Aluminum-Silicon Alloy; Boundary Lubrication; Casting; Surface Roughness; Adhesive Wear - Articles

Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO₂ Coating on Commercially Pure Ti Discs (Articles)

Sinem Yeniyol, Bahadır Kepenek, Ayhan Bilir, Ali Fuat Çakır, Nilüfer Bölükbaşı, Mefail Yeniyol, Tayfun Özdemir

Materials Sciences and Applications Vol.5 No.5，March 31, 2014

DOI: 10.4236/msa.2014.55029 3,415 Downloads 5,387 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7，July 8, 2014

DOI: 10.4236/msce.2014.27004 2,501 Downloads 4,019 Views Citations
Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing (Articles)

Koji Araki, Ryuji Takeda, Haruo Sudo, Koji Izunome, Xinwei Zhao

J. of Surface Engineered Materials and Advanced Technology Vol.4 No.5，August 6, 2014

DOI: 10.4236/jsemat.2014.45028 4,688 Downloads 6,046 Views Citations
This article belongs to the Special Issue on Surface Modification
Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation (Articles)

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl

Modeling and Numerical Simulation of Material Science Vol.4 No.4，October 10, 2014

DOI: 10.4236/mnsms.2014.44017 5,512 Downloads 7,038 Views Citations
Surface Roughness Modification of Free Standing Single Crystal Silicon Microstructures Using KrF Excimer Laser Treatment for Mechanical Performance Improvement (Articles)

Mohamed Elwi Mitwally, Toshiyuki Tsuchiya, Osamu Tabata, Sherif Sedky

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.1，January 6, 2015

DOI: 10.4236/jsemat.2015.51004 3,618 Downloads 4,711 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Studying the Preheating Effect on Certain Mechanical Properties of the Coating Layer by Vacuum Ion Plasma Coating (Articles)

Abdul Jaleel Hamad Majeed

Modern Mechanical Engineering Vol.5 No.4，November 11, 2015

DOI: 10.4236/mme.2015.54010 4,349 Downloads 5,380 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 3,980 Downloads 7,104 Views Citations
Neural Network Modeling and Prediction of Surface Roughness in Machining Aluminum Alloys (Articles)

N. Fang, N. Fang, P. Srinivasa Pai, N. Edwards

Journal of Computer and Communications Vol.4 No.5，May 13, 2016

DOI: 10.4236/jcc.2016.45001 2,957 Downloads 4,600 Views Citations
Influence of Abrasive Waterjet Machining Parameters on the Surface Texture Quality of Carrara Marble (Articles)

Mohammad S. Alsoufi, Dhia K. Suker, Mohammed W. Alhazmi, Sufyan Azam

J. of Surface Engineered Materials and Advanced Technology Vol.7 No.2，April 20, 2017

DOI: 10.4236/jsemat.2017.72003 2,442 Downloads 5,140 Views Citations
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2，April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,435 Downloads 3,490 Views Citations
Difference in Surface Roughness of Ethylene-Vinyl-Acetate Sheet before and after Application of Finishing Liquid (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.9 No.13，December 3, 2018

DOI: 10.4236/msa.2018.913071 971 Downloads 1,937 Views Citations
Introduction of Multiscaled Longitudinal Vortices by Fractal-Patterned Surface Roughness (Articles)

Manami Kosuda, Yoshihiro Kubota, Masao Yokoyama, Osamu Mochizuki

Journal of Flow Control, Measurement & Visualization Vol.7 No.2，April 28, 2019

DOI: 10.4236/jfcmv.2019.72010 882 Downloads 1,842 Views Citations
Simulation Analysis of Surface Roughness for Milling Process (Articles)

Bai Liu, Jixuan Yuan, Zhenjiu Zhang

Natural Science Vol.11 No.5，May 9, 2019

DOI: 10.4236/ns.2019.115014 1,091 Downloads 2,482 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1，January 20, 2021

DOI: 10.4236/msa.2021.121002 783 Downloads 2,807 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
Relationship between Lingual Papilla Surface Roughness and Oral Condition in Elderly Individuals (Articles)

Yoko Tada, Junichi Karaki, Junpei Kubota, Yasuaki Kakinoki

Open Journal of Stomatology Vol.11 No.2，February 5, 2021

DOI: 10.4236/ojst.2021.112007 369 Downloads 1,708 Views Citations
Improvement in Surface Roughness and Hardness for Carbon Steel by Slide Burnishing Process (Articles)

Hirotaka Kato, Wataru Hirokawa, Yoshikazu Todaka, Kazufumi Yasunaga

Materials Sciences and Applications Vol.12 No.5，May 8, 2021

DOI: 10.4236/msa.2021.125011 1,288 Downloads 3,326 Views Citations
This article belongs to the Special Issue on Material Processing
Risk Analysis of Cavitation in Hydraulic Structures (Articles)

Gabriel Echávez

World Journal of Engineering and Technology Vol.9 No.3，August 11, 2021

DOI: 10.4236/wjet.2021.93043 322 Downloads 1,574 Views Citations
A Qualitative Approach to Understanding the Role of DEM Error and Climate Change Impact on Long-Term Floodplain Inundation Mapping (Articles)

Mohammad Hafizur Rahman, Seidou Ousmane, Sohel Rana

International Journal of Geosciences Vol.16 No.8，August 15, 2025

DOI: 10.4236/ijg.2025.168025 28 Downloads 127 Views Citations
The Impact of Vertical Scaling on the Estimation of Fractal Dimension of Slope Failures in Opencast Mine (Articles)

Dina Kon, Jisen Shu, Dave Mbako

Open Journal of Civil Engineering Vol.15 No.2，June 30, 2025

DOI: 10.4236/ojce.2025.152014 44 Downloads 216 Views Citations
Dry Sliding Wear Behaviour of SiC Particles Reinforced Zinc-Aluminium (ZA43) Alloy Metal Matrix Composites (Articles)

Rajaneesh N. Marigoudar, Kanakuppi Sadashivappa

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105031 5,921 Downloads 8,761 Views Citations

<...345 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies