Compression Molding - Articles - Scientific Research Publishing

The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5，May 24, 2023

DOI: 10.4236/oalib.1110097 333 Downloads 5,389 Views Citations
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2，April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,279 Downloads 19,605 Views Citations
Reducing Refractive Index Variations in Compression Molded Lenses by Annealing (Articles)

Bo Tao, Lianguan Shen, Allen Yi, Mujun Li, Jian Zhou

Optics and Photonics Journal Vol.3 No.2B，July 18, 2013

DOI: 10.4236/opj.2013.32B029 4,972 Downloads 6,984 Views Citations
Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites (Articles)

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Open Journal of Composite Materials Vol.11 No.4，September 1, 2021

DOI: 10.4236/ojcm.2021.114006 359 Downloads 1,782 Views Citations
Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming (Articles)

Mutsumi Takahashi, Masatoshi Takeuchi

Materials Sciences and Applications Vol.15 No.9，September 18, 2024

DOI: 10.4236/msa.2024.159024 34 Downloads 162 Views Citations
Maximal Phase Space Compression (Articles)

Mihai Dima, Marian Petre

Journal of Signal and Information Processing Vol.4 No.2，May 9, 2013

DOI: 10.4236/jsip.2013.42024 3,171 Downloads 4,889 Views Citations
Processed Low NO_x Fly Ash as a Filler in Plastics (Articles)

X. Huang, J.Y. Hwang, J.M. Gillis

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，June 12, 2003

DOI: 10.4236/jmmce.2003.21002 7,450 Downloads 9,989 Views Citations
Research Progress of the Modification in Sulfur Concrete (Articles)

Xuemin You

Materials Sciences and Applications Vol.12 No.7，July 16, 2021

DOI: 10.4236/msa.2021.127024 620 Downloads 2,398 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1，January 29, 2022

DOI: 10.4236/msa.2022.131004 196 Downloads 791 Views Citations
Effect of Molding Technique That Move Model Position Just before Formation in Production of Laminated Mouthguard (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.14 No.6，June 15, 2023

DOI: 10.4236/msa.2023.146020 163 Downloads 580 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4，July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,288 Downloads 2,723 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Adaptive Lossy Image Compression Based on Singular Value Decomposition (Articles)

Marcos Roberto e Souza, Helio Pedrini

Journal of Signal and Information Processing Vol.10 No.3，August 8, 2019

DOI: 10.4236/jsip.2019.103005 1,085 Downloads 2,538 Views Citations
ECG compression and labview implementation (Articles)

Tatiparti Padma, M. Madhavi Latha, Abrar Ahmed

Journal of Biomedical Science and Engineering Vol.2 No.3，May 27, 2009

DOI: 10.4236/jbise.2009.23030 16,896 Downloads 36,580 Views Citations
Distortion of Space and Time during Saccadic Eye Movements (Articles)

M. Suzuki, Y. Yamazaki

Intelligent Information Management Vol.2 No.2，March 16, 2010

DOI: 10.4236/iim.2010.22011 7,439 Downloads 11,660 Views Citations
Lossless Image Compression Technique Using Combination Methods (Articles)

A. Alarabeyyat, S. Al-Hashemi, T. Khdour, M. Hjouj Btoush, S. Bani-Ahmad, R. Al-Hashemi, S. Bani-Ahmad

Journal of Software Engineering and Applications Vol.5 No.10，October 31, 2012

DOI: 10.4236/jsea.2012.510088 10,968 Downloads 18,384 Views Citations
Multimodal compression applied to biomedical data (Articles)

Emre H. Zeybek, Régis Fournier, Amine Naït-Ali

Journal of Biomedical Science and Engineering Vol.5 No.12，December 26, 2012

DOI: 10.4236/jbise.2012.512094 3,758 Downloads 5,773 Views Citations
When an Incompressible Ocean Impacts a Compressible Continent (Articles)

Kern E. Kenyon

Natural Science Vol.13 No.7，July 15, 2021

DOI: 10.4236/ns.2021.137021 210 Downloads 616 Views Citations
Mg/Al complex oxides-A new type of solid basic catalyst for epoxidation (Articles)

Heng Miao, Shi-Chao Xu, Hai-Nan Wang, Wen-Xia Qin, Lin Lin Zhang, Ji-Mei Zhang, Juan Yang, Zhao Dai, Guo Zheng, En-Qi Tang

Journal of Biomedical Science and Engineering Vol.3 No.2，March 1, 2010

DOI: 10.4236/jbise.2010.32028 4,964 Downloads 9,528 Views Citations
Modification and Development of a Blow Molding Machine (Articles)

Bassam A. Al-Helou

Engineering Vol.4 No.4，April 26, 2012

DOI: 10.4236/eng.2012.44025 7,589 Downloads 11,365 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2，April 15, 2013

DOI: 10.4236/ojcm.2013.32004 5,781 Downloads 9,452 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies