Insert-Injection Molding - Articles - Scientific Research Publishing

Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4，July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,289 Downloads 2,732 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming (Articles)

Mutsumi Takahashi, Masatoshi Takeuchi

Materials Sciences and Applications Vol.15 No.9，September 18, 2024

DOI: 10.4236/msa.2024.159024 35 Downloads 166 Views Citations
Processed Low NO_x Fly Ash as a Filler in Plastics (Articles)

X. Huang, J.Y. Hwang, J.M. Gillis

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，June 12, 2003

DOI: 10.4236/jmmce.2003.21002 7,451 Downloads 9,995 Views Citations
Research Progress of the Modification in Sulfur Concrete (Articles)

Xuemin You

Materials Sciences and Applications Vol.12 No.7，July 16, 2021

DOI: 10.4236/msa.2021.127024 620 Downloads 2,409 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1，January 29, 2022

DOI: 10.4236/msa.2022.131004 197 Downloads 795 Views Citations
Effect of Molding Technique That Move Model Position Just before Formation in Production of Laminated Mouthguard (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.14 No.6，June 15, 2023

DOI: 10.4236/msa.2023.146020 163 Downloads 585 Views Citations
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5，May 24, 2023

DOI: 10.4236/oalib.1110097 337 Downloads 5,462 Views Citations
Mg/Al complex oxides-A new type of solid basic catalyst for epoxidation (Articles)

Heng Miao, Shi-Chao Xu, Hai-Nan Wang, Wen-Xia Qin, Lin Lin Zhang, Ji-Mei Zhang, Juan Yang, Zhao Dai, Guo Zheng, En-Qi Tang

Journal of Biomedical Science and Engineering Vol.3 No.2，March 1, 2010

DOI: 10.4236/jbise.2010.32028 4,967 Downloads 9,537 Views Citations
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2，April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,280 Downloads 19,614 Views Citations
Modification and Development of a Blow Molding Machine (Articles)

Bassam A. Al-Helou

Engineering Vol.4 No.4，April 26, 2012

DOI: 10.4236/eng.2012.44025 7,589 Downloads 11,371 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2，April 15, 2013

DOI: 10.4236/ojcm.2013.32004 5,784 Downloads 9,463 Views Citations
Reducing Refractive Index Variations in Compression Molded Lenses by Annealing (Articles)

Bo Tao, Lianguan Shen, Allen Yi, Mujun Li, Jian Zhou

Optics and Photonics Journal Vol.3 No.2B，July 18, 2013

DOI: 10.4236/opj.2013.32B029 4,973 Downloads 6,985 Views Citations
Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites (Articles)

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Open Journal of Composite Materials Vol.11 No.4，September 1, 2021

DOI: 10.4236/ojcm.2021.114006 359 Downloads 1,785 Views Citations
Experimental Characterization by Fluorescence of Capillary Flows in the Fiber Tows of Engineering Fabrics (Articles)

François LeBel, Amir Ershad Fanaei, Édu Ruiz, François Trochu

Open Journal of Inorganic Non-metallic Materials Vol.2 No.3，July 19, 2012

DOI: 10.4236/ojinm.2012.23004 6,750 Downloads 14,082 Views Citations
Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Open Journal of Organic Polymer Materials Vol.6 No.1，January 7, 2016

DOI: 10.4236/ojopm.2016.61001 4,291 Downloads 5,606 Views Citations
The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Advances in Materials Physics and Chemistry Vol.6 No.1，January 19, 2016

DOI: 10.4236/ampc.2016.61001 4,458 Downloads 5,508 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1，January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,530 Downloads 6,124 Views Citations
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM (Articles)

Jens Schuster, Martin Schütz, Johannes Lutz, Laura Lempert

Open Journal of Composite Materials Vol.6 No.4，September 19, 2016

DOI: 10.4236/ojcm.2016.64010 1,879 Downloads 3,140 Views Citations
The Influence of Molding Density of TiO₂ Varistor-Ceramic on Densification of Ceramic Body and Grain Growth (Articles)

Yu Wang, Kemin Zhang, Wenge Li, Weihua Yao, Jinxin Ma, Xiaolin Zhang

J. of Minerals and Materials Characterization and Eng. Vol.4 No.6，November 29, 2016

DOI: 10.4236/jmmce.2016.46031 1,242 Downloads 2,012 Views Citations
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4，July 27, 2017

DOI: 10.4236/ojcm.2017.74015 2,286 Downloads 4,271 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages

<12 >

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies