Surface Hardness - Articles - Scientific Research Publishing

Development of an In-Situ Composite Doped Coating for Corrosion Protection and Mechanical Properties Enhancements in Process Engineering (Articles)

Oluwasegun T. Joshua, Ojo S. I. Fayomi, Enejoh T. Omeje

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.4, July 22, 2019

DOI: 10.4236/jmmce.2019.74013 665 Downloads 1,800 Views Citations
Microstructure, Mechanical Properties (Strength and Hardness) and Wear Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites (Articles)

Joel Hemanth, K. Arasukumar

Journal of Materials Science and Chemical Engineering Vol.7 No.7, July 23, 2019

DOI: 10.4236/msce.2019.77007 764 Downloads 2,468 Views Citations
On the Pre-Forging Heating Methods for AA2014 Alloy (Articles)

Richard Turner, William Turner, Hao Wu

World Journal of Engineering and Technology Vol.11 No.4, November 27, 2023

DOI: 10.4236/wjet.2023.114059 193 Downloads 771 Views Citations
An Investigation into the Adhesion Strength of Diamond Like Carbon Multilayer Coating (DLC/TiN/Ti/Cu/Ni) (Articles)

B. RAMAMOORTHY, BINU C. YELDOSE

Intelligent Information Management Vol.1 No.3, December 29, 2009

DOI: 10.4236/iim.2009.13027 10,034 Downloads 18,276 Views Citations
The Quantized Characterization of Cooked Rice Hardness and Research on the Automatic Measurement Technology (Articles)

N. Jiang, Y. Gao, J.P. Zhou, L.Q. Gao, J.H. Zhou, Q.G. Dai

Engineering Vol.2 No.2, March 15, 2010

DOI: 10.4236/eng.2010.22013 5,016 Downloads 9,356 Views Citations
Melting and Corrosion Behavior of Al-9Zn Based Alloys with Cu and Mg Additions (Articles)

El Said Gouda, Emad Ahmed, Nabih Tawfik

Materials Sciences and Applications Vol.2 No.5, May 23, 2011

DOI: 10.4236/msa.2011.25063 5,864 Downloads 9,445 Views Citations
The role of hardness and roughness on the wear of different CoCrMo counterfaces on UHMWPE for artificial joints (Articles)

Victor A. González-Mora, Michael Hoffmann, Rien Stroosnijder, F. Javier Gil

Journal of Biomedical Science and Engineering Vol.4 No.10, October 17, 2011

DOI: 10.4236/jbise.2011.410081 5,182 Downloads 10,313 Views Citations
The Electronegativity and the Global Hardness Are Periodic Properties of Atoms (Articles)

Nazmul Islam, Dulal C. Ghosh

Journal of Quantum Information Science Vol.1 No.3, December 9, 2011

DOI: 10.4236/jqis.2011.13019 7,904 Downloads 16,059 Views Citations
Nanoindentation Study on Tourmaline (Articles)

M.O. Adeoye, O.O. Adewoye

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.1, June 12, 2006

DOI: 10.4236/jmmce.2006.51004 5,897 Downloads 7,691 Views Citations
Annealing Heat Treatment Effects on Steel Welds (Articles)

A.V. Adedayo, S.A. Ibitoye, O.A. Oyetoyan

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.6, June 20, 2010

DOI: 10.4236/jmmce.2010.96039 11,299 Downloads 17,332 Views Citations
Tempering Heat Treatment Effects on Steel Welds (Articles)

A.V. Adedayo, S.A. Ibitoye, O.O. Oluwole

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.8, June 27, 2011

DOI: 10.4236/jmmce.2011.108059 7,550 Downloads 10,069 Views Citations
Role of Heat Treatment on Al6061- Frit Particulate Composites (Articles)

D. Ramesh, R.P. Swamy, T.K. Chandrashekar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.4, April 20, 2012

DOI: 10.4236/jmmce.2012.114026 6,796 Downloads 9,182 Views Citations
Studies on Mechanical and Wear Properties of Al6061/Beryl Composites (Articles)

Reddappa Hosur Reddappa, Kitakanur Ramareddy Suresh, Hollakere Basavaraj Niranjan, Kestur Gundappa Satyanarayana

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117056 6,746 Downloads 9,837 Views Citations
Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds (Articles)

J. O. Olawale, S. A. Ibitoye, K.M. Oluwasegun, M. D. Shittu, R. C. Ofoezie

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.9, September 25, 2012

DOI: 10.4236/jmmce.2012.119084 8,898 Downloads 13,092 Views Citations
Correlation between Hardness, Structure and Electrochemical Performance of an AlZnMnMg Alloy (Articles)

S. Valdez, B. Campillo, J. J. Islas

Engineering Vol.4 No.9, September 28, 2012

DOI: 10.4236/eng.2012.49075 9,603 Downloads 12,636 Views Citations
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites (Articles)

Hillol Joardar, Goutam Sutradhar, Nitai Sundar Das

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.10, October 31, 2012

DOI: 10.4236/jmmce.2012.1110100 6,150 Downloads 8,206 Views Citations
Effect of Soaking Temperature on Physical and Functional Properties of Parboiled Rice Cultivars Grown in Temperate Region of India (Articles)

Shabir Ahmad Mir, Sowriappan John Don Bosco

Food and Nutrition Sciences Vol.4 No.3, March 19, 2013

DOI: 10.4236/fns.2013.43038 7,665 Downloads 12,823 Views Citations
Effect of Silicon Additions on the Wear Properties of Grey Cast Iron (Articles)

Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.2, March 29, 2013

DOI: 10.4236/jmmce.2013.12012 9,190 Downloads 14,106 Views Citations
Optimizing the Properties of Polyether Based Polyurethane Foam (Articles)

F. O. Aramide, P. O. Atanda, E. O. Olorunniwo

Open Journal of Polymer Chemistry Vol.3 No.4, September 17, 2013

DOI: 10.4236/ojpchem.2013.34015 8,561 Downloads 13,407 Views Citations
Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress (Articles)

Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama

Journal of Surface Engineered Materials and Advanced Technology Vol.3 No.4, October 8, 2013

DOI: 10.4236/jsemat.2013.34035 10,848 Downloads 16,364 Views Citations

First <123 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies