Tool Steel - Articles - Scientific Research Publishing

Wootz: Cast Iron or Steel? (Articles)

D. A. Sukhanov, N. V. Plotnikova

Materials Sciences and Applications Vol.7 No.11，November 29, 2016

DOI: 10.4236/msa.2016.711061 1,976 Downloads 4,750 Views Citations
Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel (Articles)

Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1，January 16, 2017

DOI: 10.4236/msce.2017.51013 4,046 Downloads 5,950 Views Citations
Study of Electroslag Remelted and Nitrogen Containing High Speed Tool Steel M41 (Articles)

S. A. El Badry, Hossam Halfa, A. Ahmed, A. G. Moustafa

J. of Minerals and Materials Characterization and Eng. Vol.9 No.1，January 20, 2010

DOI: 10.4236/jmmce.2010.91001 5,250 Downloads 6,697 Views Citations
Ion and Gas Nitriding Applied to Steel Tool for Hot Work X38CrMoV5 Nitriding Type: Impact on the Wear Resistance (Articles)

S. Ben Slima

Materials Sciences and Applications Vol.3 No.9，September 27, 2012

DOI: 10.4236/msa.2012.39093 5,833 Downloads 8,377 Views Citations
Influence of Shot Peening on DIN 1.2714 Hot Work Tool Steel (Articles)

Valmik Bhavar, Sachin V. Patil, Prakash Kattire, P. P. Date, R. K. P. Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1，January 16, 2017

DOI: 10.4236/msce.2017.51012 3,473 Downloads 5,389 Views Citations
Influence of the Distribution of Excess Carbide on the Properties of Genuine Damascus Steel (Articles)

Dmitry Sukhanov, Nataliya Plotnikova

Materials Sciences and Applications Vol.10 No.2，January 30, 2019

DOI: 10.4236/msa.2019.102010 1,535 Downloads 3,664 Views Citations
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6，July 1, 2010

DOI: 10.4236/eng.2010.26059 9,014 Downloads 15,941 Views Citations
The Effect of Heat Treatment Atmosphere on Hardening of Surface Region of H13 Tool Steel (Articles)

Timotius Pasang, Zhan Chen, Maziar Ramezani, Thomas Neitzert, Dominique Au

Journal of Materials Science and Chemical Engineering Vol.1 No.6，November 13, 2013

DOI: 10.4236/msce.2013.16004 6,557 Downloads 10,982 Views Citations
Electroslag Remelting of High Technological Steels (Articles)

Hossam Halfa, A. M. Reda

J. of Minerals and Materials Characterization and Eng. Vol.3 No.6，November 9, 2015

DOI: 10.4236/jmmce.2015.36047 5,437 Downloads 6,797 Views Citations
Some Features of the Influence of Titanium and Nitrogen Addition to NiCrMoV Steel (Articles)

Saeed Ghali, Mamdouh Eissa, Michael Mishreky

J. of Minerals and Materials Characterization and Eng. Vol.6 No.2，March 20, 2018

DOI: 10.4236/jmmce.2018.62015 965 Downloads 2,120 Views Citations
Determination of the Friction Coefficient in the Flat Strip Drawing Test (Articles)

Anvar Makhkamov

Engineering Vol.13 No.11，November 29, 2021

DOI: 10.4236/eng.2021.1311043 253 Downloads 1,457 Views Citations
Intelligent Tool Management Strategies for Automated Manufacturing Systems (Articles)

D. Ganeshwar Rao, C. Patvardhan, Ranjit Singh

Intelligent Control and Automation Vol.2 No.4，November 3, 2011

DOI: 10.4236/ica.2011.24046 6,391 Downloads 10,143 Views Citations
Design of Bibliographic Data Management Tool for Small Book Corners (Articles)

Yuhan Cai

Open Access Library Journal Vol.10 No.12，December 29, 2023

DOI: 10.4236/oalib.1110989 43 Downloads 253 Views Citations
Influence of Morphology Pattern of Genuine Damascus Steel on the Nature of Relief of Fracture Surfaces (Articles)

Dmitry A. Sukhanov

Materials Sciences and Applications Vol.13 No.7，July 6, 2022

DOI: 10.4236/msa.2022.137027 213 Downloads 1,394 Views Citations
New Ways to Address Competition Challenges in Digital Markets: Reflections and Enlightenment of the EU’s Proposal for a New Competition Tool (Articles)

Qichao Dong

Beijing Law Review Vol.14 No.3，September 21, 2023

DOI: 10.4236/blr.2023.143075 164 Downloads 681 Views Citations
Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel (Articles)

Petra Kersting, Dirk Biermann, Eugen Krebs

Engineering Vol.4 No.9，September 28, 2012

DOI: 10.4236/eng.2012.49068 5,110 Downloads 7,399 Views Citations
An Automatic Cross-System File Generation System for Biological Network Visualization Tools (Articles)

Tianhan Zhang, Xun Lu

Applied Mathematics Vol.5 No.19，November 12, 2014

DOI: 10.4236/am.2014.519296 3,614 Downloads 4,384 Views Citations
This article belongs to the Special Issue on Mathematical Biology
Development and Validation Analysis of Redeemer’s University Alexithymia Scale (RUNAS) (Articles)

Ibukunoluwa Busayo Bello, Ebenezer Olutope Akinnawo, Bede Chinonye Akpunne, Abayomi Olubanjo Olusa

Psychology Vol.13 No.3，March 31, 2022

DOI: 10.4236/psych.2022.133031 255 Downloads 993 Views Citations
EVA as Superior Performance Measurement Tool (Articles)

Abdullah Al Mamun, Harry Entebang, Shazali Abu Mansor

Modern Economy Vol.3 No.3，May 22, 2012

DOI: 10.4236/me.2012.33041 16,463 Downloads 26,487 Views Citations
Effect of Welding on Microstructure and Mechanical Properties of an Industrial Low Carbon Steel (Articles)

Zakaria Boumerzoug, Chemseddine Derfouf, Thierry Baudin

Engineering Vol.2 No.7，July 23, 2010

DOI: 10.4236/eng.2010.27066 31,794 Downloads 61,328 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies