[1]
|
J K M Kwok, S C Lim, “High speed tribological properties of Al/SiC composites: I
Frictional and wear rate characteristics”, Composites Science and Technology, 1999,
59, 55 – 63.
|
[2]
|
J K M Kwok, S C Lim, “High speed tribological properties of Al/SiC composites: II
wear mechanisms”, Composites Science and Technology, 1999, 59, 65 – 75.
|
[3]
|
G Ranganath, S C Sharma, M Krishna, “Dry sliding wear of garnet reinforced
zinc/aluminium metal matrix composites”, Wear, 2001, 251, 1408 – 1413
|
[4]
|
S C Lim, M Gupta, L Ren, J K M Kwok, “The tribological properties of Al-Cu/SiC
metal matrix composites fabricated using the rheocasting technique”, Journal of
material processing and Technology, 1999, 90, 591-596
|
[5]
|
Gencaga Purcek, Temel Savaskan, Samuel Murphy, “Dry sliding friction and wear
properties of zinc based alloy”, Wear, 2002, 252, 894 – 901
|
[6]
|
Xie Xianquing, Zhang Di, Liu Jinshui, “Thermal expansion properties of TiC particle
reinforced ZA43 matrix composite”, Materials and Design, 2001, 22, 157 – 162
|
[7]
|
S Das, “Development of aluminum alloy composites for engineering applications”,
Trans. Indian Inst. Met, 2004, 57, 325 – 334
|
[8]
|
M T Abou El-khair, A Daoud, A Ismail, “Effect of different Al contents on the
microstructure, tensile and wear properties of Zn – based alloy”, Materials Letters,
2004, 58, 1754 – 1760
|
[9]
|
M Ramachandra, K Radhakrishna, “Sliding wear, slurry erosive, and corrosive wear
of aluminium / SiC composite”, Materials Science – Poland, 2006, 24, 333 – 349
|
[10]
|
K H W Seah, S C Sharma, P R Rao, B M Girish, “Mechanical properties of as cast
and heat treated ZA-27 / silicon carbide particulate composite”, Materials and Design,
1995, 16, 277 – 281
|
[11]
|
M Manoharan, M Gupta, “Effect of silicon carbide volume fraction on the wok
hardening behaviour of thermomechanically processed aluminium based metal matrix
composites”, Composites Part B, 30(1999), 107 – 112
|