study (Articles)

Mahmut Pekedis, Hasan Yildiz

Journal of Biomedical Science and Engineering Vol.4 No.10，October 17, 2011

DOI: 10.4236/jbise.2011.410080 7,580 Downloads 13,285 Views Citations

<...8910 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies