Crack; Physical Cut; Characteristic Size - Articles

Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics (Articles)

Donglian Tan

Engineering Vol.12 No.2, February 10, 2020

DOI: 10.4236/eng.2020.122008 804 Downloads 2,387 Views Citations
Experimental Study and Numerical Simulation Using Extended Finite Element Method (XFEM) Combined with Cohesive Zone Model (CZM), of Crack Growth Induced by Non-Explosive Expansive Material on Two Neighboring Circular Holes of A Gneiss Rock (Articles)

Frank Ferry Kamgue Tiam, Raïdandi Danwe, Noël Konaï, Lucien Meva’a

Open Journal of Applied Sciences Vol.10 No.10, October 10, 2020

DOI: 10.4236/ojapps.2020.1010042 1,047 Downloads 3,330 Views Citations
System Variables Design of Safety Analysis for Fast Reactors (Articles)

Magdi Hassan Saad, Abdallah M. Ibrahim

World Journal of Nuclear Science and Technology Vol.13 No.2, April 12, 2023

DOI: 10.4236/wjnst.2023.132003 286 Downloads 1,038 Views Citations
Crack Width Comparison between ACI 318, Eurocode 2 and GB 50010 for Flexural RC Members (Articles)

Guoqiang Liu, Zhiyong Lu

Open Journal of Civil Engineering Vol.14 No.1, March 27, 2024

DOI: 10.4236/ojce.2024.141006 531 Downloads 2,594 Views Citations
Study on Acoustic Emission Characteristics of Deformation Damage Process of Zirconia Ceramics (Articles)

Qingchuan Fu, Yushu Lai

Journal of Materials Science and Chemical Engineering Vol.12 No.2, February 27, 2024

DOI: 10.4236/msce.2024.122005 231 Downloads 663 Views Citations
Research on Load Characteristic of Electrothermal Film Heating Community (Articles)

Lei Yang, Tianzong Liu, Xiaoguang Wang, Jin He, Xiaobo Song

Energy and Power Engineering Vol.9 No.4B, April 6, 2017

DOI: 10.4236/epe.2017.94B019 2,671 Downloads 3,417 Views Citations
Policy Tool Model and Its Application in the Governance of Characteristic Towns (Articles)

Dameng Luo, Yun Zhang

Open Journal of Social Sciences Vol.8 No.7, July 22, 2020

DOI: 10.4236/jss.2020.87019 800 Downloads 7,859 Views Citations
Simultaneous Multimode Oscillation of Stress-Compensated Cut Quartz Resonator with Narrow-Band Wide Variable-Range Quartz Crystal Oscillator (Articles)

Tomio Sato, Tetsuya Akitsu

Engineering Vol.6 No.13, December 26, 2014

DOI: 10.4236/eng.2014.613088 5,256 Downloads 6,559 Views Citations
Fracture Toughness Studies of Polypropylene- Clay Nanocomposites and Glass Fibre Reinfoerced Polypropylene Composites (Articles)

A. Ramsaroop, K. Kanny, T. P. Mohan

Materials Sciences and Applications Vol.1 No.5, December 1, 2010

DOI: 10.4236/msa.2010.15044 8,412 Downloads 17,122 Views Citations
Finite Element Modeling of Crack Tip Blunting for Estimation of Energy Release Rate Component of Mode I Crack near a Strength Mismatched Interface (Articles)

Sunil Bhat, Vijay G. Ukadgaonker

Applied Mathematics Vol.4 No.5A, May 21, 2013

DOI: 10.4236/am.2013.45A001 5,038 Downloads 8,116 Views Citations
This article belongs to the Special Issue on Finite Element Method
Effect Analysis of Gurson Model Parameters on Crack Extension of Pipeline (Articles)

Tieping Li, Xinlu Tian

Journal of Applied Mathematics and Physics Vol.1 No.6, December 3, 2013

DOI: 10.4236/jamp.2013.16011 3,850 Downloads 5,703 Views Citations
Numerical Simulation of the Behavior of Cracked Reinforced Concrete Members (Articles)

Pietro Croce, Paolo Formichi

Materials Sciences and Applications Vol.5 No.12, October 21, 2014

DOI: 10.4236/msa.2014.512090 5,213 Downloads 7,057 Views Citations
On the Relation of Grain Orientation and Opening Crack of an Al-Cu-Mg Sheet (Articles)

Cai Hu

Engineering Vol.9 No.5, May 31, 2017

DOI: 10.4236/eng.2017.95031 1,675 Downloads 3,306 Views Citations
Improvement of Bending Strength of Carbon Fiber/Thermoplastic Epoxy Composites
—Effects of Molecular Weight of Epoxy on Carbon Fiber/Matrix Interfacial Strength and Connection of Cracks in Matrix (Articles)

Hironori Nishida, Kazuya Okubo, Toru Fujii, Valter Carvelli

Open Journal of Composite Materials Vol.7 No.4, July 27, 2017

DOI: 10.4236/ojcm.2017.74014 1,367 Downloads 3,324 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Theoretical Analysis and Experimental Verification of Crack Initiation Characteristics of Compression-Shear Plane Crack with Hydraulic Pressure (Articles)

Yajuan Xie, Song Yu, Bangxiang Li, Ziyao Xu, Weishen Zhu

World Journal of Mechanics Vol.8 No.9, September 29, 2018

DOI: 10.4236/wjm.2018.89028 1,016 Downloads 2,225 Views Citations
Numerical Comparison Research on the Solution of Stress Intensity Factors of Multiple Crack Problems (Articles)

Guo Zhao

Advances in Pure Mathematics Vol.10 No.12, December 22, 2020

DOI: 10.4236/apm.2020.1012044 426 Downloads 1,252 Views Citations
Fatigue Crack Arrest in Mild Steel via Iron Electroplating (Articles)

Jiaming Huang, Henry Cardenas

Materials Sciences and Applications Vol.12 No.11, November 15, 2021

DOI: 10.4236/msa.2021.1211032 391 Downloads 1,905 Views Citations
Accuracy of Protein Size Estimates Based on Light Scattering Measurements (Articles)

Ken Takeuchi, Yoichi Nakatani, Osamu Hisatomi

Open Journal of Biophysics Vol.4 No.2, April 25, 2014

DOI: 10.4236/ojbiphy.2014.42009 6,436 Downloads 11,043 Views Citations
Root Growth, Nutrition and Yield of Maize with Applied Finely Limestone in Surface of Cerrado Soil (Articles)

Rafael Felippe Ratke, Hamilton Seron Pereira, João de Deus Gomes dos Santos Junior, Joaquim José Frazão, Juliano Magalhães Barbosa, Bruno de Oliveira Dias

American Journal of Plant Sciences Vol.5 No.6, March 25, 2014

DOI: 10.4236/ajps.2014.56097 4,788 Downloads 6,352 Views Citations
This article belongs to the Special Issue on Maize Research
The Analysis of Stiffness for Rubbery Metallic Material Based on Mesoscopic Features (Articles)

Hong Zuo, Hongbai Bai, Yuhong Feng

Materials Sciences and Applications Vol.2 No.6, June 24, 2011

DOI: 10.4236/msa.2011.26090 5,321 Downloads 8,418 Views Citations

First <...345 ...>Last

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies