Cutting - Articles - Scientific Research Publishing

HALF-CUTTING METHOD during Hysterectomy for Large Uterine Cervical Myoma (Articles)

Yosuke Fukui, Yuki Yamada, Seiji Mabuchi

Open Journal of Obstetrics and Gynecology Vol.11 No.9，September 17, 2021

DOI: 10.4236/ojog.2021.119113 241 Downloads 1,602 Views Citations
Rooting of Stem Cuttings of Jatropha platyphylla (Euphorbiaceae) in the Obtaining of Axillary Buds for Grafting (Articles)

Edith Salazar-Villa, Miguel Angel Angulo-Escalante, Jesús Diego Castro-Valenzuela, Karla Marina Báez-Parra, Lluvia de Abril Alexandra Soriano-Melgar, Federico Soto-Landeros

American Journal of Plant Sciences Vol.12 No.12，December 28, 2021

DOI: 10.4236/ajps.2021.1212130 294 Downloads 3,017 Views Citations
Fabrication, Characterization and Machining of Al6061 Reinforced with Red Mud Composite (Articles)

Poorna Chandra, V. Ravi Kumar, R. Kiran, D. V. Ravi Kumar, C. R. Prakash Rao, R. Suresh

J. of Minerals and Materials Characterization and Eng. Vol.10 No.1，January 24, 2022

DOI: 10.4236/jmmce.2022.101003 332 Downloads 1,298 Views Citations
Impact of Timber Logging on Neighbouring Stands in a Forest of the South Western Cameroon (Articles)

Kato Samuel Namuene, Andrew Enow Egbe

Open Journal of Forestry Vol.12 No.2，April 29, 2022

DOI: 10.4236/ojf.2022.122014 231 Downloads 1,149 Views Citations
Prospects of Robot Laser Cutting in the Era of Industry 4.0 (Articles)

Emmanuel Afrane Gyasi, Arttu Antila, Prince Owusu-Ansah, Paul Kah, Antti Salminen

World Journal of Engineering and Technology Vol.10 No.3，August 24, 2022

DOI: 10.4236/wjet.2022.103042 419 Downloads 2,028 Views Citations
Comprehensive Review of Studies on Metamorphic Rocks (Articles)

Hakan Citak, Mustafa Coramik, Huseyin Gunes, Sabri Bicakci, Yavuz Ege

International Journal of Geosciences Vol.14 No.10，October 31, 2023

DOI: 10.4236/ijg.2023.1410052 198 Downloads 1,000 Views Citations
Environmental Management Systems and Financial Performance: The Case of Listed Companies in Mauritius (Articles)

Pariag-Maraye Neeveditah, Ansaram Karishma, Ramkalawon Nitoosheeka Devi

Theoretical Economics Letters Vol.7 No.7，December 7, 2017

DOI: 10.4236/tel.2017.77139 1,326 Downloads 4,254 Views Citations
Verification of Hazard Analysis and Critical Control Point in Hotels and Catering Units: Evaluation of the Cleaning and Disinfection Procedures and Microbiological Monitoring of Hot and Cold Meals (Articles)

Constantina Nasopoulou, Panagiotis Poulios, Mania Magli, Nikolaos Gdontelis, Constantinos Papanotas, Ioannis Zabetakis

Food and Nutrition Sciences Vol.3 No.5，May 16, 2012

DOI: 10.4236/fns.2012.35083 4,593 Downloads 8,513 Views Citations
Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al₂O₃) (Articles)

T. Sasimurugan, K. Palanikumar

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013094 6,786 Downloads 10,190 Views Citations
Constraint Optimal Selection Techniques (COSTs) for Linear Programming (Articles)

Goh Saito, H. W. Corley, Jay M. Rosenberger

American Journal of Operations Research Vol.3 No.1，January 30, 2013

DOI: 10.4236/ajor.2013.31004 4,424 Downloads 7,805 Views Citations
Frequently cutting restriction enzymes: Clearing the fog to see the ends (Articles)

María I. Vaquero-Sedas, Miguel A. Vega-Palas

American Journal of Molecular Biology Vol.3 No.1，January 31, 2013

DOI: 10.4236/ajmb.2013.31007 4,258 Downloads 7,121 Views Citations
A Particle Swarm Optimization Algorithm for a 2-D Irregular Strip Packing Problem (Articles)

Mohamed A. Shalaby, Mohamed Kashkoush

American Journal of Operations Research Vol.3 No.2，March 28, 2013

DOI: 10.4236/ajor.2013.32024 10,059 Downloads 14,950 Views Citations
Patient-specific instruments as a standard procedure in total knee arthroplasty: Logistics and postoperative radiological results in 70 patients (Articles)

Dominik Drnek, Nicolas Haffner, Armin Sadjed, Peter Ritschl

Case Reports in Clinical Medicine Vol.3 No.1，January 21, 2014

DOI: 10.4236/crcm.2014.31014 4,242 Downloads 6,672 Views Citations
The Effect of Tool Construction and Cutting Parameters on Surface Roughness and Vibration in Turning of AISI 1045 Steel Using Taguchi Method (Articles)

Rogov Vladimir Aleksandrovich, Ghorbani Siamak

Modern Mechanical Engineering Vol.4 No.1，February 20, 2014

DOI: 10.4236/mme.2014.41002 8,289 Downloads 13,371 Views Citations
Application of FVM Analysis for Elastic Characteristics on Cutting Process of a Composited Coating Iron (Articles)

Jaegwi Go, Je-Hyun Lee

Applied Mathematics Vol.5 No.18，October 30, 2014

DOI: 10.4236/am.2014.518274 2,284 Downloads 3,157 Views Citations
This article belongs to the Special Issue on Mathematical Modeling and Experiment
Rooting Abilities in Vitis vinifera L.: Total Lipid and Fatty Acids Evolution in Perle Noir Cutting (Articles)

Henda Cheikhrouhou, Manel Zrida, Bechir Ezzili

Agricultural Sciences Vol.6 No.5，May 27, 2015

DOI: 10.4236/as.2015.65049 2,840 Downloads 3,690 Views Citations
The Accuracy of Initial Bone Cutting in Total Knee Arthroplasty (Articles)

Takaaki Ohmori, Toru Maeda, Tamon Kabata, Yoshitomo Kajino, Shintaro Iwai, Hiroyuki Tsuchiya

Open Journal of Orthopedics Vol.5 No.10，September 30, 2015

DOI: 10.4236/ojo.2015.510040 3,979 Downloads 5,340 Views Citations
On Merging Cover Inequalities for Multiple Knapsack Problems (Articles)

Randal Hickman, Todd Easton

Open Journal of Optimization Vol.4 No.4，December 25, 2015

DOI: 10.4236/ojop.2015.44014 3,835 Downloads 5,255 Views Citations
Comprehensive Study on Machinability of Titanium Composite (Articles)

Basim A. Khidhir

Journal of Materials Science and Chemical Engineering Vol.4 No.2，February 1, 2016

DOI: 10.4236/msce.2016.42001 3,843 Downloads 5,070 Views Citations
Influence of Soil Types on Establishment and Early Growth of Populus trichocarpa (Articles)

Henrik Böhlenius, Rolf Övergaard, Sandra Jämtgård

Open Journal of Forestry Vol.6 No.5，September 5, 2016

DOI: 10.4236/ojf.2016.65029 1,715 Downloads 3,438 Views Citations

<...234 >

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies