Bounded Turning - Articles - Scientific Research Publishing

Simultaneous Optimization of Correlated Multiple Surface Quality Characteristics of Mild Steel Turned Product (Articles)

Saurav DATTA, Siba Sankar MAHAPATRA

Intelligent Information Management Vol.2 No.1, January 27, 2010

DOI: 10.4236/iim.2010.21004 6,544 Downloads 11,959 Views Citations
Machinability Study of Titanium (Grade-5) Alloy Using Design of Experiment Technique (Articles)

Kali Dass, S. R Chauhan

Engineering Vol.3 No.6, June 23, 2011

DOI: 10.4236/eng.2011.36073 6,895 Downloads 13,265 Views Citations
Modeling and Simulation of Laser Assisted Turning of Hard Steels (Articles)

Omar Abdulghani, Mohamed Sobih, Amro Youssef, Abdel-Monem El-Batahgy

Modeling and Numerical Simulation of Material Science Vol.3 No.4, October 10, 2013

DOI: 10.4236/mnsms.2013.34014 5,818 Downloads 9,616 Views Citations
Development and Testing of an Automatic Turning Movement Identification System at Signalized Intersections (Articles)

Kun Xu, Ping Yi, Chun Shao, Jialei Mao

Journal of Transportation Technologies Vol.3 No.4, October 11, 2013

DOI: 10.4236/jtts.2013.34025 3,735 Downloads 6,660 Views Citations
Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts (Articles)

Y. H. Choi, G. B. Ha, D. H. Kim, H. S. An

Journal of Power and Energy Engineering Vol.1 No.7, November 28, 2013

DOI: 10.4236/jpee.2013.17003 3,987 Downloads 6,130 Views Citations
The Effect of Tool Construction and Cutting Parameters on Surface Roughness and Vibration in Turning of AISI 1045 Steel Using Taguchi Method (Articles)

Rogov Vladimir Aleksandrovich, Ghorbani Siamak

Modern Mechanical Engineering Vol.4 No.1, February 20, 2014

DOI: 10.4236/mme.2014.41002 8,494 Downloads 13,935 Views Citations
Forest Transition and Changes in the Socio-Economic Structure of a Developed Country: A Long-Term Analysis (Articles)

Valerio Moretti, Agostino Ferrara, Andrea Colantoni, Margherita Carlucci, Luca Salvati

Modern Economy Vol.5 No.9, August 5, 2014

DOI: 10.4236/me.2014.59086 3,662 Downloads 4,926 Views Citations
Process Capability Analysis of a Centre Lathe Turning Process (Articles)

Andrew A. Erameh, Nurudeen A. Raji, Rasheed O. Durojaye, Abiodun A. Yussouff

Engineering Vol.8 No.3, March 15, 2016

DOI: 10.4236/eng.2016.83010 5,332 Downloads 10,369 Views Citations
Female Headship and Life History Research: Using Emotional Turning Points (Articles)

Joanne Cliffe

Creative Education Vol.7 No.18, December 15, 2016

DOI: 10.4236/ce.2016.718258 1,673 Downloads 3,534 Views Citations
This article belongs to the Special Issue on Emotional Intelligence Education
Artificial Neural Networks Based Integrated Predictive Modelling of Quality Characteristics in CNC Turning of Cantilever Bars (Articles)

D. M. Davakan, A. El Ouafi

World Journal of Mechanics Vol.7 No.5, May 26, 2017

DOI: 10.4236/wjm.2017.75013 1,577 Downloads 2,909 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7, July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,244 Downloads 2,537 Views Citations
Simple Singular Perturbation Problems with Turning Points (Articles)

Na Wang

Journal of Applied Mathematics and Physics Vol.7 No.12, December 9, 2019

DOI: 10.4236/jamp.2019.712208 802 Downloads 2,493 Views Citations
Influence of Machining Parameter on Tool Life While Machining Hybrid Metal Matrix Composites (Articles)

C. R. Prakash Rao, V. Ravi Kumar, D. V. Ravi Kumar, Poorna Chandra, M. Vedavyasa, M. S. Rajagopal

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.6, November 6, 2020

DOI: 10.4236/jmmce.2020.86028 798 Downloads 2,270 Views Citations
Influence of Machining Parameter on Surface Roughness and Tool Life While Machining EN24 Grade Alloy Steel (Articles)

Chand R. Prem, T. V. Sreerama Reddy

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.3, May 26, 2022

DOI: 10.4236/jmmce.2022.103019 320 Downloads 1,600 Views Citations
Development and Evaluation of Intersection-Based Turning Movement Counts Framework Using Two Channel LiDAR Sensors (Articles)

Ravi Jagirdar, Joyoung Lee, Dejan Besenski, Min-Wook Kang, Chaitanya Pathak

Journal of Transportation Technologies Vol.13 No.4, September 1, 2023

DOI: 10.4236/jtts.2023.134024 292 Downloads 1,306 Views Citations
The Realization of Lewis Turning Point Is Seen from the Labor Production Efficiency of Urban and Rural Sectors
—A Statistical Study Based on Data (Articles)

Jianfeng Jiao

Modern Economy Vol.15 No.10, October 22, 2024

DOI: 10.4236/me.2024.1510048 90 Downloads 620 Views Citations
Are Business Management Games a Suitable Tool for Analyzing the Boundedly Rational Behavior of Economic Agents? (Articles)

Oliver Musshoff, Norbert Hirschauer, Philipp Hengel

Modern Economy Vol.2 No.4, September 21, 2011

DOI: 10.4236/me.2011.24052 6,256 Downloads 10,700 Views Citations
On Bounded Second Variation (Articles)

José Giménez, Lorena López, N. Merentes, J. L. Sánchez

Advances in Pure Mathematics Vol.2 No.1, January 9, 2012

DOI: 10.4236/apm.2012.21005 4,872 Downloads 10,144 Views Citations
Exponential Dichotomy and Eberlein-Weak Almost Periodic Solutions (Articles)

Elhadi Ait Dads, Samir Fatajou, Lahcen Lhachimi

Applied Mathematics Vol.3 No.9, September 27, 2012

DOI: 10.4236/am.2012.39144 3,672 Downloads 6,493 Views Citations
A Certain Subclass of Analytic Functions with Bounded Positive Real Part (Articles)

Young Jae Sim, Oh Sang Kwon

Advances in Pure Mathematics Vol.3 No.4, July 2, 2013

DOI: 10.4236/apm.2013.34059 3,597 Downloads 6,528 Views Citations

First <...234 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies