Taguchi Analysis - Articles - Scientific Research Publishing

Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method (Articles)

Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 10, 2015

DOI: 10.4236/jmmce.2015.34028 2,876 Downloads 4,094 Views Citations
Experimental Investigation and Process Optimization of Biodiesel Production from Kusum Oil Using Taguchi Method (Articles)

Rabiranjan Murmu, Harekrushna Sutar, Sangram Patra

Advances in Chemical Engineering and Science Vol.7 No.4, October 31, 2017

DOI: 10.4236/aces.2017.74033 1,974 Downloads 5,041 Views Citations
Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al₂O₃ Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational Analysis (Articles)

Ashok Kr. Mishra, Vinod Kumar, Rajesh Kr. Srivastava

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.4, July 30, 2014

DOI: 10.4236/jmmce.2014.24040 4,096 Downloads 5,641 Views Citations
Simultaneous Optimization of Correlated Multiple Surface Quality Characteristics of Mild Steel Turned Product (Articles)

Saurav DATTA, Siba Sankar MAHAPATRA

Intelligent Information Management Vol.2 No.1, January 27, 2010

DOI: 10.4236/iim.2010.21004 6,626 Downloads 12,083 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,841 Downloads 20,067 Views Citations
Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique (Articles)

V. C. Uvaraja, N. Natarajan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.8, August 20, 2012

DOI: 10.4236/jmmce.2012.118063 8,935 Downloads 12,682 Views Citations
Preparation & Characterization of Al-5083 Alloy Composites (Articles)

Sourabh Gargatte, Rahul R. Upadhye, Venkatesh S. Dandagi, Srikanth R. Desai, Bhimappa S. Waghamode

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.1, January 26, 2013

DOI: 10.4236/jmmce.2013.11002 5,569 Downloads 9,494 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1, January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,693 Downloads 6,786 Views Citations
A Comparative Study on Dry Sliding Wear Characteristics of Al₂O₃ and Bone Powder Filled Hybrid Composites (Articles)

Sudeep Deshpande, T. Rangaswamy

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.2, March 30, 2016

DOI: 10.4236/jmmce.2016.42016 2,736 Downloads 4,172 Views Citations
Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Modeling and Numerical Simulation of Material Science Vol.10 No.3, July 17, 2020

DOI: 10.4236/mnsms.2020.103003 832 Downloads 2,181 Views Citations
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic (Articles)

Sri P. Mohana Reddy, Pathi Venkataramaiah, Devuru Vishnu Vardhan Reddy

Energy and Power Engineering Vol.6 No.14, December 12, 2014

DOI: 10.4236/epe.2014.614046 4,039 Downloads 5,978 Views Citations
A New Model for Strategy Formulation Using Mahalanobis-Taguchi System and Clustering Algorithm (Articles)

Ali Hadighi, Iraj Mahdavi

Intelligent Information Management Vol.3 No.5, September 20, 2011

DOI: 10.4236/iim.2011.35024 5,344 Downloads 10,005 Views Citations
Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites - A Taguchi Approach (Articles)

S.R. Chauhan, Anoop Kumar, I. Singh, Prashant Kumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.4, April 20, 2010

DOI: 10.4236/jmmce.2010.94027 7,798 Downloads 11,598 Views Citations
Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis (Articles)

Suman Kalyan Das, Prasanta Sahoo

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.14, November 25, 2011

DOI: 10.4236/jmmce.2011.1014103 6,909 Downloads 9,687 Views Citations
Minimalization of Ash from Iranian Gilsonite by Froth Flotation (Articles)

Ramona Javadi Doodran, Shayan Khakmardan, Aref Shirazi, Adel Shirazy

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, December 23, 2020

DOI: 10.4236/jmmce.2021.91001 711 Downloads 2,997 Views Citations
Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study (Articles)

Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos

Engineering Vol.3 No.2, March 18, 2011

DOI: 10.4236/eng.2011.32017 12,711 Downloads 27,537 Views Citations
Investigation and Optimization of Sn/Gr Lubricants Effects on Cold Extrudability of Fe-TiC Nanocomposite Using Taguchi Robust Design Method (Articles)

Seyed Abdolkarim Sajjadi, Seyed Mojtaba Zebarjad, Nasrin Sasani, Heydar Khadivi, Behrooz Naderi

Engineering Vol.3 No.7, July 20, 2011

DOI: 10.4236/eng.2011.37083 4,773 Downloads 8,563 Views Citations
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach (Articles)

S. Basavarajappa, K.V. Arun, J. Paulo Davim

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.5, May 20, 2009

DOI: 10.4236/jmmce.2009.85034 8,447 Downloads 12,541 Views Citations
Dry Sliding Wear Behaviour of Aluminium/Be₃Al₂(SiO₃)₆ Composite Using Taguchi Method (Articles)

H. B. Bhaskar, Abdul Sharief

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117052 6,001 Downloads 9,062 Views Citations
Utilization of Industrial Waste Slag as Aggregate in Concrete Applications by Adopting Taguchi’s Approach for Optimization (Articles)

Mohammed Nadeem, Arun D. Pofale

Open Journal of Civil Engineering Vol.2 No.3, September 27, 2012

DOI: 10.4236/ojce.2012.23015 12,340 Downloads 23,357 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies