[1]
|
Comparative thermal analysis of coal fuels, biomass, fly ash and polyamide
|
|
Kleczkowska, M Szumera, A Gnatowski… - Energy,
2022 |
|
|
[2]
|
Preparation of Oil Shale Ash Filled High Density Polyethylene Composite Materials and their Characterization.
|
|
RAWASHDEH… - Journal of Polymer …,
2021 |
|
|
[3]
|
AJ Csian OURNALOF HEMISTRY AJ Csian OURNALOF HEMISTRY
|
|
SHURAFAT, R BANAT - Asian Journal of Chemistry,
2021 |
|
|
[4]
|
Preparation of Oil Shale Ash Filled High Density Polyethylene Composite Materials and their Characterization
|
|
Rawashdeh… - Journal of Polymer …,
2021 |
|
|
[5]
|
The study of fly ash filler behaviour in the polymer matrix of polyethyleneterephthalate
|
|
2019 |
|
|
[6]
|
Pulp and Paper Mill Fly Ash: A Review
|
|
2019 |
|
|
[7]
|
Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification
|
|
2019 |
|
|
[8]
|
Experimental Investigation of Mechanical Properties of Impact Modified Polyvinyl Chloride-Fly Ash Composites
|
|
2018 |
|
|
[9]
|
Gypsum: Use of Electric Power Generation By-Products in Wallboard, Cement and Plastics
|
|
2018 |
|
|
[10]
|
Υβριδικά συστήματα πολυμερικής μήτρας με μικρο-και νανο-πληρωτές άνθρακα
|
|
2018 |
|
|
[11]
|
Paradigm for natural frequency of an un-cracked simply supported beam and its application to single-edged and multi-edged cracked beam
|
|
Vibrations in Physical Systems,
2018 |
|
|
[12]
|
The Influence of Blast Furnace Slag as a Functional Filler on Polypropylene Compounds
|
|
2017 |
|
|
[13]
|
Development of Fe2O3–PANI nanocomposite thin film based sensor for NO2 detection
|
|
Journal of the Taiwan Institute of Chemical Engineers,
2017 |
|
|
[14]
|
General model for comparative tensile mechanical properties of composites fabricated from fly ash and virgin/recycled high‐density polyethylene
|
|
Polymer Engineering & Science,
2016 |
|
|
[15]
|
Property evaluation of nanostructured fly ash-reinforced acrylonitrile butadiene styrene nanocomposites
|
|
Journal of Thermoplastic Composite Materials,
2016 |
|
|
[16]
|
Development of a lightweight BMC material using fly ash
|
|
Advanced Composite Materials,
2016 |
|
|
[17]
|
Concentration and Recovery of Positively Buoyant Cenospheres using an Inverted REFLUX Classifier
|
|
2016 |
|
|
[18]
|
NGHIêN C?U ?NG D?NG TRO BAY LàM CH?T ??N GIA C??NG CHO V?T LI?U CAO SU Và CAO SU BLEND
|
|
Thesis,
2015 |
|
|
[19]
|
Upgrading of Cenospheres in Fly ash using a Series of Inverted Reflux Classifiers
|
|
2015 |
|
|
[20]
|
Multistage Concentration of Cenospheres in Fly Ash Using the Inverted Reflux Classifier
|
|
2015 |
|
|
[21]
|
Evaluation of properties of industrial waste filled polymer composites for automobile applications
|
|
Materials Science and Technology,
2015 |
|
|
[22]
|
Effect of particle size of fly ash cenospheres on the properties of acrylonitrile butadiene styrene-filled composites
|
|
Journal of Thermoplastic Composite Materials,
2014 |
|
|
[23]
|
Management of coal combustion wastes
|
|
2014 |
|
|
[24]
|
Surface characterization of modified fly ash for polymer filler applications: A case study with polypropylene
|
|
Materials Express,
2014 |
|
|
[25]
|
Studies on the effect of maleic anhydride–grafted polypropylene with different MFI on mechanical, thermal and morphological properties of fly ash-filled PP composites
|
|
Journal of Thermoplastic …,
2014 |
|
|
[26]
|
UJI KARAKTERISASI TARIK DAN TERMAL PLASTIK HDPE DENGAN FILLER ABU LAYANG DAN SILANE
|
|
2013 |
|
|
[27]
|
Clean coal technology combustion products: properties, agricultural and environmental applications, and risk management
|
|
Advances in Agronomy,
2013 |
|
|
[28]
|
Compounding of Polyethylene using stone cutting waste (limestone powder)
|
|
2013 |
|
|
[29]
|
Upgrading of positively buoyant particles using an inverted reflux classifier
|
|
NULL
2013 |
|
|
[30]
|
USE OF VOLCANIC ASH AS AN ALTERNATIVE FILLER MATERIAL IN PPS COMPOSITES FOR THERMAL AND VISCOELASTIC PROPERTIES
|
|
?oban, Onur, Mustafa ?zgür Bora, Egemen Avcu, Sinan Fidan, Tamer S?nmaz?elik, and Orkun Ersoy ,
2012 |
|
|
[31]
|
Preparation and Characterization of CaSiO3/Natural Rubber Composite
|
|
Advanced Materials Research,
2012 |
|
|
[32]
|
Relative melt viscosity, mechanical and electrical properties of polymer composites of HDPE/fly ash.
|
|
2012 |
|
|
[33]
|
Use of Electric Power Generation By-Products in Wallboard, Cement and Plastics
|
|
Plantz, Philip E,
2012 |
|
|
[34]
|
Preparation and Characterization of CaSiO3 /Natural Rubber Composite
|
|
Advanced Materials Research,
2012 |
|
|
[35]
|
Research of Preparation and Characterization of PP/EPDM/CaS Composites
|
|
Applied Mechanics and Materials,
2011 |
|
|
[36]
|
Effects of mica and fly ash concentration on the properties of polyester thermoplastic elastomer composites
|
|
Journal of Thermoplastic Composite Materials,
2011 |
|
|
[37]
|
Effective thermal conductivity and coefficient of linear thermal expansion of high-density polyethylene—fly ash composites
|
|
Indian Journal of Physics,
2011 |
|
|
[38]
|
Novel observations on kinetics of nonisothermal crystallization in fly ash filled isotactic‐polypropylene composites
|
|
Journal of applied polymer science,
2010 |
|
|
[39]
|
Characterization of highly filled wood flour–polyvinyl chloride composites: Dynamic mechanical and dielectric analysis
|
|
Polymer Engineering & Science,
2010 |
|
|
[40]
|
Nghiên cứu khả năng chảy nhớt, tính chất cơ lý và tính chất điện của vật liệu compozit HDPE/tro bay
|
|
2010 |
|
|
[41]
|
Study on use of non-magnetic fraction of pulverized coal fly-ash as filler in specialty paper manufacturing
|
|
magnesium,
2010 |
|
|
[42]
|
Isothermal crystallization kinetics of fly ash filled iso- polypropylene composite- and a new physical approach
|
|
Journal of thermal …,
2010 |
|
|
[43]
|
Synthesis and Characterization of Hdpe Plastic Film for Herbicide Container Using Fly Ash Class F As Filler
|
|
2010 |
|
|
[44]
|
Study on use of non-magnetic fraction of pulverized coal fly ash as filler in specialty paper manufacturing
|
|
2010 |
|
|
[45]
|
Structure–property interface correlation of fly ash–isotactic polypropylene composites
|
|
Journal of materials science,
2009 |
|
|
[46]
|
Characterization of highly filled wood flour–PVC composites: Morphological and thermal studies
|
|
Journal of applied polymer science,
2009 |
|
|
[47]
|
Effect of particle size and concentration of flyash on properties of polyester thermoplastic elastomer composites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2009 |
|
|
[48]
|
Isothermal crystallization kinetics of fly ash filled iso-polypropylene composite-and a new physical approach
|
|
Journal of thermal analysis and calorimetry,
2009 |
|
|
[49]
|
Photoluminescence of solution processed poly n-vinyl carbazole films
|
|
Journal of Applied Polymer Science,
2009 |
|
|
[50]
|
Thermal and rheological behavior of ultrafine fly ash filled LDPE composites
|
|
Journal of applied polymer science,
2008 |
|
|
[51]
|
Limitations of Combustion Ashes:'From Threat to Profit'
|
|
NULL
2008 |
|
|
[52]
|
Effects of pulverized coal fly-ash addition as a wet-end filler in papermaking
|
|
2008 |
|
|
[53]
|
PEER-REVIEWED PULPING
|
|
Tappi Journal,
2008 |
|
|
[54]
|
Influence of reactivity of fly ash on geopolymerisation
|
|
Advances in applied ceramics,
2007 |
|
|
[55]
|
Novel geopolymeric building materials through synergistic utilisation of industrial waste
|
|
NULL
2007 |
|
|
[56]
|
Coal fly ash: from waste to industrial product
|
|
Particle & Particle Systems Characterization,
2007 |
|
|
[57]
|
Towards sustainable solutions for fly ash through mechanical activation
|
|
Resources, Conservation and Recycling,
2007 |
|
|
[58]
|
Mechanical and morphological properties of recycled high‐density polyethylene, filled with calcium carbonate and fly ash
|
|
Journal of applied polymer science,
2006 |
|
|
[59]
|
LUẬN ÁN TIẾN SĨ HÓA HỌC
|
|
|
|
|
[60]
|
Photoluminescence of solution processed poly n-vinyl carbazole films (p 1-9) PS Chung, PH Holloway Published Online: May 27 2009 12: 55PM. DOI …
|
|
E Otsuka, A Suzuki, MMM Elnashar, MA Yassin
|
|
|