Aluminum-Silicon Alloy; Boundary Lubrication; Casting; Surface Roughness; Adhesive Wear - Articles

Polydopamine Coating on Titanium Affects Osteoblastic Differentiation to a Greater Degree than Does Surface Roughness (Articles)

Seyed Mohsen Latifi, Ravi Shankar, Henry J. Donahue

Advances in Materials Physics and Chemistry Vol.10 No.12，December 31, 2020

DOI: 10.4236/ampc.2020.1012027 531 Downloads 1,590 Views Citations
The Profiling of International Roughness Index (IRI) Based on Lagrangian Method (Articles)

Schun T. Uechi, Hiroshi Uechi

World Journal of Engineering and Technology Vol.6 No.4，November 23, 2018

DOI: 10.4236/wjet.2018.64059 2,031 Downloads 4,586 Views Citations
Effect of Heat Treatment Processes on Microstructure and Mechanical Behavior of TC21 Titanium Alloy (Articles)

Ramadan N. Elshaer, Khaled M. Ibrahim, Azza F. Barakat, Reham R. Abbas

Open Journal of Metal Vol.7 No.3，August 31, 2017

DOI: 10.4236/ojmetal.2017.73004 1,486 Downloads 4,178 Views Citations
A Comparative Study on Microstructure and Wear Resistance of M2 Alloy Steel Cladding Layers by High-Speed Laser Cladding and Conventional Laser Cladding (Articles)

Pengfei Sun, Dengzhi Wang

Journal of Materials Science and Chemical Engineering Vol.13 No.9，September 24, 2025

DOI: 10.4236/msce.2025.139011 14 Downloads 60 Views Citations
Analysis of Molten Metal Distribution in the Mold of a Horizontal Centrifugal Casting (Articles)

Miguel A. Barron, Dulce Y. Medina, Joan Reyes

Open Journal of Applied Sciences Vol.10 No.7，July 17, 2020

DOI: 10.4236/ojapps.2020.107031 706 Downloads 2,316 Views Citations
The Simulation of Surface Charge Accumulation on PMMA with Different Surface Roughness in Vacuum (Articles)

Jiyuan Yan, Jie Ren, Qing Xie, Haofan Lin, Zhiliang Hu, Huijuan Ran, Weitao Hu, Si Li

Energy and Power Engineering Vol.9 No.4B，April 6, 2017

DOI: 10.4236/epe.2017.94B070 2,955 Downloads 4,502 Views Citations
Process-Based Friction Factor for Pipe Flow (Articles)

James M. Gregory, John A. McEnery

Open Journal of Fluid Dynamics Vol.7 No.2，June 16, 2017

DOI: 10.4236/ojfd.2017.72015 2,655 Downloads 7,442 Views Citations
Correlations of Materials Surface Properties with Biological Responses (Articles)

Robert E. Baier

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.1，January 7, 2015

DOI: 10.4236/jsemat.2015.51005 4,774 Downloads 6,380 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Appraisal of Surface Modified AISI 316 L Stainless Steels by Plasma and Solid Nitriding Techniques (Articles)

R. Guardian, I. Rosales-Cadena, J. L. Valle-Mata, J. Pereyra-Hernández, O. Ocampo

Materials Sciences and Applications Vol.11 No.7，July 17, 2020

DOI: 10.4236/msa.2020.117032 654 Downloads 1,789 Views Citations
Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions (Articles)

Ahmad T. Mayyas, Mohammad M. Hamasha, Abdalla Alrashdan, Adel M. Hassan, Mohammed T. Hayajneh

J. of Minerals and Materials Characterization and Eng. Vol.11 No.4，April 20, 2012

DOI: 10.4236/jmmce.2012.114025 5,795 Downloads 7,933 Views Citations
Mold Thermo-Mechanical Rigidity Criterion for Surface Quality of Continuous Casting of Steel (Articles)

Mostafa Omar El-Bealy

Materials Sciences and Applications Vol.4 No.1，January 24, 2013

DOI: 10.4236/msa.2013.41006 7,503 Downloads 10,326 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,580 Downloads 19,450 Views Citations
Numerical Optimization of Sand Casting Parameters Using the Dantzig’s Simplex Method (Articles)

John Ogheneortega Oji, Simon Godenaan Datau, Kunle Joseph Akinluwade, Adeyinka Taofeek Taiwo, Dayo Adeyemi Isadare, Sunday Hendrix Pamtoks, Adelana Rasaki Adetunji

J. of Minerals and Materials Characterization and Eng. Vol.1 No.5，September 13, 2013

DOI: 10.4236/jmmce.2013.15039 4,335 Downloads 6,262 Views Citations
Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC_P Metal Matrix Composite (Articles)

Serajul Haque, Prem Kumar Bharti, Akhtar Hussain Ansari

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，January 17, 2014

DOI: 10.4236/jmmce.2014.21009 6,536 Downloads 9,006 Views Citations
Suitability of Suluu-Terek Basalt Deposits for Stone Casting (Articles)

Zhanbolot Aidaraliev, Imiyla Rysbaeva, Rakhat Atyrova, Akimbek Abdykalykov, Baktygul Bekbolot Kyzy, Chynara Zholdoshova, Nematilla Sopubekov, Altynbek Kuduev, Iurii Dubinin, Zhypargul Abdullaeva

J. of Minerals and Materials Characterization and Eng. Vol.10 No.1，December 13, 2021

DOI: 10.4236/jmmce.2022.101001 235 Downloads 1,053 Views Citations
Study on Key Joining Technology and Test Method of Steel/Al Hybrid Structure Body-in-White (Articles)

Lijun Han, Fuyang Liu, Changhua Liu

Journal of Materials Science and Chemical Engineering Vol.12 No.4，April 30, 2024

DOI: 10.4236/msce.2024.124009 126 Downloads 464 Views Citations
Interaction of Atoms with Grain Surfaces in Steel: Periodic Dependence of Binding Energy on Atomic Number and Influence on Wear Resistance (Articles)

Yuri F. Migal, Vladimir I. Kolesnikov, Vladimir N. Doronkin, Evgeni S. Novikov

Advances in Materials Physics and Chemistry Vol.2 No.4，December 28, 2012

DOI: 10.4236/ampc.2012.24030 5,930 Downloads 8,424 Views Citations
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6，July 1, 2010

DOI: 10.4236/eng.2010.26059 9,084 Downloads 16,096 Views Citations
Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant (Articles)

Jeong-Du Kim, Keon-Beom Lee

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210101 6,293 Downloads 10,791 Views Citations
Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool (Articles)

Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi

Modern Mechanical Engineering Vol.4 No.1，December 30, 2013

DOI: 10.4236/mme.2014.41001 7,540 Downloads 15,363 Views Citations

<...234 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies